-diff -urp libvirt-1.3.2.orig/daemon/libvirtd.conf libvirt-1.3.2/daemon/libvirtd.conf
---- libvirt-1.3.2.orig/daemon/libvirtd.conf 2016-01-10 01:57:37.000000000 +0000
-+++ libvirt-1.3.2/daemon/libvirtd.conf 2016-03-18 06:57:24.113768000 +0000
-@@ -128,7 +128,7 @@
+diff -urp libvirt-4.0.0.orig/daemon/libvirtd.conf libvirt-4.0.0/daemon/libvirtd.conf
+--- libvirt-4.0.0.orig/daemon/libvirtd.conf 2018-01-24 11:43:38.147588228 +0000
++++ libvirt-4.0.0/daemon/libvirtd.conf 2018-01-24 11:44:02.010586806 +0000
+@@ -123,7 +123,7 @@
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -159,7 +159,7 @@
+@@ -154,7 +154,7 @@
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
-diff -urp libvirt-1.3.2.orig/daemon/Makefile.am libvirt-1.3.2/daemon/Makefile.am
---- libvirt-1.3.2.orig/daemon/Makefile.am 2016-02-24 01:55:16.000000000 +0000
-+++ libvirt-1.3.2/daemon/Makefile.am 2016-03-18 06:57:24.114768000 +0000
-@@ -521,13 +521,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
+diff -urp libvirt-4.0.0.orig/daemon/Makefile.am libvirt-4.0.0/daemon/Makefile.am
+--- libvirt-4.0.0.orig/daemon/Makefile.am 2018-01-24 11:43:38.146588228 +0000
++++ libvirt-4.0.0/daemon/Makefile.am 2018-01-24 11:44:02.010586806 +0000
+@@ -477,13 +477,13 @@ POD2MAN = pod2man -c "Virtualization Sup
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
else ! WITH_SASL
install-data-sasl:
uninstall-data-sasl:
-diff -urp libvirt-1.3.2.orig/daemon/Makefile.in libvirt-1.3.2/daemon/Makefile.in
---- libvirt-1.3.2.orig/daemon/Makefile.in 2016-03-01 03:19:22.000000000 +0000
-+++ libvirt-1.3.2/daemon/Makefile.in 2016-03-18 12:16:33.415768000 +0000
-@@ -2832,13 +2832,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
+diff -urp libvirt-4.0.0.orig/daemon/Makefile.in libvirt-4.0.0/daemon/Makefile.in
+--- libvirt-4.0.0.orig/daemon/Makefile.in 2018-01-24 11:43:38.146588228 +0000
++++ libvirt-4.0.0/daemon/Makefile.in 2018-01-24 11:44:02.010586806 +0000
+@@ -2941,13 +2941,13 @@ admin_dispatch.h: $(top_srcdir)/src/rpc/
# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
@WITH_SASL_TRUE@install-data-sasl:
@WITH_SASL_FALSE@install-data-sasl:
@WITH_SASL_FALSE@uninstall-data-sasl:
-diff -urp libvirt-1.3.2.orig/docs/auth.html libvirt-1.3.2/docs/auth.html
---- libvirt-1.3.2.orig/docs/auth.html 2016-02-24 01:58:13.000000000 +0000
-+++ libvirt-1.3.2/docs/auth.html 2016-03-18 06:57:24.115768000 +0000
-@@ -400,7 +400,7 @@ again:
- The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
- The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
- username+password style authentication. To enable Kerberos single-sign-on instead,
--the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
-+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
- The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>, and keytab should be set to
- <code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
-diff -urp libvirt-1.3.2.orig/docs/auth.html.in libvirt-1.3.2/docs/auth.html.in
---- libvirt-1.3.2.orig/docs/auth.html.in 2015-01-23 11:44:53.000000000 +0000
-+++ libvirt-1.3.2/docs/auth.html.in 2016-03-18 06:57:24.116768000 +0000
-@@ -234,7 +234,7 @@ again:
- The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
- The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
- username+password style authentication. To enable Kerberos single-sign-on instead,
--the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
-+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
- The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>, and keytab should be set to
- <code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
-diff -urp libvirt-1.3.2.orig/libvirt.spec libvirt-1.3.2/libvirt.spec
---- libvirt-1.3.2.orig/libvirt.spec 2016-03-01 03:20:27.000000000 +0000
-+++ libvirt-1.3.2/libvirt.spec 2016-03-18 06:57:24.118768000 +0000
-@@ -2316,7 +2316,7 @@ exit 0
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
+diff -urp libvirt-4.0.0.orig/docs/auth.html libvirt-4.0.0/docs/auth.html
+--- libvirt-4.0.0.orig/docs/auth.html 2018-01-24 11:43:38.029588235 +0000
++++ libvirt-4.0.0/docs/auth.html 2018-01-24 11:44:02.011586806 +0000
+@@ -338,7 +338,7 @@ to turn on SASL auth in these listeners.
+ <p>
+ Since the libvirt SASL config file defaults to using GSSAPI (Kerberos), a
+ config change is rquired to enable plain password auth. This is done by
+-editting <code>/etc/sasl2/libvirt.conf</code> to set the <code>mech_list</code>
++editting <code>/etc/sasl/libvirt.conf</code> to set the <code>mech_list</code>
+ parameter to <code>scram-sha-1</code>.
+ </p>
+ <p>
+diff -urp libvirt-4.0.0.orig/docs/auth.html.in libvirt-4.0.0/docs/auth.html.in
+--- libvirt-4.0.0.orig/docs/auth.html.in 2018-01-24 11:43:38.033588235 +0000
++++ libvirt-4.0.0/docs/auth.html.in 2018-01-24 11:44:02.011586806 +0000
+@@ -267,7 +267,7 @@ to turn on SASL auth in these listeners.
+ <p>
+ Since the libvirt SASL config file defaults to using GSSAPI (Kerberos), a
+ config change is rquired to enable plain password auth. This is done by
+-editting <code>/etc/sasl2/libvirt.conf</code> to set the <code>mech_list</code>
++editting <code>/etc/sasl/libvirt.conf</code> to set the <code>mech_list</code>
+ parameter to <code>scram-sha-1</code>.
+ </p>
+ <p>
+diff -urp libvirt-4.0.0.orig/libvirt.spec libvirt-4.0.0/libvirt.spec
+--- libvirt-4.0.0.orig/libvirt.spec 2018-01-24 11:43:38.090588232 +0000
++++ libvirt-4.0.0/libvirt.spec 2018-01-24 11:44:02.011586806 +0000
+@@ -2106,7 +2106,7 @@ exit 0
+
+ %{_datadir}/libvirt/test-screenshot.png
- %if %{with_sasl}
-%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
- %if %{with_wireshark}
-diff -urp libvirt-1.3.2.orig/libvirt.spec.in libvirt-1.3.2/libvirt.spec.in
---- libvirt-1.3.2.orig/libvirt.spec.in 2016-03-01 03:18:39.000000000 +0000
-+++ libvirt-1.3.2/libvirt.spec.in 2016-03-18 06:57:24.119768000 +0000
-@@ -2316,7 +2316,7 @@ exit 0
- %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
+ %files admin
+ %{_mandir}/man1/virt-admin.1*
+diff -urp libvirt-4.0.0.orig/libvirt.spec.in libvirt-4.0.0/libvirt.spec.in
+--- libvirt-4.0.0.orig/libvirt.spec.in 2018-01-24 11:43:38.089588232 +0000
++++ libvirt-4.0.0/libvirt.spec.in 2018-01-24 11:44:02.011586806 +0000
+@@ -2106,7 +2106,7 @@ exit 0
+
+ %{_datadir}/libvirt/test-screenshot.png
- %if %{with_sasl}
-%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
- %endif
- %if %{with_wireshark}
-diff -urp libvirt-1.3.2.orig/src/qemu/qemu.conf libvirt-1.3.2/src/qemu/qemu.conf
---- libvirt-1.3.2.orig/src/qemu/qemu.conf 2015-11-27 12:43:23.000000000 +0000
-+++ libvirt-1.3.2/src/qemu/qemu.conf 2016-03-18 12:16:11.751768000 +0000
-@@ -74,18 +74,18 @@
+ %files admin
+ %{_mandir}/man1/virt-admin.1*
+diff -urp libvirt-4.0.0.orig/src/qemu/qemu.conf libvirt-4.0.0/src/qemu/qemu.conf
+--- libvirt-4.0.0.orig/src/qemu/qemu.conf 2018-01-24 11:43:38.123588230 +0000
++++ libvirt-4.0.0/src/qemu/qemu.conf 2018-01-24 11:44:02.012586806 +0000
+@@ -129,18 +129,18 @@
# Examples include vinagre, virt-viewer and virt-manager
# itself. UltraVNC, RealVNC, TightVNC do not support this
#
# QEMU implements an extension for providing audio over a VNC connection,
-@@ -143,17 +143,17 @@
+@@ -205,17 +205,17 @@
# Enable use of SASL encryption on the SPICE server. This requires
# a SPICE client which supports the SASL protocol extension.
#
-#spice_sasl_dir = "/some/directory/sasl2"
+#spice_sasl_dir = "/some/directory/sasl"
-
- # By default, if no graphical front end is configured, libvirt will disable
-diff -urp libvirt-1.3.2.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-1.3.2/src/qemu/test_libvirtd_qemu.aug.in
---- libvirt-1.3.2.orig/src/qemu/test_libvirtd_qemu.aug.in 2015-11-27 12:43:23.000000000 +0000
-+++ libvirt-1.3.2/src/qemu/test_libvirtd_qemu.aug.in 2016-03-18 12:16:00.319768000 +0000
-@@ -9,14 +9,14 @@ module Test_libvirtd_qemu =
+ # Enable use of TLS encryption on the chardev TCP transports.
+ #
+diff -urp libvirt-4.0.0.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-4.0.0/src/qemu/test_libvirtd_qemu.aug.in
+--- libvirt-4.0.0.orig/src/qemu/test_libvirtd_qemu.aug.in 2018-01-24 11:43:38.123588230 +0000
++++ libvirt-4.0.0/src/qemu/test_libvirtd_qemu.aug.in 2018-01-24 11:44:02.012586806 +0000
+@@ -12,7 +12,7 @@ module Test_libvirtd_qemu =
{ "vnc_tls_x509_verify" = "1" }
{ "vnc_password" = "XYZ12345" }
{ "vnc_sasl" = "1" }
{ "vnc_allow_host_audio" = "0" }
{ "spice_listen" = "0.0.0.0" }
{ "spice_tls" = "1" }
- { "spice_tls_x509_cert_dir" = "/etc/pki/libvirt-spice" }
+@@ -20,7 +20,7 @@ module Test_libvirtd_qemu =
+ { "spice_auto_unix_socket" = "1" }
{ "spice_password" = "XYZ12345" }
{ "spice_sasl" = "1" }
-{ "spice_sasl_dir" = "/some/directory/sasl2" }
+{ "spice_sasl_dir" = "/some/directory/sasl" }
- { "nographics_allow_host_audio" = "1" }
- { "remote_display_port_min" = "5900" }
- { "remote_display_port_max" = "65535" }
-diff -urp libvirt-1.3.2.orig/tests/confdata/libvirtd.conf libvirt-1.3.2/tests/confdata/libvirtd.conf
---- libvirt-1.3.2.orig/tests/confdata/libvirtd.conf 2015-06-28 03:29:13.000000000 +0000
-+++ libvirt-1.3.2/tests/confdata/libvirtd.conf 2016-03-18 06:57:24.120768000 +0000
-@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
- # the network providing auth (eg, TLS/x509 certificates)
- #
- # - sasl: use SASL infrastructure. The actual auth scheme is then
--# controlled from /etc/sasl2/libvirt.conf. For the TCP
-+# controlled from /etc/sasl/libvirt.conf. For the TCP
- # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
- #
-@@ -139,7 +139,7 @@ auth_unix_rw = "none"
- # If you don't enable SASL, then all TCP traffic is cleartext.
- # Don't do this outside of a dev/test scenario. For real world
- # use, always enable SASL and use the GSSAPI or DIGEST-MD5
--# mechanism in /etc/sasl2/libvirt.conf
-+# mechanism in /etc/sasl/libvirt.conf
- auth_tcp = "sasl"
-
- # Change the authentication scheme for TLS sockets.
-diff -urp libvirt-1.3.2.orig/tests/confdata/libvirtd.out libvirt-1.3.2/tests/confdata/libvirtd.out
---- libvirt-1.3.2.orig/tests/confdata/libvirtd.out 2015-06-28 03:29:13.000000000 +0000
-+++ libvirt-1.3.2/tests/confdata/libvirtd.out 2016-03-18 06:57:24.121768000 +0000
-@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
- # the network providing auth (eg, TLS/x509 certificates)
- #
- # - sasl: use SASL infrastructure. The actual auth scheme is then
--# controlled from /etc/sasl2/libvirt.conf. For the TCP
-+# controlled from /etc/sasl/libvirt.conf. For the TCP
- # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
- #
-@@ -116,7 +116,7 @@ auth_unix_rw = "none"
- # If you don't enable SASL, then all TCP traffic is cleartext.
- # Don't do this outside of a dev/test scenario. For real world
- # use, always enable SASL and use the GSSAPI or DIGEST-MD5
--# mechanism in /etc/sasl2/libvirt.conf
-+# mechanism in /etc/sasl/libvirt.conf
- auth_tcp = "sasl"
- # Change the authentication scheme for TLS sockets.
- #
-diff -urp libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args
---- libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-02-16 14:25:07.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-03-18 12:15:39.783768000 +0000
+ { "chardev_tls" = "1" }
+ { "chardev_tls_x509_cert_dir" = "/etc/pki/libvirt-chardev" }
+ { "chardev_tls_x509_verify" = "1" }
+diff -urp libvirt-4.0.0.orig/tests/qemuargv2xmldata/graphics-vnc-sasl.args libvirt-4.0.0/tests/qemuargv2xmldata/graphics-vnc-sasl.args
+--- libvirt-4.0.0.orig/tests/qemuargv2xmldata/graphics-vnc-sasl.args 2018-01-24 11:43:39.724588134 +0000
++++ libvirt-4.0.0/tests/qemuargv2xmldata/graphics-vnc-sasl.args 2018-01-24 11:57:36.684538248 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
-SASL_CONF_PATH=/root/.sasl2 \
+SASL_CONF_PATH=/root/.sasl \
QEMU_AUDIO_DRV=none \
- /usr/bin/qemu \
+ /usr/bin/qemu-system-i686 \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args
---- libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-02-16 14:25:07.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-03-18 12:15:42.431768000 +0000
+diff -urp libvirt-4.0.0.orig/tests/qemuargv2xmldata/graphics-vnc-tls.args libvirt-4.0.0/tests/qemuargv2xmldata/graphics-vnc-tls.args
+--- libvirt-4.0.0.orig/tests/qemuargv2xmldata/graphics-vnc-tls.args 2018-01-24 11:43:39.724588134 +0000
++++ libvirt-4.0.0/tests/qemuargv2xmldata/graphics-vnc-tls.args 2018-01-24 11:57:57.508537006 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
-SASL_CONF_PATH=/root/.sasl2 \
+SASL_CONF_PATH=/root/.sasl \
QEMU_AUDIO_DRV=none \
- /usr/bin/qemu \
+ /usr/bin/qemu-system-i686 \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args
---- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-01-10 01:57:37.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-03-18 12:13:04.244768000 +0000
+diff -urp libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-spice-sasl.args libvirt-4.0.0/tests/qemuxml2argvdata/graphics-spice-sasl.args
+--- libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-spice-sasl.args 2018-01-24 11:43:39.747588133 +0000
++++ libvirt-4.0.0/tests/qemuxml2argvdata/graphics-spice-sasl.args 2018-01-24 11:58:03.869536627 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
-SASL_CONF_PATH=/root/.sasl2 \
+SASL_CONF_PATH=/root/.sasl \
QEMU_AUDIO_DRV=spice \
- /usr/bin/qemu \
+ /usr/bin/qemu-system-i686 \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args
---- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-02-16 14:25:07.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-03-18 12:12:18.798768000 +0000
+diff -urp libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-vnc-sasl.args libvirt-4.0.0/tests/qemuxml2argvdata/graphics-vnc-sasl.args
+--- libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-vnc-sasl.args 2018-01-24 11:43:39.747588133 +0000
++++ libvirt-4.0.0/tests/qemuxml2argvdata/graphics-vnc-sasl.args 2018-01-24 11:58:00.876536806 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
-SASL_CONF_PATH=/root/.sasl2 \
+SASL_CONF_PATH=/root/.sasl \
QEMU_AUDIO_DRV=none \
- /usr/bin/qemu \
+ /usr/bin/qemu-system-i686 \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args
---- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-02-16 14:25:07.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-03-18 12:12:35.964768000 +0000
+diff -urp libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-vnc-tls.args libvirt-4.0.0/tests/qemuxml2argvdata/graphics-vnc-tls.args
+--- libvirt-4.0.0.orig/tests/qemuxml2argvdata/graphics-vnc-tls.args 2018-01-24 11:43:39.747588133 +0000
++++ libvirt-4.0.0/tests/qemuxml2argvdata/graphics-vnc-tls.args 2018-01-24 11:58:06.308536482 +0000
@@ -3,7 +3,7 @@ PATH=/bin \
HOME=/home/test \
USER=test \
-SASL_CONF_PATH=/root/.sasl2 \
+SASL_CONF_PATH=/root/.sasl \
QEMU_AUDIO_DRV=none \
- /usr/bin/qemu \
+ /usr/bin/qemu-system-i686 \
-name QEMUGuest1 \
-diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvtest.c libvirt-1.3.2/tests/qemuxml2argvtest.c
---- libvirt-1.3.2.orig/tests/qemuxml2argvtest.c 2016-02-27 03:16:01.000000000 +0000
-+++ libvirt-1.3.2/tests/qemuxml2argvtest.c 2016-03-18 12:11:24.793768000 +0000
-@@ -921,7 +921,7 @@ mymain(void)
+diff -urp libvirt-4.0.0.orig/tests/qemuxml2argvtest.c libvirt-4.0.0/tests/qemuxml2argvtest.c
+--- libvirt-4.0.0.orig/tests/qemuxml2argvtest.c 2018-01-24 11:43:38.900588183 +0000
++++ libvirt-4.0.0/tests/qemuxml2argvtest.c 2018-01-24 11:44:07.107586502 +0000
+@@ -1092,7 +1092,7 @@ mymain(void)
driver.config->vncSASL = 1;
VIR_FREE(driver.config->vncSASLdir);
- ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl2"));
+ ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl"));
- DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC);
+ DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->vncTLS = 1;
driver.config->vncTLSx509verify = 1;
-@@ -941,7 +941,7 @@ mymain(void)
- QEMU_CAPS_DEVICE_QXL,
- QEMU_CAPS_SPICE_FILE_XFER_DISABLE);
+@@ -1116,7 +1116,7 @@ mymain(void)
+ DO_TEST("graphics-spice-no-args",
+ QEMU_CAPS_SPICE, QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->spiceSASL = 1;
- ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl2"));
+ ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl"));
DO_TEST("graphics-spice-sasl",
- QEMU_CAPS_VGA_QXL,
QEMU_CAPS_SPICE,
+ QEMU_CAPS_DEVICE_QXL);
+diff -urp libvirt-4.0.0.orig/tests/virconfdata/libvirtd.conf libvirt-4.0.0/tests/virconfdata/libvirtd.conf
+--- libvirt-4.0.0.orig/tests/virconfdata/libvirtd.conf 2018-01-24 11:43:38.873588185 +0000
++++ libvirt-4.0.0/tests/virconfdata/libvirtd.conf 2018-01-24 11:44:07.107586502 +0000
+@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
+ # the network providing auth (eg, TLS/x509 certificates)
+ #
+ # - sasl: use SASL infrastructure. The actual auth scheme is then
+-# controlled from /etc/sasl2/libvirt.conf. For the TCP
++# controlled from /etc/sasl/libvirt.conf. For the TCP
+ # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+ # For non-TCP or TLS sockets, any scheme is allowed.
+ #
+@@ -139,7 +139,7 @@ auth_unix_rw = "none"
+ # If you don't enable SASL, then all TCP traffic is cleartext.
+ # Don't do this outside of a dev/test scenario. For real world
+ # use, always enable SASL and use the GSSAPI or DIGEST-MD5
+-# mechanism in /etc/sasl2/libvirt.conf
++# mechanism in /etc/sasl/libvirt.conf
+ auth_tcp = "sasl"
+
+ # Change the authentication scheme for TLS sockets.
+diff -urp libvirt-4.0.0.orig/tests/virconfdata/libvirtd.out libvirt-4.0.0/tests/virconfdata/libvirtd.out
+--- libvirt-4.0.0.orig/tests/virconfdata/libvirtd.out 2018-01-24 11:43:38.873588185 +0000
++++ libvirt-4.0.0/tests/virconfdata/libvirtd.out 2018-01-24 11:44:07.108586502 +0000
+@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
+ # the network providing auth (eg, TLS/x509 certificates)
+ #
+ # - sasl: use SASL infrastructure. The actual auth scheme is then
+-# controlled from /etc/sasl2/libvirt.conf. For the TCP
++# controlled from /etc/sasl/libvirt.conf. For the TCP
+ # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+ # For non-TCP or TLS sockets, any scheme is allowed.
+ #
+@@ -116,7 +116,7 @@ auth_unix_rw = "none"
+ # If you don't enable SASL, then all TCP traffic is cleartext.
+ # Don't do this outside of a dev/test scenario. For real world
+ # use, always enable SASL and use the GSSAPI or DIGEST-MD5
+-# mechanism in /etc/sasl2/libvirt.conf
++# mechanism in /etc/sasl/libvirt.conf
+ auth_tcp = "sasl"
+ # Change the authentication scheme for TLS sockets.
+ #
TLD / packages / libvirt.git / blobdiff