From: Marcin Krol Date: Sat, 22 Nov 2014 13:49:30 +0000 (+0000) Subject: - updated to 5.6.3, partial PLD merge (mysqlnd stuff) X-Git-Url: https://git.tld-linux.org/?a=commitdiff_plain;h=614808e04f2c37a7ad7e880d8a25843692d47425;p=packages%2Fphp.git - updated to 5.6.3, partial PLD merge (mysqlnd stuff) --- diff --git a/fpm-conf-split.patch b/fpm-conf-split.patch index be1b1bc..5398f8b 100644 --- a/fpm-conf-split.patch +++ b/fpm-conf-split.patch @@ -1,5 +1,5 @@ ---- php-5.5.7/sapi/fpm/php-fpm.conf.in~ 2013-12-16 17:57:03.000000000 +0200 -+++ php-5.5.7/sapi/fpm/php-fpm.conf.in 2013-12-16 17:58:37.618025260 +0200 +--- php-5.6.3/sapi/fpm/php-fpm.conf.in~ 2014-11-17 20:03:42.000000000 +0200 ++++ php-5.6.3/sapi/fpm/php-fpm.conf.in 2014-11-17 20:04:50.287981731 +0200 @@ -6,14 +6,6 @@ ; prefix (@prefix@). This prefix can be dynamically changed by using the ; '-p' argument from the command line. @@ -10,15 +10,16 @@ -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p argument) -; - @prefix@ otherwise --;include=/etc/php/fpm.d/*.conf +-;include=etc/fpm.d/*.conf - ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; -@@ -116,404 +116,10 @@ +@@ -115,407 +115,3 @@ + ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) - +- -; Start a new pool named 'www'. -; the variable $pool can we used in any directive and will be replaced by the -; pool name ('www' here) @@ -47,11 +48,13 @@ -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on -; a specific port; +-; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on +-; a specific port; -; 'port' - to listen on a TCP socket to all addresses on a -; specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. --listen = /var/run/php/@processname@.sock +-listen = 127.0.0.1:9000 - -; Set listen(2) backlog. -; Default Value: 65535 (-1 on FreeBSD and OpenBSD) @@ -72,7 +75,7 @@ -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any --listen.allowed_clients = 127.0.0.1 +-;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) @@ -391,7 +394,7 @@ -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME --env[PATH] = $PATH +-;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp @@ -420,18 +423,9 @@ -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M -+; Include one or more files. If glob(3) exists, it is used to include a bunch of -+; files from a glob(3) pattern. This directive can be used everywhere in the -+; file. -+; Relative path can also be used. They will be prefixed by: -+; - the global prefix if it's been set (-p argument) -+; - @prefix@ otherwise -+include=/etc/php/fpm.d/*.conf --- /dev/null 2007-02-13 18:29:53.000000000 +0200 -+++ php-5.6.0beta1/sapi/fpm/php-fpm.conf-d.in 2014-04-21 21:58:46.191751631 +0300 ++++ php-5.6.3/sapi/fpm/php-fpm.conf-d.in 2014-11-17 20:05:20.559494174 +0200 @@ -0,0 +1,403 @@ -+; vim:ft=dosini -+; +; Start a new pool named 'www'. +; the variable $pool can we used in any directive and will be replaced by the +; pool name ('www' here) @@ -460,11 +454,13 @@ +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; a specific port; ++; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on ++; a specific port; +; 'port' - to listen on a TCP socket to all addresses on a +; specific port; +; '/path/to/unix/socket' - to listen on a unix socket. +; Note: This value is mandatory. -+listen = /var/run/php/@processname@.sock ++listen = 127.0.0.1:9000 + +; Set listen(2) backlog. +; Default Value: 65535 (-1 on FreeBSD and OpenBSD) @@ -485,7 +481,7 @@ +; must be separated by a comma. If this value is left blank, connections will be +; accepted from any ip address. +; Default Value: any -+listen.allowed_clients = 127.0.0.1 ++;listen.allowed_clients = 127.0.0.1 + +; Specify the nice(2) priority to apply to the pool processes (only if set) +; The value can vary from -19 (highest priority) to 20 (lower priority) @@ -804,7 +800,7 @@ +; the current environment. +; Default Value: clean env +;env[HOSTNAME] = $HOSTNAME -+env[PATH] = $PATH ++;env[PATH] = /usr/local/bin:/usr/bin:/bin +;env[TMP] = /tmp +;env[TMPDIR] = /tmp +;env[TEMP] = /tmp @@ -844,16 +840,16 @@ PHP_ADD_MAKEFILE_FRAGMENT([$abs_srcdir/sapi/fpm/Makefile.frag]) SAPI_FPM_PATH=sapi/fpm/php-fpm ---- php-5.5.7/sapi/fpm/Makefile.frag~ 2013-12-16 17:57:03.000000000 +0200 -+++ php-5.5.7/sapi/fpm/Makefile.frag 2013-12-16 18:01:19.511829907 +0200 +--- php-5.6.2/sapi/fpm/Makefile.frag~ 2014-10-15 15:59:32.000000000 +0300 ++++ php-5.6.2/sapi/fpm/Makefile.frag 2014-10-27 08:12:57.402883790 +0200 @@ -11,8 +11,9 @@ @$(INSTALL) -m 0755 $(SAPI_FPM_PATH) $(INSTALL_ROOT)$(sbindir)/$(program_prefix)php-fpm$(program_suffix)$(EXEEXT) @echo "Installing PHP FPM config: $(INSTALL_ROOT)$(sysconfdir)/" && \ - $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir) || : + $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir)/fpm.d || : - @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf || : -+ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf || : + @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf.default || : ++ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf.default || : @echo "Installing PHP FPM man page: $(INSTALL_ROOT)$(mandir)/man8/" @$(mkinstalldirs) $(INSTALL_ROOT)$(mandir)/man8 diff --git a/mysqlnd-ssl.patch b/mysqlnd-ssl.patch new file mode 100644 index 0000000..3157280 --- /dev/null +++ b/mysqlnd-ssl.patch @@ -0,0 +1,24 @@ +link mysqlnd.so with openssl if enabled + +--- php-5.6.1/ext/mysqlnd/config9.m4~ 2014-10-01 12:17:38.000000000 +0300 ++++ php-5.6.1/ext/mysqlnd/config9.m4 2014-10-07 20:19:44.653070295 +0300 +@@ -34,10 +34,17 @@ + test -z "$PHP_OPENSSL" && PHP_OPENSSL=no + + if test "$PHP_OPENSSL" != "no" || test "$PHP_OPENSSL_DIR" != "no"; then +- AC_CHECK_LIB(ssl, DSA_get_default_method, AC_DEFINE(HAVE_DSA_DEFAULT_METHOD, 1, [OpenSSL 0.9.7 or later])) +- AC_CHECK_LIB(crypto, X509_free, AC_DEFINE(HAVE_DSA_DEFAULT_METHOD, 1, [OpenSSL 0.9.7 or later])) ++ AC_CHECK_LIB(ssl, DSA_get_default_method, [ ++ AC_DEFINE(HAVE_DSA_DEFAULT_METHOD, 1, [OpenSSL 0.9.7 or later]) ++ PHP_ADD_EXTENSION_DEP(mysqlnd, ssl) ++ ]) ++ AC_CHECK_LIB(crypto, X509_free, [ ++ AC_DEFINE(HAVE_DSA_DEFAULT_METHOD, 1, [OpenSSL 0.9.7 or later]) ++ PHP_ADD_EXTENSION_DEP(mysqlnd, crypto) ++ ]) + + PHP_SETUP_OPENSSL(MYSQLND_SHARED_LIBADD, [AC_DEFINE(MYSQLND_HAVE_SSL,1,[Enable mysqlnd code that uses OpenSSL directly])]) ++ + fi + + mysqlnd_sources="$mysqlnd_base_sources $mysqlnd_ps_sources" diff --git a/php-fpm-config.patch b/php-fpm-config.patch index 353c012..cb2b91d 100644 --- a/php-fpm-config.patch +++ b/php-fpm-config.patch @@ -1,15 +1,6 @@ ---- php-5.4.7/sapi/fpm/php-fpm.conf.in 2012-10-05 22:16:44.895998479 +0300 -+++ php-5.3.17/sapi/fpm/php-fpm.conf.in 2012-10-12 12:35:47.601602945 +0300 -@@ -12,7 +12,7 @@ - ; Relative path can also be used. They will be prefixed by: - ; - the global prefix if it's been set (-p arguement) - ; - @prefix@ otherwise --;include=etc/fpm.d/*.conf -+;include=/etc/php/fpm.d/*.conf - - ;;;;;;;;;;;;;;;;;; - ; Global Options ; -@@ -22,14 +22,14 @@ +--- php-5.6.2/sapi/fpm/php-fpm.conf.in 2014-10-27 08:20:34.963718145 +0200 ++++ php-5.6.2.old/sapi/fpm/php-fpm.conf.in 2014-10-27 08:07:47.762117299 +0200 +@@ -14,14 +14,14 @@ ; Pid file ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@ ; Default Value: none @@ -26,25 +17,52 @@ ; syslog_facility is used to specify what type of program is logging the ; message. This lets syslogd specify that messages from different facilities -@@ -93,7 +93,7 @@ +@@ -115,3 +115,11 @@ + ; ports and different management options. The name of the pool will be + ; used in logs and stats. There is no limitation on the number of pools which + ; FPM can handle. Your system will tell you anyway :) ++ ++; Include one or more files. If glob(3) exists, it is used to include a bunch of ++; files from a glob(3) pattern. This directive can be used everywhere in the ++; file. ++; Relative path can also be used. They will be prefixed by: ++; - the global prefix if it's been set (-p argument) ++; - @prefix@ otherwise ++include=/etc/php/fpm.d/*.conf +--- php-5.6.2.old/sapi/fpm/php-fpm.conf-d.in 2014-10-27 08:07:47.762117299 +0200 ++++ php-5.6.2/sapi/fpm/php-fpm.conf-d.in 2014-10-27 08:23:41.232196777 +0200 +@@ -32,7 +32,7 @@ ; specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. -listen = 127.0.0.1:9000 +listen = /var/run/php/@processname@.sock - ; Set listen(2) backlog. A value of '-1' means unlimited. - ; Default Value: 128 (-1 on FreeBSD and OpenBSD) -@@ -105,7 +105,7 @@ + ; Set listen(2) backlog. + ; Default Value: 65535 (-1 on FreeBSD and OpenBSD) +@@ -41,9 +41,9 @@ + ; BSD-derived systems allow connections regardless of permissions. + ; Default Values: user and group are set as the running user + ; mode is set to 0660 +-;listen.owner = @php_fpm_user@ +-;listen.group = @php_fpm_group@ +-;listen.mode = 0660 ++listen.owner = root ++listen.group = @php_fpm_group@ ++listen.mode = 0660 + + ; List of ipv4 addresses of FastCGI clients which are allowed to connect. + ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original +@@ -53,7 +53,7 @@ ; must be separated by a comma. If this value is left blank, connections will be ; accepted from any ip address. ; Default Value: any -;listen.allowed_clients = 127.0.0.1 +listen.allowed_clients = 127.0.0.1 - ; Set permissions for unix socket, if one is used. In Linux, read/write - ; permissions must be set in order to allow connections from a web server. Many -@@ -277,7 +277,7 @@ + ; Specify the nice(2) priority to apply to the pool processes (only if set) + ; The value can vary from -19 (highest priority) to 20 (lower priority) +@@ -372,7 +372,7 @@ ; the current environment. ; Default Value: clean env ;env[HOSTNAME] = $HOSTNAME @@ -64,14 +82,16 @@ ths = document.getElementsByTagName("th"); for (var i=0; i 4.1) %bcond_without odbc # without ODBC extension module %bcond_without opcache # without Enable Zend OPcache extension support @@ -146,13 +144,13 @@ Summary(pt_BR.UTF-8): A linguagem de script PHP Summary(ru.UTF-8): PHP Версии 5 - язык препроцессирования HTML-файлов, выполняемый на сервере Summary(uk.UTF-8): PHP Версії 5 - мова препроцесування HTML-файлів, виконувана на сервері Name: %{orgname}%{php_suffix} -Version: 5.6.2 +Version: 5.6.3 Release: %{rel}%{?with_type_hints:.th} Epoch: 4 License: PHP Group: Libraries Source0: http://www.php.net/distributions/%{orgname}-%{version}.tar.xz -# Source0-md5: c976f54d429a0e5214659b0098e44e37 +# Source0-md5: 7635f344145a4edd7dff6ecec795aaea Source2: %{orgname}-mod_%{orgname}.conf Source3: %{orgname}-cgi-fcgi.ini Source4: %{orgname}-apache.ini @@ -218,6 +216,7 @@ Patch65: system-libzip.patch Patch66: php-db.patch Patch67: mysql-lib-ver-mismatch.patch Patch69: fpm-conf-split.patch +Patch70: mysqlnd-ssl.patch URL: http://www.php.net/ %{?with_interbase:%{!?with_interbase_inst:BuildRequires: Firebird-devel >= 1.0.2.908-2}} %{?with_pspell:BuildRequires: aspell-devel >= 2:0.50.0} @@ -546,7 +545,7 @@ Provides: php(ereg) Provides: php(libxml) Provides: php(reflection) Provides: php(standard) -%{!?with_mysqlnd:Obsoletes: php-mysqlnd} +%{!?with_mysqlnd:Obsoletes: %{name}-mysqlnd} %{?with_pcre:%requires_ge_to pcre pcre-devel} Obsoletes: php-common < 4:5.3.28-7 Obsoletes: php-pecl-domxml @@ -2007,6 +2006,7 @@ cp -p php.ini-production php.ini %patch38 -p1 %patch39 -p1 %if %{with fpm} +%patch69 -p1 %patch41 -p1 %patch42 -p1 %endif @@ -2030,7 +2030,7 @@ cp -p php.ini-production php.ini %{?with_system_libzip:%patch65 -p1} %patch66 -p1 %patch67 -p1 -%patch69 -p1 +%patch70 -p1 sed -i -e '/PHP_ADD_LIBRARY_WITH_PATH/s#xmlrpc,#xmlrpc-epi,#' ext/xmlrpc/config.m4 @@ -2408,7 +2408,9 @@ sapis=$(%{__sed} -rne 's/^PHP_INSTALLED_SAPIS = (.+)/\1/p' Makefile.* | tr ' ' ' cp -af php_config.h.cli main/php_config.h cp -af Makefile.cli Makefile %{__make} libphp_common.la -%{__make} build-modules +# hack: MYSQLND_SHARED_LIBADD not initialized +%{__make} build-modules \ + MYSQLND_SHARED_LIBADD="-lssl -lcrypto" %if %{with apache1} %{__make} libtool-sapi LIBTOOL_SAPI=sapi/apache/libphp5.la -f Makefile.apxs1