-diff -ru libvirt-0.8.8/daemon/libvirtd.conf libvirt-0.8.8-sasl/daemon/libvirtd.conf
---- libvirt-0.8.8/daemon/libvirtd.conf 2010-12-20 14:35:22.000000000 +0100
-+++ libvirt-0.8.8-sasl/daemon/libvirtd.conf 2011-04-28 11:45:47.727741165 +0200
-@@ -111,7 +111,7 @@
+diff -urp libvirt-1.3.2.orig/daemon/libvirtd.conf libvirt-1.3.2/daemon/libvirtd.conf
+--- libvirt-1.3.2.orig/daemon/libvirtd.conf 2016-01-10 01:57:37.000000000 +0000
++++ libvirt-1.3.2/daemon/libvirtd.conf 2016-03-18 06:57:24.113768000 +0000
+@@ -128,7 +128,7 @@
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
-# controlled from /etc/sasl2/libvirt.conf. For the TCP
+# controlled from /etc/sasl/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
- # For non-TCP or TLS sockets, any scheme is allowed.
+ # For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -142,7 +142,7 @@
+@@ -159,7 +159,7 @@
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
---- libvirt-1.1.3/daemon/Makefile.am.orig 2013-10-22 16:46:45.409294047 +0200
-+++ libvirt-1.1.3/daemon/Makefile.am 2013-10-22 20:09:12.185450964 +0200
-@@ -453,13 +453,13 @@
+diff -urp libvirt-1.3.2.orig/daemon/Makefile.am libvirt-1.3.2/daemon/Makefile.am
+--- libvirt-1.3.2.orig/daemon/Makefile.am 2016-02-24 01:55:16.000000000 +0000
++++ libvirt-1.3.2/daemon/Makefile.am 2016-03-18 06:57:24.114768000 +0000
+@@ -521,13 +521,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
else ! WITH_SASL
install-data-sasl:
uninstall-data-sasl:
-diff -ru libvirt-0.8.8/daemon/test_libvirtd.aug libvirt-0.8.8-sasl/daemon/test_libvirtd.aug
-diff -ru libvirt-0.8.8/docs/auth.html libvirt-0.8.8-sasl/docs/auth.html
---- libvirt-0.8.8/docs/auth.html 2011-02-17 05:13:12.000000000 +0100
-+++ libvirt-0.8.8-sasl/docs/auth.html 2011-04-28 11:45:43.429741167 +0200
-@@ -273,7 +273,7 @@
+diff -urp libvirt-1.3.2.orig/daemon/Makefile.in libvirt-1.3.2/daemon/Makefile.in
+--- libvirt-1.3.2.orig/daemon/Makefile.in 2016-03-01 03:19:22.000000000 +0000
++++ libvirt-1.3.2/daemon/Makefile.in 2016-03-18 12:16:33.415768000 +0000
+@@ -2832,13 +2832,13 @@ $(srcdir)/libvirtd.8.in: libvirtd.pod.in
+ # This is needed for clients too, so can't wrap in
+ # the WITH_LIBVIRTD conditional
+ @WITH_SASL_TRUE@install-data-sasl:
+-@WITH_SASL_TRUE@ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
++@WITH_SASL_TRUE@ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl/
+ @WITH_SASL_TRUE@ $(INSTALL_DATA) $(srcdir)/libvirtd.sasl \
+-@WITH_SASL_TRUE@ $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
++@WITH_SASL_TRUE@ $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
+
+ @WITH_SASL_TRUE@uninstall-data-sasl:
+-@WITH_SASL_TRUE@ rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
+-@WITH_SASL_TRUE@ rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
++@WITH_SASL_TRUE@ rm -f $(DESTDIR)$(sysconfdir)/sasl/libvirt.conf
++@WITH_SASL_TRUE@ rmdir $(DESTDIR)$(sysconfdir)/sasl/ || :
+ @WITH_SASL_FALSE@install-data-sasl:
+ @WITH_SASL_FALSE@uninstall-data-sasl:
+
+diff -urp libvirt-1.3.2.orig/docs/auth.html libvirt-1.3.2/docs/auth.html
+--- libvirt-1.3.2.orig/docs/auth.html 2016-02-24 01:58:13.000000000 +0000
++++ libvirt-1.3.2/docs/auth.html 2016-03-18 06:57:24.115768000 +0000
+@@ -400,7 +400,7 @@ again:
The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
username+password style authentication. To enable Kerberos single-sign-on instead,
-the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>. If SASL is enabled on the UNIX
- and/or TLS sockets, Kerberos will also be used for them. Like DIGEST-MD5, the Kerberos
-diff -ru libvirt-0.8.8/docs/auth.html.in libvirt-0.8.8-sasl/docs/auth.html.in
---- libvirt-0.8.8/docs/auth.html.in 2010-12-20 14:35:22.000000000 +0100
-+++ libvirt-0.8.8-sasl/docs/auth.html.in 2011-04-28 11:45:43.586741167 +0200
-@@ -115,7 +115,7 @@
+ instead of the default <code>digest-md5</code>, and keytab should be set to
+ <code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
+diff -urp libvirt-1.3.2.orig/docs/auth.html.in libvirt-1.3.2/docs/auth.html.in
+--- libvirt-1.3.2.orig/docs/auth.html.in 2015-01-23 11:44:53.000000000 +0000
++++ libvirt-1.3.2/docs/auth.html.in 2016-03-18 06:57:24.116768000 +0000
+@@ -234,7 +234,7 @@ again:
The plain TCP socket of the libvirt daemon defaults to using SASL for authentication.
The SASL mechanism configured by default is DIGEST-MD5, which provides a basic
username+password style authentication. To enable Kerberos single-sign-on instead,
-the libvirt SASL configuration file must be changed. This is <code>/etc/sasl2/libvirt.conf</code>.
+the libvirt SASL configuration file must be changed. This is <code>/etc/sasl/libvirt.conf</code>.
The <code>mech_list</code> parameter must first be changed to <code>gssapi</code>
- instead of the default <code>digest-md5</code>. If SASL is enabled on the UNIX
- and/or TLS sockets, Kerberos will also be used for them. Like DIGEST-MD5, the Kerberos
-diff -ru libvirt-0.8.8/libvirt.spec libvirt-0.8.8-sasl/libvirt.spec
---- libvirt-0.8.8/libvirt.spec 2011-02-17 05:13:09.000000000 +0100
-+++ libvirt-0.8.8-sasl/libvirt.spec 2011-04-28 11:45:43.675741167 +0200
-@@ -933,7 +933,7 @@
+ instead of the default <code>digest-md5</code>, and keytab should be set to
+ <code>/etc/libvirt/krb5.tab</code> . If SASL is enabled on the UNIX
+diff -urp libvirt-1.3.2.orig/libvirt.spec libvirt-1.3.2/libvirt.spec
+--- libvirt-1.3.2.orig/libvirt.spec 2016-03-01 03:20:27.000000000 +0000
++++ libvirt-1.3.2/libvirt.spec 2016-03-18 06:57:24.118768000 +0000
+@@ -2316,7 +2316,7 @@ exit 0
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
%if %{with_sasl}
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
%endif
- %files devel
-diff -ru libvirt-0.8.8/libvirt.spec.in libvirt-0.8.8-sasl/libvirt.spec.in
---- libvirt-0.8.8/libvirt.spec.in 2011-02-17 05:10:58.000000000 +0100
-+++ libvirt-0.8.8-sasl/libvirt.spec.in 2011-04-28 11:45:43.672741167 +0200
-@@ -933,7 +933,7 @@
+ %if %{with_wireshark}
+diff -urp libvirt-1.3.2.orig/libvirt.spec.in libvirt-1.3.2/libvirt.spec.in
+--- libvirt-1.3.2.orig/libvirt.spec.in 2016-03-01 03:18:39.000000000 +0000
++++ libvirt-1.3.2/libvirt.spec.in 2016-03-18 06:57:24.119768000 +0000
+@@ -2316,7 +2316,7 @@ exit 0
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
%if %{with_sasl}
+%config(noreplace) %{_sysconfdir}/sasl/libvirt.conf
%endif
- %files devel
---- libvirt-0.9.13/src/qemu/qemu.conf.orig 2012-05-31 16:23:22.000000000 +0200
-+++ libvirt-0.9.13/src/qemu/qemu.conf 2012-07-08 11:37:16.366378718 +0200
+ %if %{with_wireshark}
+diff -urp libvirt-1.3.2.orig/src/qemu/qemu.conf libvirt-1.3.2/src/qemu/qemu.conf
+--- libvirt-1.3.2.orig/src/qemu/qemu.conf 2015-11-27 12:43:23.000000000 +0000
++++ libvirt-1.3.2/src/qemu/qemu.conf 2016-03-18 12:16:11.751768000 +0000
@@ -74,18 +74,18 @@
# Examples include vinagre, virt-viewer and virt-manager
# itself. UltraVNC, RealVNC, TightVNC do not support this
# QEMU implements an extension for providing audio over a VNC connection,
-diff -ru libvirt-0.8.8/src/qemu/test_libvirtd_qemu.aug libvirt-0.8.8-sasl/src/qemu/test_libvirtd_qemu.aug
-diff -ru libvirt-0.8.8/tests/confdata/libvirtd.conf libvirt-0.8.8-sasl/tests/confdata/libvirtd.conf
---- libvirt-0.8.8/tests/confdata/libvirtd.conf 2010-05-27 14:03:22.000000000 +0200
-+++ libvirt-0.8.8-sasl/tests/confdata/libvirtd.conf 2011-04-28 11:45:46.878741165 +0200
-@@ -102,7 +102,7 @@
+@@ -143,17 +143,17 @@
+ # Enable use of SASL encryption on the SPICE server. This requires
+ # a SPICE client which supports the SASL protocol extension.
+ #
+-# It is necessary to configure /etc/sasl2/qemu.conf to choose
++# It is necessary to configure /etc/sasl/qemu.conf to choose
+ # the desired SASL plugin (eg, GSSPI for Kerberos)
+ #
+ #spice_sasl = 1
+
+-# The default SASL configuration file is located in /etc/sasl2/
++# The default SASL configuration file is located in /etc/sasl/
+ # When running libvirtd unprivileged, it may be desirable to
+ # override the configs in this location. Set this parameter to
+ # point to the directory, and create a qemu.conf in that location
+ #
+-#spice_sasl_dir = "/some/directory/sasl2"
++#spice_sasl_dir = "/some/directory/sasl"
+
+
+ # By default, if no graphical front end is configured, libvirt will disable
+diff -urp libvirt-1.3.2.orig/src/qemu/test_libvirtd_qemu.aug.in libvirt-1.3.2/src/qemu/test_libvirtd_qemu.aug.in
+--- libvirt-1.3.2.orig/src/qemu/test_libvirtd_qemu.aug.in 2015-11-27 12:43:23.000000000 +0000
++++ libvirt-1.3.2/src/qemu/test_libvirtd_qemu.aug.in 2016-03-18 12:16:00.319768000 +0000
+@@ -9,14 +9,14 @@ module Test_libvirtd_qemu =
+ { "vnc_tls_x509_verify" = "1" }
+ { "vnc_password" = "XYZ12345" }
+ { "vnc_sasl" = "1" }
+-{ "vnc_sasl_dir" = "/some/directory/sasl2" }
++{ "vnc_sasl_dir" = "/some/directory/sasl" }
+ { "vnc_allow_host_audio" = "0" }
+ { "spice_listen" = "0.0.0.0" }
+ { "spice_tls" = "1" }
+ { "spice_tls_x509_cert_dir" = "/etc/pki/libvirt-spice" }
+ { "spice_password" = "XYZ12345" }
+ { "spice_sasl" = "1" }
+-{ "spice_sasl_dir" = "/some/directory/sasl2" }
++{ "spice_sasl_dir" = "/some/directory/sasl" }
+ { "nographics_allow_host_audio" = "1" }
+ { "remote_display_port_min" = "5900" }
+ { "remote_display_port_max" = "65535" }
+diff -urp libvirt-1.3.2.orig/tests/confdata/libvirtd.conf libvirt-1.3.2/tests/confdata/libvirtd.conf
+--- libvirt-1.3.2.orig/tests/confdata/libvirtd.conf 2015-06-28 03:29:13.000000000 +0000
++++ libvirt-1.3.2/tests/confdata/libvirtd.conf 2016-03-18 06:57:24.120768000 +0000
+@@ -108,7 +108,7 @@ unix_sock_admin_perms = "0700"
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -133,7 +133,7 @@
+@@ -139,7 +139,7 @@ auth_unix_rw = "none"
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
-diff -ru libvirt-0.8.8/tests/confdata/libvirtd.out libvirt-0.8.8-sasl/tests/confdata/libvirtd.out
---- libvirt-0.8.8/tests/confdata/libvirtd.out 2010-05-27 14:03:22.000000000 +0200
-+++ libvirt-0.8.8-sasl/tests/confdata/libvirtd.out 2011-04-28 11:45:46.875741165 +0200
-@@ -82,7 +82,7 @@
+diff -urp libvirt-1.3.2.orig/tests/confdata/libvirtd.out libvirt-1.3.2/tests/confdata/libvirtd.out
+--- libvirt-1.3.2.orig/tests/confdata/libvirtd.out 2015-06-28 03:29:13.000000000 +0000
++++ libvirt-1.3.2/tests/confdata/libvirtd.out 2016-03-18 06:57:24.121768000 +0000
+@@ -87,7 +87,7 @@ unix_sock_admin_perms = "0700"
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
-@@ -111,7 +111,7 @@
+@@ -116,7 +116,7 @@ auth_unix_rw = "none"
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
#
---- libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args.orig 2014-07-03 20:04:05.132591762 +0200
-+++ libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2014-07-03 20:42:03.205829499 +0200
-@@ -1,5 +1,5 @@
- LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \
--SASL_CONF_PATH=/root/.sasl2 QEMU_AUDIO_DRV=none \
-+SASL_CONF_PATH=/root/.sasl QEMU_AUDIO_DRV=none \
- /usr/bin/qemu -S -M pc -m 214 \
- -smp 1 -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \
- /dev/HostVG/QEMUGuest1 -net none -serial none -parallel none -vnc \
---- libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args.orig 2014-07-03 20:04:05.132591762 +0200
-+++ libvirt-1.2.6/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2014-07-03 20:42:29.659161721 +0200
-@@ -1,5 +1,5 @@
- LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \
--SASL_CONF_PATH=/root/.sasl2 QEMU_AUDIO_DRV=none \
-+SASL_CONF_PATH=/root/.sasl QEMU_AUDIO_DRV=none \
- /usr/bin/qemu -S -M pc -m 214 \
- -smp 1 -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \
- /dev/HostVG/QEMUGuest1 -net none -serial none -parallel none -vnc \
---- libvirt-1.0.6/tests/qemuxml2argvtest.c.orig 2013-06-16 15:44:25.855183409 +0200
-+++ libvirt-1.0.6/tests/qemuxml2argvtest.c 2013-06-16 15:45:12.908515760 +0200
-@@ -614,7 +614,7 @@
+diff -urp libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args
+--- libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-02-16 14:25:07.000000000 +0000
++++ libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-sasl.args 2016-03-18 12:15:39.783768000 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu \
+ -name QEMUGuest1 \
+diff -urp libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args
+--- libvirt-1.3.2.orig/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-02-16 14:25:07.000000000 +0000
++++ libvirt-1.3.2/tests/qemuargv2xmldata/qemuargv2xml-graphics-vnc-tls.args 2016-03-18 12:15:42.431768000 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu \
+ -name QEMUGuest1 \
+diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args
+--- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-01-10 01:57:37.000000000 +0000
++++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-sasl.args 2016-03-18 12:13:04.244768000 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=spice \
+ /usr/bin/qemu \
+ -name QEMUGuest1 \
+diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args
+--- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-02-16 14:25:07.000000000 +0000
++++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args 2016-03-18 12:12:18.798768000 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu \
+ -name QEMUGuest1 \
+diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args
+--- libvirt-1.3.2.orig/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-02-16 14:25:07.000000000 +0000
++++ libvirt-1.3.2/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args 2016-03-18 12:12:35.964768000 +0000
+@@ -3,7 +3,7 @@ PATH=/bin \
+ HOME=/home/test \
+ USER=test \
+ LOGNAME=test \
+-SASL_CONF_PATH=/root/.sasl2 \
++SASL_CONF_PATH=/root/.sasl \
+ QEMU_AUDIO_DRV=none \
+ /usr/bin/qemu \
+ -name QEMUGuest1 \
+diff -urp libvirt-1.3.2.orig/tests/qemuxml2argvtest.c libvirt-1.3.2/tests/qemuxml2argvtest.c
+--- libvirt-1.3.2.orig/tests/qemuxml2argvtest.c 2016-02-27 03:16:01.000000000 +0000
++++ libvirt-1.3.2/tests/qemuxml2argvtest.c 2016-03-18 12:11:24.793768000 +0000
+@@ -921,7 +921,7 @@ mymain(void)
driver.config->vncSASL = 1;
VIR_FREE(driver.config->vncSASLdir);
- ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl2"));
+ ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl"));
- DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC, QEMU_CAPS_VGA);
+ DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC);
driver.config->vncTLS = 1;
driver.config->vncTLSx509verify = 1;
+@@ -941,7 +941,7 @@ mymain(void)
+ QEMU_CAPS_DEVICE_QXL,
+ QEMU_CAPS_SPICE_FILE_XFER_DISABLE);
+ driver.config->spiceSASL = 1;
+- ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl2"));
++ ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl"));
+ DO_TEST("graphics-spice-sasl",
+ QEMU_CAPS_VGA_QXL,
+ QEMU_CAPS_SPICE,
TLD / packages / libvirt.git / blobdiff