X-Git-Url: https://git.tld-linux.org/?a=blobdiff_plain;f=rc.d%2Frc.sysinit;fp=rc.d%2Frc.sysinit;h=b6bfb29827db80c7d8a9951c8de9964161673f3f;hb=4404a269deb7ef3202edfe76ce89af0fb81c5bf2;hp=b01b9d38f863d7cfaecda6ca73faad4a79430f1a;hpb=709875e895a085534cc77a44524c0a7ee2b9c7f8;p=rc-scripts.git

diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
index b01b9d3..b6bfb29 100755
--- a/rc.d/rc.sysinit
+++ b/rc.d/rc.sysinit
@@ -197,17 +197,6 @@ enable_swap() {
 	is_yes "$AUTOSWAP" && enable_autoswap
 }
 
-# Remove duplicate entries from mtab (for vserver guest use only)
-clean_vserver_mtab() {
-	> /etc/mtab.clean
-	while read device mountpoint line; do
-		grep -qs "$mountpoint" /etc/mtab.clean || \
-			echo "$device $mountpoint $line" >> /etc/mtab.clean
-	done < /etc/mtab
-	cat /etc/mtab.clean > /etc/mtab
-	rm -f /etc/mtab.clean
-}
-
 # Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
 load_kernel_modules() {
 	local modules_file=$1
@@ -365,7 +354,7 @@ else
 	RC_BOOTLOG=
 fi
 
-if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+if [[ "$container" != lxc* ]]; then
 	# we need /proc mounted before everything
 	is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
 
@@ -437,7 +426,7 @@ else
 	domainname ""
 fi
 
-if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+if [[ "$container" != lxc* ]]; then
 	# Set console loglevel
 	if [ -n "$CONSOLE_LOGLEVEL" ]; then
 		dmesg -n $CONSOLE_LOGLEVEL
@@ -629,7 +618,7 @@ if [ -n "$IN_INITLOG" ]; then
 	IN_INITLOG=""
 fi
 
-if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+if [[ "$container" != lxc* ]]; then
 	# Clear mtab
 	> /etc/mtab
 	[ -f /etc/cryptomtab ] && > /etc/cryptomtab
@@ -930,7 +919,6 @@ else
 		killall -IO blogd
 	fi
 
-	clean_vserver_mtab
 fi
 
 is_yes "$SELINUX" && [ -f /.autorelabel ] && relabel_selinux
@@ -989,37 +977,35 @@ is_yes "$SELINUX" && restorecon /tmp/.ICE-unix >/dev/null 2>&1
 
 test -d /var/run/netreport || mkdir -m 770 /var/run/netreport
 
-if ! is_yes "$VSERVER"; then
-	enable_swap
+enable_swap
 
-	# If a SCSI tape has been detected, load the st module unconditionally
-	# since many SCSI tapes don't deal well with st being loaded and unloaded
-	if [ -f /proc/scsi/scsi ] && grep -q 'Type:   Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
-		if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
-			if [ -n "$USEMODULES" ] ; then
-				# Try to load the module. If it fails, ignore it...
-				insmod -p st >/dev/null 2>&1 && modprobe -s st
-			fi
+# If a SCSI tape has been detected, load the st module unconditionally
+# since many SCSI tapes don't deal well with st being loaded and unloaded
+if [ -f /proc/scsi/scsi ] && grep -q 'Type:   Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
+	if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
+		if [ -n "$USEMODULES" ] ; then
+			# Try to load the module. If it fails, ignore it...
+			insmod -p st >/dev/null 2>&1 && modprobe -s st
 		fi
 	fi
+fi
 
-	# Now that we have all of our basic modules loaded and the kernel going,
-	# let's dump the syslog ring somewhere so we can find it later
-	mode=0600
-	if [ "$(cat /proc/sys/kernel/dmesg_restrict)" = 0 ]; then
-		mode=0644
-	fi
-	dmesg --raw > /var/log/dmesg
-	chmod $mode /var/log/dmesg
-	i=5
-	while [ $i -ge 0 ]; do
-		if [ -f /var/log/dmesg.$i ]; then
-			mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
-		fi
-		i=$(($i-1))
-	done
-	cp -pf /var/log/dmesg /var/log/dmesg.0
+# Now that we have all of our basic modules loaded and the kernel going,
+# let's dump the syslog ring somewhere so we can find it later
+mode=0600
+if [ "$(cat /proc/sys/kernel/dmesg_restrict)" = 0 ]; then
+	mode=0644
 fi
+dmesg --raw > /var/log/dmesg
+chmod $mode /var/log/dmesg
+i=5
+while [ $i -ge 0 ]; do
+	if [ -f /var/log/dmesg.$i ]; then
+		mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
+	fi
+	i=$(($i-1))
+done
+cp -pf /var/log/dmesg /var/log/dmesg.0
 
 if ! is_no "$RC_PROMPT"; then
 	while :; do
@@ -1031,8 +1017,8 @@ if ! is_no "$RC_PROMPT"; then
 fi
 } &
 
-# /proc extra check if the background process we just spawned is still running,
-# as in case of vserver bootup it finishes quite instantly.
+# /proc extra check if the background process we just spawned is still running
+# as it may finish quite instantly.
 if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
 	/sbin/getkey i && touch /var/run/confirm
 	touch /var/run/getkey_done