3 # /etc/rc.d/rc.sysinit - run once at boot time
5 # Taken in part from Miquel van Smoorenburg's bcheckrc.
8 # reasonable start values for bootsplash progress.
14 if [ -r /etc/sysconfig/i18n ]; then
16 [ -n "$LANG" ] && export LANG || unset LANG
17 [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
18 [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
19 [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
20 [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
21 [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
22 [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
23 [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
24 [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
25 [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
28 # Read network config data
29 if [ -r /etc/sysconfig/network ]; then
30 . /etc/sysconfig/network
39 . /lib/rc-scripts/functions
43 if [ "$modprobe_c_cache" ]; then
44 echo "$modprobe_c_cache"
48 # filter only what is wanted by this script: aliases and options
49 modprobe_c_cache=$(modprobe -c | grep -E '^(alias|options)')
52 # parse kernel cmdline
56 read cmdline < /proc/cmdline
58 for arg in $cmdline; do
61 # default is set in /etc/sysconfig/system
65 # default is set in /etc/sysconfig/system
69 # default is set in /etc/sysconfig/system
73 # default is set in /etc/sysconfig/system
101 # resolve a device node to its major:minor numbers in decimal or hex
103 local dev=$1 enc=${2:-hex} res
105 res=$(stat -Lc "%t:%T" "$dev")
106 if [ "$enc" = dec ]; then
111 res=$((0x$1)):$((0x$2))
116 # setup SELINUX variable
119 if is_no "$SELINUX"; then
123 if ! grep -Fq selinuxfs /proc/filesystems; then
124 # no support in kernel, no chance
128 if ! is_fsmounted selinuxfs /selinux; then
129 mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
132 # Check SELinux status
133 local selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
135 if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
136 if [ -r $selinuxfs/enforce ] ; then
137 SELINUX=$(cat $selinuxfs/enforce)
139 # assume enforcing if you can't read it
146 local _d selinuxfs _t _r
148 while read _d selinuxfs _t _r; do
149 [ "$_t" = "selinuxfs" ] && break
151 echo "*** Warning -- SELinux is active"
152 echo "*** Disabling security enforcement for system recovery."
153 echo "*** Run 'setenforce 1' to reenable."
154 echo "0" > $selinuxfs/enforce
158 local _d selinuxfs _t _r
160 while read _d selinuxfs _t _r; do
161 [ "$_t" = "selinuxfs" ] && break
164 *** Warning -- SELinux relabel is required. ***
165 *** Disabling security enforcement. ***
166 *** Relabeling could take a very long time, ***
167 *** depending on file system size. ***
169 echo "0" > $selinuxfs/enforce
170 /sbin/fixfiles -F relabel > /dev/null 2>&1
172 echo "*** Enabling security enforcement. ***"
173 echo $SELINUX > $selinuxfs/enforce
176 # Enable automatic swapon of all partitions with the proper swap magic.
177 # This allows setting up swap without editing /etc/fstab.
179 local swappartitions=$(blkid -t TYPE=swap -o device)
180 if [ -z "$swappartitions" ]; then
184 local curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do echo -n " "; get_numeric_dev $x; echo -n " "; done)
187 for partition in $swappartitions; do
188 [ ! -e $partition ] && continue
189 majmin=$(get_numeric_dev $partition)
190 if ! strstr "$curswap" " $majmin "; then
191 run_cmd "$(nls 'Enabling local swap partitions: %s' $partition)" swapon $partition
198 run_cmd "Activating swap" swapon -a "$@"
199 is_yes "$AUTOSWAP" && enable_autoswap
202 # Remove duplicate entries from mtab (for vserver guest use only)
203 clean_vserver_mtab() {
205 while read device mountpoint line; do
206 grep -qs "$mountpoint" /etc/mtab.clean || \
207 echo "$device $mountpoint $line" >> /etc/mtab.clean
209 cat /etc/mtab.clean > /etc/mtab
210 rm -f /etc/mtab.clean
213 # Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
214 load_kernel_modules() {
215 local modules_file=$1
216 local _x _y _z v v1 old_IFS kernel kerneleq
220 # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
233 # Loop over every line in modules file
235 grep -hvE '^(#|[[:blank:]]*$)' /etc/$modules_file /etc/$modules_file.$kernel /etc/$modules_file.$kerneleq 2>/dev/null
236 echo '' # make sure there is a LF at the end
237 ) | while read module args; do
238 [ -z "$module" ] && continue
241 show "Loading %s kernel module(s)" "$module"
243 modprobe -s $module -- $args && ok || fail
247 # launch repair shell
248 # which after exiting will reboot
252 # don't use '\n' in nls macro !
256 nls "*** Dropping you to a shell; the system will reboot"
257 nls "*** when you leave the shell."
260 [ "$SELINUX" = "1" ] && disable_selinux
261 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
267 run_cmd "Unmounting file systems" umount -a
268 run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
269 run_cmd "Automatic reboot in progress" reboot
273 show "Checking root filesystem"; started
274 initlog -c "fsck -C -T -a $fsckoptions /"
277 # A return of 4 or higher means there were serious problems.
278 if [ $rc -gt 3 ]; then
279 [ -e /proc/splash ] && echo "verbose" > /proc/splash
281 PS1="$(nls '(Repair filesystem)# ')"; export PS1
282 repair_shell "$(nls '*** An error occurred during the file system check.')"
284 # A return of 2 or 3 means that filesystem was repaired but we need
286 elif [ "$rc" = "2" -o "$rc" = "3" ]; then
287 [ -e /proc/splash ] && echo "verbose" > /proc/splash
289 nls "*** Filesystem was repaired but system needs to be"
290 nls "*** rebooted before mounting it."
291 nls "*** REBOOTING ***"
294 run_cmd "Unmounting file systems" umount -a
295 mount -n -o remount,ro /
296 run_cmd "Automatic reboot in progress" reboot
297 elif [ "$rc" = "1" ]; then
302 # mdadm - manage MD devices aka Linux Software RAID
304 if [ ! -x /sbin/mdadm -o ! -f /etc/mdadm.conf ]; then
309 local rc=0 golvm=0 have_md=0
310 if [ ! -f /proc/mdstat ]; then
314 # assume we have md if at least one ARRAY line is present
315 if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf; then
318 # configured to do auto scanning
319 if [ $have_md = 0 ] && grep -qE "^([[:blank:]]|)DEVICE[[:blank:]]partitions" /etc/mdadm.conf; then
324 if [ $have_md = 0 ]; then
328 show "Starting up RAID devices"; busy
329 /sbin/mdadm --assemble --scan --auto=yes
331 if [ "$rc" -eq 0 -o "$rc" -eq 2 ]; then
332 # rc is used later too, so set sane value
340 # A non-zero return means there were problems
341 if [ $rc -gt 0 ]; then
342 [ -e /proc/splash ] && echo "verbose" > /proc/splash
343 show "Starting up RAID devices"; fail
345 PS1="$(nls '(RAID Repair)# ')"; export PS1
346 repair_shell "$(nls '*** An error occurred during the RAID startup.')"
349 # LVM on RAID (keep in sync with LVM init)
350 if [ "$golvm" -eq "1" ]; then
351 if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
352 run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelocking
353 run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmsysinit
354 [ "$lvmversion" = "2" ] && /sbin/vgmknodes
357 show "Starting up RAID devices"; ok
363 if [ ! -x /sbin/vgscan -o ! -x /sbin/vgchange ] && ! is_yes "$EVMS_LVM"; then
367 if is_no "$LVM2"; then
368 lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
373 if [ "$lvmversion" = "1" ] ; then
377 elif [ "$lvmversion" = "2" ] ; then
379 lvmignorelocking="--ignorelockingfailure"
380 lvmsysinit="--sysinit"
383 # device mapper (2.5+ and patched 2.4)
389 run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
390 run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
391 if [ "$lvmversion" = "2" ]; then
392 /sbin/vgmknodes $lvmignorelocking
393 # display VG statistics
394 /sbin/vgdisplay -s $lvmignorelocking
398 # boot logging to /var/log/boot.log. install showconsole package to get it.
399 if ! is_no "$RC_BOOTLOG" && [ -x /sbin/blogd ]; then
405 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
406 # we need /proc mounted before everything
407 is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
412 is_fsmounted tmpfs /run || mount -n -t tmpfs run /run
418 # sysfs is also needed before any other things (under kernel > 2.5)
419 if ! is_fsmounted sysfs /sys; then
420 grep -Fq sysfs /proc/filesystems && mount -n -o gid=17 -t sysfs sysfs /sys
422 if grep -Fq securityfs /proc/filesystems; then
423 mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
428 # PLD Linux LiveCD support
429 if [ -x /etc/rc.d/rc.live ]; then
433 # Choose Hardware profile
434 if ! is_no "$HWPROFILES" && [ -f /etc/sysconfig/hwprof ]; then
435 . /etc/sysconfig/hwprof
436 if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
437 mount -n / -o rw,remount
439 mount -n / -o ro,remount
443 # Disable splash when requested
444 is_no "$BOOT_SPLASH" && [ -e /proc/splash ] && echo "0" > /proc/splash
446 if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then
447 /sbin/restorecon -R /dev 2>/dev/null
450 [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)"
452 if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
458 # Print welcome message
459 nls "\t\t\t%sPowered by %sPLD Linux Distribution%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CPLD)" "$(termput op)"
460 if ! is_no "$RC_PROMPT"; then
461 nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)"
466 if [ -z "${HOSTNAME}" ]; then
467 show "$(nls 'Host:') $(hostname)"; ok
469 run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
472 # Set the NIS domain name
473 if [ -n "$NISDOMAIN" ]; then
474 run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
479 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
480 # Set console loglevel
481 if [ -n "$CONSOLE_LOGLEVEL" ]; then
482 dmesg -n $CONSOLE_LOGLEVEL
485 if ! is_no "$START_UDEV" && [ -x /sbin/start_udev ] && [[ "$container" != lxc* ]]; then
486 is_fsmounted devtmpfs /dev || mount -n -t devtmpfs devtmpfs /dev
487 load_kernel_modules modules.preudev
489 elif [ -x /lib/firmware/firmware-loader.sh ]; then
490 /sbin/sysctl -q -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh
493 # Unmount the initrd, if necessary
494 if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then
495 umount /initrd/dev 2>/dev/null
497 /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
500 # Start logging console output since we have all /dev stuff setup
501 if [ "$RC_BOOTLOG" ]; then
505 # Configure Linux kernel (initial configuration, some required modules still may be missing).
508 # Check if timezone definition is available
509 if [ -e /etc/localtime ] && [ -e /dev/rtc -o -e /dev/rtc0 ] ; then
510 if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
511 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
514 TIME_SETUP_DELAYED=yes
518 if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
519 # XXX might need modules dep
520 # Device mapper & related initialization
521 if ! grep -qF device-mapper /proc/devices; then
525 . /etc/rc.d/init.d/cryptsetup
526 show "Starting disk encryption"
529 [ $delay_cryptsetup = 0 ] && ok || fail
535 # Initialize USB controllers
537 if [ -z "$nousb" ] && ! is_fsmounted usbfs /proc/bus/usb; then
538 aliases=$(modprobe_c | awk '/^alias[[:space:]]+usb[-_]controller[[:space:]]+/{ print $3 }')
539 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
541 for alias in $aliases ; do
542 [ "$alias" = "off" ] && continue
543 run_cmd "$(nls 'Initializing USB controller') ($alias)" modprobe -s $alias
545 [ $? -eq 0 -a -n "$aliases" ] && usb=1
547 if grep -iq "usb" /proc/devices 2>/dev/null ; then
552 if [ "$usb" = "1" -a -d /proc/bus/usb ] && ! is_fsmounted usbfs /proc/bus/usb; then
553 run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
557 if [ "$usb" = "1" ]; then
558 needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null | grep -e "^I.*Cls=08" 2>/dev/null)
559 if [ "$(kernelverser)" -lt "002006" ]; then
560 grep -Fq 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe -s hid
561 mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
562 kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
563 if [ -n "$kbdoutput" ]; then
564 run_cmd "Initializing USB keyboard" modprobe -s keybdev
566 if [ -n "$mouseoutput" ]; then
567 run_cmd "Initializing USB mouse" modprobe -s mousedev
572 # Setup hdparm thing (if exists and is needed)
573 if [ -z "$nohdparm" ]; then
574 [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
577 if [ -z "$fastboot" ] && [ -f /fastboot ]; then
581 if [ -f /fsckoptions ]; then
582 fsckoptions=$(cat /fsckoptions)
587 if [ -f /forcefsck ]; then
588 fsckoptions="-f $fsckoptions"
590 # Obey the fs_passno setting for / (see fstab(5))
592 # - make sure we have at least 6 fields
593 _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab)
597 _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
598 _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
600 if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
604 # set up pnp and kernel pnp
605 if is_yes "$RUN_USERPNP" || is_yes "$RUN_KERNELPNP"; then
606 if [ -z "$nopnp" ] && is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
607 run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
609 if [ -z "$nopnp" ] && is_yes "$RUN_KERNELPNP"; then
611 if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
612 show "Setting up ISA PNP devices (kernelspace pnp)"; busy
613 grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
618 _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab)
619 # Remount the root filesystem read-write
620 if [ -z "$_ROOTFS_RO" ]; then
621 run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
624 # Update quotas if fsck was run on /
625 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
626 run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug /
629 # Clean up SELinux labels
630 if is_yes "$SELINUX"; then
631 for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache; do
632 [ -r $file ] && restorecon $file >/dev/null 2>&1
636 if [ "$delay_cryptsetup" != 0 ]; then
637 show "Starting disk encryption using the RNG"
640 [ $delay_cryptsetup = 0 ] && ok || fail
643 # Start logging console output since we have all /dev stuff setup
644 if [ "$RC_BOOTLOG" ]; then
649 # Remove stale backups
650 rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1
652 # Remove /etc/nologin when starting system
653 [ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
655 if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
656 show "Enabling Delay Login"; busy
658 nls "System bootup in progress - please wait" >> /etc/nologin
660 chmod 644 /etc/nologin
661 cp -fp /etc/nologin /etc/nologin.boot
665 # The root filesystem is now read-write, so we can now log via
666 # syslog() directly...
667 if [ -n "$IN_INITLOG" ]; then
671 if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
674 [ -f /etc/cryptomtab ] && > /etc/cryptomtab
676 # Enter root, /proc, /sys and other into mtab.
677 mount -f / 2> /dev/null
678 mount -f /proc 2> /dev/null
679 if is_fsmounted devtmpfs /dev; then
680 mount -f -t devtmpfs devtmpfs /dev 2> /dev/null
682 if is_fsmounted tmpfs /run; then
683 mount -f -t tmpfs run /run 2> /dev/null
686 if is_fsmounted usbfs /proc/bus/usb; then
687 mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb 2> /dev/null
690 if is_fsmounted sysfs /sys; then
691 mount -f -t sysfs sysfs /sys 2> /dev/null
692 if is_fsmounted securityfs /sys/kernel/security ; then
693 mount -f -t securityfs securityfs /sys/kernel/security 2> /dev/null
697 if is_fsmounted selinuxfs /selinux; then
698 mount -f -t selinuxfs selinuxfs /selinux 2> /dev/null
701 if [ ! -f /proc/modules ]; then
703 elif [ -z "$nomodules" ]; then
710 # Adjust symlinks as necessary in /boot to keep system services from
711 # spewing messages about mismatched System maps and so on.
712 if ! is_no "$SET_SLINKS"; then
713 if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
714 ln -s -f System.map-$uname_r /boot/System.map
716 if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
717 ln -s -f System.map-$uname_r /boot/System.map
721 # Run depmod if RUN_DEPMOD != "no" and:
722 # a) user requested or RUN_DEPMOD="";
723 # b) modules.dep is missing
724 if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
725 if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then
726 run_cmd "Finding module dependencies" depmod -a
727 elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then
728 run_cmd "Finding module dependencies" depmod -A
733 if [ -f /proc/sys/kernel/modprobe ]; then
734 if [ -n "$USEMODULES" ]; then
735 sysctl -q -w kernel.modprobe="/sbin/modprobe"
737 # We used to set this to NULL, but that causes
738 # 'failed to exec' messages"
739 sysctl -q -w kernel.modprobe="/bin/true"
743 # Load usb storage here, to match most other things
744 if [ -n "$needusbstorage" ]; then
745 modprobe -s usb-storage
748 # Load firewire devices
749 if [ -z "$nofirewire" ]; then
750 aliases=$(modprobe_c | awk '/^alias[[:space:]]+ieee1394[-_]controller[[:space:]]+/{ print $3 }')
751 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
752 for alias in $aliases ; do
753 [ "$alias" = "off" ] && continue
754 run_cmd "$(nls 'Initializing firewire controller') ($alias)" modprobe $alias
756 grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && modprobe -s sbp2
760 # Load sound modules if they need persistent DMA buffers
761 if modprobe_c | grep -q "^options sound dmabuf=1"; then
763 alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[[:space:]]+/{ print $3 }')
764 if [ -n "$alias" -a "$alias" != "off" ] ; then
765 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
768 alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[-_]slot[-_]0[[:space:]]+/ { print $3 }')
769 if [ -n "$alias" -a "$alias" != "off" ] ; then
770 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
776 load_kernel_modules modules
777 for f in /etc/modules-load.d/*.conf; do
778 # already loaded by implicit "modules" load
779 [ "${f##*/}" = "modules.conf" ] && continue
781 [ -r $f ] || continue
782 load_kernel_modules ${f##/etc/}
785 if ! is_no "$DM_MULTIPATH" && [ -x /sbin/multipath ]; then
787 modprobe -s dm-multipath
788 # make nodes that were discarded due (possible) new /dev mount
789 /sbin/dmsetup mknodes
790 run_cmd "Activating dm-multipath" /sbin/multipath -v 0
791 /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
794 if ! is_no "$DMRAID" && [ -x /sbin/dmraid ]; then
795 run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
798 # Find and activate volume groups:
800 if is_yes "$EVMS_LVM" && [ -x /sbin/evms_activate ]; then
801 if [ "$(kernelverser)" -lt "002006" ]; then
802 # Linux 2.4 core modules
804 modprobe -s evms_passthru
808 # Linux 2.6 core module
812 is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part
813 is_yes "$EVMS_LVM" && modprobe -s lvm_vge
814 is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge
815 is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge
816 run_cmd "Discovering EVMS volumes" /sbin/evms_activate
817 if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
818 # Link nodes for compatibility with LVM
819 if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then
820 ln -s /dev/evms/lvm/* /dev
826 if ! is_no "$LVM2"; then
830 if [ "$delay_cryptsetup" != 0 ]; then
831 show "Starting disk encryption"
834 [ $delay_cryptsetup = 0 ] && ok || fail
837 if ! is_no "$MDADM"; then
843 if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then
844 rc_splash "fsck start"
845 show "Checking filesystems"; started
846 initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
850 # A return of 2 or higher means there were serious problems
851 if [ $rc -gt 1 ]; then
852 [ -e /proc/splash ] && echo "verbose" > /proc/splash
854 PS1="$(nls '(Repair filesystem)# ')"; export PS1
855 repair_shell "$(nls '*** An error occurred during the file system check.')"
857 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
860 rc_splash "fsck stop"
863 # Mount all other filesystems (except for NFS and /proc, which is already
864 # mounted). Contrary to standard usage,
865 # filesystems are NOT unmounted in single user mode.
866 run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
868 # now we have /usr mounted, recheck if we have gettext and tput available.
869 if is_no "$TPUT"; then
875 # Now do some workaround - encrypted filesystems couldn't have been fsck-ed
876 # before mount - that's where the password is entered.
877 # mount is buggy - when remounting loopback filesystem, loop=XXX
878 # option is removed from /etc/mtab
879 if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then
880 show "Checking encrypted filesystems"; started
881 LOOPLIST="$(LC_ALL=C awk '
882 FILENAME=="/proc/mounts" {
885 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && /[^a-zA-Z_]ro[^a-zA-Z_]/ {
886 if ($2 in TAB){print TAB[$2];}
888 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
889 if ($2 in TAB){print TAB[$2];}
890 sub("loop(=[^,]*)?","loop=" TAB[$2] ",ro",$4);
891 cmd="mount " $2 " -o remount," $4;
894 ' /proc/mounts /etc/fstab)"
895 initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST"
898 # A return of 2 or higher means there were serious problems.
899 if [ $rc -gt 1 ]; then
900 [ -e /proc/splash ] && echo "verbose" > /proc/splash
902 PS1="$(nls '(Repair filesystem)# ')"; export PS1
903 repair_shell "$(nls '*** An error occurred during the file system check.')"
905 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
909 show "Remounting encrypted filesystems back in rw mode"; busy
911 FILENAME=="/proc/mounts" {
914 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
915 sub("loop(=[^,]*)?","loop=" TAB[$2] ",rw",$4);
916 cmd="mount " $2 " -o remount," $4;
919 ' /proc/mounts /etc/fstab
923 # /var/log should be writable now, so start saving the boot output
924 if [ "$RC_BOOTLOG" ]; then
925 echo > /var/log/boot.log
929 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
930 run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
934 if [ -x /sbin/quotaon ]; then
935 run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
938 # Turn on process accounting
939 if [ -x /etc/rc.d/rc.acct ]; then
940 /etc/rc.d/rc.acct start
943 # Set the clock if timezone definition wasn't available (eg. /usr not mounted)
944 if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc -o -e /dev/rtc0 ]; then
945 if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
946 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
950 # Initialize the serial ports
951 if [ -f /etc/rc.d/rc.serial ]; then
952 . /etc/rc.d/rc.serial
955 if [ -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" -a -f /proc/sys/kernel/panic ]; then
956 show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
957 # DEPRECATED: use /etc/sysctl.conf or kernel commandline instead
958 if sysctl -q -w kernel.panic=$PANIC_REBOOT_TIME; then ok; else fail; fi
961 # ... and here finish configuring parameters
964 # /var/log should be writable now, so start saving the boot output
965 if [ "$RC_BOOTLOG" ]; then
966 echo > /var/log/boot.log
973 is_yes "$SELINUX" && [ -f /.autorelabel ] && relabel_selinux
976 rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1
979 # /usr could be still not mounted if it is on NFS.
980 for afile in /var/lock/* /var/run/*; do
982 if [ -d "$afile" ]; then
987 echo $afile/* | xargs rm -rf
991 [ "$bafile" != "hwprofile" -a "$bafile" != "random-seed" ] && rm -f $afile 2> /dev/null
996 rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
997 /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
998 rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
999 /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
1000 /tmp/scrollkeeper-* /tmp/ssh-*
1003 # Clean up utmp/wtmp
1004 rm -f /var/run/utmpx
1006 if [ -e /var/log/wtmpx ]; then
1007 if [ -e /var/log/wtmp ]; then
1008 rm -f /var/log/wtmpx
1010 mv /var/log/wtmpx /var/log/wtmp
1014 chown root:utmp /var/run/utmp /var/log/wtmp
1015 chmod 0664 /var/run/utmp /var/log/wtmp
1018 if is_yes "$CLEAN_TMP" && ! is_fsmounted tmpfs /tmp; then
1019 LC_ALL=C rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
1022 # System protected dirs
1023 mkdir -m 1777 -p /tmp/.ICE-unix > /dev/null 2>&1
1024 chown root:root /tmp/.ICE-unix
1025 is_yes "$SELINUX" && restorecon /tmp/.ICE-unix >/dev/null 2>&1
1027 test -d /var/run/netreport || mkdir -m 770 /var/run/netreport
1029 if ! is_yes "$VSERVER"; then
1032 # If a SCSI tape has been detected, load the st module unconditionally
1033 # since many SCSI tapes don't deal well with st being loaded and unloaded
1034 if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
1035 if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
1036 if [ -n "$USEMODULES" ] ; then
1037 # Try to load the module. If it fails, ignore it...
1038 insmod -p st >/dev/null 2>&1 && modprobe -s st
1043 # Now that we have all of our basic modules loaded and the kernel going,
1044 # let's dump the syslog ring somewhere so we can find it later
1046 if [ "$(cat /proc/sys/kernel/dmesg_restrict)" = 0 ]; then
1049 dmesg --raw > /var/log/dmesg
1050 chmod $mode /var/log/dmesg
1052 while [ $i -ge 0 ]; do
1053 if [ -f /var/log/dmesg.$i ]; then
1054 mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
1058 cp -pf /var/log/dmesg /var/log/dmesg.0
1061 if ! is_no "$RC_PROMPT"; then
1063 pid=$(/sbin/pidof getkey)
1064 [ -n "$pid" -o -e /var/run/getkey_done ] && break
1067 [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
1071 # /proc extra check if the background process we just spawned is still running,
1072 # as in case of vserver bootup it finishes quite instantly.
1073 if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
1074 /sbin/getkey i && touch /var/run/confirm
1075 touch /var/run/getkey_done
1078 if ! is_no "$RC_PROMPT"; then
1079 rm -f /var/run/getkey_done