X-Git-Url: https://git.tld-linux.org/?a=blobdiff_plain;f=rc.d%2Frc.sysinit;h=c7375feae9db3825c00e10ba8164df82b905a06e;hb=94ec8ca43d5c1ce5d50a36ca4f3d63eb9b28a58c;hp=50ca08a247591fc1f33d68925bc3deb5551d8f53;hpb=bae490230fe06fe970c542247a499926c51d2b1f;p=rc-scripts.git

diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
index 50ca08a..c7375fe 100755
--- a/rc.d/rc.sysinit
+++ b/rc.d/rc.sysinit
@@ -297,63 +297,26 @@ check_root_fs() {
 	fi
 }
 
-# mdadm - manage MD devices aka Linux Software RAID
+# Init software RAID arrays
 init_mdadm() {
-	if [ ! -x /sbin/mdadm -o ! -f /etc/mdadm.conf ]; then
+	local output
+
+	if [ ! -x /sbin/mdadm ]; then
 		return
 	fi
 
 	modprobe -s md
-	local rc=0 golvm=0 have_md=0
 	if [ ! -f /proc/mdstat ]; then
 		return
 	fi
 
-	# assume we have md if at least one ARRAY line is present
-	if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf; then
-		have_md=1
-	fi
-	# configured to do auto scanning
-	if [ $have_md = 0 ] && grep -qE "^([[:blank:]]|)DEVICE[[:blank:]]partitions" /etc/mdadm.conf; then
-		have_md=1
-	fi
-
-	# none found
-	if [ $have_md = 0 ]; then
-		return
-	fi
-
 	show "Starting up RAID devices"; busy
-	/sbin/mdadm --assemble --scan --auto=yes
-	rc=$?
-	if [ "$rc" -eq 0 -o "$rc" -eq 2 ]; then
-		# rc is used later too, so set sane value
-		rc=0
-		deltext; ok
-		golvm=1
-	else
-		deltext; fail
-	fi
-
-	# A non-zero return means there were problems
-	if [ $rc -gt 0 ]; then
-		[ -e /proc/splash ] && echo "verbose" > /proc/splash
-		show "Starting up RAID devices"; fail
-
-		PS1="$(nls '(RAID Repair)# ')"; export PS1
-		repair_shell "$(nls '*** An error occurred during the RAID startup.')"
-	fi
+	output=$(/sbin/mdadm --assemble --scan 2>&1)
+	ok
 
-	# LVM on RAID (keep in sync with LVM init)
-	if [ "$golvm" -eq "1" ]; then
-		if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
-			run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelocking
-			run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmsysinit
-			[ "$lvmversion" = "2" ] && /sbin/vgmknodes
-		fi
+	if [ -n "$output" ]; then
+		echo "$output"
 	fi
-	show "Starting up RAID devices"; ok
-	return $rc
 }
 
 # Init LVM
@@ -386,8 +349,10 @@ init_lvm() {
 
 	run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
 	run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
+
 	if [ "$lvmversion" = "2" ]; then
-		/sbin/vgmknodes $lvmignorelocking
+		# silently refresh LV /dev nodes (just in case)
+		/sbin/vgmknodes $lvmignorelocking 1>/dev/null 2>&1
 		# display VG statistics
 		/sbin/vgdisplay -s $lvmignorelocking
 	fi
@@ -595,7 +560,7 @@ if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
 	_ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
 	_ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
 
-	if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
+	if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "tmpfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
 		check_root_fs
 	fi
 
@@ -820,7 +785,10 @@ if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
 		fi
 	fi
 
-	# Init LVM
+	if ! is_no "$MDADM"; then
+		init_mdadm
+	fi
+
 	if ! is_no "$LVM2"; then
 		init_lvm
 	fi
@@ -832,10 +800,6 @@ if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
 		[ $delay_cryptsetup = 0 ] && ok || fail
 	fi
 
-	if ! is_no "$MDADM"; then
-		init_mdadm
-	fi
-
 	_RUN_QUOTACHECK=0
 	# Check filesystems
 	if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then