-diff -ru libvirt-0.8.8/daemon/libvirtd.conf libvirt-0.8.8-sasl/daemon/libvirtd.conf
---- libvirt-0.8.8/daemon/libvirtd.conf 2010-12-20 14:35:22.000000000 +0100
-+++ libvirt-0.8.8-sasl/daemon/libvirtd.conf 2011-04-28 11:45:47.727741165 +0200
-@@ -111,7 +111,7 @@
+diff -urp libvirt-4.5.0.orig/docs/auth.html libvirt-4.5.0/docs/auth.html
+--- libvirt-4.5.0.orig/docs/auth.html 2018-07-09 16:24:49.467875585 +0000
++++ libvirt-4.5.0/docs/auth.html 2018-07-09 16:25:07.306874521 +0000
+@@ -338,7 +338,7 @@ to turn on SASL auth in these listeners.
+ <p>
+ Since the libvirt SASL config file defaults to using GSSAPI (Kerberos), a
+ config change is rquired to enable plain password auth. This is done by
+-editting <code>/etc/sasl2/libvirt.conf</code> to set the <code>mech_list</code>
++editting <code>/etc/sasl/libvirt.conf</code> to set the <code>mech_list</code>
+ parameter to <code>scram-sha-1</code>.
+ </p>
+ <p>
+diff -urp libvirt-4.5.0.orig/docs/auth.html.in libvirt-4.5.0/docs/auth.html.in
+--- libvirt-4.5.0.orig/docs/auth.html.in 2018-07-09 16:24:49.471875584 +0000
++++ libvirt-4.5.0/docs/auth.html.in 2018-07-09 16:25:07.307874521 +0000
+@@ -267,7 +267,7 @@ to turn on SASL auth in these listeners.
+ <p>
+ Since the libvirt SASL config file defaults to using GSSAPI (Kerberos), a
+ config change is rquired to enable plain password auth. This is done by
+-editting <code>/etc/sasl2/libvirt.conf</code> to set the <code>mech_list</code>
++editting <code>/etc/sasl/libvirt.conf</code> to set the <code>mech_list</code>
+ parameter to <code>scram-sha-1</code>.
+ </p>
+ <p>
+diff -urp libvirt-4.5.0.orig/src/Makefile.in libvirt-4.5.0/src/Makefile.in
+--- libvirt-4.5.0.orig/src/Makefile.in 2018-07-09 16:24:49.542875580 +0000
++++ libvirt-4.5.0/src/Makefile.in 2018-07-09 16:25:07.311874521 +0000
+@@ -13166,13 +13166,13 @@ lxc/lxc_controller_dispatch.h: $(srcdir)
+ # This is needed for clients too, so can't wrap in
+ # the WITH_LIBVIRTD conditional
+ @WITH_SASL_TRUE@install-sasl:
+-@WITH_SASL_TRUE@ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
++@WITH_SASL_TRUE@ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl/
+ @WITH_SASL_TRUE@ $(INSTALL_DATA) $(srcdir)/remote/libvirtd.sasl \
+-@WITH_SASL_TRUE@ $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
++@WITH_SASL_TRUE@ $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
+
+ @WITH_SASL_TRUE@uninstall-sasl:
+-@WITH_SASL_TRUE@ rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
+-@WITH_SASL_TRUE@ rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
++@WITH_SASL_TRUE@ rm -f $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
++@WITH_SASL_TRUE@ rmdir $(DESTDIR)$(sysconfdir)/sasl/ || :
+ @WITH_SASL_FALSE@install-sasl:
+ @WITH_SASL_FALSE@uninstall-sasl:
+
+diff -urp libvirt-4.5.0.orig/src/qemu/qemu.conf libvirt-4.5.0/src/qemu/qemu.conf
+--- libvirt-4.5.0.orig/src/qemu/qemu.conf 2018-07-09 16:24:49.520875581 +0000
++++ libvirt-4.5.0/src/qemu/qemu.conf 2018-07-09 16:25:07.311874521 +0000
+@@ -129,18 +129,18 @@
+ # Examples include vinagre, virt-viewer and virt-manager
+ # itself. UltraVNC, RealVNC, TightVNC do not support this
+ #
+-# It is necessary to configure /etc/sasl2/qemu.conf to choose
++# It is necessary to configure /etc/sasl/qemu.conf to choose
+ # the desired SASL plugin (eg, GSSPI for Kerberos)
+ #
+ #vnc_sasl = 1
+
+
+-# The default SASL configuration file is located in /etc/sasl2/
++# The default SASL configuration file is located in /etc/sasl/
+ # When running libvirtd unprivileged, it may be desirable to
+ # override the configs in this location. Set this parameter to
+ # point to the directory, and create a qemu.conf in that location
+ #
+-#vnc_sasl_dir = "/some/directory/sasl2"
++#vnc_sasl_dir = "/some/directory/sasl"
+
+
+ # QEMU implements an extension for providing audio over a VNC connection,
+@@ -205,17 +205,17 @@
+ # Enable use of SASL encryption on the SPICE server. This requires
+ # a SPICE client which supports the SASL protocol extension.
+ #
+-# It is necessary to configure /etc/sasl2/qemu.conf to choose
++# It is necessary to configure /etc/sasl/qemu.conf to choose
+ # the desired SASL plugin (eg, GSSPI for Kerberos)
+ #
+ #spice_sasl = 1
+
+-# The default SASL configuration file is located in /etc/sasl2/
++# The default SASL configuration file is located in /etc/sasl/
+ # When running libvirtd unprivileged, it may be desirable to
+ # override the configs in this location. Set this parameter to
+ # point to the directory, and create a qemu.conf in that location
+ #
+-#spice_sasl_dir = "/some/directory/sasl2"
++#spice_sasl_dir = "/some/directory/sasl"
+
+ # Enable use of TLS encryption on the chardev TCP transports.
+ #
+diff -urp libvirt-4.5.0.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-4.5.0/src/qemu/test_libvirtd_qemu.aug.in
+--- libvirt-4.5.0.orig/src/qemu/test_libvirtd_qemu.aug.in 2018-07-09 16:24:49.520875581 +0000
++++ libvirt-4.5.0/src/qemu/test_libvirtd_qemu.aug.in 2018-07-09 16:25:07.312874521 +0000
+@@ -12,7 +12,7 @@ module Test_libvirtd_qemu =
+ { "vnc_tls_x509_verify" = "1" }
+ { "vnc_password" = "XYZ12345" }
+ { "vnc_sasl" = "1" }
+-{ "vnc_sasl_dir" = "/some/directory/sasl2" }
++{ "vnc_sasl_dir" = "/some/directory/sasl" }
+ { "vnc_allow_host_audio" = "0" }
+ { "spice_listen" = "0.0.0.0" }
+ { "spice_tls" = "1" }
+@@ -20,7 +20,7 @@ module Test_libvirtd_qemu =
+ { "spice_auto_unix_socket" = "1" }
+ { "spice_password" = "XYZ12345" }
+ { "spice_sasl" = "1" }
+-{ "spice_sasl_dir" = "/some/directory/sasl2" }
++{ "spice_sasl_dir" = "/some/directory/sasl" }
+ { "chardev_tls" = "1" }
+ { "chardev_tls_x509_cert_dir" = "/etc/pki/libvirt-chardev" }
+ { "chardev_tls_x509_verify" = "1" }
+diff -urp libvirt-4.5.0.orig/src/remote/libvirtd.conf libvirt-4.5.0/src/remote/libvirtd.conf
+--- libvirt-4.5.0.orig/src/remote/libvirtd.conf 2018-07-09 16:24:49.523875581 +0000
++++ libvirt-4.5.0/src/remote/libvirtd.conf 2018-07-09 16:25:07.312874521 +0000
+@@ -123,7 +123,7 @@
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
-# controlled from /etc/sasl2/libvirt.conf. For the TCP
+# controlled from /etc/sasl/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
+ # For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -142,7 +142,7 @@
+@@ -154,7 +154,7 @@
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
---- libvirt-1.1.3/daemon/Makefile.am.orig 2013-10-22 16:46:45.409294047 +0200
-+++ libvirt-1.1.3/daemon/Makefile.am 2013-10-22 20:09:12.185450964 +0200
-@@ -453,13 +453,13 @@
+diff -urp libvirt-4.5.0.orig/src/remote/Makefile.inc.am libvirt-4.5.0/src/remote/Makefile.inc.am
+--- libvirt-4.5.0.orig/src/remote/Makefile.inc.am 2018-07-09 16:24:49.520875581 +0000
++++ libvirt-4.5.0/src/remote/Makefile.inc.am 2018-07-09 16:25:07.312874521 +0000
+@@ -248,13 +248,13 @@ endif ! WITH_LIBVIRTD
# the WITH_LIBVIRTD conditional
if WITH_SASL
- install-data-sasl:
+ install-sasl:
- $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
+ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl/
- $(INSTALL_DATA) $(srcdir)/libvirtd.sasl \
+ $(INSTALL_DATA) $(srcdir)/remote/libvirtd.sasl \
- $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
+ $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
- uninstall-data-sasl:
+ uninstall-sasl:
- rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
- rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
+ rm -f $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
+ rmdir $(DESTDIR)$(sysconfdir)/sasl/ || :
else ! WITH_SASL
- install-data-sasl:
- uninstall-data-sasl:
-diff -ru libvirt-0.8.8/daemon/test_libvirtd.aug libvirt-0.8.8-sasl/daemon/test_libvirtd.aug
-diff -ru libvirt-0.8.8/docs/auth.html libvirt-0.8.8-sasl/docs/auth.html
---- libvirt-0.8.8/docs/auth.html 2011-02-17 05:13:12.000000000 +0100
-+++ libvirt-0.8.8-sasl/docs/auth.html 2011-04-28 11:45:43.429741167 +0200
-@@ -273,7 +273,7 @@
- The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
- The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
- username+password style authentication. To enable Kerberos single-sign-on instead,
--the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
-+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
- The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>. If SASL is enabled on the UNIX
- and/or TLS sockets, Kerberos will also be used for them. Like DIGEST-MD5, the Kerberos
-diff -ru libvirt-0.8.8/docs/auth.html.in libvirt-0.8.8-sasl/docs/auth.html.in
---- libvirt-0.8.8/docs/auth.html.in 2010-12-20 14:35:22.000000000 +0100
-+++ libvirt-0.8.8-sasl/docs/auth.html.in 2011-04-28 11:45:43.586741167 +0200
-@@ -115,7 +115,7 @@
- The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
- The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
- username+password style authentication. To enable Kerberos single-sign-on instead,
--the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
-+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
- The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>. If SASL is enabled on the UNIX
- and/or TLS sockets, Kerberos will also be used for them. Like DIGEST-MD5, the Kerberos
-diff -ru libvirt-0.8.8/libvirt.spec libvirt-0.8.8-sasl/libvirt.spec
---- libvirt-0.8.8/libvirt.spec 2011-02-17 05:13:09.000000000 +0100
-+++ libvirt-0.8.8-sasl/libvirt.spec 2011-04-28 11:45:43.675741167 +0200
-@@ -933,7 +933,7 @@
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
-
- %if %{with_sasl}
--%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
-+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
-
- %files devel
-diff -ru libvirt-0.8.8/libvirt.spec.in libvirt-0.8.8-sasl/libvirt.spec.in
---- libvirt-0.8.8/libvirt.spec.in 2011-02-17 05:10:58.000000000 +0100
-+++ libvirt-0.8.8-sasl/libvirt.spec.in 2011-04-28 11:45:43.672741167 +0200
-@@ -933,7 +933,7 @@
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
-
- %if %{with_sasl}
--%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
-+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
-
- %files devel
---- libvirt-0.9.13/src/qemu/qemu.conf.orig 2012-05-31 16:23:22.000000000 +0200
-+++ libvirt-0.9.13/src/qemu/qemu.conf 2012-07-08 11:37:16.366378718 +0200
-@@ -74,18 +74,18 @@
- # Examples include vinagre, virt-viewer and virt-manager
- # itself. UltraVNC, RealVNC, TightVNC do not support this
- #
--# It is necessary to configure /etc/sasl2/qemu.conf to choose
-+# It is necessary to configure /etc/sasl/qemu.conf to choose
- # the desired SASL plugin (eg, GSSPI for Kerberos)
- #
- #vnc_sasl = 1
-
-
--# The default SASL configuration file is located in /etc/sasl2/
-+# The default SASL configuration file is located in /etc/sasl/
- # When running libvirtd unprivileged, it may be desirable to
- # override the configs in this location. Set this parameter to
- # point to the directory, and create a qemu.conf in that location
- #
--#vnc_sasl_dir = "/some/directory/sasl2"
-+#vnc_sasl_dir = "/some/directory/sasl"
-
+ install-sasl:
+ uninstall-sasl:
+diff -urp libvirt-4.5.0.orig/tests/qemuargv2xmldata/graphics-vnc-sasl.args libvirt-4.5.0/tests/qemuargv2xmldata/graphics-vnc-sasl.args
+--- libvirt-4.5.0.orig/tests/qemuargv2xmldata/graphics-vnc-sasl.args 2018-07-09 16:24:50.006875552 +0000
++++ libvirt-4.5.0/tests/qemuargv2xmldata/graphics-vnc-sasl.args 2018-07-09 16:25:07.312874521 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu-system-i686 \
+ -name QEMUGuest1 \
+diff -urp libvirt-4.5.0.orig/tests/qemuargv2xmldata/graphics-vnc-tls.args libvirt-4.5.0/tests/qemuargv2xmldata/graphics-vnc-tls.args
+--- libvirt-4.5.0.orig/tests/qemuargv2xmldata/graphics-vnc-tls.args 2018-07-09 16:24:50.006875552 +0000
++++ libvirt-4.5.0/tests/qemuargv2xmldata/graphics-vnc-tls.args 2018-07-09 16:25:07.312874521 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu-system-i686 \
+ -name QEMUGuest1 \
+diff -urp libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-spice-sasl.args libvirt-4.5.0/tests/qemuxml2argvdata/graphics-spice-sasl.args
+--- libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-spice-sasl.args 2018-07-09 16:24:49.567875579 +0000
++++ libvirt-4.5.0/tests/qemuxml2argvdata/graphics-spice-sasl.args 2018-07-09 16:25:07.312874521 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=spice \
+ /usr/bin/qemu-system-i686 \
+ -name QEMUGuest1 \
+diff -urp libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-vnc-sasl.args libvirt-4.5.0/tests/qemuxml2argvdata/graphics-vnc-sasl.args
+--- libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-vnc-sasl.args 2018-07-09 16:24:49.567875579 +0000
++++ libvirt-4.5.0/tests/qemuxml2argvdata/graphics-vnc-sasl.args 2018-07-09 16:25:07.312874521 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu-system-i686 \
+ -name QEMUGuest1 \
+diff -urp libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-vnc-tls.args libvirt-4.5.0/tests/qemuxml2argvdata/graphics-vnc-tls.args
+--- libvirt-4.5.0.orig/tests/qemuxml2argvdata/graphics-vnc-tls.args 2018-07-09 16:24:49.567875579 +0000
++++ libvirt-4.5.0/tests/qemuxml2argvdata/graphics-vnc-tls.args 2018-07-09 16:25:07.313874521 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu-system-i686 \
+ -name QEMUGuest1 \
+diff -urp libvirt-4.5.0.orig/tests/qemuxml2argvtest.c libvirt-4.5.0/tests/qemuxml2argvtest.c
+--- libvirt-4.5.0.orig/tests/qemuxml2argvtest.c 2018-07-09 16:24:49.831875563 +0000
++++ libvirt-4.5.0/tests/qemuxml2argvtest.c 2018-07-09 16:25:07.313874521 +0000
+@@ -1190,7 +1190,7 @@ mymain(void)
- # QEMU implements an extension for providing audio over a VNC connection,
-diff -ru libvirt-0.8.8/src/qemu/test_libvirtd_qemu.aug libvirt-0.8.8-sasl/src/qemu/test_libvirtd_qemu.aug
-diff -ru libvirt-0.8.8/tests/confdata/libvirtd.conf libvirt-0.8.8-sasl/tests/confdata/libvirtd.conf
---- libvirt-0.8.8/tests/confdata/libvirtd.conf 2010-05-27 14:03:22.000000000 +0200
-+++ libvirt-0.8.8-sasl/tests/confdata/libvirtd.conf 2011-04-28 11:45:46.878741165 +0200
-@@ -102,7 +102,7 @@
+ driver.config->vncSASL = 1;
+ VIR_FREE(driver.config->vncSASLdir);
+- ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl2"));
++ ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl"));
+ DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
+ driver.config->vncTLS = 1;
+ driver.config->vncTLSx509verify = 1;
+@@ -1210,7 +1210,7 @@ mymain(void)
+ DO_TEST("graphics-spice-no-args",
+ QEMU_CAPS_SPICE, QEMU_CAPS_DEVICE_CIRRUS_VGA);
+ driver.config->spiceSASL = 1;
+- ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl2"));
++ ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl"));
+ DO_TEST("graphics-spice-sasl",
+ QEMU_CAPS_SPICE,
+ QEMU_CAPS_DEVICE_QXL);
+diff -urp libvirt-4.5.0.orig/tests/virconfdata/libvirtd.conf libvirt-4.5.0/tests/virconfdata/libvirtd.conf
+--- libvirt-4.5.0.orig/tests/virconfdata/libvirtd.conf 2018-07-09 16:24:49.818875564 +0000
++++ libvirt-4.5.0/tests/virconfdata/libvirtd.conf 2018-07-09 16:25:07.313874521 +0000
+@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -133,7 +133,7 @@
+@@ -139,7 +139,7 @@ auth_unix_rw = "none"
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
-diff -ru libvirt-0.8.8/tests/confdata/libvirtd.out libvirt-0.8.8-sasl/tests/confdata/libvirtd.out
---- libvirt-0.8.8/tests/confdata/libvirtd.out 2010-05-27 14:03:22.000000000 +0200
-+++ libvirt-0.8.8-sasl/tests/confdata/libvirtd.out 2011-04-28 11:45:46.875741165 +0200
-@@ -82,7 +82,7 @@
+diff -urp libvirt-4.5.0.orig/tests/virconfdata/libvirtd.out libvirt-4.5.0/tests/virconfdata/libvirtd.out
+--- libvirt-4.5.0.orig/tests/virconfdata/libvirtd.out 2018-07-09 16:24:49.818875564 +0000
++++ libvirt-4.5.0/tests/virconfdata/libvirtd.out 2018-07-09 16:25:07.313874521 +0000
+@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -111,7 +111,7 @@
+@@ -116,7 +116,7 @@ auth_unix_rw = "none"
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
#
---- libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args.orig 2014-07-03 20:04:05.132591762 +0200
-+++ libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2014-07-03 20:42:03.205829499 +0200
-@@ -1,5 +1,5 @@
- LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \
--SASL_CONF_PATH=/root/.sasl2 QEMU_AUDIO_DRV=none \
-+SASL_CONF_PATH=/root/.sasl QEMU_AUDIO_DRV=none \
- /usr/bin/qemu -S -M pc -m 214 \
- -smp 1 -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \
- /dev/HostVG/QEMUGuest1 -net none -serial none -parallel none -vnc \
---- libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args.orig 2014-07-03 20:04:05.132591762 +0200
-+++ libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2014-07-03 20:42:29.659161721 +0200
-@@ -1,5 +1,5 @@
- LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \
--SASL_CONF_PATH=/root/.sasl2 QEMU_AUDIO_DRV=none \
-+SASL_CONF_PATH=/root/.sasl QEMU_AUDIO_DRV=none \
- /usr/bin/qemu -S -M pc -m 214 \
- -smp 1 -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \
- /dev/HostVG/QEMUGuest1 -net none -serial none -parallel none -vnc \
---- libvirt-1.0.6/tests/qemuxml2argvtest.c.orig 2013-06-16 15:44:25.855183409 +0200
-+++ libvirt-1.0.6/tests/qemuxml2argvtest.c 2013-06-16 15:45:12.908515760 +0200
-@@ -614,7 +614,7 @@
-
- driver.config->vncSASL = 1;
- VIR_FREE(driver.config->vncSASLdir);
-- ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl2"));
-+ ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl"));
- DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC, QEMU_CAPS_VGA);
- driver.config->vncTLS = 1;
- driver.config->vncTLSx509verify = 1;
TLD / packages / libvirt.git / blobdiff