# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
# config file for setting up hardwired (leased) serial line.
# This config assumes "transparent" modem (in ex. goramo), null modem
# cable or current loop. 
# Advantage is smaller logfiles and slower 'pid spinning' (no chat is
# executed)
# You can configure Your AT Hayes compatibile modem to transparent mode
# using ATS0=0&L1&S5&W on master "calling" side and ATS0=1&L1&S5&W on
# slave "reciving" side 
# Note: After commiting last &W You won't be able to talk to Your modem 
# until You reset it to factory defaults using some jumper.
# if You don't have any jumper YOU HAVE BEEN WARNED. 
#
DEVICE=ppp0
ONBOOT=yes
IPADDR=192.168.255.254/30
REMIP=192.168.255.253
HARDFLOWCTL=yes
MODEMPORT=/dev/ttyS1
LINESPEED=115200
DEBUG=no
PERSIST=yes
HOLDOFF=10
#demand option not finished yet ;-(
DEMAND=no
#ACTIVEFILTER=
#IDLE=

REPORTFILE=/var/log/ppp0.log