3 # /etc/rc.d/rc.sysinit - run once at boot time
5 # Taken in part from Miquel van Smoorenburg's bcheckrc.
8 # reasonable start values for bootsplash progress.
14 if [ -r /etc/sysconfig/i18n ]; then
16 [ -n "$LANG" ] && export LANG || unset LANG
17 [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
18 [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
19 [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
20 [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
21 [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
22 [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
23 [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
24 [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
25 [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
28 # Read network config data
29 if [ -r /etc/sysconfig/network ]; then
30 . /etc/sysconfig/network
39 . /lib/rc-scripts/functions
43 if [ "$modprobe_c_cache" ]; then
44 echo "$modprobe_c_cache"
48 # filter only what is wanted by this script: aliases and options
49 modprobe_c_cache=$(modprobe -c | grep -E '^(alias|options)')
52 # parse kernel cmdline
56 read cmdline < /proc/cmdline
58 for arg in $cmdline; do
61 # default is set in /etc/sysconfig/system
65 # default is set in /etc/sysconfig/system
69 # default is set in /etc/sysconfig/system
73 # default is set in /etc/sysconfig/system
101 # resolve a device node to its major:minor numbers in decimal or hex
103 local dev=$1 enc=${2:-hex} res
105 res=$(stat -Lc "%t:%T" "$dev")
106 if [ "$enc" = dec ]; then
111 res=$((0x$1)):$((0x$2))
116 # setup SELINUX variable
119 if is_no "$SELINUX"; then
123 if ! grep -Fq selinuxfs /proc/filesystems; then
124 # no support in kernel, no chance
126 elif ! is_fsmounted selinuxfs /selinux; then
127 mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
130 # Check SELinux status
131 local selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
133 if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
134 if [ -r $selinuxfs/enforce ] ; then
135 SELINUX=$(cat $selinuxfs/enforce)
137 # assume enforcing if you can't read it
144 local _d selinuxfs _t _r
146 while read _d selinuxfs _t _r; do
147 [ "$_t" = "selinuxfs" ] && break
149 echo "*** Warning -- SELinux is active"
150 echo "*** Disabling security enforcement for system recovery."
151 echo "*** Run 'setenforce 1' to reenable."
152 echo "0" > $selinuxfs/enforce
156 local _d selinuxfs _t _r
158 while read _d selinuxfs _t _r; do
159 [ "$_t" = "selinuxfs" ] && break
162 *** Warning -- SELinux relabel is required. ***
163 *** Disabling security enforcement. ***
164 *** Relabeling could take a very long time, ***
165 *** depending on file system size. ***
167 echo "0" > $selinuxfs/enforce
168 /sbin/fixfiles -F relabel > /dev/null 2>&1
170 echo "*** Enabling security enforcement. ***"
171 echo $SELINUX > $selinuxfs/enforce
174 # Enable automatic swapon of all partitions with the proper swap magic.
175 # This allows setting up swap without editing /etc/fstab.
177 local swappartitions=$(blkid -t TYPE=swap -o device)
178 if [ -z "$swappartitions" ]; then
182 local curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do echo -n " "; get_numeric_dev $x; echo -n " "; done)
185 for partition in $swappartitions; do
186 [ ! -e $partition ] && continue
187 majmin=$(get_numeric_dev $partition)
188 if ! strstr "$curswap" " $majmin "; then
189 run_cmd "$(nls 'Enabling local swap partitions: %s' $partition)" swapon $partition
196 run_cmd "Activating swap" swapon -a "$@"
197 is_yes "$AUTOSWAP" && enable_autoswap
200 # Remove duplicate entries from mtab (for vserver guest use only)
201 clean_vserver_mtab() {
203 while read device mountpoint line; do
204 grep -qs "$mountpoint" /etc/mtab.clean || \
205 echo "$device $mountpoint $line" >> /etc/mtab.clean
207 cat /etc/mtab.clean > /etc/mtab
208 rm -f /etc/mtab.clean
211 # Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
212 load_kernel_modules() {
213 local modules_file=$1
214 local _x _y _z v v1 old_IFS kernel kerneleq
218 # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
231 # Loop over every line in modules file
233 grep -hvE '^(#|[[:blank:]]*$)' /etc/$modules_file /etc/$modules_file.$kernel /etc/$modules_file.$kerneleq 2>/dev/null
234 echo '' # make sure there is a LF at the end
235 ) | while read module args; do
236 [ -z "$module" ] && continue
239 show "Loading %s kernel module(s)" "$module"
241 modprobe -s $module -- $args && ok || fail
245 # launch repair shell
246 # which after exiting will reboot
250 # don't use '\n' in nls macro !
254 nls "*** Dropping you to a shell; the system will reboot"
255 nls "*** when you leave the shell."
258 [ "$SELINUX" = "1" ] && disable_selinux
259 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
265 run_cmd "Unmounting file systems" umount -a
266 run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
267 run_cmd "Automatic reboot in progress" reboot
271 show "Checking root filesystem"; started
272 initlog -c "fsck -C -T -a $fsckoptions /"
275 # A return of 4 or higher means there were serious problems.
276 if [ $rc -gt 3 ]; then
277 [ -e /proc/splash ] && echo "verbose" > /proc/splash
279 PS1="$(nls '(Repair filesystem)# ')"; export PS1
280 repair_shell "$(nls '*** An error occurred during the file system check.')"
282 # A return of 2 or 3 means that filesystem was repaired but we need
284 elif [ "$rc" = "2" -o "$rc" = "3" ]; then
285 [ -e /proc/splash ] && echo "verbose" > /proc/splash
287 nls "*** Filesystem was repaired but system needs to be"
288 nls "*** rebooted before mounting it."
289 nls "*** REBOOTING ***"
292 run_cmd "Unmounting file systems" umount -a
293 mount -n -o remount,ro /
294 run_cmd "Automatic reboot in progress" reboot
295 elif [ "$rc" = "1" ]; then
300 # Init software RAID arrays
304 if [ ! -x /sbin/mdadm ]; then
309 if [ ! -f /proc/mdstat ]; then
313 show "Starting up RAID devices"; busy
314 output=$(/sbin/mdadm --assemble --scan 2>&1)
317 if [ -n "$output" ]; then
324 if [ ! -x /sbin/vgscan -o ! -x /sbin/vgchange ] && ! is_yes "$EVMS_LVM"; then
328 if is_no "$LVM2"; then
329 lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
334 if [ "$lvmversion" = "1" ] ; then
338 elif [ "$lvmversion" = "2" ] ; then
340 lvmignorelocking="--ignorelockingfailure"
341 lvmsysinit="--sysinit"
344 # device mapper (2.5+ and patched 2.4)
350 run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
351 run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
353 if [ "$lvmversion" = "2" ]; then
354 # silently refresh LV /dev nodes (just in case)
355 /sbin/vgmknodes $lvmignorelocking 1>/dev/null 2>&1
356 # display VG statistics
357 /sbin/vgdisplay -s $lvmignorelocking
361 # boot logging to /var/log/boot.log. install showconsole package to get it.
362 if ! is_no "$RC_BOOTLOG" && [ -x /sbin/blogd ]; then
368 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
369 # we need /proc mounted before everything
370 is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
375 is_fsmounted tmpfs /run || mount -n -t tmpfs run /run -o mode=0755,noexec,nosuid,nodev
381 # sysfs is also needed before any other things (under kernel > 2.5)
382 if ! is_fsmounted sysfs /sys; then
383 grep -Fq sysfs /proc/filesystems && mount -n -o gid=17 -t sysfs sysfs /sys
385 if grep -Fq securityfs /proc/filesystems; then
386 mount -n -t securityfs securityfs /sys/kernel/security
388 if [ -d /sys/firmware/efi ] && ! is_fsmounted efivarfs /sys/firmware/efi/efivars; then
389 mount -n -o rw -t efivarfs efivarfs /sys/firmware/efi/efivars
394 # TLD Linux LiveCD support
395 if [ -x /etc/rc.d/rc.live ]; then
399 # Choose Hardware profile
400 if ! is_no "$HWPROFILES" && [ -f /etc/sysconfig/hwprof ]; then
401 . /etc/sysconfig/hwprof
402 if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
403 mount -n / -o rw,remount
405 mount -n / -o ro,remount
409 # Disable splash when requested
410 is_no "$BOOT_SPLASH" && [ -e /proc/splash ] && echo "0" > /proc/splash
412 if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then
413 /sbin/restorecon -R /dev 2>/dev/null
416 [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)"
418 if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
424 # Print welcome message
425 nls "\t\t\t%sPowered by %sTLD Linux%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CTLD)" "$(termput op)"
426 if ! is_no "$RC_PROMPT"; then
427 nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)"
432 if [ -z "${HOSTNAME}" ]; then
433 show "$(nls 'Host:') $(hostname)"; ok
435 run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
438 # Set the NIS domain name
439 if [ -n "$NISDOMAIN" ]; then
440 run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
445 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
446 # Set console loglevel
447 if [ -n "$CONSOLE_LOGLEVEL" ]; then
448 dmesg -n $CONSOLE_LOGLEVEL
451 if ! is_no "$START_UDEV" && [ -x /sbin/start_udev ] && [[ "$container" != lxc* ]]; then
452 is_fsmounted devtmpfs /dev || mount -n -t devtmpfs devtmpfs /dev
453 load_kernel_modules modules.preudev
455 elif [ -x /lib/firmware/firmware-loader.sh ]; then
456 /sbin/sysctl -q -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh
459 # Unmount the initrd, if necessary
460 if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then
461 umount /initrd/dev 2>/dev/null
463 /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
466 # Start logging console output since we have all /dev stuff setup
467 if [ "$RC_BOOTLOG" ]; then
471 # Configure Linux kernel (initial configuration, some required modules still may be missing).
474 # Check if timezone definition is available
475 if [ -e /etc/localtime ] && [ -e /dev/rtc -o -e /dev/rtc0 ] ; then
476 if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
477 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
480 TIME_SETUP_DELAYED=yes
484 if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
485 # XXX might need modules dep
486 # Device mapper & related initialization
487 if ! grep -qF device-mapper /proc/devices; then
491 . /etc/rc.d/init.d/cryptsetup
492 show "Starting disk encryption"
495 [ $delay_cryptsetup = 0 ] && ok || fail
501 # Initialize USB controllers
503 if [ -z "$nousb" ] && ! is_fsmounted usbfs /proc/bus/usb; then
504 aliases=$(modprobe_c | awk '/^alias[[:space:]]+usb[-_]controller[[:space:]]+/{ print $3 }')
505 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
507 for alias in $aliases ; do
508 [ "$alias" = "off" ] && continue
509 run_cmd "$(nls 'Initializing USB controller') ($alias)" modprobe -s $alias
511 [ $? -eq 0 -a -n "$aliases" ] && usb=1
513 if grep -iq "usb" /proc/devices 2>/dev/null ; then
518 if [ "$usb" = "1" -a -d /proc/bus/usb ] && ! is_fsmounted usbfs /proc/bus/usb; then
519 run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
523 if [ "$usb" = "1" ]; then
524 needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null | grep -e "^I.*Cls=08" 2>/dev/null)
525 if [ "$(kernelverser)" -lt "002006" ]; then
526 grep -Fq 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe -s hid
527 mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
528 kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
529 if [ -n "$kbdoutput" ]; then
530 run_cmd "Initializing USB keyboard" modprobe -s keybdev
532 if [ -n "$mouseoutput" ]; then
533 run_cmd "Initializing USB mouse" modprobe -s mousedev
538 # Setup hdparm thing (if exists and is needed)
539 if [ -z "$nohdparm" ]; then
540 [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
543 if [ -z "$fastboot" ] && [ -f /fastboot ]; then
547 if [ -f /fsckoptions ]; then
548 fsckoptions=$(cat /fsckoptions)
553 if [ -f /forcefsck ]; then
554 fsckoptions="-f $fsckoptions"
556 # Obey the fs_passno setting for / (see fstab(5))
558 # - make sure we have at least 6 fields
559 _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab)
563 _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
564 _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
566 if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "tmpfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
570 # set up pnp and kernel pnp
571 if is_yes "$RUN_USERPNP" || is_yes "$RUN_KERNELPNP"; then
572 if [ -z "$nopnp" ] && is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
573 run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
575 if [ -z "$nopnp" ] && is_yes "$RUN_KERNELPNP"; then
577 if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
578 show "Setting up ISA PNP devices (kernelspace pnp)"; busy
579 grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
584 _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab)
585 # Remount the root filesystem read-write
586 if [ -z "$_ROOTFS_RO" ]; then
587 run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
590 # Update quotas if fsck was run on /
591 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
592 run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug /
595 # Clean up SELinux labels
596 if is_yes "$SELINUX"; then
597 for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache; do
598 [ -r $file ] && restorecon $file >/dev/null 2>&1
602 if [ "$delay_cryptsetup" != 0 ]; then
603 show "Starting disk encryption using the RNG"
606 [ $delay_cryptsetup = 0 ] && ok || fail
609 # Start logging console output since we have all /dev stuff setup
610 if [ "$RC_BOOTLOG" ]; then
615 # Remove stale backups
616 rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1
618 # Remove /etc/nologin when starting system
619 [ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
621 if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
622 show "Enabling Delay Login"; busy
624 nls "System bootup in progress - please wait" >> /etc/nologin
626 chmod 644 /etc/nologin
627 cp -fp /etc/nologin /etc/nologin.boot
631 # The root filesystem is now read-write, so we can now log via
632 # syslog() directly...
633 if [ -n "$IN_INITLOG" ]; then
637 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
640 [ -f /etc/cryptomtab ] && > /etc/cryptomtab
642 # Enter root, /proc, /sys and other into mtab.
643 mount -f / 2> /dev/null
644 mount -f /proc 2> /dev/null
645 if is_fsmounted devtmpfs /dev; then
646 mount -f -t devtmpfs devtmpfs /dev 2> /dev/null
648 if is_fsmounted tmpfs /run; then
649 mount -f -t tmpfs run /run -o mode=0755,noexec,nosuid,nodev 2> /dev/null
652 if is_fsmounted usbfs /proc/bus/usb; then
653 mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb 2> /dev/null
656 if is_fsmounted sysfs /sys; then
657 mount -f -t sysfs sysfs /sys 2> /dev/null
658 if is_fsmounted securityfs /sys/kernel/security ; then
659 mount -f -t securityfs securityfs /sys/kernel/security 2> /dev/null
661 if [ -d /sys/firmware/efi ] && is_fsmounted efivarfs /sys/firmware/efi/efivars ; then
662 mount -f -t efivarfs efivarfs /sys/firmware/efi/efivars 2> /dev/null
666 if is_fsmounted selinuxfs /selinux; then
667 mount -f -t selinuxfs selinuxfs /selinux 2> /dev/null
670 if [ ! -f /proc/modules ]; then
672 elif [ -z "$nomodules" ]; then
679 # Adjust symlinks as necessary in /boot to keep system services from
680 # spewing messages about mismatched System maps and so on.
681 if ! is_no "$SET_SLINKS"; then
682 if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
683 ln -s -f System.map-$uname_r /boot/System.map
685 if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
686 ln -s -f System.map-$uname_r /boot/System.map
690 # Run depmod if RUN_DEPMOD != "no" and:
691 # a) user requested or RUN_DEPMOD="";
692 # b) modules.dep is missing
693 if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
694 if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then
695 run_cmd "Finding module dependencies" depmod -a
696 elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then
697 run_cmd "Finding module dependencies" depmod -A
702 if [ -f /proc/sys/kernel/modprobe ]; then
703 if [ -n "$USEMODULES" ]; then
704 sysctl -q -w kernel.modprobe="/sbin/modprobe"
706 # We used to set this to NULL, but that causes
707 # 'failed to exec' messages"
708 sysctl -q -w kernel.modprobe="/bin/true"
712 # Load usb storage here, to match most other things
713 if [ -n "$needusbstorage" ]; then
714 modprobe -s usb-storage
717 # Load firewire devices
718 if [ -z "$nofirewire" ]; then
719 aliases=$(modprobe_c | awk '/^alias[[:space:]]+ieee1394[-_]controller[[:space:]]+/{ print $3 }')
720 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
721 for alias in $aliases ; do
722 [ "$alias" = "off" ] && continue
723 run_cmd "$(nls 'Initializing firewire controller') ($alias)" modprobe $alias
725 grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && modprobe -s sbp2
729 # Load sound modules if they need persistent DMA buffers
730 if modprobe_c | grep -q "^options sound dmabuf=1"; then
732 alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[[:space:]]+/{ print $3 }')
733 if [ -n "$alias" -a "$alias" != "off" ] ; then
734 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
737 alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[-_]slot[-_]0[[:space:]]+/ { print $3 }')
738 if [ -n "$alias" -a "$alias" != "off" ] ; then
739 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
745 load_kernel_modules modules
746 for f in /etc/modules-load.d/*.conf; do
747 # already loaded by implicit "modules" load
748 [ "${f##*/}" = "modules.conf" ] && continue
750 [ -r $f ] || continue
751 load_kernel_modules ${f##/etc/}
754 if ! is_no "$DM_MULTIPATH" && [ -x /sbin/multipath ]; then
756 modprobe -s dm-multipath
757 # make nodes that were discarded due (possible) new /dev mount
758 /sbin/dmsetup mknodes
759 run_cmd "Activating dm-multipath" /sbin/multipath -v 0
760 /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
763 if ! is_no "$DMRAID" && [ -x /sbin/dmraid ]; then
764 run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
767 # Find and activate volume groups:
769 if is_yes "$EVMS_LVM" && [ -x /sbin/evms_activate ]; then
770 if [ "$(kernelverser)" -lt "002006" ]; then
771 # Linux 2.4 core modules
773 modprobe -s evms_passthru
777 # Linux 2.6 core module
781 is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part
782 is_yes "$EVMS_LVM" && modprobe -s lvm_vge
783 is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge
784 is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge
785 run_cmd "Discovering EVMS volumes" /sbin/evms_activate
786 if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
787 # Link nodes for compatibility with LVM
788 if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then
789 ln -s /dev/evms/lvm/* /dev
794 if ! is_no "$MDADM"; then
798 if ! is_no "$LVM2"; then
802 if [ "$delay_cryptsetup" != 0 ]; then
803 show "Starting disk encryption"
806 [ $delay_cryptsetup = 0 ] && ok || fail
811 if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then
812 rc_splash "fsck start"
813 show "Checking filesystems"; started
814 initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
818 # A return of 2 or higher means there were serious problems
819 if [ $rc -gt 1 ]; then
820 [ -e /proc/splash ] && echo "verbose" > /proc/splash
822 PS1="$(nls '(Repair filesystem)# ')"; export PS1
823 repair_shell "$(nls '*** An error occurred during the file system check.')"
825 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
828 rc_splash "fsck stop"
831 # Mount all other filesystems (except for NFS and /proc, which is already
832 # mounted). Contrary to standard usage,
833 # filesystems are NOT unmounted in single user mode.
834 run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
836 # now we have /usr mounted, recheck if we have gettext and tput available.
837 if is_no "$TPUT"; then
843 # Now do some workaround - encrypted filesystems couldn't have been fsck-ed
844 # before mount - that's where the password is entered.
845 # mount is buggy - when remounting loopback filesystem, loop=XXX
846 # option is removed from /etc/mtab
847 if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then
848 show "Checking encrypted filesystems"; started
849 LOOPLIST="$(LC_ALL=C awk '
850 FILENAME=="/proc/mounts" {
853 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && /[^a-zA-Z_]ro[^a-zA-Z_]/ {
854 if ($2 in TAB){print TAB[$2];}
856 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
857 if ($2 in TAB){print TAB[$2];}
858 sub("loop(=[^,]*)?","loop=" TAB[$2] ",ro",$4);
859 cmd="mount " $2 " -o remount," $4;
862 ' /proc/mounts /etc/fstab)"
863 initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST"
866 # A return of 2 or higher means there were serious problems.
867 if [ $rc -gt 1 ]; then
868 [ -e /proc/splash ] && echo "verbose" > /proc/splash
870 PS1="$(nls '(Repair filesystem)# ')"; export PS1
871 repair_shell "$(nls '*** An error occurred during the file system check.')"
873 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
877 show "Remounting encrypted filesystems back in rw mode"; busy
879 FILENAME=="/proc/mounts" {
882 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
883 sub("loop(=[^,]*)?","loop=" TAB[$2] ",rw",$4);
884 cmd="mount " $2 " -o remount," $4;
887 ' /proc/mounts /etc/fstab
891 # /var/log should be writable now, so start saving the boot output
892 if [ "$RC_BOOTLOG" ]; then
893 echo > /var/log/boot.log
897 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
898 run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
902 if [ -x /sbin/quotaon ]; then
903 run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
906 # Turn on process accounting
907 if [ -x /etc/rc.d/rc.acct ]; then
908 /etc/rc.d/rc.acct start
911 # Set the clock if timezone definition wasn't available (eg. /usr not mounted)
912 if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc -o -e /dev/rtc0 ]; then
913 if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
914 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
918 # Initialize the serial ports
919 if [ -f /etc/rc.d/rc.serial ]; then
920 . /etc/rc.d/rc.serial
923 if [ -n "$PANIC_REBOOT_TIME" ] && [ "$PANIC_REBOOT_TIME" -gt "0" ] && [ -f /proc/sys/kernel/panic ]; then
924 show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
925 # DEPRECATED: use /etc/sysctl.conf or kernel commandline instead
926 if sysctl -q -w kernel.panic=$PANIC_REBOOT_TIME; then ok; else fail; fi
929 # ... and here finish configuring parameters
932 # /var/log should be writable now, so start saving the boot output
933 if [ "$RC_BOOTLOG" ]; then
934 echo > /var/log/boot.log
941 is_yes "$SELINUX" && [ -f /.autorelabel ] && relabel_selinux
944 rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1
947 # /usr could be still not mounted if it is on NFS.
948 for afile in /var/lock/* /var/run/*; do
950 if [ -d "$afile" ]; then
955 echo $afile/* | xargs rm -rf
959 [ "$bafile" != "hwprofile" -a "$bafile" != "random-seed" ] && rm -f $afile 2> /dev/null
964 rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
965 /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
966 rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
967 /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
968 /tmp/scrollkeeper-* /tmp/ssh-*
974 if [ -e /var/log/wtmpx ]; then
975 if [ -e /var/log/wtmp ]; then
978 mv /var/log/wtmpx /var/log/wtmp
982 chown root:utmp /var/run/utmp /var/log/wtmp
983 chmod 0664 /var/run/utmp /var/log/wtmp
986 if is_yes "$CLEAN_TMP" && ! is_fsmounted tmpfs /tmp; then
987 LC_ALL=C rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
990 # System protected dirs
991 mkdir -m 1777 -p /tmp/.ICE-unix > /dev/null 2>&1
992 chown root:root /tmp/.ICE-unix
993 is_yes "$SELINUX" && restorecon /tmp/.ICE-unix >/dev/null 2>&1
995 test -d /var/run/netreport || mkdir -m 770 /var/run/netreport
997 if ! is_yes "$VSERVER"; then
1000 # If a SCSI tape has been detected, load the st module unconditionally
1001 # since many SCSI tapes don't deal well with st being loaded and unloaded
1002 if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
1003 if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
1004 if [ -n "$USEMODULES" ] ; then
1005 # Try to load the module. If it fails, ignore it...
1006 insmod -p st >/dev/null 2>&1 && modprobe -s st
1011 # Now that we have all of our basic modules loaded and the kernel going,
1012 # let's dump the syslog ring somewhere so we can find it later
1014 if [ "$(cat /proc/sys/kernel/dmesg_restrict)" = 0 ]; then
1017 dmesg --raw > /var/log/dmesg
1018 chmod $mode /var/log/dmesg
1020 while [ $i -ge 0 ]; do
1021 if [ -f /var/log/dmesg.$i ]; then
1022 mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
1026 cp -pf /var/log/dmesg /var/log/dmesg.0
1029 if ! is_no "$RC_PROMPT"; then
1031 pid=$(/sbin/pidof getkey)
1032 [ -n "$pid" -o -e /var/run/getkey_done ] && break
1035 [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
1039 # /proc extra check if the background process we just spawned is still running,
1040 # as in case of vserver bootup it finishes quite instantly.
1041 if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
1042 /sbin/getkey i && touch /var/run/confirm
1043 touch /var/run/getkey_done
1046 if ! is_no "$RC_PROMPT"; then
1047 rm -f /var/run/getkey_done