---- php-5.5.7/sapi/fpm/php-fpm.conf.in~ 2013-12-16 17:57:03.000000000 +0200
-+++ php-5.5.7/sapi/fpm/php-fpm.conf.in 2013-12-16 17:58:37.618025260 +0200
+diff -urNpa php-5.6.35.orig/sapi/fpm/php-fpm.conf.in php-5.6.35/sapi/fpm/php-fpm.conf.in
+--- php-5.6.35.orig/sapi/fpm/php-fpm.conf.in 2018-03-28 21:28:58.000000000 +0000
++++ php-5.6.35/sapi/fpm/php-fpm.conf.in 2018-04-12 10:03:34.184687949 +0000
@@ -6,14 +6,6 @@
; prefix (@prefix@). This prefix can be dynamically changed by using the
; '-p' argument from the command line.
-; Relative path can also be used. They will be prefixed by:
-; - the global prefix if it's been set (-p argument)
-; - @prefix@ otherwise
--;include=/etc/php/fpm.d/*.conf
+-;include=etc/fpm.d/*.conf
-
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
-@@ -116,404 +116,10 @@
+@@ -123,421 +115,3 @@
+ ; ports and different management options. The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)
-
+-
-; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('www' here)
-
-; Per pool prefix
-; It only applies on the following directives:
+-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
--; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
+-; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on
+-; a specific port;
+-; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-; a specific port;
--; 'port' - to listen on a TCP socket to all addresses on a
+-; 'port' - to listen on a TCP socket to all IPv4 addresses on a
-; specific port;
+-; '[::]:port' - to listen on a TCP socket to all addresses
+-; (IPv6 and IPv4-mapped) on a specific port;
-; '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
--listen = /var/run/php/@processname@.sock
+-listen = 127.0.0.1:9000
-
-; Set listen(2) backlog.
-; Default Value: 65535 (-1 on FreeBSD and OpenBSD)
-;listen.owner = @php_fpm_user@
-;listen.group = @php_fpm_group@
-;listen.mode = 0660
+-; When POSIX Access Control Lists are supported you can set them using
+-; these options, value is a comma separated list of user/group names.
+-; When set, listen.owner and listen.group are ignored
+-;listen.acl_users =
+-;listen.acl_groups =
-
--; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
--listen.allowed_clients = 127.0.0.1
+-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Default Value: no set
-; process.priority = -19
-
+-; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
+-; or group is differrent than the master process user. It allows to create process
+-; core dump and ptrace the process for the pool user.
+-; Default Value: no
+-; process.dumpable = yes
+-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-; static - a fixed number (pm.max_children) of child processes;
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
--env[PATH] = $PATH
+-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-+; Include one or more files. If glob(3) exists, it is used to include a bunch of
-+; files from a glob(3) pattern. This directive can be used everywhere in the
-+; file.
-+; Relative path can also be used. They will be prefixed by:
-+; - the global prefix if it's been set (-p argument)
-+; - @prefix@ otherwise
-+include=/etc/php/fpm.d/*.conf
---- /dev/null 2007-02-13 18:29:53.000000000 +0200
-+++ php-5.6.0beta1/sapi/fpm/php-fpm.conf-d.in 2014-04-21 21:58:46.191751631 +0300
-@@ -0,0 +1,403 @@
-+; vim:ft=dosini
-+;
+diff -urNpa php-5.6.35.orig/sapi/fpm/php-fpm.conf-d.in php-5.6.35/sapi/fpm/php-fpm.conf-d.in
+--- php-5.6.35.orig/sapi/fpm/php-fpm.conf-d.in 1970-01-01 00:00:00.000000000 +0000
++++ php-5.6.35/sapi/fpm/php-fpm.conf-d.in 2018-04-12 10:04:12.417687518 +0000
+@@ -0,0 +1,417 @@
+; Start a new pool named 'www'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('www' here)
+
+; Per pool prefix
+; It only applies on the following directives:
++; - 'access.log'
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
-+; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
++; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on
++; a specific port;
++; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+; a specific port;
-+; 'port' - to listen on a TCP socket to all addresses on a
++; 'port' - to listen on a TCP socket to all IPv4 addresses on a
+; specific port;
++; '[::]:port' - to listen on a TCP socket to all addresses
++; (IPv6 and IPv4-mapped) on a specific port;
+; '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
-+listen = /var/run/php/@processname@.sock
++listen = 127.0.0.1:9000
+
+; Set listen(2) backlog.
+; Default Value: 65535 (-1 on FreeBSD and OpenBSD)
+;listen.owner = @php_fpm_user@
+;listen.group = @php_fpm_group@
+;listen.mode = 0660
++; When POSIX Access Control Lists are supported you can set them using
++; these options, value is a comma separated list of user/group names.
++; When set, listen.owner and listen.group are ignored
++;listen.acl_users =
++;listen.acl_groups =
+
-+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
++; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
-+listen.allowed_clients = 127.0.0.1
++;listen.allowed_clients = 127.0.0.1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Default Value: no set
+; process.priority = -19
+
++; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
++; or group is differrent than the master process user. It allows to create process
++; core dump and ptrace the process for the pool user.
++; Default Value: no
++; process.dumpable = yes
++
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+; static - a fixed number (pm.max_children) of child processes;
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
-+env[PATH] = $PATH
++;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
---- php-5.5.7/sapi/fpm/config.m4~ 2013-12-16 17:57:03.000000000 +0200
-+++ php-5.5.7/sapi/fpm/config.m4 2013-12-16 18:00:34.936527309 +0200
-@@ -609,7 +609,7 @@
+diff -urNpa php-5.6.35.orig/sapi/fpm/config.m4 php-5.6.35/sapi/fpm/config.m4
+--- php-5.6.35.orig/sapi/fpm/config.m4 2018-03-28 21:28:58.000000000 +0000
++++ php-5.6.35/sapi/fpm/config.m4 2018-04-12 10:02:48.432688464 +0000
+@@ -667,7 +667,7 @@ if test "$PHP_FPM" != "no"; then
PHP_ADD_BUILD_DIR(sapi/fpm/fpm)
PHP_ADD_BUILD_DIR(sapi/fpm/fpm/events)
PHP_ADD_MAKEFILE_FRAGMENT([$abs_srcdir/sapi/fpm/Makefile.frag])
SAPI_FPM_PATH=sapi/fpm/php-fpm
---- php-5.5.7/sapi/fpm/Makefile.frag~ 2013-12-16 17:57:03.000000000 +0200
-+++ php-5.5.7/sapi/fpm/Makefile.frag 2013-12-16 18:01:19.511829907 +0200
-@@ -11,8 +11,9 @@
+diff -urNpa php-5.6.35.orig/sapi/fpm/Makefile.frag php-5.6.35/sapi/fpm/Makefile.frag
+--- php-5.6.35.orig/sapi/fpm/Makefile.frag 2018-03-28 21:28:58.000000000 +0000
++++ php-5.6.35/sapi/fpm/Makefile.frag 2018-04-12 10:02:48.432688464 +0000
+@@ -11,8 +11,9 @@ install-fpm: $(SAPI_FPM_PATH)
@$(INSTALL) -m 0755 $(SAPI_FPM_PATH) $(INSTALL_ROOT)$(sbindir)/$(program_prefix)php-fpm$(program_suffix)$(EXEEXT)
@echo "Installing PHP FPM config: $(INSTALL_ROOT)$(sysconfdir)/" && \
- $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir) || :
+ $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir)/fpm.d || :
- @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf || :
-+ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf || :
+ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf.default || :
++ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf.default || :
@echo "Installing PHP FPM man page: $(INSTALL_ROOT)$(mandir)/man8/"
@$(mkinstalldirs) $(INSTALL_ROOT)$(mandir)/man8