-diff -urp libvirt-1.3.3.orig/daemon/libvirtd.conf libvirt-1.3.3/daemon/libvirtd.conf
---- libvirt-1.3.3.orig/daemon/libvirtd.conf 2016-04-14 10:15:59.438170000 +0000
-+++ libvirt-1.3.3/daemon/libvirtd.conf 2016-04-14 10:16:21.849170000 +0000
-@@ -128,7 +128,7 @@
+diff -urp libvirt-2.1.0.orig/daemon/libvirtd.conf libvirt-2.1.0/daemon/libvirtd.conf
+--- libvirt-2.1.0.orig/daemon/libvirtd.conf 2016-08-20 10:07:32.043554000 +0000
++++ libvirt-2.1.0/daemon/libvirtd.conf 2016-08-20 10:07:47.074554000 +0000
+@@ -123,7 +123,7 @@
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -159,7 +159,7 @@
+@@ -154,7 +154,7 @@
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
-diff -urp libvirt-1.3.3.orig/daemon/Makefile.am libvirt-1.3.3/daemon/Makefile.am
---- libvirt-1.3.3.orig/daemon/Makefile.am 2016-04-14 10:15:59.438170000 +0000
-+++ libvirt-1.3.3/daemon/Makefile.am 2016-04-14 10:16:21.849170000 +0000
-@@ -521,13 +521,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
+diff -urp libvirt-2.1.0.orig/daemon/Makefile.am libvirt-2.1.0/daemon/Makefile.am
+--- libvirt-2.1.0.orig/daemon/Makefile.am 2016-08-20 10:07:32.040554000 +0000
++++ libvirt-2.1.0/daemon/Makefile.am 2016-08-20 10:07:47.074554000 +0000
+@@ -528,13 +528,13 @@ POD2MAN = pod2man -c "Virtualization Sup
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
else ! WITH_SASL
install-data-sasl:
uninstall-data-sasl:
-diff -urp libvirt-1.3.3.orig/daemon/Makefile.in libvirt-1.3.3/daemon/Makefile.in
---- libvirt-1.3.3.orig/daemon/Makefile.in 2016-04-14 10:15:59.436170000 +0000
-+++ libvirt-1.3.3/daemon/Makefile.in 2016-04-14 10:16:21.852170000 +0000
-@@ -2832,13 +2832,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
+diff -urp libvirt-2.1.0.orig/daemon/Makefile.in libvirt-2.1.0/daemon/Makefile.in
+--- libvirt-2.1.0.orig/daemon/Makefile.in 2016-08-20 10:07:32.040554000 +0000
++++ libvirt-2.1.0/daemon/Makefile.in 2016-08-20 10:07:47.076554000 +0000
+@@ -2842,13 +2842,13 @@ admin_dispatch.h: $(top_srcdir)/src/rpc/
# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
@WITH_SASL_TRUE@install-data-sasl:
@WITH_SASL_FALSE@install-data-sasl:
@WITH_SASL_FALSE@uninstall-data-sasl:
-diff -urp libvirt-1.3.3.orig/docs/auth.html libvirt-1.3.3/docs/auth.html
---- libvirt-1.3.3.orig/docs/auth.html 2016-04-14 10:15:59.421170000 +0000
-+++ libvirt-1.3.3/docs/auth.html 2016-04-14 10:16:21.852170000 +0000
-@@ -404,7 +404,7 @@ again:
+diff -urp libvirt-2.1.0.orig/docs/auth.html libvirt-2.1.0/docs/auth.html
+--- libvirt-2.1.0.orig/docs/auth.html 2016-08-20 10:07:32.082554000 +0000
++++ libvirt-2.1.0/docs/auth.html 2016-08-20 10:07:47.076554000 +0000
+@@ -415,7 +415,7 @@ again:
The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
username+password style authentication. To enable Kerberos single-sign-on instead,
The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
instead of the default <code>digest-md5</code>, and keytab should be set to
<code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
-diff -urp libvirt-1.3.3.orig/docs/auth.html.in libvirt-1.3.3/docs/auth.html.in
---- libvirt-1.3.3.orig/docs/auth.html.in 2016-04-14 10:15:59.414170000 +0000
-+++ libvirt-1.3.3/docs/auth.html.in 2016-04-14 10:16:21.853170000 +0000
-@@ -234,7 +234,7 @@ again:
+diff -urp libvirt-2.1.0.orig/docs/auth.html.in libvirt-2.1.0/docs/auth.html.in
+--- libvirt-2.1.0.orig/docs/auth.html.in 2016-08-20 10:07:32.100554000 +0000
++++ libvirt-2.1.0/docs/auth.html.in 2016-08-20 10:07:47.077554000 +0000
+@@ -246,7 +246,7 @@ again:
The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
username+password style authentication. To enable Kerberos single-sign-on instead,
The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
instead of the default <code>digest-md5</code>, and keytab should be set to
<code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
-diff -urp libvirt-1.3.3.orig/libvirt.spec libvirt-1.3.3/libvirt.spec
---- libvirt-1.3.3.orig/libvirt.spec 2016-04-14 10:15:59.436170000 +0000
-+++ libvirt-1.3.3/libvirt.spec 2016-04-14 10:16:21.860170000 +0000
-@@ -2332,7 +2332,7 @@ exit 0
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
+diff -urp libvirt-2.1.0.orig/libvirt.spec libvirt-2.1.0/libvirt.spec
+--- libvirt-2.1.0.orig/libvirt.spec 2016-08-20 10:07:31.917554000 +0000
++++ libvirt-2.1.0/libvirt.spec 2016-08-20 10:08:58.351554000 +0000
+@@ -1827,7 +1827,7 @@ exit 0
+ %{_datadir}/libvirt/cpu_map.xml
+ %{_datadir}/libvirt/libvirtLogo.png
- %if %{with_sasl}
-%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
- %if %{with_wireshark}
-diff -urp libvirt-1.3.3.orig/libvirt.spec.in libvirt-1.3.3/libvirt.spec.in
---- libvirt-1.3.3.orig/libvirt.spec.in 2016-04-14 10:16:00.591170000 +0000
-+++ libvirt-1.3.3/libvirt.spec.in 2016-04-14 10:16:21.872170000 +0000
-@@ -2332,7 +2332,7 @@ exit 0
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
+ %files admin
+ %{_mandir}/man1/virt-admin.1*
+diff -urp libvirt-2.1.0.orig/libvirt.spec.in libvirt-2.1.0/libvirt.spec.in
+--- libvirt-2.1.0.orig/libvirt.spec.in 2016-08-20 10:07:31.915554000 +0000
++++ libvirt-2.1.0/libvirt.spec.in 2016-08-20 10:09:09.031554000 +0000
+@@ -1827,7 +1827,7 @@ exit 0
+ %{_datadir}/libvirt/cpu_map.xml
+ %{_datadir}/libvirt/libvirtLogo.png
- %if %{with_sasl}
-%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
- %if %{with_wireshark}
-diff -urp libvirt-1.3.3.orig/src/qemu/qemu.conf libvirt-1.3.3/src/qemu/qemu.conf
---- libvirt-1.3.3.orig/src/qemu/qemu.conf 2016-04-14 10:16:00.616170000 +0000
-+++ libvirt-1.3.3/src/qemu/qemu.conf 2016-04-14 10:16:21.872170000 +0000
+ %files admin
+ %{_mandir}/man1/virt-admin.1*
+diff -urp libvirt-2.1.0.orig/src/qemu/qemu.conf libvirt-2.1.0/src/qemu/qemu.conf
+--- libvirt-2.1.0.orig/src/qemu/qemu.conf 2016-08-20 10:07:31.997554000 +0000
++++ libvirt-2.1.0/src/qemu/qemu.conf 2016-08-20 10:07:47.087554000 +0000
@@ -74,18 +74,18 @@
# Examples include vinagre, virt-viewer and virt-manager
# itself. UltraVNC, RealVNC, TightVNC do not support this
# QEMU implements an extension for providing audio over a VNC connection,
-@@ -143,17 +143,17 @@
+@@ -154,17 +154,17 @@
# Enable use of SASL encryption on the SPICE server. This requires
# a SPICE client which supports the SASL protocol extension.
#
# By default, if no graphical front end is configured, libvirt will disable
-diff -urp libvirt-1.3.3.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-1.3.3/src/qemu/test_libvirtd_qemu.aug.in
---- libvirt-1.3.3.orig/src/qemu/test_libvirtd_qemu.aug.in 2016-04-14 10:16:00.617170000 +0000
-+++ libvirt-1.3.3/src/qemu/test_libvirtd_qemu.aug.in 2016-04-14 10:16:21.872170000 +0000
-@@ -9,14 +9,14 @@ module Test_libvirtd_qemu =
+diff -urp libvirt-2.1.0.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-2.1.0/src/qemu/test_libvirtd_qemu.aug.in
+--- libvirt-2.1.0.orig/src/qemu/test_libvirtd_qemu.aug.in 2016-08-20 10:07:31.997554000 +0000
++++ libvirt-2.1.0/src/qemu/test_libvirtd_qemu.aug.in 2016-08-20 10:09:46.009554000 +0000
+@@ -9,7 +9,7 @@ module Test_libvirtd_qemu =
{ "vnc_tls_x509_verify" = "1" }
{ "vnc_password" = "XYZ12345" }
{ "vnc_sasl" = "1" }
{ "vnc_allow_host_audio" = "0" }
{ "spice_listen" = "0.0.0.0" }
{ "spice_tls" = "1" }
- { "spice_tls_x509_cert_dir" = "/etc/pki/libvirt-spice" }
+@@ -17,7 +17,7 @@ module Test_libvirtd_qemu =
+ { "spice_auto_unix_socket" = "1" }
{ "spice_password" = "XYZ12345" }
{ "spice_sasl" = "1" }
-{ "spice_sasl_dir" = "/some/directory/sasl2" }
{ "nographics_allow_host_audio" = "1" }
{ "remote_display_port_min" = "5900" }
{ "remote_display_port_max" = "65535" }
-diff -urp libvirt-1.3.3.orig/tests/confdata/libvirtd.conf libvirt-1.3.3/tests/confdata/libvirtd.conf
---- libvirt-1.3.3.orig/tests/confdata/libvirtd.conf 2016-04-14 10:16:00.575170000 +0000
-+++ libvirt-1.3.3/tests/confdata/libvirtd.conf 2016-04-14 10:16:21.872170000 +0000
-@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
- # the network providing auth (eg, TLS/x509 certificates)
- #
- # - sasl: use SASL infrastructure. The actual auth scheme is then
--# controlled from /etc/sasl2/libvirt.conf. For the TCP
-+# controlled from /etc/sasl/libvirt.conf. For the TCP
- # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
- #
-@@ -139,7 +139,7 @@ auth_unix_rw = "none"
- # If you don't enable SASL, then all TCP traffic is cleartext.
- # Don't do this outside of a dev/test scenario. For real world
- # use, always enable SASL and use the GSSAPI or DIGEST-MD5
--# mechanism in /etc/sasl2/libvirt.conf
-+# mechanism in /etc/sasl/libvirt.conf
- auth_tcp = "sasl"
-
- # Change the authentication scheme for TLS sockets.
-diff -urp libvirt-1.3.3.orig/tests/confdata/libvirtd.out libvirt-1.3.3/tests/confdata/libvirtd.out
---- libvirt-1.3.3.orig/tests/confdata/libvirtd.out 2016-04-14 10:16:00.575170000 +0000
-+++ libvirt-1.3.3/tests/confdata/libvirtd.out 2016-04-14 10:16:21.872170000 +0000
-@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
- # the network providing auth (eg, TLS/x509 certificates)
- #
- # - sasl: use SASL infrastructure. The actual auth scheme is then
--# controlled from /etc/sasl2/libvirt.conf. For the TCP
-+# controlled from /etc/sasl/libvirt.conf. For the TCP
- # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
- #
-@@ -116,7 +116,7 @@ auth_unix_rw = "none"
- # If you don't enable SASL, then all TCP traffic is cleartext.
- # Don't do this outside of a dev/test scenario. For real world
- # use, always enable SASL and use the GSSAPI or DIGEST-MD5
--# mechanism in /etc/sasl2/libvirt.conf
-+# mechanism in /etc/sasl/libvirt.conf
- auth_tcp = "sasl"
- # Change the authentication scheme for TLS sockets.
- #
-diff -urp libvirt-1.3.3.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args libvirt-1.3.3/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args
---- libvirt-1.3.3.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-04-14 10:15:59.729170000 +0000
-+++ libvirt-1.3.3/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-04-14 10:16:21.873170000 +0000
+diff -urp libvirt-2.1.0.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args libvirt-2.1.0/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args
+--- libvirt-2.1.0.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-08-20 10:07:32.590554000 +0000
++++ libvirt-2.1.0/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-08-20 10:07:48.739554000 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.3.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args libvirt-1.3.3/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args
---- libvirt-1.3.3.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-04-14 10:15:59.730170000 +0000
-+++ libvirt-1.3.3/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-04-14 10:16:21.873170000 +0000
+diff -urp libvirt-2.1.0.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args libvirt-2.1.0/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args
+--- libvirt-2.1.0.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-08-20 10:07:32.591554000 +0000
++++ libvirt-2.1.0/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-08-20 10:07:48.739554000 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args
---- libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-04-14 10:15:59.691170000 +0000
-+++ libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-04-14 10:16:21.873170000 +0000
+diff -urp libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args
+--- libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-08-20 10:07:32.622554000 +0000
++++ libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-08-20 10:07:48.740554000 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
QEMU_AUDIO_DRV=spice \
/usr/bin/qemu \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args
---- libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-04-14 10:15:59.692170000 +0000
-+++ libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-04-14 10:16:21.874170000 +0000
+diff -urp libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args
+--- libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-08-20 10:07:32.623554000 +0000
++++ libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-08-20 10:07:48.740554000 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args
---- libvirt-1.3.3.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-04-14 10:15:59.672170000 +0000
-+++ libvirt-1.3.3/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-04-14 10:16:21.874170000 +0000
+diff -urp libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args
+--- libvirt-2.1.0.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-08-20 10:07:32.623554000 +0000
++++ libvirt-2.1.0/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-08-20 10:07:48.740554000 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.3.orig/tests/qemuxml2argvtest.c libvirt-1.3.3/tests/qemuxml2argvtest.c
---- libvirt-1.3.3.orig/tests/qemuxml2argvtest.c 2016-04-14 10:15:59.666170000 +0000
-+++ libvirt-1.3.3/tests/qemuxml2argvtest.c 2016-04-14 10:16:21.875170000 +0000
-@@ -897,7 +897,7 @@ mymain(void)
+diff -urp libvirt-2.1.0.orig/tests/qemuxml2argvtest.c libvirt-2.1.0/tests/qemuxml2argvtest.c
+--- libvirt-2.1.0.orig/tests/qemuxml2argvtest.c 2016-08-20 10:07:32.132554000 +0000
++++ libvirt-2.1.0/tests/qemuxml2argvtest.c 2016-08-20 10:07:48.741554000 +0000
+@@ -929,7 +929,7 @@ mymain(void)
driver.config->vncSASL = 1;
VIR_FREE(driver.config->vncSASLdir);
DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC);
driver.config->vncTLS = 1;
driver.config->vncTLSx509verify = 1;
-@@ -919,7 +919,7 @@ mymain(void)
+@@ -953,7 +953,7 @@ mymain(void)
DO_TEST("graphics-spice-no-args",
QEMU_CAPS_SPICE);
driver.config->spiceSASL = 1;
DO_TEST("graphics-spice-sasl",
QEMU_CAPS_VGA_QXL,
QEMU_CAPS_SPICE,
+diff -urp libvirt-2.1.0.orig/tests/virconfdata/libvirtd.conf libvirt-2.1.0/tests/virconfdata/libvirtd.conf
+--- libvirt-2.1.0.orig/tests/virconfdata/libvirtd.conf 2016-08-20 10:07:33.070554000 +0000
++++ libvirt-2.1.0/tests/virconfdata/libvirtd.conf 2016-08-20 10:09:58.088554000 +0000
+@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
+ # the network providing auth (eg, TLS/x509 certificates)
+ #
+ # - sasl: use SASL infrastructure. The actual auth scheme is then
+-# controlled from /etc/sasl2/libvirt.conf. For the TCP
++# controlled from /etc/sasl/libvirt.conf. For the TCP
+ # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+ # For non-TCP or TLS sockets, any scheme is allowed.
+ #
+@@ -139,7 +139,7 @@ auth_unix_rw = "none"
+ # If you don't enable SASL, then all TCP traffic is cleartext.
+ # Don't do this outside of a dev/test scenario. For real world
+ # use, always enable SASL and use the GSSAPI or DIGEST-MD5
+-# mechanism in /etc/sasl2/libvirt.conf
++# mechanism in /etc/sasl/libvirt.conf
+ auth_tcp = "sasl"
+
+ # Change the authentication scheme for TLS sockets.
+diff -urp libvirt-2.1.0.orig/tests/virconfdata/libvirtd.out libvirt-2.1.0/tests/virconfdata/libvirtd.out
+--- libvirt-2.1.0.orig/tests/virconfdata/libvirtd.out 2016-08-20 10:07:33.070554000 +0000
++++ libvirt-2.1.0/tests/virconfdata/libvirtd.out 2016-08-20 10:10:07.948554000 +0000
+@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
+ # the network providing auth (eg, TLS/x509 certificates)
+ #
+ # - sasl: use SASL infrastructure. The actual auth scheme is then
+-# controlled from /etc/sasl2/libvirt.conf. For the TCP
++# controlled from /etc/sasl/libvirt.conf. For the TCP
+ # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+ # For non-TCP or TLS sockets, any scheme is allowed.
+ #
+@@ -116,7 +116,7 @@ auth_unix_rw = "none"
+ # If you don't enable SASL, then all TCP traffic is cleartext.
+ # Don't do this outside of a dev/test scenario. For real world
+ # use, always enable SASL and use the GSSAPI or DIGEST-MD5
+-# mechanism in /etc/sasl2/libvirt.conf
++# mechanism in /etc/sasl/libvirt.conf
+ auth_tcp = "sasl"
+ # Change the authentication scheme for TLS sockets.
+ #
TLD / packages / libvirt.git / blobdiff