# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
# config file for setting up hardwired (leased) serial line.
# This configuration uses chats with modem, so You have to have an inteligent
# modem (AT commands compatible).
# But You can monitor connection speed.
#
DEVICE=ppp0
CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.leased1
ONBOOT=yes
IPADDR=192.168.255.254/30
REMIP=192.168.255.253
HARDFLOWCTL=yes
MODEMPORT=/dev/ttyS1
LINESPEED=115200
DEBUG=no
PERSIST=yes
HOLDOFF=10
#demand option not finished yet ;-(
DEMAND=no
#ACTIVEFILTER=
#IDLE=
# one end is "calling"
INITSTRING="ATs0=0&l1"
# while other is "receiving"
#INITSTRING="ATs0=1&l1"
#if your modem doesn't support AT&L1 command try with ATD on one side 
#and ATA on the other. 
DATAFORCHAT="INITSTRING"

REPORTFILE=/var/log/ppp0.log