--- /dev/null
+MAINTAINERS
+
+Maintainer of development version
+is Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+
+AUTHORS/CREDITS
+
+Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+ networking functions, iproute2 support,
+ national language support, scripts for
+ controling tunnels and bridges
+
+Artur Frysiak <wiget@pld-linux.org>
+ automake/autoconf support, bug fixes
+
+Bartosz Waszak <waszi@pld-linux.org>
+ fixes, devfsd support
+
+Grzegorz Stanislawski <stangrze@open.net.pl>
+ ppp scripts, prefix/netmask converting
+ functions, bug fixes
+
+Jan Rękorajski <baggins@pld-linux.org>
+ general, ipv6 and dhcp fixes
+
+Michał Kochanowicz <mkochano@pld-linux.org>
+ fixes, progress()
+
+Paweł Wilk <siefca@gnu.org>
+ executing scripts on iface up/down
+ timezone setup & resolvesymlink
+
+Robert Ślaski <robin@atm.com.pl>
+ ATM support
+
+Sebastian Zagrodzki <s.zagrodzki@mimuw.edu.pl>
+ many fixes
+
+Tomasz Kłoczko <kloczek@wun.zie.pg.gda.pl>
+ automake/autoconf updates, bug fixes
+
+Mandrake Software
+RedHat Software, Inc.
+
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- /dev/null
+ READ THIS BEFORE CHANGEING SOMETHING IN RC-SCRIPTS PACKAGE
+ Arkadiusz Miskiewicz <misiek@pld-linux.org>
+
+1)
+ consult all major changes with people on pld-rc-scripts@pld-linux.org
+mailing list. This is very important.
+
+2)
+ use 'local' for local variables in functions for example:
+
+function_ble ()
+{
+local qw er=0
+qw=$(tty)
+er=/dev/console
+echo "$qw $er"
+}
+
+3)
+ use $() instead `` for command execution for example
+
+something=$(whoami)
+instead of
+something="`whoami`"
+
+Warning! The following snippet will not work, use `` in such cases:
+There is one ')' too many there.
+
+interfaces_boot=$(
+ case $i in
+ *ifcfg-lo) continue ;;
+ esac
+)
+
+4) don't use sed ! It only causes one more Requires.
+ Use awk ' { gsub(/pattern/,"replaced"); print $0; } ' for that.
+ Also try to replace grep calls with awk calls.
+
+5)
+ (PL) Tlumaczac komunikaty na PL nalezy uzywac formy bezosobowej np:
+
+uruchamianie uslugi
+zamiast
+uruchamiam usluge
+
+
+
+HOW TO MAKE A RELEASE
+
+- git checkout master
+- git pull --rebase
+- ./autogen.sh
+- make distcheck
+- update configure.ac release and commit it
+- make dist
+- ./make-tag.sh
+- upload tarball to distfiles, update rc-scripts.spec:HEAD
--- /dev/null
+ !! First read README file !!
+
+Basic Installation
+==================
+
+ These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
--- /dev/null
+#
+#
+
+SUBDIRS = src lib ppp isapnp sysconfig rc.d doc man po
+
+sysconf_DATA = \
+ adjtime \
+ inittab \
+ modules \
+ crypttab \
+ sysctl.conf
+
+firmware_SCRIPTS = \
+ firmware-loader.sh
+
+profiledir = @sysconfdir@/profile.d
+
+profile_DATA = \
+ lang.sh \
+ lang.csh
+
+bin_SCRIPTS = run-parts.sh
+sbin_SCRIPTS = \
+ setsysfont \
+ hwprofile \
+ service
+
+AM_DISTCHECK_CONFIGURE_FLAGS = \
+ --prefix=/usr \
+ --verbose
+
+EXTRA_DIST = \
+ $(sysconf_DATA) \
+ $(profile_DATA) \
+ $(firmware_SCRIPTS) \
+ $(sbin_SCRIPTS) \
+ $(bin_SCRIPTS)
+
+install-data-hook:
+ install -d $(DESTDIR)$(localstatedir)/cache/$(PACKAGE)
+ [ -f $(DESTDIR)$(localstatedir)/cache/$(PACKAGE)/msg.cache ] || touch $(DESTDIR)$(localstatedir)/cache/$(PACKAGE)/msg.cache
+
+uninstall-hook:
+ [ -f $(DESTDIR)$(localstatedir)/cache/$(PACKAGE)/msg.cache ] && rm -f $(DESTDIR)$(localstatedir)/cache/$(PACKAGE)/msg.cache
+
+# make rpms
+rpm: $(PACKAGE).spec
+ $(MAKE) dist
+ rpmbin=`LC_ALL=C rpm -ta 2>&1 | grep -q "unknown option" && echo rpmbuild || echo rpm` ; \
+ $$rpmbin -ta --clean --rmsource $(PACKAGE)-$(VERSION).tar.gz
--- /dev/null
+Features of rc-scripts:
+
+- National Language Support; currently only english and polish
+ supported. Translators needed.
+- LDAP support (for interfaces database). NYF.
+- Full IPv6 support (including PPP).
+
+New in 0.3.0:
+
+- fourtun (v4 over v6) tunneling support.
+- support for more dhcp clients (dhcpcd, dhclient, dhcpxd, pump)
+- Logical Volume Manager (LVM) support.
+- /etc/sysctl.conf support.
+- queueing discipline support.
+- IPv6 boot method (v4compat).
+- bridge configuration support.
+- rc.modules scipt and /etc/modules config
+- new ifcfg- config syntax
+
+Note:
+NYF - not yet finished.
--- /dev/null
+rc-scripts is a derivative of the initscripts 3.78 release by
+RedHat Software, but with bugs removed and newer features added.
+
+To use rc-scripts you need packages such as: mktemp, modutils
+(at least 2.1.121), textutils, sh-utils, mawk (at least 1.3.3;
+other awk implementations are not tested), procps, sed, e2fsprogs,
+gettext.
+
+If you want to use networking with rc-scripts you need
+compile few features such as:
+
+Networking options --->
+ [*] Kernel/User netlink socket
+ [*] Routing messages
+
+into your kernel and install Alexey Kuznetsov iproute2 package.
+To use IPv6 networking you should compile:
+
+Networking options --->
+ <*/M> The IPv6 protocol (EXPERIMENTAL)
+ [*] IPv6: enable EUI-64 token format
+ [*] IPv6: disable provider based addresses
+
+too.
+
+Other required or suggested packages:
+
+| What? | Package |
++-------------+-------------------------------+
+ IPX ncfps
+ fourtun fourtun and kernel module
+ bridge bridge-utils
+ wireless wireless-tools
+ IrDA irda-utils
+ serial/ppp ppp, dip, wvdial
+ serial/slip slattach
+ PPPoE pppd + rp-pppoe (plugin or userspace program)
+
+Also you should know that format of interface configuration
+files is totally different from these used in RedHat/Mandrake
+initscripts and even from stable rc-scripts branch.
+
+If you have some bug reports or suggestions please send email
+to rc-scripts maintainers at <pld-rc-scripts@pld-linux.org> or
+use our Bug Tracking System ( http://bugs.pld-linux.org/ ).
+
+--
+PLD Linux Distribution rc-scripts Team
+
--- /dev/null
+Important:
+- don't set any flags automatically; always follow user
+ suggestion (multicast, arp)
+- merge baggins changes in atm-rc (added support for RFC1483/2684 Bridged
+ protocol)
+- killproc() sucks and has no consistency, error reporting
+ you'll never know which side of PROCNAME you should add the --waitforname or -SIGNAL args
+ because if you put -SIGNAL at wrong side of PROGNAME it will enter infinitive loop:
+ killproc -TERM --waitforname slapd --waitfortime 300 slapd
+ if you put --waitforname at wrong side, it will just ignore them:
+ killproc slapd -TERM --waitforname slapd --waitfortime 300
+ while correct would be:
+ killproc --waitforname slapd --waitfortime 300 slapd -TERM
+- switch to use __umount_*loop instead of own umount loop when stopping system
+- rc-scripts won't work if /dev/console is invalid (for example I made typo when configuring serial
+ console, console=ttys1,... instead of console=ttyS1) - rc.d/rc uses /dev/console a lot
+
+Other:
+- maybe merge ATM rc scripts
+
+We are waiting for suggestions.
--- /dev/null
+dnl DPKG_CACHED_TRY_COMPILE(<description>,<cachevar>,<include>,<program>,<ifyes>,<ifno>)
+AC_DEFUN([DPKG_CACHED_TRY_COMPILE],[
+ AC_MSG_CHECKING($1)
+ AC_CACHE_VAL($2,[
+ AC_TRY_COMPILE([$3],[$4],[$2=yes],[$2=no])
+ ])
+ if test "x$$2" = xyes; then
+ true
+ $5
+ else
+ true
+ $6
+ fi
+])
+
+dnl DPKG_C_GCC_ATTRIBUTE(<short-label>,<cachevar>,<func-params>,<attribute>,<HAVE>,<desc>,[<true-cmds>],[<false-cmds>])
+AC_DEFUN([DPKG_C_GCC_ATTRIBUTE],[
+ DPKG_CACHED_TRY_COMPILE(__attribute__(($1)),dpkg_cv_c_attribute_$2,,
+ [extern int testfunction($3) __attribute__(($4))],
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_GNUC25_$5,,$6)
+ $7,
+ AC_MSG_RESULT(no)
+ $8)
+])
+
+dnl DPKG_C_GCC_TRY_WARNS(<warnings>,<cachevar>)
+AC_DEFUN([DPKG_C_GCC_TRY_WARNS],[
+ AC_MSG_CHECKING([GCC warning flag(s) $1])
+ if test "${GCC-no}" = yes
+ then
+ AC_CACHE_VAL($2,[
+ if $CC $1 -c /dev/null 2>/dev/null; then
+ $2=yes
+ else
+ $2=
+ fi
+ ])
+ if test "x$$2" = xyes; then
+ CWARNS="${CWARNS} $1"
+ AC_MSG_RESULT(ok)
+ else
+ AC_MSG_RESULT(no)
+ fi
+ else
+ AC_MSG_RESULT(no, not using GCC)
+ fi
+])
+dnl DPKG_CACHED_TRY_COMPILE(<description>,<cachevar>,<include>,<program>,<ifyes>,<ifno>)
+
+
+dnl Check if a #define is present in an include file
+AC_DEFUN([DPKG_CHECK_DEFINE],
+ [AC_CACHE_CHECK(if $1 is defined in $2,
+ ac_cv_define_$1,
+ [AC_TRY_COMPILE([
+#include <$2>
+ ],[
+int i = $1;
+ ],
+ ac_cv_define_$1=yes,
+ ac_cv_define_$1=no)
+ ])
+ if test "$ac_cv_define_$1" = yes ; then
+ AC_DEFINE(HAVE_$1,,[define if $1 is defined])
+ fi
+])
+
--- /dev/null
+0.0 0 0.0
+0
--- /dev/null
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+PKG_NAME="PLD Linux Distribution rc-scripts"
+
+if [ -x ./changelog.sh ]; then
+ ./changelog.sh
+else
+ echo "Error: missing script changelog.sh to generate ChangeLog" >&2
+ exit 1
+fi
+
+cd "$srcdir"
+
+
+(test -f $srcdir/configure.ac \
+ && test -d $srcdir/src) || {
+ echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
+ echo " top-level rc-scripts directory"
+
+ exit 1
+}
+
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`autoconf' installed to compile $PKG_NAME."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+(grep "^AM_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) && {
+ (libtoolize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`libtool' installed to compile $PKG_NAME."
+ echo "Get ftp://alpha.gnu.org/gnu/libtool/libtool-1.4b.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ }
+}
+
+grep "^AM_GNU_GETTEXT" $srcdir/configure.ac >/dev/null && {
+ grep "sed.*POTFILES" $srcdir/configure.ac >/dev/null || \
+ (gettextize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`gettext' installed to compile $PKG_NAME."
+ echo "Get ftp://alpha.gnu.org/gnu/gettext-0.10.38.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ }
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`automake' installed to compile $PKG_NAME."
+ echo "Get ftp://sourceware.cygnus.com/pub/automake/automake-1.4-p4.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ NO_AUTOMAKE=yes
+}
+
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: Missing \`aclocal'. The version of \`automake'"
+ echo "installed doesn't appear recent enough."
+ echo "Get ftp://sourceware.cygnus.com/pub/automake/automake-1.4-p4.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+}
+
+if test "$DIE" -eq 1; then
+ exit 1
+fi
+
+if test -z "$*"; then
+ echo "**Warning**: I am going to run \`configure' with no arguments."
+ echo "If you wish to pass any to it, please specify them on the"
+ echo \`$0\'" command line."
+ echo
+fi
+
+case $CC in
+xlc )
+ am_opt=--include-deps;;
+esac
+
+for coin in `find $srcdir -name configure.ac -print`
+do
+ dr=`dirname $coin`
+ if test -f $dr/NO-AUTO-GEN; then
+ echo skipping $dr -- flagged as no auto-gen
+ else
+ echo processing $dr
+ macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < $coin`
+ ( cd $dr
+ aclocalinclude="$ACLOCAL_FLAGS"
+ for k in $macrodirs; do
+ if test -d $k; then
+ aclocalinclude="$aclocalinclude -I $k"
+ ##else
+ ## echo "**Warning**: No such directory \`$k'. Ignored."
+ fi
+ done
+ if grep "^AM_GNU_GETTEXT" configure.ac >/dev/null; then
+ if grep "sed.*POTFILES" configure.ac >/dev/null; then
+ : do nothing -- we still have an old unmodified configure.ac
+ else
+ echo "Creating $dr/aclocal.m4 ..."
+ test -r $dr/aclocal.m4 || touch $dr/aclocal.m4
+ echo "Running gettextize... Ignore non-fatal messages."
+ echo "no" | gettextize --force --copy
+ echo "Making $dr/aclocal.m4 writable ..."
+ test -r $dr/aclocal.m4 && chmod u+w $dr/aclocal.m4
+ fi
+ fi
+ if grep "^AM_PROG_LIBTOOL" configure.ac >/dev/null; then
+ echo "Running libtoolize..."
+ libtoolize --force --copy
+ fi
+ echo "Running aclocal $aclocalinclude ..."
+ aclocal $aclocalinclude
+ if grep "^A[CM]_CONFIG_HEADER" configure.ac >/dev/null; then
+ echo "Running autoheader..."
+ autoheader
+ fi
+ echo "Running autoconf ..."
+ autoconf
+ echo "Running automake --gnu $am_opt ..."
+ automake --add-missing --gnu $am_opt
+ )
+ fi
+done
+
+conf_flags="" #--enable-maintainer-mode --enable-compile-warnings --enable-iso-c
+
+if test x$NOCONFIGURE = x; then
+ echo Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile $PKG_NAME
+else
+ echo Skipping configure process.
+fi
--- /dev/null
+#!/bin/sh
+# Run this to generate ChangeLog.
+
+[ -e .git/shallow ] && git fetch --unshallow
+git log --format='%+ai [%h] %aN <%ae>%n%n%x09* %s' --stat | sed '1d' > ChangeLog
+
+# obfuscate emails <user@domain> and (user@domain)
+sed -i -e 's,\([<(].*\)@\(.*[)>]\),\1/at/\2,g' ChangeLog
--- /dev/null
+
+AC_INIT([rc-scripts], [0.4.14], [pld-rc-scripts@lists.pld-linux.org], [rc-scripts])
+AM_INIT_AUTOMAKE
+
+ALL_LINGUAS="pl de"
+
+echo -n "Finding shell scripts"
+SHSCRIPTS=""
+for shfile in $(find ${srcdir}/rc.d ${srcdir}/sysconfig ${srcdir}/lib ! -path "*/\.*/*" ! -name "*~" -type f); do
+ echo -n "."
+ if (LC_ALL=C file ${shfile} | grep -q 'shell script'); then
+ SHSCRIPTS="${SHSCRIPTS} ${shfile}"
+ fi
+done
+echo "done"
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_ISC_POSIX
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+
+pppdir='${sysconfdir}/ppp'
+sysconfigdir='${sysconfdir}/sysconfig'
+updir='${sysconfigdir}/interfaces/up.d'
+downdir='${sysconfigdir}/interfaces/down.d'
+networkscriptsdir='${exec_prefix}/lib/${PACKAGE}'
+rcdir='${sysconfdir}/rc.d'
+initdir='${sysconfdir}/init'
+firmwaredir='${exec_prefix}/lib/firmware'
+docdir="${prefix}/doc/${PACKAGE}-${VERSION}"
+
+dnl i18n support
+AC_PATH_PROGS(MSGMERGE, msgmerge)
+AC_PATH_PROGS(GMSGFMT, gmsgfmt msgfmt)
+
+if test -z "$MSGMERGE" || test -z "$GMSGFMT"; then
+ AC_MSG_ERROR(install gettext-devel to be able to regenerate translations)
+fi
+
+CATALOGS=
+POTFILES=
+for lang in $ALL_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ POTFILES="$POTFILES $lang.po"
+done
+
+POTSRC=
+for src in $SHSCRIPTS; do
+ POTSRC="$POTSRC \$(top_srcdir)/$src"
+done
+AC_ARG_WITH(localedir,
+ [ --with-localedir=PATH specify where the locale stuff should go ])
+
+if test "x$LOCALEDIR" = "x"; then
+ if test "x$with_localedir" != "x"; then
+ LOCALEDIR=$with_localedir
+ else
+ LOCALEDIR='$(prefix)/share/locale'
+ fi
+fi
+
+localedir=$LOCALEDIR
+gnulocaledir=$LOCALEDIR
+
+if test "`eval echo $sysconfdir`" = "NONE/etc"; then
+ defaultdir="/usr/local/etc"
+else
+ defaultdir="`eval echo $sysconfdir`"
+fi
+
+AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+if test "$PKG_CONFIG" = no; then
+ AC_MSG_ERROR(You need to install pkgconfig package)
+fi
+
+GLIBDIR=none
+AC_MSG_CHECKING([glib2])
+GLIB_LIBS="-Wl,-static `$PKG_CONFIG --libs --static glib-2.0` -Wl,-Bdynamic"
+GLIB_CFLAGS="`$PKG_CONFIG --cflags-only-I glib-2.0`"
+if test "x$GLIB_LIBS" = "x"; then
+ AC_MSG_ERROR(no)
+fi
+AC_MSG_RESULT(yes)
+
+DPKG_C_GCC_ATTRIBUTE([,,],supported,[int x],[,,],ATTRIB,[Define if function attributes a la GCC 2.5 and higher are available.],
+ DPKG_C_GCC_ATTRIBUTE(noreturn,noreturn,[int x],noreturn,NORETURN,[Define if nonreturning functions a la GCC 2.5 and higher are available.])
+ DPKG_C_GCC_ATTRIBUTE(const,const,[int x],const,CONST,[Define if constant functions a la GCC 2.5 and higher are available.])
+ DPKG_C_GCC_ATTRIBUTE(unused,unused,[int x],unused,UNUSED,[Define if unused variables la GCC 2.5 and higher are available.])
+ DPKG_C_GCC_ATTRIBUTE(format...,format,[char *y, ...],[format(printf,1,2)],PRINTFFORMAT,[Define if printf-format argument lists a la GCC are available.]))
+
+AC_CHECK_TYPE(ptrdiff_t,int)
+AC_CHECK_HEADERS([stddef.h sys/capability.h getopt.h])
+
+dnl Output
+AC_SUBST(BASHSCRIPTS)
+AC_SUBST(CATALOGS)
+AC_SUBST(POTFILES)
+AC_SUBST(POTSRC)
+AC_SUBST(localedir)
+AC_SUBST(gnulocaledir)
+
+AC_SUBST(pppdir)
+AC_SUBST(networkscriptsdir)
+AC_SUBST(sysconfigdir)
+AC_SUBST(updir)
+AC_SUBST(downdir)
+AC_SUBST(rcdir)
+AC_SUBST(initdir)
+AC_SUBST(docdir)
+AC_SUBST(firmwaredir)
+AC_SUBST(GLIB_LIBS)
+AC_SUBST(GLIB_CFLAGS)
+
+AH_BOTTOM([
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+
+/* Use the definitions: */
+
+/* The maximum length of a #! interpreter displayed by dpkg-deb. */
+#ifdef PATH_MAX
+#define INTERPRETER_MAX PATH_MAX
+#else
+#define INTERPRETER_MAX 1024
+#endif
+
+/* GNU C attributes. */
+#ifndef FUNCATTR
+#ifdef HAVE_GNUC25_ATTRIB
+#define FUNCATTR(x) __attribute__(x)
+#else
+#define FUNCATTR(x)
+#endif
+#endif
+
+/* GNU C printf formats, or null. */
+#ifndef ATTRPRINTF
+#ifdef HAVE_GNUC25_PRINTFFORMAT
+#define ATTRPRINTF(si,tc) format(printf,si,tc)
+#else
+#define ATTRPRINTF(si,tc)
+#endif
+#endif
+#ifndef PRINTFFORMAT
+#define PRINTFFORMAT(si,tc) FUNCATTR((ATTRPRINTF(si,tc)))
+#endif
+
+/* GNU C nonreturning functions, or null. */
+#ifndef ATTRNORETURN
+#ifdef HAVE_GNUC25_NORETURN
+#define ATTRNORETURN noreturn
+#else /* ! HAVE_GNUC25_NORETURN */
+#define ATTRNORETURN
+#endif /* HAVE_GNUC25_NORETURN */
+#endif /* ATTRNORETURN */
+
+#ifndef NONRETURNING
+#define NONRETURNING FUNCATTR((ATTRNORETURN))
+#endif /* NONRETURNING */
+
+/* Combination of both the above. */
+#ifndef NONRETURNPRINTFFORMAT
+#define NONRETURNPRINTFFORMAT(si,tc) FUNCATTR((ATTRPRINTF(si,tc),ATTRNORETURN))
+#endif
+
+/* GNU C constant functions, or null. */
+#ifndef ATTRCONST
+#ifdef HAVE_GNUC25_CONST
+#define ATTRCONST const
+#else
+#define ATTRCONST
+#endif
+#endif
+#ifndef CONSTANT
+#define CONSTANT FUNCATTR((ATTRCONST))
+#endif
+
+/* GNU C unused functions, or null. */
+#ifndef ATTRUNUSED
+#ifdef HAVE_GNUC25_UNUSED
+#define ATTRUNUSED
+#else
+#define ATTRUNUSED
+#endif
+#endif
+#ifndef UNUSED
+#define UNUSED FUNCATTR((ATTRUNUSED))
+#endif
+])
+
+AC_CONFIG_HEADERS(src/config.h)
+AC_CONFIG_FILES([Makefile \
+ src/Makefile \
+ lib/Makefile \
+ doc/Makefile \
+ man/Makefile \
+ man/de/Makefile \
+ man/es/Makefile \
+ man/fr/Makefile \
+ man/ja/Makefile \
+ man/ru/Makefile \
+ man/sv/Makefile \
+ ppp/Makefile \
+ isapnp/Makefile \
+ sysconfig/Makefile \
+ sysconfig/cpusets/Makefile \
+ sysconfig/hwprofiles/Makefile \
+ sysconfig/interfaces/Makefile \
+ sysconfig/interfaces/data/Makefile \
+ sysconfig/interfaces/up.d/Makefile \
+ sysconfig/interfaces/up.d/all/Makefile \
+ sysconfig/interfaces/up.d/ip/Makefile \
+ sysconfig/interfaces/up.d/ipx/Makefile \
+ sysconfig/interfaces/up.d/ppp/Makefile \
+ sysconfig/interfaces/up.d/tnl/Makefile \
+ sysconfig/interfaces/down.d/Makefile \
+ sysconfig/interfaces/down.d/all/Makefile \
+ sysconfig/interfaces/down.d/ip/Makefile \
+ sysconfig/interfaces/down.d/ipx/Makefile \
+ sysconfig/interfaces/down.d/ppp/Makefile \
+ sysconfig/interfaces/down.d/tnl/Makefile \
+ rc.d/Makefile rc.d/init.d/Makefile \
+ po/Makefile \
+ ])
+AC_OUTPUT
--- /dev/null
+# See crypttab(5) for this file format.
+#
+# NOTE: No options can be specified for LUKS encrypted partitions.
+
+# NAME DEVICE PASSWORD OPTIONS
+#hda1 /dev/hda1 none verify
+#hda1 /dev/hda1
--- /dev/null
+@SET_MAKE@
+
+docdir = @docdir@
+
+doc_DATA =
+noinst_DATA = \
+ template.init \
+ net-scripts.txt \
+ sysconfig.txt \
+ sysvinitfiles
+
+EXTRA_DIST = $(doc_DATA) $(noinst_DATA)
--- /dev/null
+#!/bin/sh
+
+jade -t sgml -d polski.dsl rc-scripts.docb
+#jade -t sgml -d polski.dsl test-ogonki.docb
--- /dev/null
+rc-scripts files:
+========================================
+
+/sbin/ifup:
+/sbin/ifdown:
+
+ These are the only two scripts "in" this directory that should
+ be called directly; these two scripts call all the other
+ scripts as needed.
+
+ These scripts take one argument normally: the name of the device
+ (e.g. eth0). They are called with a second argument of "boot"
+ during the boot sequence so that devices that are not meant to
+ be brought up on boot (ONBOOT=no, see below) can be ignored at
+ that time.
+
+/sbin/network-scripts/network-functions:
+
+ Not really a public file. Contains functions which the scripts use
+ for bringing interfaces up and down. In particular, it contains
+ most of the code for handling alternative interface configurations
+ and interface change notification through netreport.
+
+/lib/rc-scripts/ifup-post
+
+ Called when any network device EXCEPT a SLIP (with dip) device comes
+ up. Calls /lib/rc-scripts/ifup-routes to
+ bring up static routes that depend on that device. Calls
+ /sbin/network-scripts/ifup-aliases to bring up
+ aliases for that device. Sets the hostname if it is not
+ already set and a hostname can be found for the IP for that
+ device. Sends SIGIO to any programs that have requested
+ notification of network events.
+
+ Could be extended to fix up nameservice configuration, call
+ arbitrary scripts, etc, as needed.
+
+/lib/rc-scripts/ifup-routes
+
+ Set up static routes for a device.
+
+/lib/rc-scripts/ifup-aliases
+
+ Bring up aliases for a device.
+
+/lib/rc-scripts/ifdhcpc-done
+
+ Called by dhcpcd once dhcp configuration is complete; sets
+ up /etc/resolv.conf from the version dhcpcd dropped in
+ /etc/dhcpc/resolv.conf
+
+Files in /etc/sysconfig/interfaces/
+========================================
+
+/etc/sysconfig/interfaces/ifcfg-<interface-name> and
+/etc/sysconfig/interfaces/ifcfg-<interface-name>-<clone-name>:
+
+ The first defines an interface, and the second contains
+ only the parts of the definition that are different in a
+ "clone" (or alternative) interface. For example, the
+ network numbers might be different, but everything else
+ might be the same, so only the network numbers would be
+ in the clone file, but all the device information would
+ be in the base ifcfg file.
+
+ The items that can be defined in an ifcfg file depend on the
+ interface type. The really obvious ones I'm not going to
+ bother to define; you can figure out what "IPADDR" is, I
+ think... :-)
+
+ Base items:
+ DEVICE=<name of physical device (except dynamically-allocated PPP
+ devices where it is the "logical name")
+ IPADDR= IP_AOPTS= IP_ROPTS= IP_LABEL=
+ IPADDR1= IP_AOPTS1= IP_ROPTS1= IP_LABEL1=
+ IP_ADDRx= IP_AOPTSx= IP_ROPTSx= IP_LABELx=
+ IP4_PRIM_IF= IP4_SRC_IF=
+ IP6_PRIM_IF=
+ GATEWAY=
+ ONBOOT=yes|no
+ USERCTL=yes|no
+ BOOTPROTO=none|bootp|dhcp|pump|zeroconf|auto
+ ETHTOOL_OPTS=
+
+ If BOOTPROTO is not "none", then the only other item that
+ must be set is the DEVICE item; all the rest will be determined
+ by the boot protocol. No "dummy" entries need to be created.
+
+ Ethernet-only items:
+ {IPXNETNUM,IPXPRIMARY,IPXACTIVE}_{802_2,802_3,ETHERII,SNAP}
+ configuration matrix for IPX. Only used if IPX is active.
+ Managed from /lib/rc-scripts/ifup-ipx
+
+ Deprecated, but supported:
+ ETHTOOL_OPTS=...
+ Any device-specific options supported by ethtool. For example,
+ if you wanted to force 100Mb full duplex:
+ ETHTOOL_OPTS="speed 100 duplex full autoneg off"
+ Note that changing speed or duplex settings almost always
+ requires disabling autonegotiation with 'autoneg off'.
+
+ Long term, this should be done by sysadmin-written udev rules.
+
+ PPP/SLIP items:
+ PERSIST=yes|no
+ MODEMPORT=<device, say /dev/modem>
+ LINESPEED=<speed, say 115200>
+ DEFABORT=yes|no (tells netcfg whether or not to put default
+ abort strings in when creating/editing the chat script and/or
+ dip script for this interface)
+
+ PPP-specific items
+ DEFROUTE=yes|no (set this interface as default route?)
+ ESCAPECHARS=yes|no (simplified interface here doesn't let people
+ specify which characters to escape; almost everyone can use
+ asyncmap 00000000 anyway, and they can set PPPOPTIONS to
+ asyncmap foobar if they want to set options perfectly)
+ HARDFLOWCTL=yes|no (yes imples "modem crtscts" options)
+ PPPOPTIONS=<arbitrary option string; is placed last on the
+ command line, so it can override other options like asyncmap
+ that were specified differently>
+ PAPNAME=<"name $PAPNAME" on pppd command line> (note that
+ the "remotename" option is always specified as the logical
+ ppp device name, like "ppp0" (which might perhaps be the
+ physical device ppp1 if some other ppp device was brought
+ up earlier...), which makes it easy to manage pap/chap
+ files -- name/password pairs are associated with the
+ logical ppp device name so that they can be managed
+ together.
+
+ In principal, I'm not aware of anything that would keep
+ the logical PPP device names from being "worldnet" or
+ "myISP" instead of ppp0-pppN)
+ REMIP=<remote ip4 address, normally unspecified>
+ REMIP6=<remote ip6 address, normally unspecified>
+ MTU=
+ MRU=
+ DISCONNECTTIMEOUT=<number of seconds, default currently 5>
+ (time to wait before re-establishing the connection after
+ a successfully-connected session terminates before attempting
+ to establish a new connection.)
+ RETRYTIMEOUT=<number of seconds, default currently 60>
+ (time to wait before re-attempting to establish a connection
+ after a previous attempt fails.)
+ INITSCRIPT=<modem command>
+ string which initialises your modem. Usualy something like
+ AT&F0&C1&D2
+ (PLD Linux rc-scripts specific option)
+ DATAFORCHAT=<list of variables>
+ List of variables which should be exported to chat script.
+ Used mostly for passing USERNAME and PASSWORD into it. (see below)
+ (PLD Linux rc-scripts specific option)
+ PEERDNS=yes|no
+ IPV6_PPP=yes|no
+ use IPv6 for ppp
+ IPV6_CP_USEV4=yes|no
+ use local IPv4 mapped addresses as IPv6 addresses
+ IPV6_CP_PERSISTENT=yes|no
+ use EUI-48 addresses as IPv6 addresses
+ or by default use address specified by IP6_PRIM_IF and REMIP6
+ ENABLE_6TO4=yes|no
+ configure a 6to4 tunnel, if the interface has a public
+ (non-RFC1918) IPv4 address
+ <anything>=<anything>
+ Variable name and it's value for use by chat script.
+ Note: You don't have to define variables here, if they are defined
+ in parent process enviroment they will be used.
+ in.ex. USERNAME usualy is.
+
+ IPIP/GRE/SIT tunnel-specific items
+ REMOTEIP=<ip_addres>
+ address of the remote end of tunnel
+ LOCALIP=<ip_addres>
+ address of the local end of tunnel
+
+
+
+/etc/sysconfig/interfaces/ifcfg-<interface-name>-<anything>!:
+
+ Template or backup file. This will not be interpreted
+ by net-scripts.
+
+/etc/sysconfig/interfaces/data/chat-<interface-name>:
+
+ chat script for PPP or SLIP connection intended to establish
+ the connection. For SLIP devices, a DIP script is written
+ from the chat script; for PPP devices, the chat script is used
+ directly.
+ In PLD Linux version of rc-scripts, this file is parsed by shell
+ (actually by grep in firstplace to get rid of comments) before it
+ is passed to chat.
+ This allows you to substitute shell variables with their values
+ defined in <interface name> or more generally in current env.
+ If You wonder about purbose, imagine one chat-script for all links
+ at ISP's border router or computer in home where all users have own IPS's
+ accounts and want to pay only for themselfes.
+ Unfortunetly this parsing have impact on chat script syntax.
+ All characters that have special meaning for shell have to be escaped.
+
+
+/etc/sysconfig/interfaces/data/dip-<interface-name>
+
+ A write-only script created from the chat script by netcfg.
+ Do not modify this. In the future, this file may disappear
+ by default and created on-the-fly from the chat script if
+ it does not exist.
--- /dev/null
+<!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
+<!ENTITY dbstyle SYSTEM "/usr/share/sgml/dsssl/docbook/html/docbook.dsl" CDATA DSSSL>
+]>
+
+<style-sheet>
+
+ <style-specification use="docbook">
+ <style-specification-body>
+
+ ;;(define nochunks #t)
+ (define %no-make-index #t)
+ (define %generate-book-titlepage% #t)
+ (define %generate-book-toc% #t)
+ (define %generate-book-toc-on-titlepage% #f)
+ (define %generate-reference-toc% #f)
+ (define %generate-reference-toc-on-titlepage% #f)
+ (define %generate-reference-titlepage% #f)
+ (define %generate-chapter-toc% #f)
+ (define %generate-partintro-on-titlepage% #f)
+ ;;(define %generate--toc% #t)
+ (define %use-id-as-filename% #t)
+ (define %chapter-autolabel% #f)
+ (define %section-autolabel% #f)
+ (define %html-ext% ".html")
+ (define %gentext-nav-use-ff% #t)
+ (define %gentext-nav-use-tables% #t)
+ (define %force-chapter-toc% #f)
+ (define %gentext-nav-tblwidth% "100%")
+ (define %shade-verbatim% #t)
+ (define %annotate-toc% #t)
+ (define %html-pubid% "-//W3C//DTD HTML 4.0 Transitional//EN")
+ ;;(define %link-mailto-url% "mailto:ziembor@faq-bot.ziembor.waw.pl")
+ (define %stylesheet-type% "text/css")
+ (define %stylesheet% "pcwfaq.css")
+ (define %body-attr% (list (list "BGCOLOR" "#FFFFFF") (list "TEXT" "#000000")))
+ ;;(define %titlepage-in-info-order% #t)
+ (define %html-header-tags% '(("META" ("NAME" "description") ("CONTENT" "taki sobie
+ teścik"))
+ ("META" ("HTTP-EQUIV" "content-type") ("content" "text/html; charset=UTF-8"))))
+ (define %spacing-paras% #f)
+
+ </style-specification-body>
+ </style-specification>
+
+ <external-specification id="docbook" document="dbstyle">
+</style-sheet>
+
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: sgml
+sgml-omittag:nil
+sgml-shorttag:nil
+sgml-minimize-attributes:nil
+sgml-always-quote-attributes:t
+sgml-parent-document:nil
+sgml-default-dtd-file:nil
+sgml-exposed-tags:nil
+sgml-local-catalogs:nil
+sgml-local-ecat-files:nil
+sgml-declaration:nil
+sgml-validate-command:"nsgmls -s %s %s"
+End:
+-->
--- /dev/null
+<!DOCTYPE BOOK PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
+<!--ArborText, Inc., 1988-1995, v.4001-->
+<!--NOTATION drw SYSTEM "DRW"-->
+<!ENTITY sysconfig SYSTEM "sysconfig.docb">
+<!ENTITY netscripts SYSTEM "netscripts.docb">
+]>
+
+<!-- To jest przykładowy dokument główny włączający sysconfig.docb -->
+
+<book lang="pl">
+ <bookinfo>
+ <date>1998.10.19</date>
+ <title>tytuł</title>
+ <subtitle>podtytuł</subtitle>
+ </bookinfo>
+
+ <reference id=pld-pakiety>
+ <title>Opisy pakietów</title>
+ <partintro>
+ <para>Opisy pakietów specyficznych dla PLD</para>
+ </partintro>
+
+
+ &sysconfig;
+ <!-- &netscripts;-->
+</reference>
+</book>
+
+<!--To dla emacsa: -->
+<!--
+Local Variables:
+mode: sgml
+End:
+-->
+
--- /dev/null
+<refentry>
+ <refnamediv>
+ <refname>/etc/sysconfig/</refname>
+ <refpurpose>Basic system settings</refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title><filename moreinfo="None">/etc/sysconfig/keyboard</filename></title>
+ <variablelist>
+ <varlistentry>
+ <term>KEYTABLE=<keytable file></term>
+ <listitem><para>for example:
+ KEYTABLE="/usr/lib/kbd/keytables/us.map"</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename moreinfo="None">/etc/sysconfig/mouse</filename></title>
+ <variablelist>
+ <varlistentry>
+ <term>MOUSETYPE=microsoft|mouseman|mousesystems|ps/2|msbm|logibm|atibm|
+ logitech|mmseries|mmhittab</term>
+ <listitem><para> </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>XEMU3=yes|no</term>
+ <listitem><para>(emulate three buttons with two buttons whenever
+ necessary, most notably in X)</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>In addition, /dev/mouse points to the mouse device.</para>
+ </refsect1>
+ <refsect1>
+ <title><filename moreinfo="None">/etc/sysconfig/network</filename></title>
+ <variablelist>
+ <varlistentry><term>NETWORKING=yes|no</term>
+ <listitem><para>IPV6NETWORKING=yes|no</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry><term>HOSTNAME=$<whatever hostname you want></term>
+ <listitem><note><para> for compatibility with some old software people might
+ install (like trn), the /etc/HOSTNAME file should contain the
+ same value as here.</para></note>
+ </listitem>
+ </varlistentry>
+ <varlistentry><term>IGNORE_ICMP_BCAST_IPV4=yes|no</term>
+ <listitem><para>(Please note that if you accept ICMP echo
+ requests with a broadcast/multicast destination address your network
+ may be used as an exploder for denial of service packet flooding attacks
+ to other hosts.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>SPOOFING_IPV4=yes|no</term>
+ <listitem>
+ <para>(anti spoofing protection)</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>GATEWAY=<gateway IP></term>
+ <listitem>
+ <para>
+ </para>
+
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>GATEWAYDEV=<gateway device></term>
+ <listitem>
+ <para>
+ (e.g. eth0)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>NISDOMAIN=<nis domain name></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>IPX=yes|no</term>
+ <listitem>
+ <para>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>IPXAUTOPRIMARY=on|off</term>
+ <listitem>
+ <para>
+ (note, that MUST be on|off, not yes|no)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>IPXAUTOFRAME=on|off</term>
+ <listitem>
+ <para>
+ (again, not yes|no)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>IPXINTERNALNETNUM=<netnum></term>
+ <listitem>
+ <para>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>IPXINTERNALNODENUM=<nodenum></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>All the IPX stuff is optional, and should default to off.</para>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/static-nat</filename></title>
+ <para>
+ Configuration file for static Network Address Translation (NAT).
+ Contains lines of the form:</para>
+ <para>
+<literal><address> via <addressreal></literal></para>
+ <para>
+ NAT will translate address <address> to <addressreal>.</para>
+ </refsect1>
+ <refsect1>
+ <title><filename>/etc/sysconfig/static-routes</filename></title>
+ <para>Contains lines of the form:</para>
+ <para><literal><device> to [type] <network>/<prefix> via <gateway></literal></para>
+ <para><device> may be a device name to have the route brought up and
+ down with the device, or "none" if the route is not to be bound to any specific
+ device. [type] is optional. RH style isn't supported !</para>
+ <para>Also you can set few options after "<gateway>":</para>
+ <simplelist columns=1>
+ <member>tos <tos></member>
+ <member>metric <number></member>
+ <member>table <table></member>
+ <member>src <address></member>
+ <member>realm <realmid></member>
+ <member>mtu <mtu> or mtu lock <mtu></member>
+ <member>window <number></member>
+ <member>rtt <number></member>
+ <member>nexthop <nexthop></member>
+ <member>scope <scope></member>
+ <member>protocol <rtproto></member>
+ <member>onlink</member>
+ <member>equalize</member>
+ </simplelist>
+
+ <para>For more informations see iproute2 documentation .</para>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/static-routes6</filename></title>
+ <para>Same as <filename>/etc/sysconfig/static-routes</filename> but
+ for IPv6.</para>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/routed</filename></title>
+ <simplelist>
+ <member>SILENT=yes|no</member>
+ <member>EXPORT_GATEWAY=yes|no</member>
+ </simplelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/pcmcia</filename></title>
+ <simplelist>
+ <member>PCMCIA=yes|no</member>
+ <member>PCIC=i82365|tcic</member>
+ <member>PCIC_OPTS=<socket driver (i82365 or tcic) timing parameters></member>
+ <member>CORE_OPTS=<pcmcia_core options></member>
+ <member>CARDMGR_OPTS=<cardmgr options></member>
+ </simplelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/amd</filename></title>
+ <variablelist>
+ <varlistentry><term>ADIR=/.automount</term>
+ <listitem><para>(normally never changed)</para></listitem>
+ </varlistentry>
+ <varlistentry><term>MOUNTPTS='/net /etc/amd.conf'</term>
+ <listitem><para>(standard automount stuff)</para></listitem>
+ </varlistentry>
+ <varlistentry><term>AMDOPTS=</term>
+ <listitem><para>(extra options for AMD)</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename moreinfo="None">/etc/sysconfig/tape</filename></title>
+ <variablelist>
+ <varlistentry><term>DEV=/dev/nst0</term>
+ <listitem>
+ <para>
+ Tape device. Use the non-rewinding one for these scripts.</para>
+ <para>
+ For SCSI tapes this is /dev/nst#, where # is the number of the
+ tape drive you want to use. If you only have one then use
+ nst0.</para>
+ <para>
+ For IDE tapes you use /dev/ht#, where # is the number of the tape
+ drive you want to use (usually ht0).</para>
+ <para>
+ For floppy tape drives use /dev/ftape.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ADMIN=root</term>
+ <listitem><para>Person to mail to if the backup fails for any reason</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>SLEEP=5</term>
+ <listitem>
+<para>
+ Time to sleep between tape operations. Some drives need a bit
+ more than others, but 5 seems to work for 8mm, 4mm, and DLT</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>BLOCKSIZE=32768</term>
+ <listitem>
+ <para>
+ This worked fine for 8mm, then 4mm, and now DLT. An optimal
+ setting is probably however much data your drive writes at one
+ time.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>SHORTDATE=$(date +%y:%m:%d:%H:%M)</term>
+ <listitem>
+ <para>
+ A short date string, used in backup log filenames.</para>
+ </listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>DAY=$(date +log-%y:%m:%d)</term>
+ <listitem>
+ <para>
+ This is used for the log file directory.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>DATE=$(date)</term>
+ <listitem>
+ <para>
+ Regular date string, used in log files.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>LOGROOT=/var/log/backup</term>
+ <listitem>
+ <para>
+ Root of the logging directory</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>LIST=$LOGROOT/incremental-list</term>
+ <listitem>
+ <para>
+ This is the file name the incremental backup will use to store
+ the incremental list. It will be $LIST-{some number}.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>DOTCOUNT=$LOGROOT/.count</term>
+ <listitem>
+ <para>
+ For counting as you go to know which incremental list to use
+ </para>
+ </listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>COUNTER=$LOGROOT/counter-file</term>
+ <listitem>
+ <para>
+ For rewinding when done...might not use.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>BACKUPTAB=/etc/backuptab</term>
+ <listitem>
+ <para>
+ The file in which we keep our list of backup(s) we want to make.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/sendmail</filename></title>
+ <variablelist>
+ <varlistentry>
+ <term>DAEMON=yes|no</term>
+ <listitem>
+ <para>yes implies -bd</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>QUEUE=1h</term>
+ <listitem>
+ <para>given to sendmail as -q$QUEUE
+ -q option is not given to sendmail if /etc/sysconfig/sendmail
+ exists and QUEUE is empty or undefined.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/i18n</filename></title>
+ <simplelist>
+ <member>LANG= can be any two letter ISO language code</member>
+ <member>
+ LC_ALL= is the setting of the localedata configuration (eg fr_CA)</member>
+ <member>
+ LINGUAS= can be a : separated list of language codes</member>
+ <member>
+ SYSTERM= use to set default TERM environment variable</member>
+ </simplelist>
+ <para>
+ The above three variables are used in rc.sysinit.</para>
+ <variablelist>
+ <varlistentry>
+ <term>SYSFONT= any font that is legal when used as</term>
+ <listitem>
+ <para> /usr/sbin/setfont $SYSFONT ...
+ (See kbd package for sysfont command)
+</para> </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>UNIMAP= any unicode font that is legal fodder for</term>
+ <listitem>
+ <para>/usr/sbin/setfont $SYSFONT-u $UNIMAP</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>
+ The above is used by the /sbin/setsysfont command (which is run
+ by rc.sysinit at boot time).
+ </para>
+ </refsect1>
+
+ <refsect1>
+ <title><filename>/etc/sysconfig/\<service\></filename></title>
+ <para>
+ The following are used when starting service.
+ </para>
+ <variablelist>
+ <varlistentry>
+ <term>SERVICE_LIMITS="-u unlimited -c 0"</term>
+ <listitem>
+ <para>
+ System limits for this service.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>SERVICE_CPUSET="name"</term>
+ <listitem>
+ <para>
+ CPUSET to run this service in.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>SERVICE_UMASK="022"</term>
+ <listitem>
+ <para>
+ File creation mask for this service.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>SERVICE_RUN_NICE_LEVEL="0"</term>
+ <listitem>
+ <para>
+ Scheduling priority for this service.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
+
+
+
+
+<!-- to są informacje dla emacsa -->
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: sgml
+sgml-omittag:nil
+sgml-shorttag:nil
+sgml-minimize-attributes:nil
+sgml-always-quote-attributes:t
+sgml-indent-step:2
+sgml-indent-data:t
+sgml-parent-document:"rc-scripts.docb"
+sgml-default-dtd-file:nil
+sgml-exposed-tags:nil
+sgml-local-catalogs:nil
+sgml-local-ecat-files:nil
+sgml-declaration:nil
+sgml-validate-command:"nsgmls -s %s %s"
+End:
+-->
+
--- /dev/null
+Files in /etc/sysconfig
+=======================
+
+/etc/sysconfig/system:
+
+ AUTOSWAP=yes|no
+ Set to 'yes' to enable automatic swapon of all partitions with
+ the proper swap magic. This allows setting up swap without editing
+ /etc/fstab.
+
+/etc/sysconfig/keyboard:
+
+ KEYTABLE=<keytable file>
+ for example: KEYTABLE="/usr/lib/kbd/keytables/us.map"
+
+/etc/sysconfig/mouse:
+
+ MOUSETYPE=microsoft|mouseman|mousesystems|ps/2|msbm|logibm|atibm|
+ logitech|mmseries|mmhittab
+ XEMU3=yes|no (emulate three buttons with two buttons whenever
+ necessary, most notably in X)
+
+ In addition, /dev/mouse points to the mouse device.
+
+/etc/sysconfig/network:
+
+ NETWORKING=yes|no
+ IPV4_NETWORKING=yes|no
+ IPV6_NETWORKING=yes|no
+ HOSTNAME=<whatever hostname you want, e.g. "pldmachine">
+ Note: for compatibility with some old software people might
+ install (like trn), the /etc/HOSTNAME file should contain the
+ same value as here.
+ NISDOMAIN=<nis domain name, e.g. "mydomain.org">
+ Note: set this only if you use NIS system. DNS domainname
+ should be set in /etc/resolv.conf
+ IGNORE_ICMP_BCAST_IPV4=yes|no (Please note that if you accept ICMP echo
+ requests with a broadcast/multicast destination address your network
+ may be used as an exploder for denial of service packet flooding attacks
+ to other hosts.
+ SPOOFING_IPV4=yes|no (anti spoofing protection)
+ GATEWAY=<gateway IP>
+ GATEWAYDEV=<gateway device> (e.g. eth0)
+ IPX=yes|no
+ IPXAUTOPRIMARY=on|off (note, that MUST be on|off, not yes|no)
+ IPXAUTOFRAME=on|off (again, not yes|no)
+ IPXINTERNALNETNUM=<netnum>
+ IPXINTERNALNODENUM=<nodenum>
+
+ All the IPX stuff is optional, and should default to off.
+
+/etc/sysconfig/static-nat
+
+ Configuration file for static Network Address Translation (NAT).
+ Contains lines of the form:
+
+ <address> via <addressreal>
+
+ NAT will translate address <address> to <addressreal>.
+
+/etc/sysconfig/static-routes:
+
+ Contains lines of the form:
+
+ <device> to [type] <network>/<prefix> via <gateway>
+
+ <device> may be a device name to have the route brought up and
+ down with the device, or "any" to have the correct devices calculated
+ at run time. [type] is optional. RH style isn't supported!
+
+ Also you can set few options after "<gateway>":
+ tos <tos>
+ metric <number>
+ table <table>
+ src <address>
+ realm <realmid>
+ mtu <mtu> or mtu lock <mtu>
+ window <number>
+ rtt <number>
+ nexthop <nexthop>
+ scope <scope>
+ protocol <rtproto>
+ onlink
+ equalize
+ For more informations see iproute2 documentation.
+
+/etc/sysconfig/static-routes6:
+
+ Same as /etc/sysconfig/static-routes but for IPv6.
+
+/etc/sysconfig/routed:
+
+ SILENT=yes|no
+ EXPORT_GATEWAY=yes|no
+
+/etc/sysconfig/pcmcia:
+
+ PCMCIA=yes|no
+ PCIC=i82365|tcic
+ PCIC_OPTS=<socket driver (i82365 or tcic) timing parameters>
+ CORE_OPTS=<pcmcia_core options>
+ CARDMGR_OPTS=<cardmgr options>
+
+/etc/sysconfig/amd:
+
+ ADIR=/.automount (normally never changed)
+ MOUNTPTS='/net /etc/amd.conf' (standard automount stuff)
+ AMDOPTS= (extra options for AMD)
+
+/etc/sysconfig/tape:
+
+ DEV=/dev/nst0
+ Tape device. Use the non-rewinding one for these scripts.
+
+ For SCSI tapes this is /dev/nst#, where # is the number of the
+ tape drive you want to use. If you only have one then use
+ nst0.
+
+ For IDE tapes you use /dev/ht#, where # is the number of the tape
+ drive you want to use (usually ht0).
+
+ For floppy tape drives use /dev/ftape.
+
+ ADMIN=root
+ Person to mail to if the backup fails for any reason
+
+ SLEEP=5
+ Time to sleep between tape operations. Some drives need a bit
+ more than others, but 5 seems to work for 8mm, 4mm, and DLT
+
+ BLOCKSIZE=32768
+ This worked fine for 8mm, then 4mm, and now DLT. An optimal
+ setting is probably however much data your drive writes at one
+ time.
+
+ SHORTDATE=$(date +%y:%m:%d:%H:%M)
+ A short date string, used in backup log filenames.
+
+ DAY=$(date +log-%y:%m:%d)
+ This is used for the log file directory.
+
+ DATE=$(date)
+ Regular date string, used in log files.
+
+ LOGROOT=/var/log/backup
+ Root of the logging directory
+
+ LIST=$LOGROOT/incremental-list
+ This is the file name the incremental backup will use to store
+ the incremental list. It will be $LIST-{some number}.
+
+ DOTCOUNT=$LOGROOT/.count
+ For counting as you go to know which incremental list to use
+
+ COUNTER=$LOGROOT/counter-file
+ For rewinding when done...might not use.
+
+ BACKUPTAB=/etc/backuptab
+ The file in which we keep our list of backup(s) we want to make.
+
+/etc/sysconfig/sendmail:
+ DAEMON=yes|no
+ yes implies -bd
+ QUEUE=1h
+ given to sendmail as -q$QUEUE
+ -q option is not given to sendmail if /etc/sysconfig/sendmail
+ exists and QUEUE is empty or undefined.
+
+/etc/sysconfig/i18n
+
+ LANG= is the default setting of localedata configuration
+ (ISO-639-1 language code with ISO-3166-1 country code and optional
+ variant and/or encoding, eg. fr_CA, fr_CA.UTF-8);
+ LC_CTYPE=, LC_COLLATE=, LC_MESSAGES=, LC_NUMERIC=, LC_MONETARY=, LC_TIME=
+ are the individual category settings
+ LC_ALL= overrides all of the above LC_*
+ LANGUAGE= can be a : separated list of language codes
+ see locale(7) for details
+ SYSTERM= use to set default TERM environment variable
+
+ The above variables are used in rc.sysinit.
+
+ SYSFONT= any font that is legal when used as
+ /usr/sbin/setfont $SYSFONT ...
+ (See kbd package for sysfont command)
+
+ UNIMAP= any unicode font that is legal fodder for
+ /usr/sbin/setfont $SYSFONT-u $UNIMAP
+
+ The above is used by the /sbin/setsysfont command (which is run
+ by rc.sysinit at boot time).
+
+/etc/sysconfig/<service>
+
+ The following are used when starting service.
+
+ SERVICE_LIMITS="-u unlimited -c 0"
+ System limits for this service.
+
+ SERVICE_CPUSET="name"
+ CPUSET to run this service in.
+
+ SERVICE_UMASK="022"
+ File creation mask for this service.
+
+ SERVICE_RUN_NICE_LEVEL="0"
+ Scheduling priority for this service.
--- /dev/null
+Writing System V init scripts for PLD Linux
+===============================================
+
+All System V init scripts are named /etc/rc.d/init.d/<servicename>
+where <servicename> is the name of the service. There must be no
+".init" suffix.
+
+
+Sample Script
+=============
+
+#!/bin/sh
+#
+# /etc/rc.d/init.d/<servicename>
+#
+# <description of the *service*>
+# <any general comments about this init script>
+#
+# <tags -- see below for tag definitions. *Every line* from the top
+# of the file to the end of the tags section must begin with a #
+# character. After the tags section, there should be a blank line.
+# This keeps normal comments in the rest of the file from being
+# mistaken for tags, should they happen to fit the pattern.>
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Running service -- nice level.
+if [ -f /etc/sysconfig/<service> ]; then
+ . /etc/sysconfig/<service>
+fi
+
+<define any local shell functions used by the code that follows>
+
+case "$1" in
+ start)
+ show Starting <servicename> services
+ <start daemons, perhaps with the daemon function>
+ touch /var/lock/subsys/<servicename>
+ ;;
+ stop)
+ show Shutting down <servicename> services
+ <stop daemons, perhaps with the killproc function>
+ rm -f /var/lock/subsys/<servicename>
+ ;;
+ status)
+ <report the status of the daemons in free-form format,
+ perhaps with the status function>
+ ;;
+ restart)
+ <restart the daemons, normally with $0 stop; $0 start>
+ ;;
+ reload)
+ <cause the service configuration to be reread, either with
+ kill -HUP or by restarting the daemons, possibly with
+ $0 stop; $0 start>
+ ;;
+ probe)
+ <optional. If it exists, then it should determine whether
+ or not the service needs to be restarted or reloaded (or
+ whatever) in order to activate any changes in the configuration
+ scripts. It should print out a list of commands to give to
+ $0; see the description under the probe tag below.>
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|reload|restart[|probe]"
+ exit 1
+ ;;
+esac
+
+
+Notes: the restart and reload functions may be (and commonly are)
+combined into one test, vis:
+ restart|reload)
+You are not prohibited from adding other commands; list all commands
+which you intend to be used interactively to the usage message.
+
+
+
+Functions in /etc/rc.d/init.d/functions
+=======================================
+
+daemon [+/-nicelevel] program [arguments] [&]
+
+ Obsoletes starts a daemon, if it is not already running.
+ Does other useful things like keeping the daemon from
+ dumping core if it terminates unexpectedly.
+
+killproc program [signal]
+
+ Sends a signal to the program; by default it sends a SIGTERM,
+ and if the process doesn't die, it sends a SIGKILL a few
+ seconds later.
+
+ It also tries to remove the pidfile, if it finds one.
+
+pidofproc program
+
+ Tries to find the pid of a program; checking likely pidfiles,
+ using the pidof program, or even using ps. Used mainly from
+ within other functions in this file, but also available to
+ scripts.
+
+status program
+
+ Prints status information. Assumes that the program name is
+ the same as the servicename.
+
+
+Tags
+====
+
+# chkconfig: <startlevellist> <startpriority> <endpriority>
+
+ Required. <startlevellist> is a list of levels in which
+ the service should be started by default. <startpriority>
+ and <endpriority> are priority numbers. For example:
+ # chkconfig: 2345 20 80
+ Read 'man chkconfig' for more information.
+
+ Unless there is a VERY GOOD, EXPLICIT reason to the
+ contrary, the <endpriority> should be equal to
+ 100 - <startpriority>
+
+# description: <multi-line description of service>
+
+ Required. Several lines of description, continued with '\'
+ characters. The initial comment and following whitespace
+ on the following lines is ignored.
+
+# description[ln]: <multi-line description of service in the language \
+# ln, whatever that is>
+
+ Optional. Should be the description translated into the
+ specified language.
+
+# processname:
+
+ Optional, multiple entries allowed. For each process name
+ started by the script, there should be a processname entry.
+ For example, the samba service starts two daemons:
+ # processname: smdb
+ # processname: nmdb
+
+# config:
+
+ Optional, multiple entries allowed. For each static config
+ file used by the daemon, use a single entry. For example:
+ # config: /etc/httpd/httpd.conf
+ # config: /etc/httpd/srm.conf
+
+ Optionally, if the server will automatically reload the config
+ file if it is changed, you can append the word "autoreload" to
+ the line:
+ # config: /etc/foobar.conf autoreload
+
+# pidfile:
+
+ Optional, multiple entries allowed. Use just like the config
+ entry, except that it points at pidfiles. It is assumed that
+ the pidfiles are only updated at process creation time, and
+ not later. The first line of this file should be the ASCII
+ representation of the PID; a terminating newline is optional.
+ Any lines other than the first line are not examined.
+
+# probe: true
+
+ Optional, used IN PLACE of processname, config, and pidfile.
+ If it exists, then a proper reload-if-necessary cycle may be
+ acheived by running these commands:
+
+ command=$(/etc/rd.d/init.d/SCRIPT probe)
+ [ -n "$command" ] && /etc/rc.d/init.d/SCRIPT $command
+
+ where SCRIPT is the name of the service's sysv init script.
+
+ Scripts that need to do complex processing could, as an
+ example, return "run /var/tmp/<servicename.probe.$$"
+ and implement a "run" command which would execute the
+ named script and then remove it.
+
+ Note that the probe command should simply "exit 0" if nothing
+ needs to be done to bring the service into sync with its
+ configuration files.
+
+Copyright (c) 1998 Red Hat Software, Inc.
+Modified Corrected & Overlocked by PLD Linux (r) Team 1999.
--- /dev/null
+#!/bin/sh
+#
+# <service> <service> short service description
+#
+# chkconfig: 345 <start_level> <stop_level>
+#
+# description: <service> long service description
+#
+# processname: <procname>
+# config:
+# pidfile:
+#
+
+# Source function library
+. /etc/rc.d/init.d/functions
+
+# Get network config
+. /etc/sysconfig/network
+
+# Check that networking is up.
+if is_yes "${NETWORKING}"; then
+ if [ ! -f /var/lock/subsys/network -a "$1" != stop -a "$1" != status ]; then
+ msg_network_down "<service_name>"
+ exit 1
+ fi
+else
+ exit 0
+fi
+
+# Set defaults
+OPTION1="" # Strings
+OPTION2="-q" #
+OPTION3= # Values
+OPTION4=5 #
+
+# Get service config - may override defaults
+[ -f /etc/sysconfig/<service> ] && . /etc/sysconfig/<service>
+
+pidfile="/var/run/<service>.pid"
+
+# configtest itself
+# must return non-zero if check failed
+# output is discarded if checkconfig is ran without details
+configtest() {
+ /usr/sbin/<service> -t
+ return $?
+}
+
+# wrapper for configtest
+checkconfig() {
+ local details=${1:-0}
+
+ if [ $details = 1 ]; then
+ # run config test and display report (status action)
+ show "Checking %s configuration" "<service_name>"; busy
+ local out
+ out=$(configtest 2>&1)
+ RETVAL=$?
+ if [ $RETVAL = 0 ]; then
+ ok
+ else
+ fail
+ fi
+ [ "$out" ] && echo >&2 "$out"
+ else
+ # run config test and abort with nice message if failed
+ # (for actions checking status before action).
+ configtest >/dev/null 2>&1
+ RETVAL=$?
+ if [ $RETVAL != 0 ]; then
+ show "Checking %s configuration" "<service_name>"; fail
+ nls 'Configuration test failed. See details with %s "checkconfig"' $0
+ exit $RETVAL
+ fi
+ fi
+}
+
+start() {
+ # Check if the service is already running?
+ if [ -f /var/lock/subsys/<service> ]; then
+ msg_already_running "<service_name>"
+ return
+ fi
+
+ checkconfig
+ msg_starting "<service_name>"
+ daemon /usr/sbin/<service>
+ RETVAL=$?
+ [ $RETVAL -eq 0 ] && touch /var/lock/subsys/<service>
+}
+
+stop() {
+ if [ ! -f /var/lock/subsys/<service> ]; then
+ msg_not_running "<service_name>"
+ return
+ fi
+
+ # Stop daemons.
+ msg_stopping "<service_name>"
+ killproc <procname>
+ killproc --pidfile $pidfile <procname> -TERM
+ rm -f /var/lock/subsys/<service>
+}
+
+reload() {
+ if [ ! -f /var/lock/subsys/<service> ]; then
+ msg_not_running "<service_name>"
+ RETVAL=7
+ return
+ fi
+
+ checkconfig
+ msg_reloading "<service_name>"
+ killproc <procname> -HUP
+ killproc --pidfile $pidfile <procname> -HUP
+ RETVAL=$?
+}
+
+condrestart() {
+ if [ ! -f /var/lock/subsys/<service> ]; then
+ msg_not_running "<service_name>"
+ RETVAL=$1
+ return
+ fi
+
+ checkconfig
+ stop
+ start
+}
+
+RETVAL=0
+# See how we were called.
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart)
+ checkconfig
+ stop
+ start
+ ;;
+ try-restart)
+ condrestart 0
+ ;;
+# include force-reload here if program allows reloading without restart
+# otherwise remove reload action and support force-reload as restart if running
+ reload|force-reload)
+ reload
+ ;;
+# use this one if program doesn't support reloading without restart
+ force-reload)
+ condrestart 7
+ ;;
+ checkconfig|configtest)
+ checkconfig 1
+ ;;
+ status)
+ status <service>
+ status --pidfile $pidfile <service>
+ status --pidfile $pidfile <service> <procname>
+ RETVAL=$?
+ ;;
+ *)
+ msg_usage "$0 {start|stop|restart|try-restart|reload|force-reload|checkconfig|status}"
+ exit 3
+esac
+
+exit $RETVAL
--- /dev/null
+#!/bin/sh
+# dump script used to generate .pot for translations
+
+. /etc/rc.d/init.d/functions
+
+nls "alarmwatch not configured (CHIPS not set), cannot start."
+nls "No kernel APM support"
+nls "(backgrounded)"
+nls "Setting up sound card mixer"
+nls "Sound card mixer is already set up"
+nls "Saving sound card mixer's settings"
+nls "Sound card mixer hasn't been set up"
+nls "Modular sound card detected."
+nls "Monolithic sound card detected."
+nls "MIDI device present."
+nls "MIDI device not detected."
+nls "Sound card not configured."
+nls "Configured Mount Points:"
+nls "Active Mount Points:"
+nls "Waiting for Coda server shutdown"
+nls "Setting Text Mode"
+nls "Loading console font and map"
+nls "Loading keyboard table"
+nls "Enabling SAK sequence"
+nls "Setting terminals to default values"
+nls "Missing service directory"
+nls "Create %s first." "$1"
+nls "no dictionaries found"
+nls "Uploading em8300 microcode"
+nls "Removing em8300 modules"
+nls "exim.conf: queue_only = true is missing"
+nls "Please edit /etc/sysconfig/frox !"
+nls "Redirecting FTP traffic"
+nls "Removing FTP traffic redirection"
+nls "ipchains/iptables not found. Cannot continue"
+nls "Generating %s" "$1"
+nls "Setting filter rules"
+nls "Flushing filter rules"
+nls "%s not generated" "$1"
+nls "%s outdated" "$1"
+nls "%s not applied" "$1"
+nls "filter rules applied"
+nls "Frame buffer present."
+nls "Frame buffer not present."
+nls "Setting default video mode"
+nls "Cannot start Pluto, system lacks /dev/random"
+nls "Dumpdir \`%s' does not exist, ignored." "$1"
+nls "Starting FreeS/WAN IPSEC"
+nls "Stopping FreeS/WAN IPSEC"
+nls "Please set %s in /etc/sysconfig/mouse" "$1"
+nls "Setting parameters for drive %s" "$1"
+nls "IP protocols logger"
+nls "IRCd Server"
+nls "Courier IMAP - Authdaemon"
+nls "DHCP Server"
+nls "Gnome Display Manager"
+nls "OpenH323 gatekeeper"
+nls "Jabber GaduGadu transport"
+nls "Jabber ICQ transport daemon"
+nls "KDE Display Manager"
+nls "OpenLDAP Update Replication Daemon"
+nls "Linux Infrared Remote Control daemon"
+nls "Linux Infrared Remote Control mouse daemon"
+nls "System logger"
+nls "Kernel logger"
+nls "KerberosV service"
+nls "%s is missing" "$1"
+nls "Starting Kerberos KDC"
+nls "Starting Administration Server"
+nls "Stopping Kerberos KDC"
+nls "Stopping Administration Server"
+nls "multicast routing daemon"
+nls "Dynamic Route Daemon"
+nls "%s config %s does not exist." "$1" "$2"
+nls "MySQL datadir %s not configured properly" "$1"
+nls "MySQL user not configured properly"
+nls "Edit %s and configure it." "$1"
+nls "MySQL database not initialized. Try \"%s init\" before start." "$1"
+nls "Seems that database is initialized now. Remove by hand %s" "$1"
+nls "before initializing database."
+nls "Creating privilege mysql tables"
+nls "Sorry, the host name is not configured."
+nls "Please configure the 'hostname' command to return a hostname."
+nls "Sorry, the host '%s' could not be looked up." "$1"
+nls "Please configure the 'hostname' command to return a correct hostname."
+nls "Initializing %s" "$1"
+nls "pks database not initialized. Try \"%s init\" before start." "$1"
+nls "Seems that database is initialized now."
+nls "Initializing database for pks"
+nls "No SSH host key found! You must run \"%s init\" first." "$1"
+nls "Now the SSH host key will be generated. Please note, that if you"
+nls "will use password for the key, you will need to type it on each"
+nls "reboot."
+nls "JAVA_HOME is not set! Edit /etc/sysconfig/tomcat"
+nls "Mounting NFS filesystems"
+nls "Unmounting NFS filesystems"
+nls "Configured NFS mountpoints:"
+nls "Active NFS mountpoints:"
+nls "/proc filesystem unavailable"
+nls "Registering %s" "$1"
+nls "Unregistering %s" "$1"
+nls "netsaint NSCA daemon"
+nls "Stopping MARS: stopping all connections"
+nls "Starting UPS drivers"
+nls "Stopping UPS drivers"
+nls "Reloading UPS drivers"
+nls "UPS drivers and network daemon"
+nls "UPS network daemon"
+nls "Syncing time for ntp"
+nls "Error: portmap isn't running"
+nls "netsaint NRPE daemon"
+nls "Name Switch Cache Daemon"
+nls "No kupdate[d] found. Run bdflush-1.6 for sleep support."
+nls "OpenH323 gatekeeper/proxy"
+nls "omniNames for omniORB"
+nls "No tunnels configured in /etc/sysconfig/openvpn"
+nls "Starting OpenVPN tunnel %s" "$1"
+nls "Stopping OpenVPN tunnel %s" "$1"
+nls "Dynamic DNS daemon"
+nls "Dynamic DNS Tools Server"
+nls "Starting PIM-SM multicast routing daemon"
+nls "Stopping PIM-SM multicast routing daemon"
+nls "Parallel Virtual Machine"
+nls "Killing PowerDNS without grace"
+nls "PowerDNS (Powered DNS server)"
+nls "PowerDNS (3 sec. timeout)"
+nls "PowerDNS in foreground (testing mode)"
+nls "PCIC not defined in /etc/sysconfig/pcmcia"
+nls "Unloading PCMCIA modules"
+nls "protolog TCP daemon"
+nls "protolog UDP daemon"
+nls "protolog ICMP daemon"
+nls "Error: /etc/sysconfig/postgresql not found"
+nls " PostgreSQL can't be run."
+nls "Error: PG_DB_CLUSTERS not found or is empty"
+nls "Note: this is only simple init action for convenience."
+nls "If you want some non-standard options, consider using initdb(1)."
+nls "Skipping existing cluster %s" "$1"
+nls "Initializing cluster %s" "$1"
+nls "REMEMBER to setup password for user \"postgres\""
+nls "PPPoE Relay Server"
+nls "PPPoE Server"
+nls "Radius-Cistron Server"
+nls "Starting Resin JSP Server"
+nls "Stopping Resin JSP Server"
+nls "NFS quota daemon"
+nls "NFS quotas"
+nls "Setting time from remote server(s): %s" "$1"
+nls "Remote time: "
+nls "Local time: "
+nls "Local machine hardware clock: "
+nls "Syncing hardware clock"
+nls " Please correct your /etc/sysconfig/rawdevices:"
+nls " rawdevices are now located in the directory /dev/raw/ "
+nls " If the command 'raw' still refers to /dev/raw as a file."
+nls " You'll have to upgrade your util-linux package"
+nls "You need to be root to use this command ! "
+nls "WARNING: RADVD can work only in IPv6 networks"
+nls "SAP DB WebServer"
+nls "SAP DB WebServer on port %s" "$1"
+nls "Put license file in /etc/sipd/license"
+nls "sensors daemon"
+nls "BUS or CHIP not configured in /etc/sysconfig/sensors"
+nls "SAPDB communication server"
+nls "SAPDB instance %s" "$1"
+nls "Prepare sendmail db"
+nls "system activity data collector"
+nls "Cannot find configuration file: %s" "$1"
+nls "Waiting %s seconds..." "$1"
+nls "done."
+nls "Toshiba fan daemon"
+nls "X Display Manager"
+nls "NIS map server"
+nls "Setup /etc/sysconfig/network::NISDOMAIN before use %s." "$1"
+nls "X Font Server"
+nls "NIS server"
+nls "Binding to the NIS domain"
+nls "Listening for a NIS domain server"
+nls "Try \"%s init\" before start." "$1"
+nls "Login name [admin]: "
+nls "Login password: "
+nls "Password again: "
+nls "ERROR: Passwords don't match"
+nls "Loading zebra configuration"
+nls "Starting Athlon Cooling"
+nls "Stoping Athlon Cooling"
+nls "Error: /etc/nessus/nessusd.conf not found"
+nls " Nessus daemon can't be run."
--- /dev/null
+#!/bin/sh
+# Firmware loader.
+# See also:
+# https://www.kernel.org/doc/Documentation/firmware_class/README
+# https://www.kernel.org/doc/Documentation/firmware_class/hotplug-script
+set -e
+
+# handle only firmware add requests
+if [ "$SUBSYSTEM" != "firmware" ]; then
+ exit 0
+fi
+if [ "$ACTION" != "add" ]; then
+ exit 0
+fi
+
+FIRMWARE_DIRS="/lib/firmware/updates/$(uname -r) /lib/firmware/updates \
+ /lib/firmware/$(uname -r) /lib/firmware"
+
+# @param string message
+# @param int loglevel. defaults to "6" (info)
+# Log levels can be:
+# Name String Meaning
+# KERN_EMERG "0" Emergency messages, system is about to crash or is unstable
+# KERN_ALERT "1" Something bad happened and action must be taken immediately
+# KERN_CRIT "2" A critical condition occurred like a serious hardware/software failure
+# KERN_ERR "3" An error condition, often used by drivers to indicate difficulties with the hardware
+# KERN_WARNING "4" A warning, meaning nothing serious by itself but might indicate problems
+# KERN_NOTICE "5" Nothing serious, but notably nevertheless. Often used to report security events.
+# KERN_INFO "6" Informational message e.g. startup information at driver initialization
+# KERN_DEBUG "7" Debug messages
+# KERN_CONT "c" "continued" line of log printout (only done after a line that had no enclosing \n)
+kmsg() {
+ local msg="$1" level=${2:-3}
+ echo "<$level>$msg" > /dev/kmsg
+}
+
+err() {
+ echo >&2 "$*"
+ kmsg "${0##*/}[$$] $*"
+}
+
+if [ ! -e /sys$DEVPATH/loading ]; then
+ err "firmware loader misses sysfs directory"
+ exit 1
+fi
+
+for DIR in $FIRMWARE_DIRS; do
+ [ -e "$DIR/$FIRMWARE" ] || continue
+ echo 1 > /sys$DEVPATH/loading
+ cat "$DIR/$FIRMWARE" > /sys$DEVPATH/data
+ echo 0 > /sys$DEVPATH/loading
+ exit 0
+done
+
+echo -1 > /sys$DEVPATH/loading
+err "Cannot find firmware file '$FIRMWARE'"
+exit 1
--- /dev/null
+#!/bin/sh
+# (C) 2001 Arkadiusz Miśkiewicz <misiek@pld.ORG.PL>
+# Hardware Profiles for rc-scripts TOTALNEW.
+
+PROFDIR="/etc/sysconfig/hwprofiles"
+QUIET=0
+
+. /etc/rc.d/init.d/functions
+. /etc/sysconfig/hwprof
+
+[ -z "${EDITOR}" ] && EDITOR=vi
+
+if [ "$(id -u)" != "0" ]; then
+ echo "Need superuser privileges. Can't continue!"
+ exit 1
+fi
+
+checkprofdir()
+{
+ if [ ! -d ${PROFDIR} -o ! -d ${PROFDIR}/data ]; then
+ echo "${PROFDIR} or ${PROFDIR}/data not found. Can't continue!"
+ echo "Check /etc/sysconfig/hwprof and hwprofile -h."
+ exit 1
+ fi
+}
+
+myecho()
+{
+ if [ $QUIET -eq 0 ]; then
+ echo $@
+ fi
+}
+
+showhelp()
+{
+echo '
+no opts - show help
+-a - add profile
+-d - delete profile
+-r foo - run specified profile or "default" if such exist
+-s - save/update running profile
+-f - find proper profile and run it
+-l - list configured profiles
+-q - be quiet (used only in few modes)
+
+Please send all bug reports to:
+pld-rc-scripts@pld-linux.org.
+'
+}
+
+# This function probably must be enhanced.
+md5sumgen()
+{
+ ( \
+ grep -v "MHz" /proc/cpuinfo 2> /dev/null \
+ grep -v "Latency" /proc/pci 2> /dev/null \
+ ) | md5sum | awk ' { gsub(/ .*$/,NIL); print $0 } '
+}
+
+while getopts adfhlsqr: opt "$@"; do
+ case "$opt" in
+ a)
+ checkprofdir
+
+ echo "Adding new profile..."
+
+ if [ -f /var/run/hwprofile ]; then
+ echo -n "Current profile is: "
+ cat /var/run/hwprofile
+ fi
+
+ PROFILE=
+ while [ -z "${PROFILE}" ]; do
+ echo -n "Enter profile name: "
+ read PROFILE
+
+ if [ -f ${PROFDIR}/${PROFILE}.md5 ]; then
+ echo "Profile ${PROFILE} exist. Try other name."
+ PROFILE=
+ fi
+ done
+
+ rm -rf ${PROFDIR}/${PROFILE}.* ${PROFDIR}/data/${PROFILE}/
+ md5sumgen > ${PROFDIR}/${PROFILE}.md5
+ LANG=C LC_ALL=C date > ${PROFDIR}/${PROFILE}.date
+ mkdir -p ${PROFDIR}/data/${PROFILE}/
+ chmod 700 ${PROFDIR}/data/${PROFILE}/
+
+ echo -n "Enter profile description (PROFDIR/${PROFILE}.desc): "
+ read DESCRIPTION
+ [ -z "${DESCRIPTION}" ] && DESCRIPTION="${PROFILE}"
+ echo "${DESCRIPTION}" > ${PROFDIR}/${PROFILE}.desc
+ echo "Now, editor will be started and you need to enter list of files"
+ echo "for this profile (later as ${EDITOR} ${PROFDIR}/${PROFILE}.files)."
+ echo "Press Enter."
+ read
+
+ if [ -f ${PROFDIR}/files -o ! -f ${PROFDIR}/${PROFILE}.files ]; then
+ cat ${PROFDIR}/files > ${PROFDIR}/${PROFILE}.files;
+ fi
+ ${EDITOR} ${PROFDIR}/${PROFILE}.files
+
+ FILES=
+ echo "Validating and copying valid files for this profile:"
+ for file in $(grep -v "^#" ${PROFDIR}/${PROFILE}.files); do
+ if [ ! -f ${file} -o "${file}" = "/etc/sysconfig/hwprof" ]; then
+ echo "${file}: invalid, skipping"
+ continue
+ fi
+
+ bfile=$(basename ${file})
+ echo "Copying ${file} to ${PROFDIR}/data/${PROFILE}/${file}..."
+ cp -dp --parents ${file} ${PROFDIR}/data/${PROFILE}/
+ FILES="${file}\n${FILES}"
+ done
+
+ echo -e "${FILES}" > ${PROFDIR}/${PROFILE}.files
+ rm -f ${PROFDIR}/${PROFILE}.*~
+
+ echo "New profile ready."
+ break
+ ;;
+ d)
+ checkprofdir
+
+ echo "Deleting existing profile..."
+
+ PROFILE=
+ while [ -z ${PROFILE} ]; do
+ echo -n "Enter profile name: "
+ read PROFILE
+
+ if [ ! -f ${PROFDIR}/${PROFILE}.md5 ]; then
+ echo "Profile ${PROFILE} doesn't exist. Try other name."
+ PROFILE=
+ fi
+ done
+
+ echo -n "Are you sure? [y/N]: "
+ read YN
+ case "${YN}" in
+ y | Y | t | T )
+ # ok
+ ;;
+ *)
+ echo "Exiting then."
+ exit 1
+ ;;
+ esac
+
+ rm -rf ${PROFDIR}/${PROFILE}.* ${PROFDIR}/data/${PROFILE}/
+ echo "Done."
+ break
+ ;;
+ r)
+
+ checkprofdir
+
+ PROFILE="${OPTARG}"
+
+ if [ -z "${PROFILE}" -o ! -f ${PROFDIR}/${PROFILE}.files ]; then
+ echo "Can't setup ${PROFILE}. No required data."
+ exit 1
+ fi
+
+ echo -n "Setting up profile \"${PROFILE}\" "
+ myecho "";
+
+ for file in $(grep -v "^#" ${PROFDIR}/${PROFILE}.files); do
+ if [ ! -f ${file} -o "${file}" = "/etc/sysconfig/hwprof" ]; then
+ myecho "${file}: invalid, skipping"
+ continue
+ fi
+ echo -n ".";
+
+ myecho "Copying ${PROFDIR}/data/${PROFILE}/${file} to ${file}..."
+ cp -dp ${PROFDIR}/data/${PROFILE}/${file} ${file} 2>/dev/null
+ done
+
+ echo ${PROFILE} > /var/run/hwprofile
+ echo " Done.";
+ myecho "Profile \"${PROFILE}\" running."
+ break
+ ;;
+ f)
+ checkprofdir
+
+ PROFILE=
+ PROFILEMD5=$(md5sumgen)
+
+ myecho "Trying to find proper profile..."
+ for prof in $(ls -1 ${PROFDIR}/*.md5 2> /dev/null); do
+ prof=$(basename ${prof})
+ CURRENTMD5="$(cat ${PROFDIR}/${prof} 2> /dev/null)"
+ # echo "$prof ${CURRENTMD5} ${PROFILEMD5}";
+ [ -z "${CURRENTMD5}" ] && continue
+
+ if [ "${CURRENTMD5}" = "${PROFILEMD5}" ]; then
+ PROFILE=$(echo ${prof} | awk ' { gsub(/\.md5/,NIL); print $0 } ')
+ break;
+ fi
+ done
+
+ if [ -z "${PROFILE}" ]; then
+ if is_yes "${ASKFORPROFILE}"; then
+ echo "Available profiles:";
+ PS3='Enter profile number: ';
+ LISTA=$(ls ${PROFDIR}/*.desc 2> /dev/null);
+ for i in ${LISTA}; do
+ a=$(basename $i .desc);
+ LISTA1="${a} ${LISTA1}";
+ done
+ LISTA1="${LISTA1} Default";
+
+ select PROFILE in $LISTA1; do
+ if [ -n "${PROFILE}" ]; then
+ break
+ fi
+ done
+
+ if [ "${PROFILE}" = "Default" ]; then
+ PROFILE=
+ fi
+ fi
+ fi
+
+ if [ -z "${PROFILE}" ]; then
+ if [ ! -f ${PROFDIR}/default.md5 ]; then
+ echo "Valid profile not found. Starting with current files."
+ exit 0
+ else
+ echo "Valid profile not found. Starting with \"default\" profile."
+ PROFILE=default
+ fi
+ fi
+
+ if [ ! -z "${PROFILE}" ]; then
+ myecho "Found profile \"${PROFILE}\" with md5sum \"${PROFILEMD5}\"."
+ if [ $QUIET -eq 0 ]; then
+ $0 -r ${PROFILE};
+ else
+ $0 -qr ${PROFILE};
+ fi
+ fi
+ break
+ ;;
+ s)
+ checkprofdir
+
+ PROFILE=$(cat /var/run/hwprofile 2> /dev/null)
+
+ if [ -z "${PROFILE}" ]; then
+ echo "No profile currenty running."
+ exit 1
+ fi
+
+ if [ ! -f ${PROFDIR}/${PROFILE}.files ]; then
+ echo "${PROFILE}.files is missing. Can't continue."
+ exit 1
+ fi
+
+ echo -n "Saving/updating current [${PROFILE}] profile "
+ md5sumgen > ${PROFDIR}/${PROFILE}.md5
+ myecho "";
+ for file in $(grep -v "^#" ${PROFDIR}/${PROFILE}.files); do
+ echo -n ".";
+
+ if [ ! -f ${file} -o "${file}" = "/etc/sysconfig/hwprof" ]; then
+ myecho "${file}: invalid, skipping"
+ continue
+ fi
+
+ myecho "Copying ${file} to ${PROFDIR}/data/${PROFILE}/${file}"
+ cp -dp --parents ${file} ${PROFDIR}/data/${PROFILE}/
+ done
+ echo " Done."
+ break
+ ;;
+ l)
+ echo "List of configured profiles:"
+
+ for prof in $(ls -1 ${PROFDIR}/*.md5 2> /dev/null); do
+ prof=$(basename ${prof})
+ profname=$(echo ${prof} | awk ' { gsub(/\.md5/,NIL); print $0 } ')
+ echo "Name : ${profname}"
+ echo -n "Desc : "
+ if [ -f ${PROFDIR}/${profname}.md5 ]; then
+ cat ${PROFDIR}/${profname}.desc
+ else
+ echo "MISSING"
+ fi
+ echo -n "Created : "
+ if [ -f ${PROFDIR}/${profname}.date ]; then
+ cat ${PROFDIR}/${profname}.date
+ else
+ echo "MISSING"
+ fi
+ echo -n "md5sum : "
+ if [ -f ${PROFDIR}/${profname}.md5 ]; then
+ cat ${PROFDIR}/${profname}.md5
+ else
+ echo "MISSING"
+ fi
+ echo -n "Files : "
+ if [ -f ${PROFDIR}/${profname}.files ]; then
+ cat ${PROFDIR}/${profname}.files | xargs
+ else
+ echo "MISSING"
+ fi
+ echo
+ done
+ echo "End."
+ break
+ ;;
+ q)
+ QUIET=1; export QUIET;
+ ;;
+ *)
+ showhelp
+ exit 1
+ break
+ ;;
+ esac
+done
+
+if [ "$#" -le "0" -o "$OPTIND" -eq 1 ]; then
+ showhelp
+ exit 1
+fi
+
+exit 0
--- /dev/null
+#
+# inittab This file describes how the INIT process should set up
+# the system in a certain run-level.
+#
+#
+# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+# Modified for RHS Linux by Marc Ewing and Donnie Barnes
+#
+
+# Default runlevel. The runlevels used by PLD Linux are:
+# 0 - halt (Do NOT set initdefault to this)
+# 1 - Single user mode
+# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
+# 3 - Full multiuser mode
+# 4 - unused
+# 5 - X11
+# 6 - reboot (Do NOT set initdefault to this)
+#
+id:3:initdefault:
+
+# System initialization.
+si::sysinit:/etc/rc.d/rc.sysinit
+
+l0:0:wait:/etc/rc.d/rc 0
+l1:1:wait:/etc/rc.d/rc 1
+l2:2:wait:/etc/rc.d/rc 2
+l3:3:wait:/etc/rc.d/rc 3
+l4:4:wait:/etc/rc.d/rc 4
+l5:5:wait:/etc/rc.d/rc 5
+l6:6:wait:/etc/rc.d/rc 6
+
+# Trap CTRL-ALT-DELETE
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Trap KeyboardSignal
+#kb::kbrequest:<insert your action here>
+
+# When our UPS tells us power has failed, assume we have a few minutes
+# of power left. Schedule a shutdown for 2 minutes from now.
+# This does, of course, assume you have powerd installed and your
+# UPS connected and working correctly.
+pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
+
+# If power was restored before the shutdown kicked in, cancel it.
+pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
+
+# Run agetty on serial port
+#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100
+
+# Run gettys in standard runlevels
+1:12345:respawn:/sbin/mingetty --noclear tty1
+# spawn root login on tty1 without /etc/issue
+#1:12345:respawn:/sbin/mingetty tty1 --noclear --autologin root --noissue
+2:2345:respawn:/sbin/mingetty tty2
+3:2345:respawn:/sbin/mingetty tty3
+#4:2345:respawn:/sbin/mingetty tty4
+#5:2345:respawn:/sbin/mingetty tty5
+#6:2345:respawn:/sbin/mingetty tty6
+#7:2345:respawn:/sbin/mingetty tty7
+#8:2345:respawn:/sbin/mingetty tty8
+#9:2345:respawn:/sbin/mingetty tty9
+#10:2345:respawn:/sbin/mingetty tty10
+#11:2345:respawn:/sbin/mingetty tty11
+#12:2345:respawn:/sbin/mingetty tty12
+
+# Examples
+#9:2345:respawn:/sbin/mingetty --mono tty9
+#10:2345:respawn:/sbin/mingetty --remote-host=some.host.in.net.pl tty10
+
+# Run xdm in runlevel 5
+#x:5:respawn:/usr/bin/X11/xdm -nodaemon
--- /dev/null
+#
+#
+
+isapnpdir = @sysconfigdir@/isapnp
+
+isapnp_DATA = \
+ isapnp-kernel.conf
+
+EXTRA_DIST = \
+ $(isapnp_DATA)
--- /dev/null
+# Example configuration for Sierra V.34 Data/Fax/Voice/VoiceView Speakerphone
+# internal modem usable only on 2.4 kernels with ISAPNP support compiled in.
+# Read /usr/src/linux/Documentation/isapnp.txt for more informations.
+
+#card 0 SSC0109
+#dev 0 SSC0000
+#deactivate
+#card 0 SSC0109
+#dev 0 SSC0000
+#port 0 744
+#irq 0 3
+#activate
--- /dev/null
+#!/bin/csh
+#
+#
+# FIXME: this file is broken, as you can see it does nothing (does not actually load i18n file)
+# TODO: sync with lang.sh
+#
+
+test -f /etc/sysconfig/i18n
+if ($status == 0) then
+ if ($?LANG) then
+ setenv LANG
+ endif
+ if ($?LC_ALL) then
+ setenv LC_ALL
+ endif
+ if ($?LINGUAS) then
+ setenv LINGUAS
+ endif
+ if ($?SYSTERM) then
+ setenv TERM=$SYSTERM
+ endif
+ if ($?_XKB_CHARSET) then
+ setenv _XKB_CHARSET
+ endif
+ if ($?INPUTRC) then
+ setenv INPUTRC
+ endif
+ if ($?LESSCHARSET) then
+ setenv LESSCHARSET
+ else if ($TERM == linux-lat) then
+ setenv LESSCHARSET latin1
+ endif
+endif
--- /dev/null
+#!/bin/sh
+#
+#
+
+if [ -f /etc/sysconfig/i18n ]; then
+ ORG_LANG=$LANG
+ ORG_LC_ADDRESS=$LC_ADDRESS
+ ORG_LC_COLLATE=$LC_COLLATE
+ ORG_LC_CTYPE=$LC_CTYPE
+ ORG_LC_IDENTIFICATION=$LC_IDENTIFICATION
+ ORG_LC_MEASUREMENT=$LC_MEASUREMENT
+ ORG_LC_MESSAGES=$LC_MESSAGES
+ ORG_LC_MONETARY=$LC_MONETARY
+ ORG_LC_NAME=$LC_NAME
+ ORG_LC_NUMERIC=$LC_NUMERIC
+ ORG_LC_PAPER=$LC_PAPER
+ ORG_LC_TELEPHONE=$LC_TELEPHONE
+ ORG_LC_TIME=$LC_TIME
+ ORG_LC_ALL=$LC_ALL
+
+ . /etc/sysconfig/i18n
+
+ # we prefer session settings (that came from ssh for example)
+ # instead of system one
+
+ LANG=${ORG_LANG:-$LANG}
+ LC_ADDRESS=${ORG_LC_ADDRESS:-$LC_ADDRESS}
+ LC_COLLATE=${ORG_LC_COLLATE:-$LC_COLLATE}
+ LC_CTYPE=${ORG_LC_CTYPE:-$LC_CTYPE}
+ LC_IDENTIFICATION=${ORG_LC_IDENTIFICATION:-$LC_IDENTIFICATION}
+ LC_MEASUREMENT=${ORG_LC_MEASUREMENT:-$LC_MEASUREMENT}
+ LC_MESSAGES=${ORG_LC_MESSAGES:-$LC_MESSAGES}
+ LC_MONETARY=${ORG_LC_MONETARY:-$LC_MONETARY}
+ LC_NAME=${ORG_LC_NAME:-$LC_NAME}
+ LC_NUMERIC=${ORG_LC_NUMERIC:-$LC_NUMERIC}
+ LC_PAPER=${ORG_LC_PAPER:-$LC_PAPER}
+ LC_TELEPHONE=${ORG_LC_TELEPHONE:-$LC_TELEPHONE}
+ LC_TIME=${ORG_LC_TIME:-$LC_TIME}
+ LC_ALL=${ORG_LC_ALL:-$LC_ALL}
+
+ unset ORG_LANG ORG_LC_ADDRESS ORG_LC_COLLATE ORG_LC_CTYPE ORG_LC_IDENTIFICATION ORG_LC_MEASUREMENT
+ unset ORG_LC_MESSAGES ORG_LC_MONETARY ORG_LC_NAME ORG_LC_NUMERIC ORG_LC_PAPER ORG_LC_TELEPHONE
+ unset ORG_LC_TIME ORG_LC_ALL
+
+ [ "$LANG" ] && export LANG || unset LANG
+ [ "$LC_ADDRESS" ] && export LC_ADDRESS || unset LC_ADDRESS
+ [ "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
+ [ "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
+ [ "$LC_IDENTIFICATION" ] && export LC_IDENTIFICATION || unset LC_IDENTIFICATION
+ [ "$LC_MEASUREMENT" ] && export LC_MEASUREMENT || unset LC_MEASUREMENT
+ [ "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
+ [ "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
+ [ "$LC_NAME" ] && export LC_NAME || unset LC_NAME
+ [ "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
+ [ "$LC_PAPER" ] && export LC_PAPER || unset LC_PAPER
+ [ "$LC_TELEPHONE" ] && export LC_TELEPHONE || unset LC_TELEPHONE
+ [ "$LC_TIME" ] && export LC_TIME || unset LC_TIME
+ [ "$LC_ALL" ] && export LC_ALL || unset LC_ALL
+ [ "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
+ [ "$LINGUAS" ] && export LINGUAS || unset LINGUAS
+
+ [ "$_XKB_CHARSET" ] && export _XKB_CHARSET || unset _XKB_CHARSET
+
+ if [ "$INPUTRC" ]; then
+ export INPUTRC
+ fi
+
+ if [ "$LESSCHARSET" ]; then
+ export LESSCHARSET
+ elif [ "$TERM" = "linux-lat" ]; then
+ LESSCHARSET=latin1
+ export LESSCHARSET
+ fi
+fi
--- /dev/null
+@SET_MAKE@
+
+sbin_SCRIPTS = \
+ ifdown \
+ ifup \
+ tnldown \
+ tnlup
+
+#scriptsdir = @networkscriptsdir@
+scriptsdir = @exec_prefix@/lib/$(PACKAGE)
+
+scripts_SCRIPTS = \
+ ifdown-br \
+ ifdown-irda \
+ ifdown-ppp \
+ ifdown-post \
+ ifdown-sl \
+ ifdown-vlan \
+ ifup-aliases \
+ ifup-br \
+ ifup-ipx \
+ ifup-irda \
+ ifup-iucv \
+ ifup-neigh \
+ ifup-plip \
+ ifup-plusb \
+ ifup-post \
+ ifup-ppp \
+ ifup-routes \
+ ifup-sl \
+ ifup-vlan
+
+scripts_DATA = \
+ functions \
+ functions.network
+
+EXTRA_DIST = \
+ $(sbin_SCRIPTS) \
+ $(scripts_SCRIPTS) \
+ $(scripts_DATA)
+
--- /dev/null
+#!/bin/sh - keep it for file(1) to get bourne shell script result
+# functions This file contains functions to be used by most or all
+# shell scripts in the /etc/rc.d/init.d directory.
+#
+#
+# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+# Hacked by: Greg Galloway and Marc Ewing
+# Modified for PLD Linux by:
+# Marek Obuchowicz <elephant@pld-linux.org>
+# Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+# Michał Kochanowicz <mkochano@pld-linux.org>
+# Łukasz Pawelczyk <havner@pld-linux.org>
+
+# First set up a default search path.
+export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
+
+# Set defaults
+if [ -z "$COLUMNS" -o -z "$LINES" ]; then
+ _setterm() {
+ set -- $(stty size 2>/dev/null)
+ LINES=${LINES:-$1}
+ COLUMNS=${COLUMNS:-$2}
+ }
+ _setterm
+ unset _setterm
+fi
+[ -z "$LINES" ] || [ "$LINES" -le 0 ] && LINES=40
+[ -z "$COLUMNS" ] || [ "$COLUMNS" -le 0 ] && COLUMNS=80
+export LINES COLUMNS
+INIT_COL=$((COLUMNS - 13))
+
+# Set colors
+RED=1
+GREEN=2
+YELLOW=3
+BLUE=4
+MAGENTA=5
+CYAN=6
+WHITE=7
+NORMAL=15
+# Bold definition (second parameter to termput setaf)
+BOLD=1
+NOBOLD=0
+# Default colors
+CBRACKETS="$CYAN" # brackets [ ] color
+CDONE="$GREEN" # DONE and WORK color
+CBUSY="$MAGENTA" # BUSY color
+CFAIL="$RED" # FAIL and DIED color
+CPOWEREDBY="$CYAN" # "Powered by" color
+CPLD="$GREEN" # "PLD Linux Distribution" color
+CI="$RED" # Capital I color (press I to enter interactive startup)
+CRESMAN="$GREEN" # "Resource Manager" color
+CHARS="" # Characters displayed on the beginning of show line
+CCHARS="$NORMAL" # Color of these characters (look at /etc/sysconfig/init-colors.gentoo example)
+
+# Source configuration if available - may override default values
+[ -r /etc/sysconfig/init-colors ] && . /etc/sysconfig/init-colors
+[ -r /etc/sysconfig/system ] && . /etc/sysconfig/system
+[ -r /etc/sysconfig/bootsplash ] && . /etc/sysconfig/bootsplash
+
+# if initscript is invoked via bash, enable RedHat/Fedora compatibility
+# RC_FEDORA is "set" if enabled and "unset" when not, but it's "value" is always empty
+# this is useful for inline constructs
+if [ "${BASH_VERSION+set}" = "set" ]; then
+ RC_LOGGING=yes
+ FASTRC=no
+ RC_FEDORA=
+else
+ unset RC_FEDORA || :
+fi
+
+if [ -z "$VSERVER" -o "$VSERVER" = "detect" ]; then
+ {
+ while read _f _ctx; do
+ [ "$_f" = "VxID:" -o "$_f" = "s_context:" ] && break
+ done </proc/self/status
+ } 2>/dev/null
+ if [ -z "$_ctx" -o "$_ctx" = "0" ]; then
+ VSERVER=no
+ else
+ VSERVER=yes
+ fi
+ unset _f _ctx
+fi
+
+# VSERVER_ISOLATION_NET = isolation only inside of vserver guests
+if [ -z "$VSERVER_ISOLATION_NET" -o "$VSERVER_ISOLATION_NET" = "detect" ]; then
+ VSERVER_ISOLATION_NET=no
+ if [ "$VSERVER" = "yes" ]; then
+ if [ -f /proc/self/nsproxy ]; then
+ # older kernels
+ {
+ while read _t _data; do
+ [ "$_t" = "net:" ] && break
+ done < /proc/self/nsproxy
+ } 2> /dev/null
+ if [ "${_data##*\(}" = "I)" ]; then
+ VSERVER_ISOLATION_NET=yes
+ fi
+ elif [ -f /proc/self/ninfo ]; then
+ # newer kernels
+ {
+ while read _t _data; do
+ [ "$_t" = "NCaps:" ] && break
+ done < /proc/self/ninfo
+ } 2> /dev/null
+ if [ "${_t}" = "NCaps:" ]; then
+ VSERVER_ISOLATION_NET=yes
+ fi
+ else
+ # assume (very?) old kernel mode
+ VSERVER_ISOLATION_NET=yes
+ fi
+ unset _f _data
+ fi
+fi
+
+# we need to know in functions if we were called from a terminal
+if [ -z "$ISATTY" ]; then
+ [ -t ] && ISATTY=yes || ISATTY=no
+ export ISATTY
+fi
+
+is_yes() {
+ # Test syntax
+ if [ $# = 0 ]; then
+ msg_usage " is_yes {value}"
+ return 2
+ fi
+
+ # Check value
+ case "$1" in
+ yes|Yes|YES|true|True|TRUE|on|On|ON|Y|y|1)
+ # true returns zero
+ return 0
+ ;;
+ *)
+ # false returns one
+ return 1
+ ;;
+ esac
+}
+
+is_no() {
+ # Test syntax
+ if [ $# = 0 ]; then
+ msg_usage " is_no {value}"
+ return 2
+ fi
+
+ case "$1" in
+ no|No|NO|false|False|FALSE|off|Off|OFF|N|n|0)
+ # true returns zero
+ return 0
+ ;;
+ *)
+ # false returns one
+ return 1
+ ;;
+ esac
+}
+
+# checks if file is empty
+# empty lines and lines beginning with hash are ignored
+is_empty_file() {
+ [ -s "$1" ] || return 0
+ grep -vqE "^(#|[[:blank:]]*$)" "$1" && return 1 || return 0
+}
+
+# returns OK if $1 contains $2
+strstr() {
+ [ "${1#*$2*}" = "$1" ] && return 1
+ return 0
+}
+
+# Apply sysctl settings, including files in /etc/sysctl.d
+apply_sysctl() {
+ if [ -x /lib/systemd/systemd-sysctl ]; then
+ /lib/systemd/systemd-sysctl
+ return
+ fi
+
+ local file
+ for file in /usr/lib/sysctl.d/*.conf; do
+ [ -f /run/sysctl.d/${file##*/} ] && continue
+ [ -f /etc/sysctl.d/${file##*/} ] && continue
+ test -f "$file" && sysctl -q -e -p "$file"
+ done
+ for file in /run/sysctl.d/*.conf; do
+ [ -f /etc/sysctl.d/${file##*/} ] && continue
+ test -f "$file" && sysctl -q -e -p "$file"
+ done
+ for file in /etc/sysctl.d/*.conf; do
+ test -f "$file" && sysctl -q -e -p "$file"
+ done
+ sysctl -q -e -p /etc/sysctl.conf
+}
+
+if is_yes "$FASTRC" || is_yes "$IN_SHUTDOWN"; then
+ RC_LOGGING=no
+fi
+
+if is_no "$RC_LOGGING"; then
+ initlog() {
+ RESULT=0
+ while [ "$1" != "${1##-}" ]; do
+ case $1 in
+ -c)
+ shift
+ $1
+ RESULT=$?
+ break
+ ;;
+ *)
+ shift
+ ;;
+ esac
+ done
+ return $RESULT
+ }
+fi
+
+kernelver() {
+ local _x _y _z v v1 old_IFS ver
+ {
+ read _x _y v _z
+ old_IFS=$IFS
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
+ set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
+ IFS=$old_IFS
+
+ ver=${3}
+ while [ ${#ver} -lt 3 ]; do ver="0$ver"; done
+ ver="$2$ver"
+ while [ ${#ver} -lt 6 ]; do ver="0$ver"; done
+ ver="$1$ver"
+ while [ ${#ver} -lt 9 ]; do ver="0$ver"; done
+ echo $ver
+ } < /proc/version
+}
+
+kernelverser() {
+ local _x _y _z v v1 old_IFS ver
+ {
+ read _x _y v _z
+ old_IFS=$IFS
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
+ set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
+ IFS=$old_IFS
+ ver=$2
+ while [ ${#ver} -lt 3 ]; do ver="0$ver"; done
+ ver="$1$ver"
+ while [ ${#ver} -lt 6 ]; do ver="0$ver"; done
+ echo $ver
+ } </proc/version
+}
+
+kernelvermser() {
+ local _x _y _z v v1 old_IFS ver
+ {
+ read _x _y v _z
+ old_IFS=$IFS
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
+ set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
+ IFS=$old_IFS
+ ver="$1"
+ while [ ${#ver} -lt 3 ]; do ver="0$ver"; done
+ echo $ver
+ } </proc/version
+}
+
+# Colors workaround
+termput() {
+ is_yes "$ISATTY" || return
+
+ if is_yes "$FASTRC" || is_no "$TPUT"; then
+ case "$1" in
+ hpa)
+ echo -ne "\033[$(($2+1))G"
+ ;;
+ cuu*)
+ echo -ne "\033[${2}A"
+ ;;
+ el)
+ echo -ne "\033[0K"
+ ;;
+ setaf)
+ local ISBOLD
+ if [ -n "$3" ]; then
+ ISBOLD="$3"
+ else
+ ISBOLD="$NOBOLD";
+ fi
+ is_yes "$COLOR_INIT" && echo -ne "\033[${ISBOLD};3${2}m"
+ ;;
+ op)
+ termput setaf $NORMAL
+ ;;
+ esac
+ else
+ case "$1" in
+ hpa | cuu* | el)
+ tput "$@"
+ ;;
+ setaf)
+ if [ "$3" = "1" ]; then tput bold; else tput sgr0; fi
+ is_yes "$COLOR_INIT" && tput setaf "$2"
+ ;;
+ op)
+ termput setaf $NORMAL
+ ;;
+ esac
+ fi
+}
+
+if [ ! -x /bin/printf ]; then
+ # printf equivalent
+ # FIXME: buggy when single or double quotes in message!
+ printf() {
+ local text m
+ text="$1"
+ shift
+ if [ $# -gt 0 ]; then
+ m="$1"
+ shift
+ while [ $# -gt 0 ]; do
+ m="$m\",\"$1"
+ shift
+ done
+ fi
+ awk "BEGIN {printf \"$text\", \"$m\"; }"
+ }
+fi
+
+# National language support function
+nls() {
+ local msg_echo nls_domain text message
+ msg_echo='\n'
+ nls_domain="$NLS_DOMAIN"
+ while [ "$1" != "${1##-}" ]; do
+ case "$1" in
+ --nls-domain)
+ shift
+ nls_domain="$1"
+ shift
+ ;;
+ -n)
+ msg_echo=''
+ shift
+ ;;
+ esac
+ done
+ message="$1"
+ shift
+
+ # empty message, so we return --misiek
+ if [ -z "$message" ]; then
+ echo -en "$msg_echo"
+ return
+ fi
+
+ if is_yes "$GETTEXT"; then
+ message=$(TEXTDOMAINDIR="/etc/sysconfig/locale" gettext -e --domain="${nls_domain:-rc-scripts}" "$message")
+ fi
+
+ printf "$message" "$@"
+ echo -en "$msg_echo"
+}
+
+rc_splash() {
+ local action="$1"
+
+ if ! is_no "$BOOT_SPLASH" && ! is_yes "$VSERVER"; then
+ [ -x /bin/splash ] && /bin/splash "$action"
+ fi
+
+ : $((progress++))
+}
+
+msg_network_down() {
+ nls "ERROR: Networking is down. %s can't be run." "$1" >&2
+}
+
+msg_starting() {
+ show "Starting %s service" "$1"
+}
+
+msg_already_running() {
+ nls "%s service is already running." "$1"
+}
+
+msg_stopping() {
+ show "Stopping %s service" "$1"
+}
+
+msg_not_running() {
+ nls "%s service is not running." "$1"
+}
+
+msg_reloading() {
+ show "Reloading %s service" "$1"
+}
+
+msg_usage() {
+ nls "Usage: %s" "$*"
+}
+
+# Some functions to handle PLD Linux-style messages
+show() {
+ local text len time
+
+ if is_yes "$RC_UPTIME"; then
+ time=$(awk '{printf("[%8.2f] ", $1)}' /proc/uptime)
+ fi
+
+ if is_no "$FASTRC" && is_yes "$GETTEXT"; then
+ text=$time$(nls -n "$@")
+ else
+ text=$time$(printf "$@")
+ fi
+ len=${#text}
+ while [ $((len++)) -lt $INIT_COL ]; do
+ text="$text."
+ done
+ if [ -n "$CHARS" ]; then
+ termput setaf $CCHARS
+ echo -n "$CHARS"
+ termput op
+ fi
+ echo -n "$text"
+}
+
+deltext() {
+ termput hpa $INIT_COL
+}
+
+# Displays message in square brackests ("[ DONE ]"). Takes two arguments.
+# First is the text to display, second is color number to use (argument to
+# tput setaf). If second argument is not given, default (2, green) will be
+# used).
+progress() {
+ local COLOR
+ if [ -n "$2" ]; then
+ COLOR="$2"
+ else
+ COLOR="$CDONE"
+ fi
+ deltext
+ echo -n "$(termput setaf $CBRACKETS)[$(termput setaf $COLOR) $(nls --nls-domain rc-scripts "$1") $(termput setaf $CBRACKETS)]$(termput op)"
+}
+
+busy() {
+ echo -n "$_busy"
+}
+
+ok() {
+ echo -ne "$_ok${RC_FEDORA+\\r}${RC_FEDORA-\\n}"
+}
+
+started() {
+ echo "$_started"
+}
+
+fail() {
+ echo -ne "$_fail${RC_FEDORA+\\r}${RC_FEDORA-\\n}"
+ return 1
+}
+
+died() {
+ echo "$_died"
+ return 1
+}
+
+# Check if $pid (could be plural) are running
+checkpid() {
+ while [ "$1" ]; do
+ [ -d "/proc/$1" ] && return 0
+ shift
+ done
+ return 1
+}
+
+# - outside chroot get only those processes, which are outside chroot.
+# - inside chroot get only those processes, which are inside chroot.
+# - don't filter out pids which do not have corresponding running processes (process died etc)
+# (note: some processes like named are chrooted but run outside chroot)
+# - do nothing inside vserver
+filter_chroot() {
+ # no pids, exit early
+ [ $# -eq 0 ] && return
+
+ # filter by pid namespace if such dir exists for current process
+ # we do filter in containers as stacked containers are possible with LXC
+ if [ -d /proc/$$/ns ]; then
+ local pids
+ pids=$(filter_ns "$@") && set -- "$pids"
+ fi
+
+ if is_yes "$VSERVER"; then
+ echo $@
+ return
+ fi
+
+ if [ $# -lt 1 -o ! -d /proc/1 ]; then
+ echo $@
+ return
+ fi
+
+ local root_dir good_pids="" good_add_pid
+ for root_pid in $@; do
+ root_dir=$(resolvesymlink /proc/${root_pid}/root)
+ if [ -n "$root_dir" ]; then
+ good_add_pid=1
+ if [ -n "${SYSTEM_CHROOTS}" ]; then
+ for r_dir in ${SYSTEM_CHROOTS}; do
+ echo "$root_dir" | grep -q "^${r_dir}" && good_add_pid=0
+ done
+ fi
+ [ "$good_add_pid" -eq 1 ] && good_pids="$good_pids $root_pid"
+ elif [ ! -d "/proc/$root_pid" ]; then
+ good_pids="$good_pids $root_pid"
+ fi
+ done
+ echo $good_pids
+}
+
+# similar to filter_chroot, but filter based on /proc/PID/ns/pid value
+filter_ns() {
+ local cur_ns=$(resolvesymlink /proc/$$/ns/pid)
+ [ "$cur_ns" ] || return 1
+
+ local pid ns pids=""
+ # add pids if it matches current pid namespace
+ # we should add pids what do not exist (dead processes),
+ # but not add pids whose namespace does not match
+ # (processes belonging to different NS do exist in /proc)
+ for pid in "$@"; do
+ if [ ! -d /proc/$pid ]; then
+ pids="$pids $pid"
+ continue
+ fi
+ ns=$(resolvesymlink /proc/$pid/ns/pid)
+ if [ "$ns" = "$cur_ns" ]; then
+ pids="$pids $pid"
+ fi
+ done
+ echo $pids
+ return 0
+}
+
+# Usage:
+# run_cmd Message command_to_run
+# run_cmd -a Message command_to_run
+# run_cmd --user "username" "Message" command_to_run
+run_cmd() {
+ local force_err=0 exit_code=0 errors user
+ while [ $# -gt 0 ]; do
+ case "$1" in
+ -a)
+ force_err=1
+ ;;
+ --user)
+ shift
+ user=$1
+ ;;
+ *)
+ break
+ esac
+ shift
+ done
+
+ local message=$1; shift
+ show "$message"; busy
+
+ if errors=$(
+ cd /
+ export HOME=/tmp TMPDIR=/tmp
+ if is_no "$RC_LOGGING"; then
+ ${user:+setuidgid -s $user} "$@" 2>&1
+ else
+ ${user:+setuidgid -s $user} initlog -c "$*" 2>&1
+ fi
+ ); then
+ ok
+ log_success "$1 $message"
+ else
+ fail
+ log_failed "$1 $message"
+ exit_code=1
+ fi
+ [ -n "$errors" ] && [ $exit_code -eq 1 -o $force_err -eq 1 ] && echo "$errors"
+ return $exit_code
+}
+
+_daemon_set_ulimits() {
+ local opt val ksh=${KSH_VERSION:+1}
+ set -- ${SERVICE_LIMITS:-$DEFAULT_SERVICE_LIMITS}
+ while [ $# -gt 0 ]; do
+ opt=$1
+ val=$2
+ if [ "$ksh" ]; then
+ case "$opt" in
+ -Hu)
+ opt=-Hp
+ ;;
+ -Su)
+ opt=-Sp
+ ;;
+ -u)
+ opt=-p
+ ;;
+ esac
+ fi
+ ulimit $opt $val
+ shift 2
+ done
+}
+
+# A function to start a program (now it's useful on read-only filesystem too)
+daemon() {
+ local errors="" prog="" end="" waitname="" waittime=""
+ local exit_code=0
+ local nice=$SERVICE_RUN_NICE_LEVEL
+ local fork user closefds redirfds pidfile makepid chdir=/
+
+ # NOTE: if you wonder how the shellish (by syntax) $prog works in ssd mode,
+ # then the answer is: it totally ignores $prog and uses "$@" itself.
+
+ while [ $# -gt 0 ]; do
+ case $1 in
+ '')
+ msg_usage " daemon [--check] [--user user] [--fork] [--chdir directory] [--closefds] [--redirfds] [--waitforname procname] [--waitfortime seconds] [--pidfile file] [--makepid] [+/-nicelevel] {program} <program args>"
+ return 2
+ ;;
+ --check)
+ # for compatibility with redhat/mandrake
+ nls "warning: --check option is ignored!"
+ shift
+ ;;
+ --user)
+ shift
+ user=$1
+ ;;
+ --fork)
+ fork=1
+ end='&'
+ ;;
+ --chdir)
+ shift
+ chdir=$1
+ ;;
+ --closefds)
+ closefds=1
+ ;;
+ --redirfds)
+ redirfds=1
+ ;;
+ --waitforname)
+ shift
+ waitname="$1"
+ ;;
+ --waitfortime)
+ shift
+ waittime="$1"
+ ;;
+ --pidfile=?*)
+ pidfile="${1#--pidfile=}"
+ case "$pidfile" in /*);; *) pidfile="/var/run/$pidfile";; esac
+ ;;
+ --pidfile)
+ shift
+ pidfile="$1"
+ case "$pidfile" in /*);; *) pidfile="/var/run/$pidfile";; esac
+ ;;
+ --makepid)
+ makepid=1
+ ;;
+ -*|+*)
+ nice=$1
+ shift
+ break
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+ done
+ if [ -n "$user" -a "$user" != "root" ]; then
+ prog="/bin/su $user -s /bin/sh -c \""
+ fi
+ if [ "$fork" = "1" ]; then
+ prog="/usr/bin/setsid ${prog:-sh -c \"}"
+ fi
+ # If command to execute ends with quotation mark, add remaining
+ # arguments and close quotation.
+ if [ "$prog" != "${prog%\"}" ]; then
+ prog="$prog $*$end\""
+ else
+ prog="$prog $*$end"
+ fi
+
+ _daemon_set_ulimits
+
+ [ -z "$DEFAULT_SERVICE_UMASK" ] && DEFAULT_SERVICE_UMASK=022
+ [ -z "$DEFAULT_SERVICE_RUN_NICE_LEVEL" ] && DEFAULT_SERVICE_RUN_NICE_LEVEL=0
+
+ # And start it up.
+ busy
+ cd $chdir
+ [ -n "$SERVICE_CPUSET" ] && is_yes "$CPUSETS" && echo $$ > "/dev/cpuset/${SERVICE_CPUSET}/tasks"
+ if errors=$(
+ umask ${SERVICE_UMASK:-$DEFAULT_SERVICE_UMASK};
+ export USER=root HOME=/tmp TMPDIR=/tmp
+
+ nice=${nice:-$DEFAULT_SERVICE_RUN_NICE_LEVEL}
+ nice=${nice:-0}
+
+ # make nice level absolute, not to be dependant of nice level of shell where service started
+ nice=$(($nice - $(nice)))
+
+ if [ "$closefds" = 1 ]; then
+ exec 1>&-
+ exec 2>&-
+ exec 0<&-
+ elif [ "$redirfds" = 1 ]; then
+ exec 1>/dev/null
+ exec 2>/dev/null
+ exec 0</dev/null
+ else
+ exec 2>&1
+ exec 0</dev/null
+ fi
+
+ if is_no "$RC_LOGGING"; then
+ prog=$1; shift
+ if [ ! -x $prog ]; then
+ logger -t rc-scripts -p daemon.debug "daemon: Searching PATH for $prog, consider using full path in initscript"
+ local a o=$IFS
+ IFS=:
+ for a in $PATH; do
+ if [ -x $a/$prog ]; then
+ prog=$a/$prog
+ break
+ fi
+ done
+ IFS=$o
+ fi
+ set -- "$prog" "$@"
+
+ # use setsid to detach from terminal,
+ # needs pidfile or ssd would check setsid program instead of real program
+ if [ "$pidfile" ]; then
+ set -- /usr/bin/setsid "$@"
+ fi
+
+ prog=$1; shift
+ /sbin/start-stop-daemon -q --start \
+ --nicelevel $nice \
+ ${pidfile:+--pidfile $pidfile} \
+ ${makepid:+--make-pidfile} \
+ ${user:+--chuid $user} \
+ ${chdir:+--chdir "$chdir"} \
+ ${fork:+--background} \
+ ${SERVICE_DROPCAPS:+--dropcap $SERVICE_DROPCAPS} \
+ --exec "$prog" \
+ -- "$@"
+ else
+ nice -n $nice initlog -c "$prog" 2>&1 </dev/null
+ fi
+ ); then
+
+ # wait for process (or pidfile) to be created
+ if [ "$waittime" -gt 0 ]; then
+ # waitname can be empty, as if pidfile is in use, it is not relevant
+ waitproc "$waittime" "$waitname" "$pidfile"
+ fi
+ log_success "$1 startup"
+ ok
+ else
+ exit_code=1
+ fail
+ log_failed "$1 startup"
+ [ -n "$errors" ] && echo >&2 "$errors"
+ fi
+ return $exit_code
+}
+
+# wait (in seconds) for process (or pidfile) to be created
+# example: waitproc 30 httpd /var/run/httpd.pid
+waitproc() {
+ local waittime=$1 procname=$2 pidfile=$3
+ local pid
+ local now=$(date +%s)
+ local maxtime=$(($now + $waittime))
+
+ if [ -z "$procname" -a -z "$pidfile" ]; then
+ msg_usage "waitproc: procname or pidfile must be specified"
+ return 2
+ fi
+
+ while [ "$(date +%s)" -lt "$maxtime" ]; do
+ pid=$(pidofproc "$procname" "$pidfile")
+ [ -n "$pid" ] && break
+
+ # start-stop-daemon uses same delay
+ usleep 20000
+ done
+}
+
+# A function to stop a program.
+killproc() {
+ local notset killlevel base pid pidfile result delay=3 try
+ # Test syntax.
+ if [ $# = 0 ]; then
+ msg_usage " killproc [--pidfile|-p PIDFILE] [-d DELAY] {program} [-SIGNAME]"
+ return 2
+ fi
+
+ while [ "$1" != "${1##-}" ]; do
+ case $1 in
+ -d)
+ delay="$2"
+ shift 2
+ ;;
+ --pidfile|-p)
+ pidfile="$2"
+ case "$pidfile" in /*);; *) pidfile="/var/run/$pidfile";; esac
+ shift 2
+ ;;
+ --waitforname)
+ waitname="$2"
+ shift 2
+ ;;
+ --waitfortime)
+ waittime="$2"
+ shift 2
+ ;;
+ esac
+ done
+
+ busy
+
+ local notset=0
+ # check for second arg to be kill level
+ if [ -n "$2" ]; then
+ killlevel=$2
+ else
+ notset=1
+ fi
+
+ # experimental start-stop-daemon based killing.
+ # works only with pidfile
+ if is_no "$RC_LOGGING" && [ "$pidfile" ]; then
+ local sig=${killlevel:--TERM} retry
+ # do not retry if signal is specified,
+ # as otherwise impossible to send HUP if process pid stays in pidfile.
+ # however, do retry if --waitfortime was specified
+ if [ "${killlevel+set}" = "set" ] && [ -z "$waittime" ]; then
+ # if we send HUP it's ok if process does not die
+ retry="--oknodo"
+ else
+ local waitretry
+ : ${waittime=10}
+ : ${waitretry=$(($waittime * 2))}
+
+ # 1. kill with $sig, wait $delay
+ # 2. kill with $sig, wait $waittime
+ # 3. kill with KILL, wait $waitretry
+ retry="--retry ${sig#-}/${delay}/${sig#-}/${waittime}/KILL/${waitretry}"
+ fi
+ /sbin/start-stop-daemon -q --stop \
+ $retry \
+ ${waitname:+--name $waitname} \
+ -s ${sig#-} \
+ ${pidfile:+--pidfile $pidfile}
+ result=$?
+ if [ "$result" -eq 0 ]; then
+ ok
+ else
+ fail
+ fi
+ return $result
+ fi
+
+
+ # Save basename.
+ base=${1##*/}
+
+ # Find pid.
+ pid=$(pidofproc "$1" "$pidfile")
+ [ -z "$pid" ] && pid=$(pidofproc "$base" "$pidfile")
+
+ # Kill it.
+ if [ -n "$pid" -a "$pid" != "$$" ] && checkpid $pid 2>&1; then
+ if [ "$notset" = "1" ]; then
+ if checkpid $pid 2>&1; then
+ # TERM first, then KILL if not dead
+ kill -TERM $pid
+ usleep 50000
+
+ try=0
+ while [ $try -lt $delay ]; do
+ checkpid $pid || break
+ sleep 1
+ try=$((try+1))
+ done
+ if checkpid $pid; then
+ # XXX: SIGKILL is sent already on 4th second!
+ # HARMFUL for example to mysqld (which is already workarounded)
+ kill -KILL $pid
+ usleep 50000
+ fi
+ fi
+ checkpid $pid
+ result=$?
+ if [ "$result" -eq 0 ]; then
+ fail
+ log_failed "$1 shutdown"
+ else
+ ok
+ log_success "$1 shutdown"
+ fi
+ result=$(( ! $result ))
+ else
+ # use specified level only
+ if checkpid $pid > /dev/null 2>&1; then
+ kill $killlevel $pid
+ result=$?
+ if [ "$result" -eq 0 ]; then
+ ok
+ log_success "$1 got $killlevel"
+ else
+ result=7
+ fail
+ log_failed "$1 didn't get $killlevel"
+ fi
+ else
+ result=7
+ died
+ log_failed "$1 shutdown"
+ fi
+ fi
+ else
+ died
+ log_failed "$1 shutdown"
+ result=7
+ fi
+
+ if [ -n "$waitname" -a -n "$waittime" ]; then
+ # Save basename.
+ base=${waitname##*/}
+ # Find pid.
+ pid=$(pidofproc "$waitname" "$pidfile")
+ [ -z "$pid" ] && pid=$(pidofproc "$base" "$pidfile")
+ i=0
+ while [ "$i" -lt "$waittime" ]; do
+ i=$(( i + 1 ))
+ checkpid $pid && sleep 1 || break
+ done
+ fi
+
+ # Remove pid file if any.
+ if [ "$notset" = "1" ]; then
+ rm -f /var/run/${base}.pid
+ fi
+
+ return $result
+}
+
+# A function to find the pid of a program.
+pidofproc() {
+ local pid pidfile base=${1##*/}
+ pidfile="$base.pid"
+ [ -n "$2" ] && pidfile="$2"
+
+ # Test syntax.
+ if [ $# = 0 ]; then
+ msg_usage " pidofproc {program}"
+ return 2
+ fi
+
+ # First try pidfile or "/var/run/*.pid"
+ case "$pidfile" in
+ /*)pidfile="${pidfile}";;
+ *) pidfile="/var/run/$pidfile";;
+ esac
+ if [ -f "${pidfile}" ]; then
+ local p
+ for p in $(< "${pidfile}"); do
+ [ -z "$(echo "$p" | awk '{gsub(/[0-9]/,"");print;}')" ] && pid="$pid $p"
+ done
+ fi
+
+ # Next try "pidof" if pidfile is not specified
+ if [ -z "$pid" ] && [ -z "$pidfile" ]; then
+ pid=$(pidof -o $$ -o $PPID -o %PPID -x "$1")
+ fi
+
+ pid=$(filter_chroot $pid)
+ echo $pid
+}
+
+# status [--pidfile PIDFILE] {subsys} [{daemon}]"
+status() {
+ local pid subsys daemon cpuset_msg pidfile
+ if [ "$1" = "--pidfile" -o "$1" = "-p" ]; then
+ pidfile=$2
+ case "$pidfile" in /*);; *) pidfile="/var/run/$pidfile";; esac
+ shift 2
+ fi
+
+ subsys=$1
+ daemon=${2:-$subsys}
+
+ # Test syntax.
+ if [ $# = 0 ]; then
+ msg_usage " status [--pidfile PIDFILE] {subsys} [{daemon}]"
+ return 2
+ fi
+
+ # if pidfile specified, pid must be there
+ if [ "$pidfile" ]; then
+ [ -f "$pidfile" ] && read pid < $pidfile
+ # filter_chroot does not filter out dead pids, so this extra check, see t/status-pidfile.sh
+ if [ ! -d "/proc/$pid" ]; then
+ pid=
+ fi
+ else
+ pid=$(pidof -o $$ -o $PPID -o %PPID -x $daemon)
+ fi
+ pid=$(filter_chroot $pid)
+
+ if [ "$pid" ]; then
+ cpuset_msg="..."
+ if [ -n "$SERVICE_CPUSET" ] && is_yes "$CPUSETS"; then
+ if grep -q "$pid" "/dev/cpuset/${SERVICE_CPUSET}/tasks"; then
+ cpuset_msg=$(nls " in cpuset %s..." "$SERVICE_CPUSET")
+ else
+ cpuset_msg=$(nls " outside of configured cpuset %s..." "$SERVICE_CPUSET")
+ fi
+ fi
+ nls "%s (pid %s) is running%s" "$daemon" "$pid" "$cpuset_msg"
+ return 0
+ fi
+
+ # Next try "/var/run/*.pid" files; if pidfile is not set
+ local base=${daemon##*/}
+ if [ -z "$pidfile" -a -f /var/run/${base}.pid ]; then
+ read pid < /var/run/${base}.pid
+ pid=$(filter_chroot $pid)
+ if [ "$pid" ]; then
+ nls "%s dead but pid file (%s) exists" "$subsys" /var/run/${base}.pid
+ return 1
+ fi
+ fi
+
+ # See if /var/lock/subsys/$subsys exists
+ if [ -f /var/lock/subsys/$subsys ]; then
+ nls "daemon %s dead but subsys (%s) locked" "$daemon" "$subsys"
+ return 2
+ fi
+ nls "%s is stopped" "$subsys"
+ return 3
+}
+
+# Confirm whether we really want to run this service
+confirm() {
+ local answer
+ nls -n "Start service %s (Y)es/(N)o/(C)ontinue? [Y] " "$1"
+ read answer
+ case $answer in
+ y|Y|t|T|j|J|"")
+ return 0
+ ;;
+ c|C|k|K|w|W)
+ return 2
+ ;;
+ n|N)
+ return 1
+ ;;
+ *)
+ confirm $1
+ return $?
+ ;;
+ esac
+}
+
+# module is needed (ie. is requested, is available and isn't loaded already)
+is_module() {
+ # module name without .o at end
+ if ! lsmod | grep -q "$1"; then
+ if ls -1R /lib/modules/$(uname -r)/ 2> /dev/null | grep -q "^${1}.\(\|k\)o\(\|.gz\)"; then
+ # true
+ return 0
+ fi
+ fi
+ # false
+ return 1
+}
+
+_modprobe() {
+ local parsed single die args foo result
+ parsed=no
+ while is_no "$parsed"; do
+ case "$1" in
+ "single")
+ single=yes
+ shift
+ ;;
+ "die")
+ die=yes
+ shift
+ ;;
+ -*)
+ args="$args $1"
+ shift
+ ;;
+ *)
+ parsed=yes
+ ;;
+ esac
+ done
+ if is_yes "${single}"; then
+ foo="$@"
+ show "Loading %s kernel module(s)" "$foo"
+ busy
+ fi
+ if [ -x /sbin/modprobe ]; then
+ /sbin/modprobe -s $args "$@"
+ result=$?
+ else
+ deltext; fail
+ result=1
+ fi
+ if is_yes "${single}"; then
+ deltext
+ if [ $result = "0" ]; then
+ is_yes "$single" && ok
+ else
+ fail
+ if is_yes "$die"; then
+ nls "Could not load %s kernel module(s)" "$@"
+ exit 1
+ fi
+ fi
+ fi
+}
+
+if is_no "$RC_LOGGING"; then
+ log_success() {
+ :
+ }
+
+ log_failed() {
+ :
+ }
+else
+ log_success() {
+ initlog -n $0 -s "$1 $2" -e 1
+ }
+
+ log_failed() {
+ initlog -n $0 -s "$1 $2" -e 2
+ }
+fi
+
+# Check if any flavor of portmapper is running
+check_portmapper() {
+ if [ -x /usr/sbin/rpcinfo ]; then
+ if /usr/sbin/rpcinfo -p localhost >/dev/null 2>/dev/null; then
+ return 0
+ else
+ return 1
+ fi
+ elif [ -z "$(pidof portmap)" -a -z "$(pidof rpcbind)" ]; then
+ return 1
+ fi
+ return 0
+}
+
+# is_fsmounted fstype mntpoint
+# Check if filesystem fstype is mounted on mntpoint
+is_fsmounted() {
+ local fstype=$1
+ local mntpoint=$2
+
+ [ -n "$fstype" -a -n "$mntpoint" ] || return 1
+
+ if [ -r /proc/mounts ]; then
+ grep -qE "[[:blank:]]$mntpoint[[:blank:]]+$fstype[[:blank:]]" /proc/mounts
+ return $?
+ else
+ if [ "$(stat -L -f -c %T $mntpoint 2>/dev/null)" = "$fstype" ]; then
+ return 0
+ else
+ return 1
+ fi
+ fi
+}
+
+# __umount_loop awk_program fstab_file first_msg retry_msg umount_args
+# awk_program should process fstab_file and return a list of fstab-encoded
+# paths; it doesn't have to handle comments in fstab_file.
+__umount_loop() {
+ local remaining sig=
+ local retry=3 count
+
+ remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
+ while [ -n "$remaining" -a "$retry" -gt 0 ]; do
+ if [ "$retry" -eq 3 ]; then
+ run_cmd "$3" fstab-decode umount $5 $remaining
+ else
+ run_cmd "$4" fstab-decode umount $5 $remaining
+ fi
+ count=4
+ remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
+ while [ "$count" -gt 0 ]; do
+ [ -z "$remaining" ] && break
+ count=$(($count-1))
+ usleep 500000
+ remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
+ done
+ [ -z "$remaining" ] && break
+ fstab-decode /bin/fuser -k -m $sig $remaining >/dev/null
+ sleep 3
+ retry=$(($retry -1))
+ sig=-9
+ done
+}
+
+# Similar to __umount loop above, specialized for loopback devices
+__umount_loopback_loop() {
+ local remaining devremaining sig=
+ local retry=3
+
+ remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
+ devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
+ while [ -n "$remaining" -a "$retry" -gt 0 ]; do
+ if [ "$retry" -eq 3 ]; then
+ run_cmd "Unmounting loopback filesystems: " \
+ fstab-decode umount $remaining
+ else
+ run_cmd "Unmounting loopback filesystems (retry):" \
+ fstab-decode umount $remaining
+ fi
+ for dev in $devremaining ; do
+ losetup $dev > /dev/null 2>&1 && \
+ run_cmd "Detaching loopback device $dev: " \
+ losetup -d $dev
+ done
+ remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
+ devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
+ [ -z "$remaining" ] && break
+ fstab-decode /bin/fuser -k -m $sig $remaining >/dev/null
+ sleep 3
+ retry=$(($retry -1))
+ sig=-9
+ done
+}
+
+rc_cache_init() {
+ # If we have cachefile, use it.
+ # If we don't, create memory variables and try to save silently,
+ local cachefile='/var/cache/rc-scripts/msg.cache'
+
+ local term
+ if is_yes "$ISATTY"; then
+ term=$TERM
+ else
+ term=dumb
+ fi
+
+ # We create $check variable which is used to invalidate the cache.
+ # The $check contains user locale and terminal.
+ local check="$term.$LC_MESSAGES.$INIT_COL"
+
+ if [ -f "$cachefile" -a "$cachefile" -nt /etc/sysconfig/system -a "$cachefile" -nt /etc/sysconfig/init-colors ]; then
+ if . "$cachefile" 2>/dev/null; then
+ if [ "$check" = "$_check" ]; then
+ return
+ fi
+ fi
+ fi
+
+ # primitive caching
+ _busy=$(progress "BUSY" "$CBUSY")
+ _ok=$(progress "DONE")
+ _started=$(progress "WORK")
+ _fail=$(progress "FAIL" "$CFAIL")
+ _died=$(progress "DIED" "$CFAIL")
+
+ # we don't use heredoc, as ksh attempts to create tempfile then
+ (> "$cachefile" ) 2>/dev/null || return
+ echo "_busy='$_busy';" >> "$cachefile"
+ echo "_ok='$_ok';" >> "$cachefile"
+ echo "_started='$_started';" >> "$cachefile"
+ echo "_fail='$_fail';" >> "$cachefile"
+ echo "_died='$_died';" >> "$cachefile"
+ echo "_check='$check';" >> "$cachefile"
+}
+
+rc_gettext_init() {
+ if [ -z "$GETTEXT" ]; then
+ if [ -x /bin/gettext -o -x /usr/bin/gettext ]; then
+ GETTEXT=yes
+ else
+ GETTEXT=no
+ fi
+ fi
+
+ if [ -z "$TPUT" ]; then
+ if [ -d /usr/share/terminfo ] && [ -x /usr/bin/tput -o -x /bin/tput ]; then
+ TPUT=yes
+ # check if we are on proper terminal
+ tput longname >/dev/null 2>&1 || TPUT=no
+ else
+ TPUT=no
+ fi
+ fi
+}
+
+use_upstart () {
+ return 1
+}
+emit () {
+ return 0
+}
+is_upstart_task() {
+ return 1
+}
+is_upstart_running() {
+ return 1
+}
+upstart_start() {
+ return 1
+}
+upstart_stop() {
+ return 1
+}
+upstart_reload() {
+ return 0
+}
+upstart_status() {
+ return 1
+}
+_upstart_controlled() {
+ return 0
+}
+alias upstart_controlled='_upstart_controlled $0 "$@"'
+
+rc_gettext_init
+rc_cache_init
+
+#/*
+# * Local variables:
+# * mode: sh
+# * indent-tabs-mode: notnil
+# * End:
+# *
+# */
--- /dev/null
+#!/bin/sh - keep it for file(1) to get bourne shell script result
+#
+#
+# This is not a shell script; it provides functions to network scripts
+# that source it.
+
+source_config ()
+{
+ local foundconfig=0
+
+ DEVNAME=${CONFIG##*/}
+ DEVNAME=${DEVNAME##ifcfg-}
+ DEVNAME=${DEVNAME##tnlcfg-}
+
+ if [[ "$CONFIG" = /* ]]; then
+ if [ -f "$CONFIG" ]; then
+ . "$CONFIG"
+ foundconfig=1
+ fi
+ elif [ -f "/etc/sysconfig/interfaces/$CONFIG" ]; then
+ . "/etc/sysconfig/interfaces/$CONFIG"
+ foundconfig=1
+ fi
+
+ # This is sanity check so that if you've copied ifcfg-eth0 to ifcfg-eth1
+ # and forgot to alter DEVICE= line you won't accidentally bring down eth0
+ # while executing ifdown eth1. We do that only if configuration file exists
+ # (sometimes ifcfg-xyz isn't needed at all like server-side pppoe pppX interfaces)
+ if [ "$foundconfig" -eq "1" -a "$DEVICE" -a "$DEVNAME" != "$DEVICE" ]; then
+ echo >&2 "$0: DEVICE specified in $CONFIG does not match filename. Aborting!"
+ exit 1
+ fi
+
+ if [ "${PREFIX}" ] && [[ "$IPADDR" != */* ]]; then
+ IPADDR="$IPADDR/$PREFIX"
+ fi
+}
+
+do_netreport ()
+{
+ # Notify programs that have requested notification
+ ( cd /var/run/netreport || exit
+ for i in *; do
+ [ -f $i ] && kill -SIGIO $i >/dev/null 2>&1 || \
+ rm -f $i >/dev/null 2>&1
+ done
+ )
+}
+
+need_hostname()
+{
+ local hostname=$(hostname)
+ if [ "$hostname" = "(none)" -o "$hostname" = "localhost" -o "$hostname" = "localhost.localdomain" ]; then
+ NEEDHOSTNAME=yes
+ else
+ unset NEEDHOSTNAME
+ fi
+}
+
+set_hostname()
+{
+ local hostname domain
+
+ hostname=$(echo $1 | awk ' { gsub(/\..*$/,NIL); print $0; } ')
+ domain=$(echo $1 | awk ' { sub(/^[^\.]*\./,NIL); print $0; } ')
+
+ if [ "$hostname" ]; then
+ echo "$hostname" > /etc/HOSTNAME
+ hostname $hostname
+ fi
+
+ if [ "$domain" ]; then
+ # XXX umask and possible /etc/resolv.conf symlink breakage
+ > /etc/resolv.conf.new
+ if ! grep -Fq "search $domain" /etc/resolv.conf; then
+ echo "search $domain" >> /etc/resolv.conf.new
+ fi
+ echo "domain $domain" >> /etc/resolv.conf.new
+ grep -v "^domain " /etc/resolv.conf >> /etc/resolv.conf.new
+ mv -f /etc/resolv.conf.new /etc/resolv.conf
+ fi
+}
+
+set_dhcpclient()
+{
+ if [ "$BOOTPROTO" = "bootp" -o "$BOOTPROTO" = "pump" ]; then
+ DHCP_CLIENT=/sbin/pump
+ fi
+
+ if [ -z "$DHCP_CLIENT" ]; then
+ if [ "$BOOTPROTO" = "zeroconf" -a -x /usr/sbin/avahi-autoipd ]; then
+ DHCP_CLIENT=/usr/sbin/avahi-autoipd
+ elif [ -x /sbin/dhcpcd ]; then
+ DHCP_CLIENT=/sbin/dhcpcd
+ elif [ -x /sbin/dhclient ]; then
+ DHCP_CLIENT=/sbin/dhclient
+ elif [ -x /sbin/dhcpxd ]; then
+ DHCP_CLIENT=/sbin/dhcpxd
+ elif [ -x /sbin/pump ]; then
+ DHCP_CLIENT=/sbin/pump
+ elif [ "$BOOTPROTO" = "auto" -a -x /usr/sbin/avahi-autoipd ]; then
+ DHCP_CLIENT=/usr/sbin/avahi-autoipd
+ else
+ nls "Can't find a DHCP client."
+ exit 1
+ fi
+ fi
+}
+
+# Setup Network Address Translation (NAT)
+setup_nat()
+{
+ local src via dst
+
+ if [ -r /etc/sysconfig/static-nat ]; then
+ if [ "$1" = "on" ]; then
+ grep "^[0-9]" /etc/sysconfig/static-nat | while read src via dst; do
+ /sbin/ip route add nat $dst via $src
+ /sbin/ip rule add from $src nat $dst
+ done
+ elif [ "$1" = "off" ]; then
+ LC_ALL=C /sbin/ip route show table all | grep -E "^nat[[:blank:]]" | while read nat dst via src args; do
+ /sbin/ip rule del from $src nat $dst
+ /sbin/ip route del nat $dst via $src
+ done
+ fi
+ fi
+}
+
+# Setup static ARP
+static_arp()
+{
+ local rc arpdev host hwaddr flags neflags
+
+ if is_yes "$STATIC_ARP" && [ -r /etc/ethers ]; then
+ if [ -x /sbin/arp ]; then
+ run_cmd "Setting static ARP entries" /sbin/arp -f /etc/ethers
+ else
+ show "Setting static ARP entries"; busy
+ rc=0
+ arpdev=$(ip link show | awk -F':' '(/UP/) && ! (/NOARP/) && ! (/lo:/) && ! (/NONE:/) { print $2; exit }')
+ if [ -z "$arpdev" ]; then
+ rc=1
+ else
+ # ip supports only ip addresses
+ grep "^[0-9]" /etc/ethers | \
+ while read host hwaddr flags; do
+ case "$flags" in
+ *temp*)
+ neflags="nud stale"
+ ;;
+ *)
+ neflags="nud permanent"
+ ;;
+ esac
+ if ! /sbin/ip neigh add $host lladdr $hwaddr $neflags dev $arpdev; then
+ rc=1
+ fi
+ done
+ fi
+ if [ "$rc" -gt 0 ]; then
+ fail
+ fi
+ fi
+ fi
+}
+
+static_rarp()
+{
+ if is_yes "$STATIC_RARP"; then
+ if [ ! -e /proc/net/rarp ]; then
+ _modprobe single rarp
+ fi
+ if [ -r /etc/ethers -a -x /sbin/rarp ]; then
+ run_cmd "Setting static RARP entries" /sbin/rarp -f /etc/ethers
+ fi
+ fi
+}
+
+# Set up all IP && IP parameter variables
+setup_ip_param ()
+{
+ # detect network device type (ie. dummy, eth for dummy0, eth0 ..)
+ if [ -z "$DEVICETYPE" ]; then
+ # If there's a dot, it's a vlan
+ if echo ${DEVICE} | LC_ALL=C grep -qE '^[a-z0-9]+\.[0-9]+$'; then
+ DEVICETYPE=vlan
+ else
+ DEVICETYPE=$(echo $DEVICE | awk ' { gsub(/[\.:]?[0-9]*[\.:]?[0-9]*$/,NUL); print $0 } ')
+ fi
+ fi
+
+
+ # real name of device (ie. is eth0 for eth0,eth0:1,eth0:alias)
+ SUBDEVICE=$(echo "$DEVICE" | grep -E "([0-9]+:[0-9]+)")
+ DEVICE=$(echo $DEVICE | awk ' { gsub(/:.*$/,NUL); print $0 } ')
+
+ eval IP4ADDR="\$IPADDR${IP4_PRIM_IF:-}"
+ # check if ipaddr doesn't contain network length -- use $NETMASK then
+ if [[ "$IP4ADDR" != */* ]] && [ "$NETMASK" ]; then
+ IP4ADDR=$IP4ADDR/$(calcprefix $NETMASK)
+ fi
+
+ # check if we have ipv6 or ipv4 address
+ if [[ "${IP4ADDR}" = *:* ]]; then
+ IP6ADDR=${IP4ADDR}
+ IP4ADDR=""
+ else
+ eval IP4ADDROPT="\$IP_AOPTS${IP4_PRIM_IF:-}"
+ eval IP4ROUTEOPT="\$IP_ROPTS${IP4_PRIM_IF:-}"
+ fi
+ if [ "${IP6_PRIM_IF}" ]; then
+ eval IP6ADDR="\$IPADDR${IP6_PRIM_IF:-}"
+ eval IP6ADDROPT="\$IPV6_AOPTS${IP6_PRIM_IF:-}"
+ eval IP6ADDRLABEL="\$IP_LABEL${IP6_PRIM_IF:-}"
+ fi
+ if [ "${IP4_SRC_IF}" ]; then
+ eval IP4SRCADDR="\$IPADDR${IP4_SRC_IF}"
+ IP4SRCADDR=$(echo ${IP4SRCADDR} | awk ' { gsub(/\/.*/,NIL); print "src " $0; } ')
+ fi
+
+ # new rc-scripts 0.4.x option
+ if [ -z "$HANDLING" ]; then
+ HANDLING=0
+ fi
+
+ # set handling for bridge
+ case "$DEVICETYPE" in
+ br|atm|lec|irda|vlan)
+ HANDLING=1
+ ;;
+ esac
+
+ # Multicast ready devices
+ if is_yes "$MULTICAST"; then
+ MULTICAST="on"
+ else
+ case "$DEVICETYPE" in
+ eth|br)
+ MULTICAST="on"
+ ;;
+ *)
+ MULTICAST="off"
+ ;;
+ esac
+ fi
+
+ # ARP ready devices
+ if [ "$ARP" ]; then
+ if is_yes "$ARP"; then
+ ARP="arp on"
+ else
+ ARP="arp off"
+ fi
+ fi
+}
+
+check_device_down ()
+{
+ if LC_ALL=C ip link show dev ${DEVICE} 2> /dev/null | grep -Fq UP; then
+ return 1
+ else
+ return 0
+ fi
+}
+
+setup_ip_gw_ro ()
+{
+ # IPv4 gateway
+ if is_yes "$IPV4_NETWORKING"; then
+ if [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
+ # set up default gateway
+ if [ "${GATEWAY}" ]; then
+ ip -4 route add default via ${GATEWAY} dev ${DEVICE} ${IP4SRCADDR} onlink 2>/dev/null
+ if [ $? = 0 ]; then
+ DEFGW=${GATEWAY}
+ else
+ # The default gateway could be set via eth0, while bringing up eth1 we shouldn't set default gateway again.
+ # To prevent this message just set GATEWAYDEV=eth0 in /etc/sysconfig/network.
+ nls "Warning: Default gateway already set proably via other interface. Do you need to setup GATEWAYDEV?"
+ fi
+ elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then
+ ip -4 route add default dev ${DEVICE} ${IP4SRCADDR}
+ fi
+ fi
+ fi
+
+ # IPv6 gateway && IPv6 globalroute
+ if is_yes "$IPV6_NETWORKING"; then
+ if [ -z "${GATEWAY6DEV}" -o "${GATEWAY6DEV}" = "${DEVICE}" ]; then
+ # set up default gateway
+ if [ "${GATEWAY6}" ]; then
+ ip -6 route add default via ${GATEWAY6} dev ${DEVICE} ${IP6SRCADDR} onlink
+ DEFGW6=${GATEWAY6}
+ elif [ "${GATEWAY6DEV}" = "${DEVICE}" ]; then
+ ip -6 route add default dev ${DEVICE} ${IP6SRCADDR}
+ fi
+ fi
+ if [ -z "${IPV6_GLOBALROUTEDEV}" -o "${IPV6_GLOBALROUTEDEV}" = "${DEVICE}" ]; then
+ # set up default route
+ if [ "${IPV6_GLOBALROUTEGW}" ]; then
+ ip -6 route add 2000::/3 via ${IPV6_GLOBALROUTEGW} dev ${DEVICE} ${IP6SRCADDR} onlink
+ elif [ "${IPV6_GLOBALROUTEDEV}" = "${DEVICE}" ]; then
+ ip -6 route add 2000::/3 dev ${DEVICE} ${IP6SRCADDR}
+ fi
+ fi
+ fi
+}
+
+#
+# following function sets up routes not associated to any device
+# eg. unreachable or blackhole routes
+# (c) 1999 Jacek Konieczny <jajcus@pld-linux.org>
+#
+setup_routes()
+{
+ local args
+
+ if [ -f /etc/sysconfig/static-routes ]; then
+ if [ "$1" = "on" -o "$1" = "yes" ]; then
+ grep -E "^(none|any)[[:blank:]]" /etc/sysconfig/static-routes | while read device args; do
+ /sbin/ip route add $args
+ done
+ else
+ grep -E "^(none|any)[[:blank:]]" /etc/sysconfig/static-routes | while read device args; do
+ /sbin/ip route del $args 2>/dev/null
+ done
+ fi
+ fi
+ is_no "$IPV6_NETWORKING" && return
+ if [ -f /etc/sysconfig/static-routes6 ]; then
+ if [ "$1" = "on" -o "$1" = "yes" ]; then
+ grep -E "^(none|any)[[:blank:]]" /etc/sysconfig/static-routes6 | while read device args; do
+ /sbin/ip -6 route add $args
+ done
+ else
+ grep -E "^(none|any)[[:blank:]]" /etc/sysconfig/static-routes6 | while read device args; do
+ /sbin/ip -6 route del $args 2>/dev/null
+ done
+ fi
+ fi
+}
+
+# Add ONLY IPv4 address (IPv6 address is added automaticly)
+set_up_loopback()
+{
+ if is_yes "$IPV4_NETWORKING"; then
+ ip addr add 127.0.0.1/8 dev lo
+ fi
+ ip link set dev lo up
+
+ grep -E "^(lo|any)[[:blank:]]" /etc/sysconfig/static-routes | while read device args; do
+ if [[ "$args" = *:* ]]; then
+ is_no "$IPV6_NETWORKING" && continue
+ else
+ is_no "$IPV4_NETWORKING" && continue
+ fi
+ /sbin/ip route add $args dev lo
+ done
+ is_no "$IPV6_NETWORKING" && return
+ grep -E "^(lo|any)[[:blank:]]" /etc/sysconfig/static-routes6 | while read device args; do
+ /sbin/ip -6 route add $args dev lo
+ done
+}
+
+set_down_loopback()
+{
+ LC_ALL=C ip addr flush dev lo 2>&1 | grep -v "Nothing to flush"
+ ip link set dev lo down
+}
+
+modprobe_net()
+{
+ if is_yes "$IPV6_NETWORKING" && is_module "ipv6"; then
+ _modprobe single ipv6
+ fi
+
+ if is_yes "$IPX" && is_module "ipx"; then
+ _modprobe single ipx
+ fi
+}
+
+# calculate network prefix from given network mask
+calcprefix()
+{
+ local old_IFS netmask prefix endp
+
+ old_IFS=$IFS
+ IFS='.'
+ netmask=$(echo $1)
+ IFS=$old_IFS
+
+ prefix=0
+ endp=0
+ for n in $netmask; do
+ for i in 128 64 32 16 8 4 2 1; do
+ if [ $(($n & $i)) -ne 0 ]; then
+ if [ $endp -eq 0 ]; then
+ prefix=$(($prefix + 1))
+ else
+ echo "32"
+ return
+ fi
+ else
+ endp=1
+ fi
+ done
+ done
+ echo $prefix
+}
+
+# calculate network mask from given prefix
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+calcnetmask()
+{
+ local prefix a MASK
+
+ MASK=""
+ if [ "${1##[0-9]*}" ]; then
+ prefix=32
+ else
+ prefix=$1
+ fi
+ for i in 1 2 3 4; do
+ case $prefix in
+ 7) a=254;;
+ 6) a=252;;
+ 5) a=248;;
+ 4) a=240;;
+ 3) a=224;;
+ 2) a=192;;
+ 1) a=128;;
+ *)
+ [ $prefix -ge 8 ] && a=255
+ [ $prefix -le 0 ] && a=0
+ ;;
+ esac
+
+ prefix="$(( $prefix - 8))"
+ if [ -z "$MASK" ]; then
+ MASK=$a
+ else
+ MASK=$MASK.$a
+ fi
+ done
+
+ echo $MASK
+ return
+}
+
+# Retrievies PPPD PID and real interface name from /var/run/ppp-*.pid
+get_ppp_device_and_pid ()
+{
+ if [ -f "/var/run/ppp-$DEVNAME.pid" ]; then
+ eval $(
+ {
+ read PID; echo "PID='$PID'"
+ read REALDEVICE; echo "REALDEVICE=$REALDEVICE"
+ } < "/var/run/ppp-$DEVNAME.pid")
+ fi
+
+ if [ -z "$REALDEVICE" ]; then
+ REALDEVICE=$DEVICE
+ fi
+}
+
+# following function setups advanced routing rules
+# Olgierd Pieczul <wojrus@pld-linux.org>
+setup_ip_rules ()
+{
+ local args prio from src i prio
+
+ if [ -f /etc/sysconfig/static-routes ]; then
+ if is_yes "$1"; then
+ i=10000
+ grep -E "^(from|to|iif|tos|fwmark|dev|pref|priority|prio)[[:blank:]]" /etc/sysconfig/static-routes | while read args; do
+ prio=""
+ if [ "${args##* prio }" = "$args" ]; then
+ # no "prio" used in rule, use own prio
+ prio="prio $i"
+ i=$((i + 5))
+ fi
+ /sbin/ip rule add $args $prio
+ done
+ elif is_no "$1"; then
+ LC_ALL=C /sbin/ip rule show | grep -vE -e "from all lookup (main|default|local|253|254|255) \$" -e " map-to " | while read prio from src args; do
+ [ "$src" = "all" ] && /sbin/ip rule delete $args || /sbin/ip rule delete $from $src $args
+ done
+ fi
+ fi
+ is_no "$IPV6_NETWORKING" && return
+ if [ -f /etc/sysconfig/static-routes6 ]; then
+ if is_yes "$1"; then
+ i=10000
+ grep -E "^(from|to|iif|tos|fwmark|dev|pref|priority|prio)[[:blank:]]" /etc/sysconfig/static-routes6 | while read args; do
+ prio=""
+ if [ "${args##* prio }" = "$args" ]; then
+ # no "prio" used in rule, use own prio
+ prio="prio $i"
+ i=$((i + 5))
+ fi
+ /sbin/ip -6 rule add $args $prio
+ done
+ elif is_no "$1"; then
+ LC_ALL=C /sbin/ip -6 rule show | grep -vE -e "from all lookup (main|default|local|253|254|255) \$" -e " map-to " | while read prio from src args; do
+ [ "$src" = "all" ] && /sbin/ip -6 rule delete $args || /sbin/ip -6 rule delete $from $src $args
+ done
+ fi
+ fi
+}
+
+is_wireless_device ()
+{
+ if [ -x /sbin/iwconfig ]; then
+ LC_ALL=C iwconfig "${1}" 2>&1 | grep -Fq "no wireless extensions" || return 0
+ fi
+ return 1
+}
+
+wireless_param()
+{
+ device="$1"
+ if [ "$2" = "br" ]; then
+ prefix="${device}_"
+ else
+ prefix=""
+ fi
+
+ local val wlan_mode
+
+ # wlan mode needs to be first
+ wlan_mode="$(eval echo \$${prefix}WLAN_MODE)" && [ "$wlan_mode" ] && \
+ iwconfig ${device} mode "$wlan_mode"
+
+ val="$(eval echo \$${prefix}WLAN_NICKNAME)" && [ "$val" ] && \
+ iwconfig ${device} nick "$val"
+
+ val="$(eval echo \$${prefix}WLAN_NWID)" && [ "$val" ] && \
+ iwconfig ${device} nwid "$val"
+
+ if [ "$wlan_mode" != "Managed" -a "$wlan_mode" != "managed" ]; then
+ if val="$(eval echo \$${prefix}WLAN_FREQ)" && [ "$val" ]; then
+ iwconfig ${device} freq "$val"
+ elif val="$(eval echo \$${prefix}WLAN_CHANNEL)" && [ "$val" ]; then
+ iwconfig ${device} channel "$val"
+ fi
+ fi
+
+ val="$(eval echo \$${prefix}WLAN_SENS)" && [ "$val" ] && \
+ iwconfig ${device} sens "$val"
+ val="$(eval echo \$${prefix}WLAN_AP)" && [ "$val" ] && \
+ iwconfig ${device} ap "$val"
+ val="$(eval echo \$${prefix}WLAN_BITRATE)" && [ "$val" ] && \
+ iwconfig ${device} rate "$val"
+ val="$(eval echo \$${prefix}WLAN_RTS_THRESHOLD)" && [ "$val" ] && \
+ iwconfig ${device} rts "$val"
+ val="$(eval echo \$${prefix}WLAN_FRAGMENTATION_THRESHOLD)" && [ "$val" ] && \
+ iwconfig ${device} frag "$val"
+
+ local wlan_encryption="$(eval echo \$${prefix}WLAN_ENCRYPTION)"
+ local wlan_key="$(eval echo \$${prefix}WLAN_KEY)"
+ # TODO: well, actually shouldn't set WLAN_KEY if other keys than current are set
+ if [ "$wlan_key" ]; then
+ # wlan key can contain index of key to set
+ # to set other than current keys suffix with 1-4:
+ local idx
+ for idx in 1 2 3 4; do
+ val="$(eval echo \$${prefix}WLAN_KEY_$idx)"
+ [ "$val" ] || continue
+ iwconfig ${device} key "[$idx]" "$val"
+ done
+ if val="$(eval echo \$${prefix}WLAN_KEY_CURRENT)" && [ "$val" ]; then
+ iwconfig ${device} key "[$val]"
+ else
+ iwconfig ${device} key "$wlan_key"
+ fi
+
+ [ "$wlan_encryption" ] && iwconfig ${device} key "$wlan_encryption"
+ fi
+
+ if is_no "$wlan_encryption"; then
+ iwconfig ${device} key off
+ fi
+ val="$(eval echo \$${prefix}WLAN_POWER)" && [ "$val" ] && \
+ iwconfig ${device} power "$val"
+ val="$(eval echo \$${prefix}WLAN_TXPOWER)" && [ "$val" ] && \
+ iwconfig ${device} txpower "$val"
+ val="$(eval echo \$${prefix}WLAN_RETRY)" && [ "$val" ] && \
+ iwconfig ${device} retry "$val"
+
+ # essid should be last due to network rescanning by wlan devices
+ val="$(eval echo \$${prefix}WLAN_ESSID)" && [ "$val" ] && \
+ iwconfig ${device} essid "$val"
+
+ if is_yes "$(eval echo \$${prefix}WLAN_COMMIT)"; then
+ iwconfig ${device} commit
+ fi
+}
+
+# returns
+# 0 - no link
+# 1 - link ok
+# 2 - unsupported, unknown return
+check_mii_tool ()
+{
+ [ -x /sbin/mii-tool ] || return 2
+ local output=$(LC_ALL=C mii-tool $1 2>&1)
+ echo $output | grep -Fq "link ok" && return 1
+ echo $output | grep -Fq "no link" && return 0
+ return 2
+}
+
+# returns
+# 0 - link off
+# 1 - link on
+# 2 - unsupported, unknown return
+check_ethtool ()
+{
+ [ -x /sbin/ethtool ] || return 2
+ local output=$(LC_ALL=C ethtool $1 2>&1)
+ echo $output | grep -Fq "Link detected: yes" && return 1
+ echo $output | grep -Fq "Link detected: no" && return 0
+ return 2
+}
+
+# returns
+# 0 - radio off
+# 1 - radio on
+# 2 - unsupported
+check_iwconfig ()
+{
+ local output
+ # rfkill state (are there devices with multiple rfkill buttons?)
+ output=$(cat /sys/class/net/${1}/device/rfkill*/state 2> /dev/null)
+ # 1 is rfkill not active
+ [ "$output" = "1" ] && return 1
+ [ "$output" = "0" -o "$output" = "2" ] && return 0
+ [ -x /sbin/iwconfig ] || return 2
+ output=$(LC_ALL=C iwconfig "$1" 2>&1)
+ # "radio off" is ipwxxx only "feature" (and there is no "radio on")
+ echo "$output" | grep -Fq "radio off" && return 0
+ # XXX: need more generic checks for wifi
+ return 2
+}
+
+# returns
+# 0 - link down
+# 1 - link up
+# 2 - unknown/unsupported
+check_link_down ()
+{
+ local e i m timeout device max_timeout
+ device="$1"
+ max_timeout="$2"
+
+ if [ ! -x /sbin/mii-tool -a ! -x /sbin/ethtool -a ! -x /sbin/iwconfig ]; then
+ return 2
+ fi
+
+ [ -z "$max_timeout" ] && max_timeout=10
+
+ if ! LC_ALL=C ip link show dev $device 2>/dev/null | grep -Fq UP; then
+ ip link set dev $device up >/dev/null 2>&1
+ fi
+ timeout=0
+ while [ $timeout -le $max_timeout ]; do
+ check_ethtool $device
+ e=$?
+ check_iwconfig $device
+ i=$?
+ # trust ethtool and iwconfig
+ if [ $i -eq 1 ] || [ $e -eq 1 ]; then
+ return 1
+ fi
+ # use mii check only if all other check are unsupported
+ # (mii check lies too often)
+ check_mii_tool $device
+ m=$?
+ if [ $m -eq 1 ] && [ $i -eq 2 ] && [ $e -eq 2 ]; then
+ return 1
+ fi
+ usleep 500000
+ timeout=$((timeout+1))
+ done
+ # do not abort dhclient if all the checks are unsupported
+ if [ $m -eq 2 ] && [ $i -eq 2 ] && [ $e -eq 2 ]; then
+ return 2
+ fi
+ return 0
+}
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+# Will be removed in the future
+if is_yes "$NETWORKING" ; then
+ if [ -z "$IPV4_NETWORKING" ] ; then
+ echo "NETWORKING is set to YES, but IPV4_NETWORKING is empty!"
+ echo "Please upgrade your config"
+ echo "Assuming you want IPv4 networking"
+ IPV4_NETWORKING=yes
+ fi
+fi
+
+DEV=$1
+
+[ -z "$DEV" ] && {
+ nls "Usage: %s <device name>" "ifdown" >&2
+ exit 1
+}
+
+if [ -f "/etc/sysconfig/interfaces/ifcfg-$DEV" ] ; then
+ CONFIG="/etc/sysconfig/interfaces/ifcfg-$DEV"
+else
+ CONFIG="$DEV"
+fi
+
+if [ "$(id -u)" != "0" ]; then
+ if [ -x /sbin/usernetctl ]; then
+ exec /sbin/usernetctl $CONFIG down
+ fi
+ echo "Users cannot control this device." >&2
+ exit 1
+fi
+
+source_config
+
+# set all major variables
+setup_ip_param
+
+OTHERSCRIPT="/lib/rc-scripts/ifdown-${DEVICETYPE}"
+
+# shutdown tleds software
+if [ "$TLEDS_DEV" = "$DEVICE" -a -x /usr/bin/tleds ]; then
+ /usr/bin/tleds -qk "$DEVICE"
+fi
+
+if [ -x $OTHERSCRIPT ]; then
+ if [ "$HANDLING" = "0" ]; then
+ exec $OTHERSCRIPT $CONFIG $2
+ elif [ "$HANDLING" = "1" ]; then
+ $OTHERSCRIPT $CONFIG $2
+ fi
+fi
+
+if is_yes "$ENABLE_6TO4"; then
+ tun6to4=tun6to4_$DEVICE
+ /sbin/ip -6 route flush dev $tun6to4 2>/dev/null
+ if [ $? = 0 ]; then # the tunnel has been set up in ifup
+ /sbin/ip link set dev $tun6to4 down
+ /sbin/ip tunnel del $tun6to4
+ fi
+fi
+
+if [ -n "$BOOTPROTO" -a "$BOOTPROTO" != "none" -a "$BOOTPROTO" != "static" ]; then
+ if is_yes "$IPV4_NETWORKING"; then
+ set_dhcpclient
+
+ case ${DHCP_CLIENT##*/} in
+ pump)
+ $DHCP_CLIENT -r -i ${DEVICE}
+ RESULT=$?
+ ;;
+ dhcpcd)
+ $DHCP_CLIENT -k ${DEVICE}
+ RESULT=$?
+ sleep 1
+ ;;
+ dhcpxd)
+ $DHCP_CLIENT -k ${DEVICE}
+ RESULT=$?
+ ;;
+ dhclient)
+ if [ -f "/var/run/dhclient.$DEVICE.pid" ] ; then
+ $DHCP_CLIENT -r -pf /var/run/dhclient.$DEVICE.pid -lf /var/lib/dhclient/dhclient.$DEVICE.leases 2>/dev/null
+ RESULT=$?
+ elif [ -f /var/run/dhclient.pid ]; then
+ # may be left by older rc-scripts
+ PID=$(cat /var/run/dhclient.pid)
+ if kill -0 $PID 2>/dev/null; then
+ kill $PID
+ RESULT=$?
+ fi
+ fi
+ ;;
+ avahi-autoipd)
+ $DHCP_CLIENT -k ${DEVICE}
+ RESULT=$?
+ ;;
+ esac
+ fi
+fi
+
+if is_yes "${WLAN_WPA}"; then
+ killproc --pidfile "wpa_supplicant-${DEVICE}.pid" wpa_supplicant > /dev/null 2>&1
+ rm -f "/var/run/wpa_supplicant-${DEVICE}.pid"
+fi
+
+# Check to make sure the device is actually up
+check_device_down && exit 0
+
+if [ -n "${SUBDEVICE}" ]; then
+ ip addr del ${IP4ADDR} label ${SUBDEVICE} dev ${DEVICE}
+else
+ LC_ALL=C ip addr flush dev ${DEVICE} 2>&1 | grep -v "Nothing to flush"
+
+ if is_yes "$SLAVE"; then
+ ip link set ${DEVICE} nomaster
+ fi
+
+ ip link set ${DEVICE} down
+fi
+
+if [ "$HANDLING" = "4" ]; then
+ exit 0
+fi
+
+if [ -n "$RESULT" ] ; then
+ if [ "$RESULT" -ne "0" ]; then
+ exit $RESULT
+ fi
+fi
+
+exec /lib/rc-scripts/ifdown-post $CONFIG
--- /dev/null
+#!/bin/sh
+#
+# ifdown-br - bridge configuration script
+# Copyright (C) 2000 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+if [ ! -x /sbin/brctl ]; then
+ nls "%s is missing. Can't continue." "/sbin/brctl"
+ exit 1
+fi
+
+# set all major variables
+setup_ip_param
+
+# set device down and forget all addresses
+for device in ${BRIDGE_DEVS}; do
+ LC_ALL=C ip addr flush dev ${device} 2>&1 | grep -v "Nothing to flush"
+ brctl delif ${DEVICE} ${device}
+done
+
+ip link set ${DEVICE} down
+brctl delbr ${DEVICE}
--- /dev/null
+#!/bin/sh
+#
+# ifdown-irda - IrDA configuration script
+# Copyright (C) 2001 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+. /etc/sysconfig/network
+
+# set all major variables
+setup_ip_param
+
+ip link set ${DEVICE} down
+ip addr flush dev ${DEVICE} 2>&1 | grep -v "Nothing to flush"
+
+PID=$(pidof irattach)
+for x in $PID; do
+ if grep -q "$MODEMPORT" /proc/$x/cmdline; then
+ logger -p daemon.info -t ifdown-sl "signal TERM send to \"$(ps -o cmd=$x)\" - this should be irattach"
+ kill -TERM $x
+ PID=$x
+ fi
+done
+
+if [ -z "$PID" ]; then
+ exit 1
+fi
+
+kill $PID > /dev/null 2>&1
+if [ ! -d /proc/$PID ]; then
+ /lib/rc-scripts/ifdown-post $1
+ exit 0
+fi
+sleep 2
+if [ ! -d /proc/$PID ]; then
+ /lib/rc-scripts/ifdown-post $1
+ exit 0
+fi
+
+kill -KILL $PID > /dev/null 2>&1
+if [ -d /proc/$PID ]; then
+ logger -p daemon.info -t ifdown-irda "$(nls 'ifdown-%s unable to kill %s for %s' "irda" "irattach" "$DEVICE")" &
+else
+ /lib/rc-scripts/ifdown-post $1
+fi
+
+exit 1
--- /dev/null
+#!/bin/sh
+#
+#
+# This should be called whenever an interface goes down, not just when
+# it is brought down explicitly.
+
+run_down() { :; }
+
+CONFIG=$1
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+source_config
+
+# set all major variables
+setup_ip_param
+
+# set REALDEVICE
+get_ppp_device_and_pid
+
+# (QoS) Delete root queueing discipline
+if [ -n "${BANDWIDTH_OUT}" ]; then
+ if [ "${QDISC_CLASS}" = "htb" -o "${QDISC_CLASS}" = "cbq" ]; then
+ tc qdisc del dev ${REALDEVICE} root
+ elif [ -z "${QDISC}" -o "${QDISC}" = "tbf" ]; then
+ tc qdisc del dev ${REALDEVICE} root
+ elif [ -n "${QDISC}" ]; then
+ tc qdisc del dev ${REALDEVICE} root
+ fi
+else
+ if [ -n "${QDISC}" ]; then
+ tc qdisc del dev ${REALDEVICE} root
+ fi
+fi
+
+if [ -n "${BANDWIDTH_IN}" ]; then
+ tc qdisc del dev ${REALDEVICE} ingress
+fi
+
+# execute run_down() function (if available in device configuration file)
+run_down
+
+# Notify programs that have requested notification
+do_netreport
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ ! -f /var/run/ppp-$DEVNAME.pid ]; then
+ # ppp isn't running, or we didn't start it
+ exit 0
+fi
+
+# set all major variables
+setup_ip_param
+get_ppp_device_and_pid
+
+if [ -z "$PID" ]; then
+ exit 1
+fi
+
+rm -f /var/run/ppp-$DEVNAME.pid
+
+[ ! -d /proc/${PID} ] && exit 0
+
+kill -TERM ${PID} > /dev/null 2>&1
+
+sleep 2
+[ -d /proc/${PID} ] && sleep 2 && [ -d /proc/${PID} ] && sleep 5
+
+if [ -d /proc/${PID} ]; then
+ kill -KILL ${PID} > /dev/null 2>&1
+ logger -p daemon.info -t ifdown-ppp "ifdown-ppp unable to nicely kill pppd-$DEVICE (pppd-$DEVNAME)" &
+fi
+
+# Special cases
+if is_yes "${PPPOA_EAGLE}"; then
+ EAGLECTRL="/usr/sbin/adictrl"
+ if [ ! -x $EAGLECTRL ]; then
+ EAGLECTRL="/usr/sbin/eaglectrl"
+ fi
+ if [ -x $EAGLECTRL ]; then
+ PPPOA_IFACE=$( $EAGLECTRL -i 2>/dev/null)
+ [ -n "$PPPOA_IFACE" ] && ip link set "$PPPOA_IFACE" down
+ fi
+fi
+
+/lib/rc-scripts/ifdown-post $1
+
+exit 1
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+# set all major variables
+setup_ip_param
+
+# signals ifup-sl not to persist
+rm -f /var/run/sl-$DEVICE.dev
+
+# we can use dip or direct slip connection via slattach
+if is_no "$DIRECT_CONNECT"; then
+ PID=$(pidof dip-$DEVICE)
+else
+ PID=$(pidof slattach)
+ for x in $PID; do
+ if grep -q "$MODEMPORT" /proc/$x/cmdline; then
+ logger -p daemon.info -t ifdown-sl \
+ "signal TERM send to \"$(ps -o cmd= $x)\" - this should be slattach"
+ kill -TERM $x
+ PID=$x
+ fi
+ done
+fi
+#
+# The proctitle for connected dip daemons is actually "-dip (ipaddr)"
+# with ipaddr = local on dial-out, remote on dial-in
+# Grab the PID of connected dial-out daemon.
+#
+if [ -z "$PID" ]; then
+ PID=$(pidof -- -dip\ \($IPADDR\))
+fi
+if [ -z "$PID" ]; then
+ exit 1
+fi
+
+kill $PID > /dev/null 2>&1
+if [ ! -d /proc/$PID ]; then
+ /lib/rc-scripts/ifdown-post $1
+ exit 0
+fi
+sleep 2
+if [ ! -d /proc/$PID ]; then
+ /lib/rc-scripts/ifdown-post $1
+ exit 0
+fi
+
+kill -KILL $PID > /dev/null 2>&1
+if [ -d /proc/$PID ]; then
+ logger -p daemon.info -t ifdown-sl "ifdown-sl unable to kill sl-$DEVICE" &
+else
+ /lib/rc-scripts/ifdown-post $1
+fi
+
+exit 1
--- /dev/null
+#!/bin/sh
+#
+# ifdown-vlan - Virtual LAN configuration script
+# Copyright (C) 2001 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit 0
+fi
+
+# set all major variables
+setup_ip_param
+
+ip link set ${DEVICE} down
+LC_ALL=C ip addr flush dev ${DEVICE} 2>&1 | grep -v "Nothing to flush"
+
+if LC_ALL=C ip link help 2>&1 | grep -q del; then
+ /sbin/ip link del ${DEVICE}
+elif [ -x /sbin/vconfig ]; then
+ /sbin/vconfig rem ${DEVICE}
+else
+ nls "/sbin/vconfig or iproute2 with vlan support is missing. Can't continue."
+ exit 1
+fi
+
+RESULT=$?
+
+exit $RESULT
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+# Will be removed in the future
+if is_yes "$NETWORKING"; then
+ if [ -z "$IPV4_NETWORKING" ]; then
+ echo "NETWORKING is set to YES, but IPV4_NETWORKING is empty!"
+ echo "Please upgrade your config"
+ echo "Assuming you want IPv4 networking"
+ IPV4_NETWORKING=yes
+ export IPV4_NETWORKING
+ fi
+fi
+
+need_hostname
+
+# device name must be ifcfg-somename
+DEV=$1
+
+[ -z "$DEV" ] && {
+ nls "Usage: %s <device name>" "ifup" >&2
+ exit 1
+}
+
+if [ $(id -u) != 0 ]; then
+ if [ -x /sbin/usernetctl ]; then
+ exec /sbin/usernetctl $DEV up
+ fi
+ nls "Users cannot control this device." >&2
+ exit 1
+fi
+
+if [ -f "/etc/sysconfig/interfaces/ifcfg-$DEV" ]; then
+ CONFIG="/etc/sysconfig/interfaces/ifcfg-$DEV"
+elif [ -f "/etc/sysconfig/interfaces/$DEV" ]; then
+ CONFIG="/etc/sysconfig/interfaces/$DEV"
+else
+ CONFIG="$DEV"
+fi
+
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+if [ "foo$2" = "foohotplug" ] && ! is_yes "${HOTPLUG}"; then
+ exit
+fi
+
+if [ "foo$2" = "foopcmcia-hotplug" ] && ! is_yes "${PCMCIA_HOTPLUG}"; then
+ exit
+fi
+
+IPSETUP=no
+
+# set all major variables
+setup_ip_param
+
+SYSCTLDEVICE=$(echo ${DEVICE} | sed 's/\./\//g')
+
+OTHERSCRIPT="/lib/rc-scripts/ifup-${DEVICETYPE}"
+
+if [ -x "$OTHERSCRIPT" ]; then
+ if is_yes "$DEFAULTHANDLING"; then
+ HANDLING=1
+ fi
+ if [ "$HANDLING" = "0" ]; then
+ exec $OTHERSCRIPT $CONFIG $2
+ elif [ "$HANDLING" = "1" ]; then
+ $OTHERSCRIPT $CONFIG $2
+ fi
+fi
+
+if [ -n "$MACVLAN_DEV" -a -n "$MACVLAN_MACADDR" ]; then
+ ip link del link ${MACVLAN_DEV} ${DEVICE} type macvlan > /dev/null 2>&1
+ ip link add link ${MACVLAN_DEV} address ${MACVLAN_MACADDR} name ${DEVICE} type macvlan
+fi
+
+# is this device available? (this catches PCMCIA devices for us)
+if ! /sbin/ip link set multicast ${MULTICAST} dev ${DEVICE} > /dev/null 2>&1; then
+ nls "Delaying %s initialization" ${DEVICE}
+ exit 1
+fi
+
+if [ -n "$MACADDR" ]; then
+ ip link set ${DEVICE} address ${MACADDR}
+fi
+
+ip link set ${DEVICE} multicast ${MULTICAST} ${ARP} down
+
+if [ -n "$MTU" ]; then
+ ip link set ${DEVICE} mtu ${MTU}
+fi
+
+if is_yes "${IPV6_NETWORKING}" && is_yes "${IPV6_DISABLE_AUTOCONF}"; then
+ run_cmd "Disabling IPv6 autoconfiguration" sysctl -w net.ipv6.conf.${SYSCTLDEVICE}.autoconf=0
+fi
+
+if is_wireless_device "${DEVICE}"; then
+ is_yes "${WLAN_UPEARLY}" && ip link set ${DEVICE} up
+ wireless_param ${DEVICE}
+fi
+
+if is_yes "${WLAN_WPA}"; then
+ /usr/sbin/wpa_supplicant -D ${WLAN_WPA_DRIVER:-wext} -c ${WLAN_WPA_CONFIG:-/etc/wpa_supplicant.conf} -i ${DEVICE} ${WLAN_WPA_OPTIONS} -P "/var/run/wpa_supplicant-${DEVICE}.pid" -B
+ [ -z "$WLAN_WPA_WAIT_TIMEOUT" ] && WLAN_WPA_WAIT_TIMEOUT=15
+ # check_link_down sleeps for 0.5s
+ check_link_down ${DEVICE} $(( $WLAN_WPA_WAIT_TIMEOUT * 2 ))
+fi
+
+if [ -n "$ETHTOOL_OPTS" ] ; then
+ /sbin/ethtool -s $DEVICE $ETHTOOL_OPTS
+fi
+
+if is_yes "$SLAVE" && [ -n "$MASTER" ] ; then
+ nls "Enslaving %s to %s" "$DEVICE" "$MASTER"
+ ip link set "$DEVICE" master "$MASTER"
+ ip link set "$DEVICE" up
+
+ exit 0
+fi
+
+if [ "$HANDLING" = "2" ]; then
+ exit 0
+fi
+
+if [ -n "$BOOTPROTO" -a "$BOOTPROTO" != "none" -a "$BOOTPROTO" != "static" ]; then
+ if is_yes "$IPV4_NETWORKING"; then
+ set_dhcpclient
+
+ DHCP_ARGS=
+ if [ -n "$DHCP_CLIENT" ]; then
+ if [ -z "$DHCP_HOSTNAME" ]; then
+ # set DHCP_HOSTNAME only basename
+ DHCP_HOSTNAME=${HOSTNAME%%.*}
+ fi
+ case ${DHCP_CLIENT##*/} in
+ pump)
+ [ -n "$DHCP_HOSTNAME" ] && DHCP_ARGS="-h $DHCP_HOSTNAME"
+ DHCP_ARGS="$DHCP_ARGS -i $DEVICE"
+ ;;
+ dhcpcd)
+ [ -n "$DHCP_HOSTNAME" ] && DHCP_ARGS="-h $DHCP_HOSTNAME"
+ DHCP_ARGS="$DHCP_ARGS $DEVICE"
+ if is_no "$ZEROCONF"; then
+ DHCP_ARGS="$DHCP_ARGS --noipv4ll"
+ fi
+ ;;
+ dhcpxd)
+ [ -n "$DHCP_HOSTNAME" ] && DHCP_ARGS="-H $DHCP_HOSTNAME"
+ DHCP_ARGS="$DHCP_ARGS $DEVICE"
+ ;;
+ dhclient)
+ # Can't specify a host with dhclient ?
+ DHCP_ARGS="$DEVICE -pf /var/run/dhclient.$DEVICE.pid -lf /var/lib/dhclient/dhclient.$DEVICE.leases"
+ if [ -f /etc/dhclient.$DEVICE.conf ] ; then
+ DHCP_ARGS="$DHCP_ARGS -cf /etc/dhclient.$DEVICE.conf"
+ fi
+ ;;
+ avahi-autoipd)
+ DHCP_ARGS="-D $DEVICE"
+ ;;
+ esac
+ fi
+ DHCP_ARGS="$DHCP_OPTIONS $DHCP_ARGS"
+
+ if check_link_down ${DEVICE}; then
+ run_cmd "$(nls 'Determining IP information for %s (%s)' "$DEVICE" "${DHCP_CLIENT##*/}")" /bin/false
+ nls '%s: Check cable/radio on-off switch?' "$DEVICE"
+ exit 1
+ fi
+
+ if ! run_cmd "$(nls 'Determining IP information for %s (%s)' "$DEVICE" "${DHCP_CLIENT##*/}")" $DHCP_CLIENT $DHCP_ARGS; then
+ exit 1
+ fi
+
+ # give time for determining IP information
+ check_device_down && sleep 1 && check_device_down && sleep 3
+ check_device_down && ip link set ${DEVICE} up
+ fi
+else
+ # IPv4 in use ?
+ if is_yes "$IPV4_NETWORKING" && [ -n "${IP4ADDR}" ]; then
+ # If broadcast is missing then autocalculate it
+ if ! (echo $IP4ADDROPT | grep -qE "brd|broadcast"); then
+ IP4ADDROPT="brd + ${IP4ADDROPT}"
+ fi
+
+ if [ -n "${SUBDEVICE}" ]; then
+ ALIAS="label ${SUBDEVICE}"
+ fi
+
+ if [ -n "$REMIP" ]; then
+ ip addr add ${IP4ADDR} peer ${REMIP} ${ALIAS} dev ${DEVICE} ${IP4ADDROPT}
+ else
+ ip addr add ${IP4ADDR} ${ALIAS} dev ${DEVICE} ${IP4ADDROPT}
+ fi
+ fi
+
+ # Set device up
+ ip link set ${DEVICE} up
+
+ # IPv6 in use ?
+ if is_yes "$IPV6_NETWORKING" && [ -n "${IP6ADDR}" ]; then
+ ip addr add ${IP6ADDR} dev ${DEVICE} ${IP6ADDROPT}
+ if [ -n "${IP6ADDRLABEL}" ]; then
+ ip addrlabel add prefix ${IP6ADDR} dev ${DEVICE} label ${IP6ADDRLABEL}
+ fi
+ fi
+
+ if is_yes "$IPV4_NETWORKING" && [ -n "${IP4ADDR}" -a -x /sbin/arping ]; then
+ # update ARP cache of neighbouring computers
+ /sbin/arping -q -A -c 1 -I ${DEVICE} ${IP4ADDR%/*}
+ { ( sleep 2; /sbin/arping -q -U -c 1 -I ${DEVICE} ${IP4ADDR%/*} ) & } > /dev/null 2>&1
+ fi
+
+ # IPv4/6 gateways and default routes
+ setup_ip_gw_ro
+fi
+
+# device have to have ip address set before
+if is_yes "$PROXYARP"; then
+ run_cmd "$(nls 'Enabling proxy ARP on %s' "${DEVICE}")" sysctl -w net.ipv4.conf.${SYSCTLDEVICE}.proxy_arp=1
+fi
+
+if [ "$HANDLING" = "3" ]; then
+ exit 0
+fi
+
+if is_yes "$IPX"; then
+ /lib/rc-scripts/ifup-ipx $DEVICE
+fi
+
+if is_yes "$ENABLE_6TO4"; then
+ # find an usable IPv4 address for this device; might have been obtained by dhcp or ppp
+ for ipv4 in `/sbin/ip addr show dev $DEVICE | awk -F'[ /]+' '/ inet /{print $3}'`; do
+ if [ `ipcalc -n $ipv4/8` != "NETWORK=10.0.0.0" \
+ -a `ipcalc -n $ipv4/12` != "NETWORK=172.16.0.0" \
+ -a `ipcalc -n $ipv4/24` != "NETWORK=192.168.0.0" \
+ -a `ipcalc -n $ipv4/24` != "NETWORK=169.254.0.0" ]; then
+ local_ipv4=$ipv4
+ local_ipv6=`printf "2002:%02x%02x:%02x%02x::1" $(echo $ipv4 | tr . ' ')`
+ break
+ fi
+ done
+ if [ -n "$local_ipv4" ]; then # we have an usable IPv4 address; set up the tunnel
+ tun6to4=tun6to4_$DEVICE
+ /sbin/ip tunnel add $tun6to4 mode sit ttl 128 remote any local $local_ipv4
+ /sbin/ip link set dev $tun6to4 up
+ /sbin/ip -6 addr add $local_ipv6/16 dev $tun6to4
+ /sbin/ip -6 route add 2000::/3 via ::192.88.99.1 dev $tun6to4 metric 1
+ fi
+fi
+
+if [ "$HANDLING" = "4" ]; then
+ exit 0
+fi
+
+exec /lib/rc-scripts/ifup-post $CONFIG
--- /dev/null
+#!/bin/sh
+#
+#
+# Adds all addresses of device.
+# Called from ifup-post.
+
+# Add all addresses
+for IP_ADDR in $IPADDR_ALIASES; do
+ [ -z "$IP_ADDR" ] && continue
+ # Be sure that primary address is added
+ if [ "$IP_ADDR" = "$IP4ADDR" -o "$IP_ADDR" = "$IP6ADDR" ]; then
+ if (ip addr show dev $DEVICE | grep -qE "[[:space:]]${IP_ADDR}[[:space:]]"); then
+ continue
+ fi
+ fi
+ if is_yes "${IPV4_NETWORKING}"; then
+ ip -4 addr add ${IP_ADDR} dev ${DEVICE} brd +
+ fi
+done
+
+for IP_ADDR in $IPV6_ADDR; do
+ [ -z "$IP_ADDR" ] && continue
+ # Be sure that primary address is added
+ if [ "$IP_ADDR" = "$IP4ADDR" -o "$IP_ADDR" = "$IP6ADDR" ]; then
+ if (ip addr show dev $DEVICE | grep -qE "[[:space:]]${IP_ADDR}[[:space:]]"); then
+ continue
+ fi
+ fi
+ # Check for IPv6 address
+ if (echo $IP_ADDR | grep -q ":"); then
+ if is_yes "${IPV6_NETWORKING}"; then
+ ip -6 addr add ${IP_ADDR} dev ${DEVICE}
+ fi
+ elif is_yes "${IPV4_NETWORKING}"; then
+ ip -4 addr add ${IP_ADDR} dev ${DEVICE} brd +
+ fi
+done
+
+for nr in $(awk 'BEGIN { max=0; }; /^IPADDR[0-9]+=/ { s = $0; gsub(/^IPADDR/, "", s); gsub(/=.*/, "", s); if (int(s) > int(max)) { max=s; }; }; END { for(j=1; j<=int(max); j++) print j } ' $CONFIG); do
+ eval IP_ADDR="\$IPADDR${nr}"
+ [ -z "$IP_ADDR" ] && continue
+
+ eval IP_ADDR_OPT="\$IP_AOPTS${nr}"
+ eval IP_ROUTE_OPT="\$IP_ROPTS${nr}"
+ eval IP_ADDR_LABEL="\$IP_LABEL${nr}"
+
+ # Be sure that primary address is added
+ if [ "$IP_ADDR" = "$IP4ADDR" -o "$IP_ADDR" = "$IP6ADDR" ]; then
+ if (ip addr show dev $DEVICE | grep -qE "[[:space:]]${IP_ADDR}[[:space:]]"); then
+ continue
+ fi
+ fi
+ # Check for IPv6 address
+ if echo $IP_ADDR | grep -q ":"; then
+ if is_yes "${IPV6_NETWORKING}"; then
+ ip -6 addr add ${IP_ADDR} dev ${DEVICE} ${IP_ADDR_OPT}
+ if [ -n "${IP_ADDR_LABEL}" ]; then
+ ip -6 addrlabel add prefix ${IP_ADDR} dev ${DEVICE} label ${IP_ADDR_LABEL}
+ fi
+ fi
+ elif is_yes "${IPV4_NETWORKING}"; then
+ # If broadcast is missing then autocalculate it
+ if ! (echo $IP_ADDR_OPT | grep -qE "brd|broadcast"); then
+ IP_ADDR_OPT="brd + ${IP_ADDR_OPT}"
+ fi
+ ip -4 addr add ${IP_ADDR} dev ${DEVICE} ${IP_ADDR_OPT}
+ fi
+done
+
+# Setup IPv4-compatible addresses
+if is_yes "$IPV6_NETWORKING" && [ "$BOOTPROTO6" = "v4compat" ]; then
+ # enable automatic tunnels
+ ip link set sit0 up
+
+ # add v4compat addresses to device
+ for addr in $(ip -4 addr show scope global dev $DEVICE | \
+ awk '/inet/ { print $2 }' | awk -F"/" '{ print $1 }'); do
+ ip -6 addr add ::$addr dev $DEVICE
+ done
+fi
--- /dev/null
+#!/bin/sh
+#
+# ifup-br - bridge configuration script
+# Copyright (C) 2000 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+if [ ! -x /sbin/brctl ]; then
+ nls "%s is missing. Can't continue." "/sbin/brctl"
+ exit 1
+fi
+
+# load bridge module
+is_module "bridge" && modprobe -s bridge
+
+# set all major variables
+setup_ip_param
+
+# forget all addresses
+for device in $BRIDGE_DEVS; do
+ LC_ALL=C ip addr flush dev ${device} 2>&1 | grep -v "Nothing to flush"
+done
+
+# set wireless parameters
+for device in $BRIDGE_DEVS; do
+ if is_wireless_device "${device}"; then
+ wireless_param "${device}" "br"
+ fi
+done
+
+brctl addbr ${DEVICE}
+
+# add interfaces to bridge
+for device in $BRIDGE_DEVS; do
+ brctl addif ${DEVICE} ${device}
+ ip link set dev ${device} multicast ${MULTICAST} ${ARP}
+ ip link set ${device} up
+done
+
+
+# standard
+[ -n "$AGEING" ] && brctl setageing "$AGEING"
+[ -n "$GCINT" ] && brctl setgcint "$GCINT"
+[ -n "$FD" ] && brctl setfd ${DEVICE} "$FD"
+
+# spanning tree protocol
+if is_yes "$SPANNING_TREE"; then
+ brctl stp ${DEVICE} yes
+ [ -n "$BRIDGEPRIO" ] && brctl setbridgeprio ${DEVICE} "$BRIDGEPRIO"
+ [ -n "$HELLO" ] && brctl sethello ${DEVICE} "$HELLO"
+ [ -n "$MAXAGE" ] && brctl setmaxage ${DEVICE} "$MAXAGE"
+ [ -n "$PATHCOST" -a -n "$PATHCOST_PORT" ] && brctl setpathcost ${DEVICE} "$PATHCOST_PORT" "$PATHCOST"
+ [ -n "$PORTPRIO" -a -n "$PORTPRIO_PORT" ] && brctl setportprio ${DEVICE} "$PORTPRIO_PORT" "$PORTPRIO"
+else
+ brctl stp ${DEVICE} no
+fi
+
+ip link set dev ${DEVICE} multicast ${MULTICAST} ${ARP}
+if ! (ip link set dev ${DEVICE} up); then
+ nls "problems with setting bridge %s" "${DEVICE}"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+#
+#
+# configures IPX on $1 if appropriate
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+if [ "$1" = "" ]; then
+ nls "Usage: %s <device name>" "ifup-ipx" >&2
+ exit 1
+fi
+
+if is_no "$IPX"; then
+ exit 0
+fi
+
+if [ ! -x /sbin/ipx_interface ] ; then
+ nls "%s is missing. Can't continue." "/sbin/ipx_interface"
+ exit 1
+fi
+
+cd /lib/rc-scripts
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+# set all major variables
+setup_ip_param
+
+# add ipx for all frame types
+for frametype in '802.2' '802.2TR' '802.3' 'EtherII' 'SNAP'; do
+ framename=$(echo $frametype | awk ' { gsub(/\./,"_"); print $0 } ')
+ case $(eval echo $(echo \$$(echo IPXACTIVE_$framename))) in
+ yes|true)
+ case $(eval echo $(echo \$$(echo IPXPRIMARY_$framename))) in
+ yes|true) primary="-p" ;;
+ *) primary= ;;
+ esac
+ ip link set $DEVICE up
+ /sbin/ipx_interface add $primary $DEVICE $frametype \
+ $(eval echo $(echo \$$(echo IPXNETNUM_$framename)))
+ ;;
+ esac
+done
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# ifup-irda - IrDA configuration script
+# Copyright (C) 2001 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+if [ ! -x /sbin/irattach ]; then
+ nls "%s is missing. Can't continue." "/sbin/irattach"
+ exit 1
+fi
+
+. /etc/sysconfig/network
+
+# set all major variables
+setup_ip_param
+
+IRDAOPTS=
+
+if [ -n "${DONGLE}" ]; then
+ IRDAOPTS="${IRDAOPTS} -d ${DONGLE}"
+fi
+
+if is_yes "${DISCOVERY}" || [ -z "${DISCOVERY}" ]; then
+ IRDAOPTS="${IRDAOPTS} -s"
+fi
+
+/sbin/irattach ${IRDAPORT} ${IRDAOPTS}
+
+ip link set dev ${DEVICE} multicast ${MULTICAST} ${ARP}
+if ! (ip link set dev ${DEVICE} up); then
+ nls "problems with setting %s %s" "IrDA" "${DEVICE}"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+# set all major variables
+setup_ip_param
+
+if is_yes "$IPV4_NETWORKING"; then
+ if [ -n "$IP4ADDR" ]; then
+ ip -4 addr add ${IP4ADDR} peer ${REMIP} dev ${DEVICE}
+ fi
+fi
+
+if is_yes "$IPV6_NETWORKING"; then
+ if [ -n "$IP6ADDR" ]; then
+ ip -6 addr add ${IP6ADDR} dev ${DEVICE}
+ fi
+fi
+
+ip link set dev ${DEVICE} up
+
+. /etc/sysconfig/network
+
+# IPv4/6 gateways and default routes
+setup_ip_gw_ro
+
+/lib/rc-scripts/ifup-post $1
--- /dev/null
+#!/bin/sh
+#
+#
+# Adds static arps for device $DEVICE
+# Called from ifup-post.
+
+if is_no "$IPV4_NETWORKING"; then
+ return
+fi
+
+if [ ! -f /etc/sysconfig/static-arp ]; then
+ return
+fi
+
+# note the trailing white space character in the grep gets rid of aliases
+grep -E "^($DEVICE|any)[[:blank:]]" /etc/sysconfig/static-arp | while read iface mac ip state args; do
+ [ -z "$state" ] && state="stale"
+ /sbin/ip neigh replace $ip lladdr $mac nud $state dev $DEVICE
+done
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+# set all major variables
+setup_ip_param
+
+if is_yes "$IPV4_NETWORKING"; then
+ if [ -n "$IP4ADDR" ]; then
+ ip -4 addr add ${IP4ADDR} peer ${REMIP} dev ${DEVICE}
+ fi
+fi
+
+if is_yes "$IPV6_NETWORKING"; then
+ if [ -n "$IP6ADDR" ]; then
+ ip -6 addr add ${IP6ADDR} dev ${DEVICE}
+ fi
+fi
+
+ip link set dev ${DEVICE} up
+
+. /etc/sysconfig/network
+
+# IPv4/6 gateways and default routes
+setup_ip_gw_ro
+
+/lib/rc-scripts/ifup-post $1
--- /dev/null
+#!/bin/sh
+#
+# The plusb network driver is a USB host-host cable based on the Prolific
+# chip. It works a lot like the plip driver.
+#
+# To get the plusb module to load automatically at boot, you will need to
+# add the following lines to /etc/conf.modules:
+#
+# alias plusb0 plusb
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+# set all major variables
+setup_ip_param
+
+if is_yes "$IPV4_NETWORKING"; then
+ if [ -n "$IP4ADDR" ]; then
+ ip -4 addr add ${IP4ADDR} peer ${REMIP} dev ${DEVICE}
+ fi
+fi
+
+if is_yes "$IPV6_NETWORKING"; then
+ if [ -n "$IP6ADDR" ]; then
+ ip -6 addr add ${IP6ADDR} dev ${DEVICE}
+ fi
+fi
+
+ip link set dev ${DEVICE} up
+
+. /etc/sysconfig/network
+
+# IPv4/6 gateways and default routes
+setup_ip_gw_ro
+
+/lib/rc-scripts/ifup-post $1
--- /dev/null
+#!/bin/sh
+#
+#
+
+run_up() { :; }
+
+. /etc/rc.d/init.d/functions
+. /etc/sysconfig/network
+. /lib/rc-scripts/functions.network
+
+need_hostname
+CONFIG=$1
+source_config
+
+# set all major variables
+setup_ip_param
+
+# set REALDEVICE
+get_ppp_device_and_pid
+
+# Simple QoS support (bandwidth limit)
+if [ -n "${BANDWIDTH_OUT}" ]; then
+ if [ "${QDISC_CLASS}" = "htb" -o "${QDISC_CLASS}" = "cbq" ]; then
+ case "${QDISC_CLASS}" in
+ htb)
+ tc qdisc add dev ${REALDEVICE} root handle 1: htb default 10
+ tc class add dev ${REALDEVICE} parent 1: classid 1:10 htb rate ${BANDWIDTH_OUT}kbit ceil ${BANDWIDTH_OUT}kbit
+ [ -n "${QDISC}" ] && tc qdisc add dev ${REALDEVICE} parent 1:10 ${QDISC}
+ ;;
+ cbq)
+ # FIXME: hardcoded ethernet speed (bandwidth)
+ tc qdisc add dev ${REALDEVICE} root handle 1: cbq bandwidth 100000kbit cell 8 avpkt 1000 mpu 64
+ tc class add dev ${REALDEVICE} parent 1: classid 1:10 cbq bandwidth 100000kbit rate ${BANDWIDTH_OUT}kbit maxburst 5 avpkt 1000 allot 1514 bounded
+ [ -n "${QDISC}" ] && tc qdisc add dev ${REALDEVICE} parent 1:10 ${QDISC}
+ tc filter add dev ${REALDEVICE} protocol ip parent 1: u32 match ip src 0.0.0.0/0 flowid 1:10
+ ;;
+ esac
+ elif [ -z "${QDISC}" -o "${QDISC}" = "tbf" ]; then
+ tc qdisc add dev ${REALDEVICE} root tbf rate ${BANDWIDTH_OUT}kbit latency 50ms burst 51200
+ elif [ -n "${QDISC}" ]; then
+ tc qdisc add dev ${REALDEVICE} root ${QDISC}
+ fi
+else
+ if [ -n "${QDISC}" ]; then
+ tc qdisc add dev ${REALDEVICE} root ${QDISC}
+ fi
+fi
+
+if [ -n "${BANDWIDTH_IN}" ]; then
+ tc qdisc add dev ${REALDEVICE} handle ffff: ingress
+ tc filter add dev ${REALDEVICE} parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate ${BANDWIDTH_IN}kbit burst 10k drop flowid :3
+fi
+
+. /lib/rc-scripts/ifup-aliases
+. /lib/rc-scripts/ifup-routes
+. /lib/rc-scripts/ifup-neigh
+
+# don't set hostname on ppp/slip connections
+if [ -n "$NEEDHOSTNAME" -a "${DEVICETYPE}" != "ppp" -a "${DEVICETYPE}" != "slip" ]; then
+ IPADDR=$(ip -f inet addr show dev ${DEVICE} |
+ awk '/inet/ { print $2 }' |awk -F"/" '{ print $1 }')
+ eval $(/bin/ipcalc --silent --hostname ${IPADDR}) && set_hostname $HOSTNAME
+fi
+
+# run tleds software
+if [ "$TLEDS_DEV" = "$DEVICE" -a -x /usr/bin/tleds ]; then
+ /usr/bin/tleds -qc "$DEVICE"
+fi
+
+# execute run_up() function (if available in device configuration file)
+run_up
+
+# Notify programs that have requested notification
+do_netreport
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+#
+# ifup-ppp script for pppd-2.3.5 (with persist & demand options) ver 0.2
+# Grzegorz Stanislawski <stangrze@open.net.pl>
+# Features:
+# - since persist option is included to pppd it's no need to do werid loops
+# ifup-ppp script. This also makes your logfile grow slower when Your link
+# is down.
+# - chat-ppp? file with script for chat is now parsed by shell, so You can
+# include in it shell variables (for example $PHONE, $USERNAME)
+# You can define any variable in ifcfg-ppp? file and use it in chat-ppp?
+# You only have to add it's name into DATAFORCHAT variable
+# Note, that chat-ppp file is now parsed by shell, so you have to escape
+# with "\" all shell special characters like \$;:)(& etc.
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+# ifup-post for PPP is handled through /etc/ppp/ip-up
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+# set all major variables
+setup_ip_param
+
+if [ "$2" = "boot" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+if [ ! -x /usr/sbin/pppd ]; then
+ nls "%s does not exist or is not executable" "/usr/sbin/pppd"
+ nls "%s for %s exiting" "ifup-ppp" "$DEVICE"
+ logger -p daemon.info -t ifup-ppp \
+ "$(nls '%s does not exist or is not executable for %s' \
+ "/usr/sbin/pppd" "$DEVICE")"
+ exit 1
+fi
+
+# modprobe ppp modules (udev case)
+[ ! -e /dev/ppp ] && modprobe -s char-major-108
+
+opts="lock"
+
+if [ -z "${REPORTFILE}" ] ; then
+ REPORTFILE=/dev/null
+fi
+
+if [ -n "${PPPOE_DEV}" ]; then
+ if is_yes "${PPPOE_KERNEL}"; then
+ modprobe -s pppoe
+ MODEMMODE="plugin rp-pppoe.so"
+ MODEMPORT="${PPPOE_DEV}"
+ else
+ MODEMMODE="pty"
+ MODEMPORT="pppoe -I ${PPPOE_DEV} ${PPPOE_OPT}"
+ fi
+elif is_yes "${PPPOA_EAGLE}"; then
+ EAGLECTRL="/usr/sbin/adictrl"
+ if [ ! -x $EAGLECTRL ]; then
+ EAGLECTRL="/usr/sbin/eaglectrl"
+ fi
+ if [ ! -x $EAGLECTRL ]; then
+ nls "%s does not exist or is not executable" "$EAGLECTRL"
+ nls "%s for %s exiting" "ifup-ppp" "$DEVICE"
+ exit 1
+ fi
+ $EAGLECTRL -w
+ PPPOA_IFACE=$( $EAGLECTRL -i 2>/dev/null)
+ if [ -z "$PPPOA_IFACE" ]; then
+ PPPOA_IFACE="(unknown)"
+ else
+ ip link set "$PPPOA_IFACE" up
+ fi
+ MODEMMODE="pty"
+ MODEMPORT="pppoa -I ${PPPOA_IFACE} ${PPPOA_OPT}"
+elif is_yes "${PPPOA_SPEEDTOUCH}"; then
+ if is_yes "${PPPOA_KERNEL}"; then
+ modprobe -s speedtch
+ modprobe -s pppoatm
+ if [ -n "${PPPOA_FIRMWARE}" ]; then
+ modem_run -k -s -f "${PPPOA_FIRMWARE}"
+ fi
+ MODEMMODE="plugin pppoatm.so"
+ MODEMPORT="${PPPOA_VPI}.${PPPOA_VCI}"
+ else
+ modem_run -s -f "${PPPOA_FIRMWARE}"
+ MODEMMODE="pty"
+ MODEMPORT="pppoa3 -v1 -c -vpi ${PPPOA_VPI} -vci ${PPPOA_VCI} ${PPPOA_OPT}"
+ fi
+elif is_yes "${PPPOA}"; then
+ MODEMMODE="plugin pppoatm.so"
+ MODEMPORT="${PPPOA_VPI}.${PPPOA_VCI}"
+else
+
+ if [ -n "$MODEMPORT" -a ! -c "$MODEMPORT" ]; then
+ echo >&2 "MODEMPORT=$MODEMPORT is not a character device!"
+ exit 1
+ fi
+
+ if is_no "${DIRECT_CONNECT}" || [ -z "${DIRECT_CONNECT}" ]; then
+ PEERCONF=/etc/ppp/peers/${DEVNAME}
+ if [ ! -f ${PEERCONF} ]; then
+ if [ -z "${WVDIALSECT}" ]; then
+ # XXX: REPORTFILE support is problematic here --misiek
+ [ -f "${CHATSCRIPT}" ] || CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-${PARENTDEVNAME}
+ if [ ! -f "${CHATSCRIPT}" ]; then
+ nls '%s does not exist, perhaps set $CHATSCRIPT' "${CHATSCRIPT}"
+ nls 'ifup-ppp for %s exiting' "${DEVNAME}"
+ logger -p daemon.info -t ifup-ppp \
+ "$(nls '%s does not exist for %s' "${CHATSCRIPT}" "${DEVICE}")"
+ exit 1
+ fi
+ fi
+ logger -s -p daemon.notice -t ifup-ppp "$(nls 'Setting up a new %s config file' "${PEERCONF}")"
+ if [ -f /etc/ppp/peers/${DEVICE} ]; then
+ cp -f /etc/ppp/peers/${DEVICE} ${PEERCONF}
+ else
+ touch ${PEERCONF}
+ fi
+ if [ "${WVDIALSECT}" ]; then
+ echo "connect \"/usr/bin/wvdial --chat ${WVDIALSECT} --config /etc/wvdial.conf >> ${REPORTFILE} 2>&1 \"" >> ${PEERCONF}
+ else
+ if is_yes "${DEBUG}"; then
+ chatdbg="-v"
+ fi
+ if [ -n "${DATAFORCHAT}" ]; then
+ chatreadenv=-E
+ fi
+ echo "connect \"/usr/sbin/chat $chatreadenv -f ${CHATSCRIPT} -r ${REPORTFILE} ${chatdbg}\"" >> ${PEERCONF}
+ fi
+ fi
+ opts="$opts call ${DEVNAME}"
+ fi
+fi
+
+if [ -z "$MODEMPORT" ]; then
+ # Last try:
+ if [ "${PPPOA_VPI}" -a "${PPPOA_VCI}" ]; then
+ MODEMPORT=${PPPOA_VPI}.${PPPOA_VCI}
+ else
+ echo >&2 "Missing modemport!"
+ exit 1
+ fi
+fi
+
+if [ -z "$HOLDOFF" ]; then
+ HOLDOFF=30
+fi
+if is_yes "${PERSIST}"; then
+ if [ -z "${MAXFAIL}" ]; then
+ MAXFAIL="0"
+ fi
+ opts="$opts persist holdoff $HOLDOFF maxfail $MAXFAIL"
+fi
+if is_yes "${DEMAND}"; then
+ if [ -z "${IDLE}" ]; then
+ IDLE="0"
+ fi
+ opts="$opts demand ktune idle ${IDLE}"
+fi
+if ! is_no "${HARDFLOWCTL}"; then
+ opts="$opts crtscts"
+fi
+if is_yes "${MODEMCTL}"; then
+ opts="$opts modem"
+fi
+if is_yes "${SYNC}"; then
+ opts="$opts sync"
+fi
+if is_yes "${ESCAPECHARS}"; then
+ opts="$opts asyncmap FFFFFFFF"
+else
+ opts="$opts asyncmap 00000000"
+fi
+if is_yes "${DEFROUTE}"; then
+ # pppd will no longer delete an existing default route
+ # so we have to help it out a little here.
+ ip route del 0/0 > /dev/null 2>&1
+ opts="$opts defaultroute"
+elif ! is_no "${DEFROUTE}"; then
+ opts="$opts defaultroute"
+fi
+if ! is_no "${PEERDNS}"; then
+ opts="$opts usepeerdns"
+fi
+if [ -n "${MRU}" ] ; then
+ opts="$opts mru ${MRU}"
+fi
+if [ -n "${MTU}" ] ; then
+ opts="$opts mtu ${MTU}"
+fi
+if is_yes "$IPV4_NETWORKING" && [ -n "${IP4ADDR}${REMIP}" ] ; then
+ # if either IP address is set, the following will work.
+ opts="$opts ${IP4ADDR}:${REMIP}"
+fi
+if is_yes "$IPV6_NETWORKING"; then
+ if is_yes "$IPV6_PPP"; then
+ if [ -n "${IP6ADDR}${REMIP6}" ] ; then
+ opts="$opts ipv6 ${IP6ADDR},${REMIP6}"
+ elif is_yes "$IPV6_CP_USEV4"; then
+ opts="$opts ipv6cp-use-ipaddr"
+ elif is_yes "$IPV6_CP_PERSISTENT"; then
+ opts="$opts ipv6cp-use-persistent"
+ fi
+ elif is_no "$IPV6_PPP"; then
+ opts="$opts noipv6"
+ fi
+elif is_no "$IPV6_NETWORKING"; then
+ opts="$opts noipv6"
+fi
+if is_yes "${IPX_PPP}"; then
+ opts="$opts ipx"
+ if [ -n "${IPX_PPP_NETWORK}" ]; then
+ opts="$opts ipx-network ${IPX_PPP_NETWORK}"
+ fi
+ if [ -n "${IPX_PPP_NODE}" ]; then
+ opts="$opts ipx-node ${IPX_PPP_NODE}"
+ fi
+ if [ -n "${IPX_PPP_ROUTING}" ]; then
+ opts="$opts ipx-routing ${IPX_PPP_ROUTING}"
+ fi
+fi
+
+if [ -n "${PAPNAME}" ] ; then
+ opts="$opts user ${PAPNAME}"
+fi
+if [ -n "${REMOTENAME}" ] ; then
+ opts="$opts remotename ${REMOTENAME}"
+fi
+if is_yes "${DEBUG}"; then
+ opts="$opts debug"
+fi
+if is_yes "${AUTH}"; then
+ opts="$opts auth"
+elif is_no "${AUTH}"; then
+ opts="$opts noauth"
+fi
+if is_yes "$PLUGIN_IFCFG_PASSWORD" && [ -n "$PASSWORD" ]; then
+ if [ -f "$CONFIG" ]; then
+ ifcfg_password_config="$CONFIG"
+ else
+ ifcfg_password_config="/etc/sysconfig/interfaces/$CONFIG"
+ fi
+ opts="$opts plugin ifcfg-password.so ifcfg $ifcfg_password_config"
+fi
+
+if ! is_no "${UNIT}"; then
+ UNIT=$(echo "${DEVICE}" | awk ' { gsub(/ppp/,NUL); print $0} ')
+ opts="$opts unit ${UNIT}"
+fi
+
+MODEM="${MODEMPORT}"; export MODEM
+
+(logger -p daemon.info -t ifup-ppp \
+ "$(nls 'pppd started for %s on device %s at speed %s' "$DEVICE" \
+ "$MODEMPORT" "${LINESPEED:-(unspecified)} on unit ${UNIT}")" &)&
+
+if [ -n "${DATAFORCHAT}" ]; then
+ export $DATAFORCHAT
+fi
+/usr/sbin/pppd $opts ${MODEMMODE} "${MODEMPORT}" ${LINESPEED} \
+ ipparam ${DEVNAME} linkname ${DEVNAME} \
+ ${PPPOPTIONS}
--- /dev/null
+#!/bin/sh
+#
+#
+# Adds static routes which go through device $DEVICE
+# Called from ifup-post.
+
+if [ ! -f /etc/sysconfig/static-routes -a ! -f /etc/sysconfig/static-routes6 ]; then
+ return
+fi
+
+# note the trailing white space character in the grep gets rid of aliases
+grep -E "^($DEVICE|any)[[:blank:]]" /etc/sysconfig/static-routes | while read device args; do
+ if [[ "$args" = *:* ]]; then
+ if is_no "$IPV6_NETWORKING"; then
+ continue
+ fi
+ else
+ if is_no "$IPV4_NETWORKING"; then
+ continue
+ fi
+ fi
+ /sbin/ip route add $args dev $REALDEVICE
+done
+
+if ! is_no "$IPV6_NETWORKING"; then
+ grep -E "^($DEVICE|any)[[:blank:]]" /etc/sysconfig/static-routes6 | while read device args; do
+ /sbin/ip -6 route add $args dev $REALDEVICE
+ done
+fi
+
+# based on information from http://avahi.org/wiki/AvahiAutoipd#Routes
+if is_yes "$ZEROCONF" && ! /sbin/ip link show dev $REALDEVICE | grep -q POINTOPOINT ; then
+ # metric based on device ifindex, so the same route may be added to
+ # multiple devices. Big, so it won't conflict with anything else.
+ if [ -f /sys/class/net/$REALDEVICE/ifindex ] ; then
+ metric="$(cat /sys/class/net/$REALDEVICE/ifindex)"
+ metric=$(($metric + 1000))
+ else
+ metric=1000
+ fi
+
+ # default route in default table, so it won't override default
+ # route set by other means
+ /sbin/ip route add default metric $metric dev $REALDEVICE table default
+
+ # add 169.254.0.0/16 route if not already present on the device
+ current=$(/sbin/ip route show 169.254.0.0/16 dev $REALDEVICE)
+ if [ -z "$current" ] ; then
+ /sbin/ip route add 169.254.0.0/16 metric $metric dev $REALDEVICE
+ fi
+
+ unset metric
+ unset current
+fi
--- /dev/null
+#!/bin/sh
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+# ifup-post can't be done for slip :-( Solution: use PPP
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+# become a daemon in case we have to persist.
+if [ "$1" != daemon ] ; then
+ # disconnect stdin, out, err to disassociate from controlling tty
+ # so that no HUPs will get through.
+ $0 daemon $*& </dev/null >/dev/null 2>/dev/null
+ exit 0
+fi
+shift
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" ] && is_no ${ONBOOT}; then
+ exit
+fi
+
+# set all major variables
+setup_ip_param
+
+if [ -z "$RETRYTIMEOUT" ]; then
+ RETRYTIMEOUT=30
+fi
+
+# Try to load slip module
+if is_module "slip"; then
+ /sbin/modprobe -s slip
+fi
+
+# we can use dip or direct slip connection via slattach
+if is_no "$DIRECT_CONNECT"; then
+ [ -x /usr/sbin/dip ] || {
+ nls "%s does not exist or is not executable" "/usr/sbin/dip"
+ nls "%s for %s exiting" "ifup-sl" "$DEVICE"
+ logger -p daemon.info -t ifup-sl \
+ "$(nls '%s does not exist or is not executable for %s' "/usr/sbin/dip" "$DEVICE")"
+ exit 1
+ }
+
+ DIPSCRIPT=/etc/sysconfig/interfaces/data/dip-$DEVNAME
+ [ -f $DIPSCRIPT ] || {
+ DIPSCRIPT=/etc/sysconfig/interfaces/data/dip-$PARENTDEVNAME
+ }
+ [ -f $DIPSCRIPT ] || {
+ nls '%s does not exist' "/etc/sysconfig/interfaces/data/dip-$DEVICE"
+ nls 'ifup-sl - %s exiting' "$DEVICE"
+ logger -p daemon.info -t ifup-sl \
+ "$(nls '%s does not exist for %s' "/etc/sysconfig/interfaces/data/dip-$DEVICE" "$DEVICE")"
+ exit 1
+ }
+
+ while : ; do
+ echo > /var/run/sl-$DEVICE.dev
+ (logger -p daemon.info -t ifup-sl \
+ "$(nls 'dip started for %s on %s at %s' "$DEVICE" "$MODEMPORT" "$LINESPEED")" &)&
+ doexec /usr/sbin/dip dip-$DEVICE $DIPSCRIPT
+ if is_no "$PERSIST" || [ ! -f /var/run/sl-$DEVICE.dev ] ; then
+ exit 0
+ fi
+ rm -f /var/run/sl-$DEVICE.dev
+
+ sleep $RETRYTIMEOUT || {
+ # sleep was killed
+ exit 0
+ }
+ done
+else
+ # direct connection via slattach
+ [ -z "$MTU" ] && MTU=1500
+ [ -z "$PROTOCOL" ] && PROTOCOL=slip
+
+ [ -x /sbin/slattach ] || {
+ nls "%s is missing. Can't continue." "/sbin/slattach"
+ nls "ifup-sl - %s exiting" "$DEVICE"
+ logger -p daemon.info -t ifup-sl \
+ "$(nls '%s does not exist or is not executable for %s' "/sbin/slattach" "$DEVICE")"
+ exit 1
+ }
+
+ echo > /var/run/sl-$DEVICE.dev
+ (logger -p daemon.info -t ifup-sl \
+ "$(nls 'slattach started for %s on %s at %s' "$DEVICE" "$MODEMPORT" "$LINESPEED")" &)&
+
+ slattach -p $PROTOCOL -s $LINESPEED $MODEMPORT &
+ usleep 1500
+
+ if is_yes "$IPV4_NETWORKING"; then
+ if [ -n "$IP4ADDR" -a -n "$REMIP" ]; then
+ # Peer is only for IPv4
+ ip -4 addr add $IP4ADDR peer $REMIP dev $DEVICE
+ fi
+ fi
+
+ if is_yes "$IPV6_NETWORKING"; then
+ if [ -n "$IP6ADDR" ]; then
+ ip -6 addr add $IP6ADDR dev $DEVICE
+ fi
+ fi
+
+ ip link set $DEVICE mtu $MTU up
+
+ # IPv4/6 gateways and default routes
+ setup_ip_gw_ro
+
+ /lib/rc-scripts/ifup-post $1
+fi
--- /dev/null
+#!/bin/sh
+#
+# ifup-vlan - Virtual LAN configuration script
+# Copyright (C) 2001 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /lib/rc-scripts
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+CONFIG=$1
+source_config
+
+if is_no "${VLAN_NETWORKING}"; then
+ exit 0
+fi
+
+if [ "foo$2" = "fooboot" ] && is_no "${ONBOOT}"; then
+ exit 0
+fi
+
+if [ -z "$VLAN_DEV" ]; then
+ VLAN_DEV=$(echo ${DEVICE} | awk ' { gsub(/\..*$/,NUL); print $0 } ')
+fi
+VLAN_ID=$(echo ${DEVICE} | awk " { gsub(/^.*\./,NUL); print \$0 } ")
+
+if [ ! -f /etc/sysconfig/interfaces/ifcfg-${VLAN_DEV} ]; then
+ nls "%s is missing. Can't continue." "ifcfg-${VLAN_DEV}"
+ exit 1
+fi
+
+if ! grep -qlE "ONBOOT=[^n][^o]" /etc/sysconfig/interfaces/ifcfg-${VLAN_DEV}; then
+ nls "Warning: ${VLAN_DEV} is disabled on boot."
+fi
+
+modprobe -s 8021q
+
+if [ ! -e /proc/net/vlan/config ]; then
+ nls "VLAN kernel support is missing. Can't continue."
+ exit 1
+fi
+
+# set all major variables
+setup_ip_param
+
+if (LC_ALL=C ip link add type vlan help 2>&1 | grep -q "VLANID :="); then
+ /sbin/ip link set ${VLAN_DEV} up
+ /sbin/ip link add link ${VLAN_DEV} name ${DEVICE} type vlan id ${VLAN_ID}
+ # default yes
+ is_no "${VLAN_REORDER_HDR}" && VLAN_REORDER_HDR=off || VLAN_REORDER_HDR=on
+ # default yes
+ is_no "$VLAN_GVRP" && VLAN_GVRP=off || VLAN_GVRP=on
+ /sbin/ip link set ${DEVICE} type vlan reorder_hdr ${VLAN_REORDER_HDR} gvrp ${VLAN_GVRP}
+elif [ -x /sbin/vconfig ]; then
+ /sbin/vconfig set_name_type DEV_PLUS_VID_NO_PAD
+ /sbin/ip link set ${VLAN_DEV} up
+ /sbin/vconfig add ${VLAN_DEV} ${VLAN_ID}
+ /sbin/vconfig set_flag ${DEVICE} 1 ${VLAN_REORDER_HDR:-1}
+else
+ nls "/sbin/vconfig or iproute2 with vlan support is missing. Can't continue."
+ exit 1
+fi
+RESULT=$?
+
+# XXX: more VLAN specific options support
+
+exit $RESULT
--- /dev/null
+#!/bin/sh
+#
+# tnldown - tunnel configuration script
+# Copyright (C) 1999, 2000 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+DEV=$1
+
+[ -z "$DEV" ] && {
+ nls "Usage: %s <device name>" "tnldown" >&2
+ exit 1
+}
+
+TNLCONFIGS=$(LC_ALL=C ls /etc/sysconfig/interfaces/tnlcfg-* 2>/dev/null | grep -vE '~$')
+TNLCONFIGS=$(grep -LE '^#!' $TNLCONFIGS)
+CONFIG=$(grep -lE "^DEVICE=[\"\']*$DEV[\"\']*\$" $TNLCONFIGS)
+
+if [ -z "$CONFIG" ]; then
+ CONFIG="$DEV"
+fi
+
+if false; then
+ [ -f "/etc/sysconfig/interfaces/$CONFIG" ] || CONFIG=tnlcfg-$CONFIG
+ [ -f "/etc/sysconfig/interfaces/$CONFIG" ] || {
+ echo "usage: tnldown <device name>" >&2
+ exit 1
+ }
+fi
+
+source_config
+
+case "${MODE}" in
+ sit|four)
+ is_no "${IPV6_NETWORKING}" && exit 0
+ is_no "${IPV6_TUNNELCONFIG}" && exit 0
+ ;;
+ ipip)
+ is_no "${IPV4_NETWORKING}" && exit 0
+ ;;
+ gre)
+ is_no "${IPV4_NETWORKING}" && exit 0
+ ;;
+ ipxip|ipipx)
+ is_no "${IPX}" && exit 0
+ ;;
+esac
+
+RESULT=0
+
+case "${MODE}" in
+ ipip|sit|gre)
+ ip link set ${DEVICE} down
+ ip tunnel del ${DEVICE}
+ RESULT=$?
+ ;;
+ four)
+ ip link set ${DEVICE} down
+ fourcfg del ${DEVICE}
+ RESULT=$?
+ ;;
+ ipxip|ipipx)
+ ;;
+esac
+
+exit $RESULT
--- /dev/null
+#!/bin/sh
+#
+# tnlup - tunnel configuration script
+# Copyright (C) 1999, 2000 Arkadiusz Miśkiewicz <misiek@pld-linux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+
+. /etc/sysconfig/network
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+DEV=$1
+
+[ -z "$DEV" ] && {
+ nls "Usage: %s <device name>" "tnlup" >&2
+ exit 1
+}
+
+TNLCONFIGS=$(LC_ALL=C ls /etc/sysconfig/interfaces/tnlcfg-* 2>/dev/null | grep -vE '~$')
+TNLCONFIGS=$(grep -LE '^#!' $TNLCONFIGS)
+CONFIG=$(grep -lE "^DEVICE=[\"\']*$DEV[\"\']*\$" $TNLCONFIGS)
+
+if [ -z "$CONFIG" ]; then
+ CONFIG="$DEV"
+fi
+
+if false; then
+ [ -f "/etc/sysconfig/interfaces/$CONFIG" ] || CONFIG=tnlcfg-$CONFIG
+ [ -f "/etc/sysconfig/interfaces/$CONFIG" ] || {
+ echo "usage: tnlup <device name>" >&2
+ exit 1
+ }
+fi
+
+source_config
+
+if [ "foo$2" = "fooboot" -a -n "${ONBOOT}" ] && is_no "${ONBOOT}"; then
+ exit
+fi
+
+case "${MODE}" in
+ sit|four)
+ is_no "${IPV6_NETWORKING}" && exit 0
+ is_no "${IPV6_TUNNELCONFIG}" && exit 0
+ [ "${MODE}" = "sit" ] && is_module "sit" && modprobe -s sit
+ [ "${MODE}" = "four" ] && is_module "fourtun" && modprobe -s fourtun
+ ;;
+ ipip)
+ is_no "${IPV4_NETWORKING}" && exit 0
+ is_module "ipip" && modprobe -s ipip
+ ;;
+ gre)
+ is_no "${IPV4_NETWORKING}" && exit 0
+ is_module "ip_gre" && modprobe -s ip_gre
+ ;;
+ ipxip|ipipx)
+ is_no "${IPX}" && exit 0
+ ;;
+esac
+
+RESULT=0
+[ -z "${LOCALADDR}" ] && LOCALADDR=any
+[ -z "${REMOTEADDR}" ] && REMOTEADDR=any
+[ -n "${TTL}" ] && TTL="ttl ${TTL}"
+[ -n "${TOS}" ] && TOS="tos ${TOS}"
+[ -n "${BIND_DEV}" ] && BIND_DEV="dev ${BIND_DEV}"
+[ -n "${PRIORITY}" ] && PRIORITY="priority ${PRIORITY}"
+[ -n "${HOPLIMIT}" ] && HOPLIMIT="hoplimit ${HOPLIMIT}"
+[ -n "${ENCAPLIMIT}" ] && ENCAPLIMIT="encaplimit ${ENCAPLIMIT}"
+
+if is_yes "${SEQ}"; then
+ SEQ=seq
+else
+ is_yes "${ISEQ}" && SEQ=iseq
+ is_yes "${OSEQ}" && SEQ="${SEQ} oseq"
+fi
+
+if is_yes "${CSUM}"; then
+ CSUM=csum
+else
+ is_yes "${ICSUM}" && CSUM=icsum
+ is_yes "${ICSUM}" && CSUM="${SEQ} ocsum"
+fi
+
+is_yes "${ISEQ}" && ISEQ=iseq
+
+[ -z "${PMTUDISC}" -a "${TTL}" != "0" -a "${TTL}" != "inherit" ] && PMTUDISC=yes
+
+if is_yes "${PMTUDISC}"; then
+ PMTUDISC=pmtudisc
+elif is_no "${PMTUDISC}"; then
+ PMTUDISC=nopmtudisc
+fi
+
+if [ -n "${KEY}" ]; then
+ IKEY=""
+ OKEY=""
+fi
+
+case "${MODE}" in
+ ipip|sit)
+ ip tunnel add ${DEVICE} mode ${MODE} local ${LOCALADDR} \
+ remote ${REMOTEADDR} ${TTL} ${TOS} ${PMTUDISC} ${BIND_DEV}
+ RESULT=$?
+ ;;
+ gre)
+ ip tunnel add ${DEVICE} mode ${MODE} local ${LOCALADDR} \
+ remote ${REMOTEADDR} ${TTL} ${TOS} ${PMTUDISC} ${BIND_DEV} \
+ ${CSUM} ${ISEQ} ${KEY} ${IKEY} ${OKEY}
+ RESULT=$?
+ ;;
+ fourtun)
+ fourcfg add ${DEVICE} saddr ${LOCALADDR} daddr ${REMOTEADDR} \
+ ${PRIORITY} ${HOPLIMIT} ${ENCAPLIMIT}
+ RESULT=$?
+ ;;
+ ipxip|ipipx)
+ ;;
+esac
+
+exit $RESULT
--- /dev/null
+#!/bin/sh
+set -e
+rev=$(git rev-parse HEAD)
+last_tag=$(git tag -l | grep '^0' | sort -V | tail -n1)
+
+if [ -n "$1" ]; then
+ tag="$1"
+else
+ tag=$(awk -F, '/AC_INIT/{print $2}' configure.ac | tr -d '[ ]')
+fi
+
+cat <<EOF
+Making tag: $tag at revision $rev
+
+You probably want to fill git shortlog from last tag $last_tag as annotated tag message:
+
+ git shortlog $last_tag..HEAD
+
+Press ENTER to continue, Ctrl+C to abort
+EOF
+read a
+
+git tag -a "$tag" $rev
+
+cat <<EOF
+
+To push tag, execute:
+
+ git push origin "refs/tags/$tag"
+EOF
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = de es fr ja ru sv
+
+man_MANS = \
+ consoletype.1 \
+ doexec.1 \
+ genhostid.1 \
+ getkey.1 \
+ initlog.1 \
+ ipcalc.1 \
+ netreport.1 \
+ ppp-watch.8 \
+ usernetctl.8 \
+ run-parts.8 \
+ usleep.1 \
+ crypttab.5 \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.TH CONSOLETYPE 1 "Red Hat, Inc" "RH" \" -*- nroff -*-
+.SH NAME
+\fBconsoletype
+\- print type of the console connected to standard input
+.SH SYNOPSIS
+\fBconsoletype [\fIfg\fR]
+.SH DESCRIPTION
+\fBconsoletype
+prints the type of console connected to standard input, and checks
+whether the console connected to standard input is the current
+foreground virtual console. With no arguments, it prints
+\fIvt\fR
+if console is a virtual terminal (/dev/tty* or /dev/console device if not on
+a serial console),
+\fIserial\fR
+if standard input is a serial console (/dev/console or /dev/ttyS*) and
+\fIpty\fR
+if standard input is a pseudo terminal.
+.SH RETURN VALUE
+\fBconsoletype
+when passed no arguments returns
+.TP
+\fI0
+if on virtual terminal
+.TP
+\fI1
+if on serial console
+.TP
+\fI2
+if on a pseudo terminal.
+.TP
+When passed the \fIfg\fR argument, \fBconsoletype\fR returns
+.TP
+\fI0
+if the console connected to standard input is the current virtual
+terminal
+.TP
+\fI1
+otherwise.
\ No newline at end of file
--- /dev/null
+.\" A man page for /etc/crypttab.
+.\"
+.\" Copyright (C) 2006 Red Hat, Inc. All rights reserved.
+.\"
+.\" This copyrighted material is made available to anyone wishing to use,
+.\" modify, copy, or redistribute it subject to the terms and conditions of the
+.\" GNU General Public License v.2.
+.\"
+.\" This program is distributed in the hope that it will be useful, but WITHOUT
+.\" ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+.\" FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+.\" more details.
+.\"
+.\" You should have received a copy of the GNU General Public License along
+.\" with this program; if not, write to the Free Software Foundation, Inc.,
+.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+.\"
+.\" Author: Miloslav Trmac <mitr@redhat.com>
+.TH crypttab 5 "Jul 2006"
+
+.SH NAME
+/etc/crypttab - encrypted block device table
+
+.SH DESCRIPTION
+The
+.B /etc/crypptab
+file describes encrypted block devices that are set up during system boot.
+
+Empty lines and lines starting with the
+.B #
+character are ignored.
+Each of the remaining lines describes one encrypted block device,
+fields on the line are delimited by white space.
+The first two fields are mandatory, the remaining two are optional.
+
+The first field contains the
+.I name
+of the resulting encrypted block device;
+the device is set up at
+\fB/dev/mapper/\fIname\fR.
+
+The second field contains a path to the underlying block device.
+If the block device contains a LUKS signature,
+it is opened as a LUKS encrypted partition;
+otherwise it is assumed to be a raw dm-crypt partition.
+
+The third field specifies the encryption password.
+If the field is not present or the password is set to \fBnone\fR,
+the password has to be manually entered during system boot.
+Otherwise the field is interpreted as a path to a file
+containing the encryption password.
+For swap encryption
+.B /dev/urandom
+can be used as the password file;
+using
+.B /dev/random
+may prevent boot completion
+if the system does not have enough entropy
+to generate a truly random encryption key.
+
+The fourth field, if present, is a comma-delimited list of options.
+The following options are recognized:
+.TP
+\fBcipher=\fIcipher\fR
+Specifies the cipher to use; see
+.BR cryptsetup (8)
+for possible values and the default value of this option.
+A cipher with unpredictable IV values, such as
+\fBaes-cbc-essiv:sha256\fR, is recommended.
+
+.TP
+\fBsize=\fIsize\fR
+Specifies the key size in bits; see
+.BR cryptsetup (8)
+for possible values and the default value of this option.
+
+.TP
+\fBhash=\fIhash\fR
+Specifies the hash to use for password hashing; see
+.BR cryptsetup (8)
+for possible values and the default value of this option.
+
+.TP
+\fBverify\fR
+If the the encryption password is read from console,
+it has to be entered twice (to prevent typos).
+
+.TP
+\fBswap\fR
+The encrypted block device will be used as a swap partition,
+and will be formatted as a swap partition
+after setting up the encrypted block device.
+The underlying block device
+will be formatted again as an unencrypted swap partition
+after destroying the encrypted block device.
+(This allows sharing a single swap partition between operating
+system installations,
+with some of them encrypting the swap partitions and some of them not.)
+
+\fIWARNING\fR: Using the
+.B swap
+option will destroy the contents of the named partition during every boot, so
+make sure the underlying block device is specified correctly.
+
+.TP
+\fBtmp\fR
+The encrypted block device will be prepared for using it as tmp partition:
+it will be formatted using
+.B mke2fs
+and its root directory will be set to mode 01777.
+The warning about the
+.B swap
+option applies here as well.
+
+.PP
+No options can be specified for LUKS encrypted partitions.
+
+.SH COMPATIBILITY
+The
+.B /etc/crypptab
+file format is based on the Debian cryptsetup package,
+and is intended to be compatible.
+
+.SH SEE ALSO
+.BR cryptsetup (8)
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/de
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.TH START\-STOP\-DAEMON 8 "14. Mai 2004" "Debian-Projekt" "dpkg Werkzeuge"
+.\"
+.\" Translated into german by Helge Kreutzmann <kreutzm@itp.uni-hannover.de>
+.hw wei-tere
+.SH NAME
+start\-stop\-daemon \- startet und stoppt System-Daemon-Programme
+.SH "ÜBERSICHT"
+.B start-stop-daemon
+.BR -S | --start
+.IR Optionen
+.RB [ \-\- ]
+.IR Argumente
+.HP
+.B start-stop-daemon
+.BR -K | --stop
+.IR Optionen
+.HP
+.B start-stop-daemon
+.BR -H | --help
+.HP
+.B start-stop-daemon
+.BR -V | --version
+.SH BESCHREIBUNG
+.B start\-stop\-daemon
+wird zur Kontrolle der Erzeugung und Beendigung von Prozessen auf
+Systemebene verwendet. Durch die Verwendung der
+.BR --exec ", " --pidfile ", " --user ", und " --name " Optionen"
+kann
+.B start\-stop\-daemon
+so konfiguriert werden, daß er bereits existierende Instanzen von
+einem laufenden Prozess finden kann.
+
+Mittels
+.BR --start
+überprüft
+.B start\-stop\-daemon
+auf die Existenz von speziellen Prozessen.
+Falls ein solcher Prozess existiert, dann macht
+.B start\-stop\-daemon
+nichts, und beendet sich mit Fehlerstatus 1
+(0, falls
+.BR --oknodo
+angegeben wurde).
+Falls ein solcher Prozess nicht existiert, dann
+startet es eine Instanz, entweder unter Verwendung
+des ausführbaren Programms, das mittels
+.BR --exec
+spezifiziert wurde (oder, falls angegeben, mittels
+.BR --startas ).
+Jedes weitere auf der Kommandozeile angegebene Argument nach
+.BR --
+wird unverändert an das zu startende Programm weitergegeben. Falls
+.B --retry
+spezifiziert wurde, dann überprüft
+.B start-stop-daemon
+ob der Prozess (die Prozesse) beendet wurden.
+
+Mit
+.BR --stop
+überprüft
+.B start\-stop\-daemon
+auf auf die Existenz eines speziellen Prozesses. Falls ein
+solcher Prozess existiert, dann sendet
+.B start\-stop\-daemon
+das durch
+.BR --signal
+spezifizierte Signal
+und beendet sich mit Fehlerstatus 0.
+Falls kein solcher Prozess existiert, dann
+beendet sich
+.B start\-stop\-daemon
+mit Fehlerstatus 1
+(0 falls
+.BR --oknodo
+spezifiziert ist).
+
+.SH OPTIONEN
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIProgramm\fP
+Überprüfe auf Prozesse die (laut
+.BR /proc/\fIpid\fB/exe\fP )
+Instanzen von diesem Programm sind.
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIpid-Datei\fP
+Überprüfe auf Prozesse deren Prozess-ID in
+.IR pid-Datei
+angegeben ist.
+.TP
+\fB-u\fP|\fB--user\fP \fIBenutzername\fP|\fIuid\fP
+Überprüfe auf Prozesse die dem mit
+.I Benutzername
+oder
+.IR uid
+spezifizierten Benutzer gehören.
+.TP
+\fB-g\fP|\fB--group\fP \fIGruppe\fP|\fIgid\fP
+Wechsle zum Starten des Prozesses zur \fIGruppe\fP oder \fIgid\fP.
+.TP
+\fB-n\fP|\fB--name\fP \fIProzessname\fP
+Überprüfe
+(laut
+.BR /proc/\fIpid\fB/stat\fP )
+auf Prozesse mit dem Namen
+.IR Prozessname .
+.TP
+\fB-s\fP|\fB--signal\fP \fISignal\fP
+Mit
+.BR --stop
+wird das an den zu beendenden Prozess zu sendende Signal spezifiziert
+(standardmäßig 15).
+.TP
+\fB-R\fP|\fB--retry\fP \fItimeout\fP|\fIPlan\fP
+Mit
+.BR --stop
+spezifiziert, das
+.B start-stop-daemon
+überprüfen soll, ob der Prozess (die Prozesse) sich beenden. Es
+überprüft regelmäßig, ob ein passender Prozess läuft, bis dies
+nicht mehr der Fall ist. Falls sich die Prozesse nicht
+beenden werden weitere im »Plan« angegebene Aktionen durchgeführt.
+
+Falls
+.I timeout
+anstelle von
+.I Plan
+spezifiziert wird, dann wird der Plan
+.IB signal / timeout /KILL/ timeout
+verwendet, wobei
+.I signal
+das mit
+.BR --signal
+spezifizierte Signal ist.
+
+.I Plan
+ist eine Liste von mindestens zwei durch Schrägstriche
+.RB ( / )
+getrennten Punkten; jeder Punkt kann aus
+.BI - Signalnummer
+oder [\fB\-\fP]\fISignalname\fP bestehen,
+was bedeutet, daß dieses Signal gesendet werden soll, oder
+aus
+.IR timeout
+was bedeutet das soviele Sekunden auf das Beenden des
+Prozesses gewartet werden soll, oder
+.BR forever
+was bedeutet, den Rest des Plans falls notwendig für immer
+zu wiederholen.
+
+Falls das Ende des Plans erreicht wird und
+.BR forever
+nicht spezifiziert wurde, dann beendet sich der
+.B start-stop-daemon
+mit dem Fehlerstatus 2.
+Falls ein Plan spezifiziert wurde dann wird jedes
+mit
+.B --signal
+spezifizierte Signal ignoriert.
+.TP
+\fB-a\fP|\fB--startas\fP \fIPfadname\fP
+Mit
+.BR --start
+wir der über
+.IR Pfadname
+spezifizierte Prozess gestartet. Falls nicht angegeben,
+werden standardmäßig die an
+.B --exec
+übergebenen Argumente verwendet.
+.TP
+.BR -t | --test
+Gibt die zu erledigenden Aktionen aus und setzt die entsprechenden
+Rückgabewerte, führt aber keine Aktionen durch.
+.TP
+.BR -o | --oknodo
+Liefert den Rückgabewert 0 anstatt 1 falls keine Aktionen ausgeführt wurden (würden).
+.TP
+.BR -q | --quiet
+Gibt keine informationelle Meldungen aus, nur Fehlermeldungen werden angezeigt.
+.TP
+\fB-c\fP|\fB--chuid\fP \fIBenutzername\fR|\fIuid\fP
+Wechselt vor dem Start des Prozesses zu diesem Benutzername/uid. Sie
+können durch Anhängen von
+.BR :
+auch die Gruppe spezifizieren, in diesem Fall wird die Gruppe oder gid
+wie bei dem »chown«-Befehl (\fIBenutzer\fP\fB:\fP\fIGruppe\fP) angegeben.
+Wenn Sie diese Option verwenden, müssen Sie daran denken, daß die primäre
+und zusätzlichen Gruppe auch gesetzt werden, selbst wenn die
+.B --group
+Option nicht spezifiziert wird. Die
+.B --group
+ist nur für Gruppen in denen der Benutzer normalerweise kein Mitglied
+ist (wie das Hinzufügen von pro-Prozess Gruppenmitgliedschaften für
+generische Nutzer wie
+.BR nobody ).
+.TP
+\fB-r\fP|\fB--chroot\fP \fIWurzel\fP
+Chdir und chroot vor dem Start des Prozesse zu
+.IR Wurzel .#
+Bitte beachten Sie das die PID-Datei auch nach dem chroot geschrieben
+wird.
+.TP
+\fB-d\fP|\fB--chdir\fP \fIPfad\fP
+Chdir vor dem Starten des Prozesses zu
+.IR Pfad .
+Dies wird, falls die \fB-r\fP|\fB--chroot\fP Option gesetzt ist,
+nach dem chroot durchgeführt.
+.TP
+.BR -b | --background
+Typischerweise verwendet für Programme die sich nicht selbständig
+ablösen. Diese Option zwingt
+.B start-stop-daemon
+vor dem Start des Prozesses einen Fork durchzuführen, und ihn in
+den Hintergrund zu zwingen.
+.B WARNUNG: start-stop-daemon
+kann nicht den Rückgabewert überprüfen, falls der Prozess aus
+.B irgendeinem
+Grund nicht startet. Dies ist ein letztes Mittel und ist nur für Programme
+gedacht, bei denen das selbstständige Forken keinen Sinn macht oder wo es
+nicht sinnvoll ist, den Code hierfür hinzuzufügen.
+.TP
+\fB-N\fP|\fB--nicelevel\fP \fIGanzzahl\fP
+Dies ändert die Priorität des Prozesses bevor er gestartet wird.
+.TP
+.BR -m | --make-pidfile
+Verwendet wenn ein Programm gestartet wird, dass keine eigene PID-Datei
+erstellt. Diese Option sorgt dafür, dass
+.B start-stop-daemon
+die mit
+.B --pidfile
+referenzierte Datei anlegt und die PID kurz vor der Ausführung des Prozesse
+hineinlegt. Beachten Sie, dass sie nicht entfernt wird wenn das Programm
+beendet wird.
+.B HINWEIS:
+Diese Funktion könnte nicht in allen Fällen funktionieren. Insbesondere wenn
+das auszuführende Programm sich vom Hauptprozess forkt. Deshalb ist diese
+Option normalerweise nur in Kombination mit der
+.B --background
+Option sinnvoll.
+.TP
+.BR -v | --verbose
+Gibt ausführliche informative Meldungen aus.
+.TP
+.BR -H | --help
+Gibt Hilfeinformationen aus und beendet sich dann.
+.TP
+.BR -V | --version
+Gibt Versionsinformationen aus und beendet sich dann.
+
+.SH AUTOREN
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> basierend
+auf einer vorherigen Version von
+Ian Jackson <ian@chiark.greenend.org.uk>.
+
+Handbuchseite von Klee Dienes <klee@mit.edu>, teilweise von Ian
+Jackson umformatiert.
--- /dev/null
+.TH DOEXEC 1 "Red Hat Software" "RHS" \" -*- nroff -*-
+.SH NAME
+doexec \- run an executable with an arbitrary argv[0]
+.SH SYNOPSIS
+.B doexec
+\fI/path/to/executable\fP \fIargv[0]\fP [\fIargv[1-n]\fP]
+.SH DESCRIPTION
+.B doexec
+simply runs the executable with the argv list provided. It allows you
+to specify an argv[0] other than the name of the executable.
+.SH OPTIONS
+All options are passed in the argv list to the executable being run.
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/es
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.\" Hey, Emacs! This is an -*- nroff -*- source file.
+.\" (c) 2003 Software in the Public Interest
+.\" Traductor: Rubén Porras Campo <nahoo@inicia.es> y revisada
+.\" por Santiago Vila <sanvila@unex.es>
+.\" Basado en la versión 1.3 de
+.\" /cvs/debian-doc/manpages/english/dpkg/start-stop-daemon.8
+
+.TH START\-STOP\-DAEMON 8 "15 de marzo de 1997" "Proyecto Debian" "Debian GNU/Linux"
+.SH NOMBRE
+start\-stop\-daemon \- para y arranca demonios del sistema
+.SH SINOPSIS
+.B start-stop-daemon
+.BR -S | --start
+.IR opciones
+.RB [ \-\- ]
+.IR argumentos
+.HP
+.B start-stop-daemon
+.BR -K | --stop
+.IR opciones
+.HP
+.B start-stop-daemon
+.BR -H | --help
+.HP
+.B start-stop-daemon
+.BR -V | --version
+.SH DESCRIPCIÓN
+.B start\-stop\-daemon
+se usa para controlar la creación y terminación de los procesos del sistema.
+Usando las opciones
+.BR --exec ", " --pidfile ", " --user ", y " --name " opciones,"
+.B start\-stop\-daemon
+se puede configurar para encontrar distintos procesos del mismo demonio.
+
+Con
+.BR --start ,
+.B start\-stop\-daemon
+comprueba la existencia del proceso especificado.
+Si este proceso ya existe,
+.B start\-stop\-daemon
+no hace nada, y termina con un estado de error 1 (0 si se especifica
+.BR --oknodo
+).
+Si el proceso no existe, comienza uno nuevo,
+usando el ejecutable especificado por
+.BR --exec ,
+(o, si se especifica, por
+.BR --startas
+).
+Cualquier argumento dado en la línea de ordenes después de
+.BR --
+se pasa sin modificación alguna al programa que se va a ejecutar. Si se
+especifica la opción
+.B --retry
+entonces
+.B start-stop-daemon
+comprobará que el proceso o los procesos han terminado.
+
+Con
+.BR --stop ,
+.B start\-stop\-daemon
+comprueba además la existencia del proceso especificado.
+Si este proceso existe,
+.B start\-stop\-daemon
+envía la señal especificada por
+.BR --signal ,
+y termina con un estado de error 0.
+Si este proceso no existe,
+.B start\-stop\-daemon
+termina con un estado de error 1 (0 si se ha especificado la opción
+.BR --oknodo
+).
+
+.SH OPCIONES
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIejecutable\fP
+Busca distintos procesos de este ejecutable (según
+.B /proc/\fIpid\fB/exe\fP
+).
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIfichero-de-pid\fP
+Comprueba si existen los procesos cuyo id corresponde con el
+especificado en
+.IR fichero-de-pid .
+.TP
+\fB-u\fP|\fB--user\fP \fInombre-usuario\fP|\fIuid\fP
+Comprueba si existen los procesos del usuario especificado por
+.I nombre-usuario
+o
+.IR uid .
+.TP
+\fB-g\fP|\fB--group\fP \fIgrupo\fP|\fIgid\fP
+Cambia a \fIgrupo\fP o \fIgid\fP cuando comienza el proceso.
+.TP
+\fB-n\fP|\fB--name\fP \fInombre-proceso\fP
+Comprueba los procesos con el nombre
+.I nombre-proceso
+(según
+.BR /proc/\fIpid\fB/stat\fP ).
+.TP
+\fB-s\fP|\fB--signal\fP \fIseñal\fP
+Junto con
+.BR --stop ,
+especifica la señal enviada al proceso que se desea parar (15 por omisión).
+.TP
+\fB-R\fP|\fB--retry\fP \fItiempo-de-espera\fP|\fIacción-programada\fP
+Junto con
+.BR --stop ,
+especifica que
+.B start-stop-daemon
+compruebe que el proceso o los procesos han terminado. Lo comprobará
+repetidas veces hasta que no haya ningún proceso que coincida. Si el proceso
+no termina tomará una decisión determinada por
+.I acción-programada .
+
+Si se especifica
+.I tiempo-de-espera
+en vez de
+.I acción-programada
+entonces se usa la secuencia
+.IB señal / tiempo-de-espera /KILL/ tiempo-de-espera
+, donde
+.I señal
+es la señal especificada por
+.BR --signal .
+
+.I acción-programada
+es una lista de al menos dos artículos separados por barras
+.RB ( / );
+cada artículo puede ser un
+.BI - número de señal
+o [\fB\-\fP]\fInombre de señal\fP,
+que significa que se debe mandar esa señal, o
+.IR tiempo-de-espera,
+que significa que se debe esperar esos segundos para que el programa
+termine, o
+.BR forever ,
+que significa que se repite el resto de acción-programada para siempre
+si es necesario.
+
+Si se alcanza el final de la acción-programada y no se ha especificado
+.BR forever
+, entonces
+.B start-stop-daemon
+termina con un estado de error 2.
+Si se especifica una secuencia, entonces cualquier señal especificada
+con
+.B --signal
+no se tendrá en cuenta.
+.TP
+\fB-a\fP|\fB--startas\fP \fIpathname\fP
+Con
+.BR --start ,
+comienza el proceso especificado por
+.IR pathname .
+Si no se especifica, se usarán los argumentos dados con
+.BR --exec .
+.TP
+.BR -t | --test
+Muestra las acciones que se realizarían y devuelve el valor
+apropiado, pero no hace nada.
+.TP
+.BR -o | --oknodo
+Devuelve un estado 0 en vez de 1 si no se realiza (realizasen)
+ninguna acción.
+.TP
+.BR -q | --quiet
+No muestra mensajes informativos, sólo muestra mensajes de error.
+.TP
+\fB-c\fP|\fB--chuid\fP \fInombre-usuario\fR|\fIuid\fP
+Cambia a este usuario/uid antes de empezar el proceso. Además puede
+especificar el grupo añadiendo
+.BR : ,
+luego el grupo o el gid del mismo modo que haría con la orden
+`chown' (\fIusuario\fP\fB:\fP\fIgrupo\fP).
+Debe de darse cuenta que cuando se usa esta opción el grupo primario
+y complementario se cambian también, incluso si no se especifica
+.B --group .
+La opción
+.B --group
+es sólo para grupos de los que el usuario no es miembro (como el grupo
+nobody ).
+.TP
+\fB-r\fP|\fB--chroot\fP \fIdirectorio-raíz
+Efectua chdir y chroot a
+.I directorio-raíz
+antes de empezar el proceso. Dese cuenta que el fichero del pid
+también es escrito después de hacer el chroot.
+.TP
+\fB-d\fP|\fB--chdir\fP \fIdirectorio\fP
+Efectua chdir a
+.I directorio
+antes de empezar el proceso. Esto se hace después de efectuar chroot, si es que
+la opción
+\fB-r\fP|\fB--chroot\fP está establecida.
+.TP
+.BR -b | --background
+Usado típicamente con programas que no se separan por sí mismos. Esta
+opción forzará
+.B start-stop-daemon
+a hacer fork antes de empezar el proceso, y luego dejarlo en segundo plano.
+.B ATENCIÓN: start-stop-daemon
+no puede comprobar el estado de salida si el proceso no puede ejecutarse
+por
+.B cualquier
+razón. Esto se hace como último recurso, y sólo tiene sentido usarla en
+programas donde no tiene sentido que hagan fork por sí mismos, o no es
+factible añadir el código para que lo hagan por sí mismos.
+.TP
+\fB-N\fP|\fB--nicelevel\fP \fIentero\fP
+Altera la prioridad del proceso antes de empezarlo.
+.TP
+.BR -m | --make-pidfile
+Se usa cuando se quiere comenzar un programa que no crea su propio
+fichero de pid. Esta opción hace que
+.B start-stop-daemon
+cree el fichero referido con
+.B --pidfile
+y coloque el pid dentro de él justo antes de ejecutar el
+proceso. Dese cuenta que no se borrará cuando termine el programa.
+.B NOTA:
+Esta característica no funciona en todos los casos. Más notablemente
+cuando el programa que se ejecuta hace fork en su proceso principal.
+Por esto solamente es útil cuando se combina con la opción
+.B --background .
+.TP
+.BR -v | --verbose
+Muestra mensajes informativos detallados.
+.TP
+.BR -H | --help
+Muestra la ayuda y luego termina.
+.TP
+.BR -V | --version
+Muestra la versión y luego termina.
+
+.SH AUTORES
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> basada en una
+versión previa de Ian Jackson <ian@chiark.greenend.org.uk>.
+
+Página del manual de Klee Dienes <klee@mit.edu>, reformada
+parcialmente por Ian Jackson.
+
+Traducida por Rubén Porras <nahoo@inicia.es>
+Revisada por Santiago Vila <sanvila@unex.es>
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/fr
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.TH START\-STOP\-DAEMON 8 "15th March 1997" "Debian Project" "Debian GNU/Linux"
+.\" traduction de la version cvs 1.15
+.SH NOM
+start\-stop\-daemon \- lance ou arrête des démons-systèmes
+.SH SYNOPSIS
+.B start-stop-daemon
+.BR -S |--start
+.IR options
+.RB [ \-\- ]
+.IR arguments
+.HP
+.B start-stop-daemon
+.BR -K | --stop
+.IR options
+.HP
+.B start-stop-daemon
+.BR -H | --help
+.HP
+.B start-stop-daemon
+.BR -V | --version
+.SH DESCRIPTION
+On se sert de
+.B start\-stop\-daemon
+pour contrôler la création ou l'arrêt de processus-système.
+On peut configurer
+.B start\-stop\-daemon
+avec les options
+.BR --exec ", " --pidfile ", " --user ", et " --name
+pour trouver les exemplaires présents d'un processus en fonctionnement.
+
+Avec l'action
+.BR --start,
+.B start\-stop\-daemon
+vérifie l'existence d'un processus particulier.
+Quand existe un tel processus,
+.B start\-stop\-daemon
+ne fait rien et se termine avec un code d'erreur égal à 1 (0 si
+.BR --oknodo
+est précisé).
+Quand un tel processus n'existe pas, un exemplaire de l'exécutable est lancé
+avec
+.BR --exec,
+(ou, si c'est précisé, avec
+.BR --startas).
+Tout argument donné après
+.BR --
+sur la ligne de commande est passé tel quel au programme qui doit être lancé.
+Si
+.B --retry
+est indiqué,
+.B start\-stop\-daemon
+vérifie que le (ou les) processus s'est terminé.
+
+Avec l'action
+.BR --stop,
+.B start\-stop\-daemon
+vérifie aussi l'existence d'un processus particulier.
+Quand un tel processus existe
+.B start\-stop\-daemon
+lui envoie le signal précisé avec
+.BR --signal,
+et se termine avec un code d'erreur égal à 0.
+Quand un tel processus n'existe pas
+.B start\-stop\-daemon
+se termine avec un code d'erreur égal à 1
+(0 if
+.BR --oknodo
+est précisé).
+
+.SH OPTIONS
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIexécutable\fP
+Cherche les processus qui sont des exemplaires de cet exécutable (selon
+.B /proc/\fIpid\fB/exe\fP).
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIpid-file\fP
+Cherche les processus dont les identifiants sont précisés dans
+.IR pid-file.
+.TP
+\fB-u\fP|\fB--user\fP \fInom-d-utilisateur\fP|\fIuid\fP
+Cherche les processus qui appartiennent à l'utilisateur défini par
+.I nom-d-utilisateur
+ou
+.IR uid.
+.TP
+\fB-g\fP|\fB--group\fP \fIgroup\fP|\fIgid\fP
+Modifie le \fIgroup\fP ou le \fIgid\fP au début du processus.
+.TP
+\fB-n\fP|\fB--name\fP \fInom-de-processus\fP
+Cherche les processus dont le nom est
+.I nom-de-processus
+(selon
+.B /proc/\fIpid\fB/stat\fP).
+.TP
+\fB-s\fP|\fB--signal\fP \fIsignal\fP
+Avec l'action
+.BR --stop,
+on définit le signal à envoyer au processus qui doit être arrêté
+(par défaut : signal 15).
+.TP
+\fB-R\fP|\fB--retry\fP \fIdurée\fP|\fIaction-prévue\fP
+Avec l'action
+.BR --stop,
+.B start-stop-daemon
+doit vérifier que les processus se sont terminés. Il le fait pour tous les
+processus correspondants qui tournent, jusqu'à ce qu'il n'y en ait plus.
+Quand le processus ne se termine pas, il prend d'autres mesures déterminées
+par l'action-prévue.
+
+Si
+.I durée
+est indiqué plutôt que
+.I action-prévue,
+l'action-prévue
+.IB signal / durée /KILL/ durée
+est utilisé, où
+.I signal
+est le signal indiqué par
+.BR --signal.
+
+.I action-prévue
+est une liste d'au moins deux items séparés par des barres obliques
+.RB ( / )\ ;
+Chaque item peut être de la forme
+.BI - signal-number
+ou de la forme [\fB\-\fP]\fIsignal-name\fP,
+ce qui demande d'envoyer ce signal\ ;
+ou bien de la forme
+.IR durée,
+ce qui demande d'attendre tant de secondes avant de terminer les processus,
+ou bien de la forme
+.BR forever ,
+ce qui demande de répéter constamment le reste de action-prévue, si nécessaire.
+
+Quand la fin de l'action-prévue est atteinte et que
+.BR forever
+n'a pa été précisé,
+.B start-stop-daemon
+se termine avec un code d'erreur égal à 2.
+Quand une action-prévue est indiquée, tout signal donné par
+.B --signal
+est ignoré.
+.TP
+.I -a | --startas chemin/nom
+Avec l'action
+.B --start
+, lance le processus spécifié par
+.I chemin/nom.
+Si rien n'est précisé, c'est par défaut l'argument donné à
+.B --exec.
+.TP
+.I -t | --test
+Affiche les actions qui seraient entreprises et détermine la bonne valeur de
+retour, mais ne fait rien.
+.TP
+.I -o | --oknodo
+Retourne un code de sortie égal à 0 au lieu de 1 si rien n'est ou ne sera fait.
+.TP
+.I -q | --quiet
+N'affiche pas de messages d'information ; affiche seulement les messages
+d'erreur.
+.TP
+.I -c | --chuid
+Change l'utilisateur ou l'identifiant avant de lancer le processus.
+On peut aussi préciser un groupe an ajoutant un « : », puis le groupe ou un
+identifiant de la même façon qu'avec la commande « chown »
+(utilisateur:groupe). Quand on utilise cette option, on doit s'apercevoir
+que les groupes primaires ainsi que les groupes supplémentaires sont aussi
+déterminés, même si l'option « group » n'est pas spécifiée. L'option « group »
+sert seulement pour les groupes dont l'utilisateur n'est pas un membre régulier
+(c'est comme rendre membres d'un groupe-processus des utilisateurs
+génériques comme « nobody »).
+.TP
+.I -r | --chroot root
+Change de répertoire racine pour
+.B root
+avant de lancer le processus. Remarquez que le « pidfile » est aussi écrit
+après le changement de racine.
+.TP
+\fB-d\fP|\fB--chdir\fP \fIpath\fP
+Change de répertoire pour
+.I chemin
+avant de commencer le processus. Cela est fait avant le changement de
+répertoire racine si l'option \fB-r\fP|\fB--chroot\fP est demandée.
++.TP
+.I -b | --background
+est utilisé de manière classique pour les programmes qui ne « se détachent »
+pas d'eux-mêmes. Cette option oblige
+.B start-stop-daemon
+à se dupliquer (fork) avant de lancer le processus, et l'oblige à passer en
+arrière-plan.
+.B AVERTISSEMENT :
+start-stop-daemon
+ne peut pas vérifier le code de sortie quand, pour
+.B une raison ou une autre,
+le processus échoue.
+C'est un expédient dont on se servira seulement pour des programmes dont la
+duplication n'a pas de sens ou bien des programmes dont le code
+n'est pas transformable pour leur ajouter cette fonctionnalité.
+.TP
+\fB-N\fP|\fB--nicelevel\fP \fIint\fP.
+Cela modifie la priorité du processus avant qu'il ne soit lancé.
+.TP
+.I -m | --make-pidfile
+Est utilisé lors du lancement d'un programme qui ne crée pas son propre
+fichier identificateur. Cette option dit à
+.B start-stop-daemon
+de créer le fichier référencé par
+.B --pidfile
+et place le « pid » dans ce fichier juste avant d'exécuter le processus.
+Il faut remarquer que ce fichier n'est pas supprimé quand le programme
+s'arrête.
+.B NOTE :
+il se peut que cette caractéristique ne marche pas dans tous les cas. Et
+notamment quand le programme qui est exécuté se duplique. À cause de cela,
+cette option n'est habituellement utile que combinée avec l'option
+.B --background.
+.TP
+.I -v | --verbose
+Affiche des messages prolixes de renseignements.
+.TP
+.I -H | --help
+Affiche une aide et se termine.
+.TP
+.I -V | --version
+Affiche le numéro de version et se termine.
+
+.SH AUTEURS
+Ian Jackson <ian@chiark.greenend.org.uk>
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>
+Page de manuel par Klee Dienes <klee@mit.edu>.
+.SH TRADUCTION
+Philippe Batailler <pbatailler@teaser.fr>, Octobre 2003.
\ No newline at end of file
--- /dev/null
+.TH GENHOSTID 1
+.SH NAME
+genhostid \- generate and set a hostid for the current host
+.SH SYNOPSIS
+.B genhostid
+
+.SH DESCRIPTION
+\fBgenhostid\fR generates a random hostid and stores it in /etc/hostid,
+if /etc/hostid does not already exist.
+
+.SH "SEE ALSO"
+hostid(1), gethostid(2), sethostid(2)
--- /dev/null
+.\" A man page for getkey(1). -*- nroff -*-
+.\"
+.\" Copyright (C) 2006 Red Hat, Inc. All rights reserved.
+.\"
+.\" This copyrighted material is made available to anyone wishing to use,
+.\" modify, copy, or redistribute it subject to the terms and conditions of the
+.\" GNU General Public License v.2.
+.\"
+.\" This program is distributed in the hope that it will be useful, but WITHOUT
+.\" ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+.\" FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+.\" more details.
+.\"
+.\" You should have received a copy of the GNU General Public License along
+.\" with this program; if not, write to the Free Software Foundation, Inc.,
+.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+.\"
+.\" Author: Miloslav Trmac <mitr@redhat.com>
+.TH getkey 1 "Jan 2006"
+
+.SH NAME
+getkey \- wait until a key is pressed
+
+.SH SYNOPSIS
+\fBgetkey\fR [\fIOPTION\fR]... [\fIKEYS\fR]
+
+.SH DESCRIPTION
+.B getkey
+waits until one of
+.I KEYS
+is pressed.
+If
+.I KEYS
+are not specified, any key is accepted.
+.I KEYS
+are matched case-insensitive.
+
+.SH EXIT STATUS
+.B getkey
+exits with status 0 if one of the expected keys is pressed.
+If invalid arguments are specified,
+.B getkey
+exits with status 255.
+If
+.B getkey
+is interrupted or the wait times out,
+.B getkey
+exits with other non-zero status.
+
+.SH OPTIONS
+.TP
+\fB\-c\fR, \fB\-\-wait\fR \fISECONDS\fR
+Wait only for
+.I SECONDS
+seconds.
+The default is 0, which means to wait without a time limit.
+
+.TP
+\fB\-i\fR, \fB\-\-ignore\-control\-chars\fR
+Don't treat Ctrl+C and Ctrl+D specially.
+When this option is not specified, these characters interrupt \fBgetkey\fR.
+
+.TP
+\fB\-m\fR, \fB\-\-message\fR \fIMESSAGE\fR
+Display
+.I MESSAGE
+while waiting.
+The message is used as a format string in
+.BR sprintf (3),
+with a single argument, the number of seconds left.
+Typical usage is therefore
+\fB"Press a key within %d seconds to ..."\fR.
+If
+.I MESSAGE
+contains other format string directives, the behavior is undefined and
+.B getkey
+may crash.
+
+If there is no time limit specified,
+the number of seconds left is reported as 0.
--- /dev/null
+.TH initlog 8 "Sun Jan 24 1999"
+.SH NAME
+initlog \- log messages and events to the system logger
+.SH SYNOPSIS
+.B initlog
+[\-cefnpqrs] [\-\-cmd=ARG] [\-\-event=ARG] [\-\-facility=ARG]
+[\-\-name=ARG] [\-\-priority=ARG] [\-\-run=ARG] [\-\-string=ARG]
+.SH DESCRIPTION
+\fBinitlog\fR logs messages and events to the system logger.
+It is mainly designed for use in init scripts. initlog
+reads a configuration file
+.I /etc/initlog.conf
+by default, to determine its settings. Any line preceded with a
+.I #
+is a comment, and the following configuration directives
+are recognized:
+.TP
+.I facility <logging facility>
+Sets the default logging facility
+.TP
+.I priority <logging priority>
+Sets the default logging priority
+.TP
+.I ignore <regexp>
+Messages that match the regular expression will not be logged.
+.TP
+initlog behavior can also be configured by command-line options.
+
+.SS OPTIONS
+.TP
+.I "\-c, \-\-cmd=[program]"
+Execute the specified program, logging anything output to
+stdout or stderr.
+.TP
+.I "\-e, \-\-event=[number]"
+Logs that the specified event happened. Used in conjuction
+with \fB\-\-name\fR. Currently specified events are:
+.PD 0
+.RS 8n
+.TP 3n
+.B 1
+the action completed successfully
+.TP
+.B 2
+the action failed
+.TP
+.B 3
+the action was cancelled at user request
+.TP
+.B 4
+the action failed due to the failure of a dependent action
+.RE
+.PD
+.TP
+.I "\-f, \-\-facility=[facility]"
+Log at the specified syslog facility. The default
+is \fBdaemon\fR (see syslog(3)).
+.TP
+.I "\-n, \-\-name=[string]"
+Log the event under the specified string, such as
+"inetd".
+.TP
+.I "\-p, \-\-priority=[priority]"
+Log at the specified syslog priority. The default
+is \fBnotice\fR (see syslog(3)).
+.TP
+.I "\-q"
+Do not print the program's output, unless it exits
+with a non-zero exit code.
+.TP
+.I "\-r, \-\-run=[program]"
+Execute the specified program, with an open file
+descriptor so that the program can pass back
+commands to initlog.
+.TP
+.I "\-s, \-\-string=[string]"
+Log the specified string to the logger.
+.TP
+.I "\-\-conf=[file]"
+Specifies an alternate configuration file.
+.SH FILES
+.I /etc/initlog.conf
+.SH "SEE ALSO"
+syslog(3), logger(1)
--- /dev/null
+.TH IPCALC 1 "April 30 2001" "Red Hat, Inc." RH \" -*- nroff -*-
+.SH NAME
+ipcalc \- perform simple manipulation of IP addresses
+.SH SYNOPSIS
+.B ipcalc
+[\fIOPTION\fR]... <\fBIP address\fR>[\fI/prefix\fR] [\fInetmask\fR]
+
+.SH DESCRIPTION
+\fBipcalc\fR provides a simple way to calculate IP information for a host.
+The various options specify what information \fBipcalc\fR should display
+on standard out. Multiple options may be specified. An IP address to
+operate on must always be specified. Most operations also require a
+netmask or a CIDR prefix as well.
+
+.SH OPTIONS
+.TP
+.TP
+\fB\-b\fR, \fB\-\-broadcast\fR
+Display the broadcast address for the given IP address and netmask.
+
+.TP
+\fB\-h\fR, \fB\-\-hostname\fR
+Display the hostname for the given IP address.
+
+.TP
+\fB\-m\fR, \fB\-\-netmask\fR
+Calculate the netmask for the given IP address. It assumes that the IP
+address is in a complete class A, B, or C network. Many networks do
+not use the default netmasks, in which case an inappropriate value will
+be returned.
+
+.TP
+\fB\-p\fR, \fB\-\-prefix\fR
+Show the prefix for the given mask/IP address.
+
+.TP
+\fB\-n\fR, \fB\-\-network\fR
+Display the network address for the given IP address and netmask.
+
+.TP
+\fB\-s\fR, \fB\-\-silent\fR
+Don't ever display error messages.
+
+.SH AUTHORS
+.nf
+Erik Troan <ewt@redhat.com>
+.nf
+Preston Brown <pbrown@redhat.com>
+.fi
+.SH "REPORTING BUGS"
+Report bugs to our bugtracking system:
+http://bugzilla.redhat.com/bugzilla.
+.SH COPYRIGHT
+Copyright \(co 1997-2001 Red Hat, Inc.
+.br
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
+PURPOSE.
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/ja
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.\"original revision: 1.15.2.2
+.\"
+.\" Translated Wed May 13 17:28:56 JST 1998
+.\" by Hidenobu NABETANI <nabetani@kern.phys.sci.osaka-u.ac.jp>
+.\" Last modified: Tue Nov 11 14:24:54 JST 2003
+.\"
+.\" WORD: infomational message »²¹Í¾ðÊó
+.\" WORD: instance ¥¤¥ó¥¹¥¿¥ó¥¹
+.\"
+.TH START\-STOP\-DAEMON 8 "15th March 1997" "Debian Project" "dpkg utilities"
+.SH ̾Á°
+start\-stop\-daemon \- ¥·¥¹¥Æ¥à¥Ç¡¼¥â¥ó¥×¥í¥°¥é¥à¤Îµ¯Æ°¡¢Ää»ß
+.SH ½ñ¼°
+.B start-stop-daemon
+.BR -S | --start
+.IR options
+.RB [ \-\- ]
+.IR arguments
+.HP
+.B start-stop-daemon
+.BR -K | --stop
+.IR options
+.HP
+.B start-stop-daemon
+.BR -H | --help
+.HP
+.B start-stop-daemon
+.BR -V | --version
+.SH ÀâÌÀ
+.B start\-stop\-daemon
+¤Ï¥·¥¹¥Æ¥à¥ì¥Ù¥ë¤Î¥×¥í¥»¥¹¤ÎÀ¸À®¤äÄä»ß¤òÀ©¸æ¤¹¤ë¤¿¤á¤Ë»ÈÍѤµ¤ì¤ë¡£
+¤Þ¤¿¡¢
+.BR --exec ", " --pidfile ", " --user ", " --name
+¥ª¥×¥·¥ç¥ó¤ò»ØÄꤹ¤ë¤³¤È¤Ç¡¢¼Â¹ÔÃæ¤Î¥×¥í¥»¥¹¤ò¸«¤Ä¤±¤ë¤³¤È¤¬¤Ç¤¤ë¡£
+
+.BR --start
+¤ò»ÈÍѤ¹¤ë¤È¡¢
+.B start\-stop\-daemon
+¤Ï»ØÄꤵ¤ì¤¿¥×¥í¥»¥¹¤¬Â¸ºß¤¹¤ë¤«¤òÄ´¤Ù¤ë¡£
+³ºÅö¤¹¤ë¥×¥í¥»¥¹¤¬Â¸ºß¤¹¤ë¾ì¹ç¡¢
+.B start\-stop\-daemon
+¤Ï²¿¤â¤»¤º¡¢¥¨¥é¡¼¥¹¥Æ¡¼¥¿¥¹ 1 ¤òÊÖ¤·¤Æ½ªÎ»¤¹¤ë(
+.BR --oknodo
+¤¬»ØÄꤵ¤ì¤¿¾ì¹ç¤Ï¡¢0 ¤òÊÖ¤¹)¡£³ºÅö¤¹¤ë¥×¥í¥»¥¹¤¬Â¸ºß¤·¤Ê¤¤¾ì¹ç¡¢
+.BR --exec
+¤Ë¤è¤ê(Ëô¤Ï¡¢
+.BR --startas
+¤¬»ØÄꤵ¤ì¤¿¾ì¹ç¤Ï¤³¤ì¤Ë¤è¤ê
+)»ØÄꤵ¤ì¤ë¼Â¹Ô¥Õ¥¡¥¤¥ë¤òµ¯Æ°¤¹¤ë¡£
+¥³¥Þ¥ó¥É¥é¥¤¥ó¾å¤Ç
+.BR --
+°Ê¹ß¤ËÍ¿¤¨¤é¤ì¤¿Ç¤°Õ¤Î°ú¿ô¤Ïµ¯Æ°¤µ¤ì¤ë¥×¥í¥°¥é¥à¤Ë¤½¤Î¤Þ¤Þ°ú¤
+ÅϤµ¤ì¤ë¡£¤â¤·
+.B --retry
+¤¬»ØÄꤵ¤ì¤¿¾ì¹ç¡¢
+.B start-stop-daemon
+¤Ï¤½¤Î¥×¥í¥»¥¹¤¬½ªÎ»¤·¤¿¤«¤É¤¦¤«¤ò
+³Îǧ¤¹¤ë¡£
+
+.BR --stop
+¤ò»ÈÍѤ¹¤ë¤È¡¢
+.B start\-stop\-daemon
+¤Ï»ØÄꤵ¤ì¤¿¥×¥í¥»¥¹¤¬Â¸ºß¤¹¤ë¤«¤òÄ´¤Ù¤ë¡£³ºÅö¤¹¤ë¥×¥í¥»¥¹¤¬Â¸ºß¤¹
+¤ë¾ì¹ç¡¢
+.B start\-stop\-daemon
+¤Ï
+.BR --signal
+¤Ë¤è¤ê»ØÄꤵ¤ì¤¿¥·¥°¥Ê¥ë¤ò¤½¤Î¥×¥í¥»¥¹¤ËÁ÷¤ê¡¢¥¨¥é¡¼¥¹¥Æ¡¼¥¿¥¹ 0
+¤òÊÖ¤·¤Æ½ªÎ»¤¹¤ë¡£³ºÅö¤¹¤ë¥×¥í¥»¥¹¤¬Â¸ºß¤·¤Ê¤¤¾ì¹ç¡¢
+.B start\-stop\-daemon
+¤Ï¥¨¥é¡¼¥¹¥Æ¡¼¥¿¥¹ 1 ¤òÊÖ¤·¤Æ½ªÎ»¤¹¤ë(
+.BR --oknodo
+¤¬»ØÄꤵ¤ì¤¿¾ì¹ç¤Ï 0 ¤òÊÖ¤¹)¡£
+
+.SH ¥ª¥×¥·¥ç¥ó
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIexecutable\fP
+(
+.B /proc/\fIpid\fB/exe\fP
+¤Ë¤è¤ê)»ØÄꤵ¤ì¤¿ executable ¤Î¥×¥í¥»¥¹¤òÄ´¤Ù¤ë¡£
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIpid-file\fP
+.IR pid-file
+¤Ç»ØÄꤵ¤ì¤ë¥×¥í¥»¥¹ ID ¤ò»ý¤Ä¥×¥í¥»¥¹¤òÄ´¤Ù¤ë¡£
+.TP
+\fB-u\fP|\fB--user\fP \fIusername\fP|\fIuid\fP
+.I username
+¤Þ¤¿¤Ï
+.I uid
+¤Ç»ØÄꤵ¤ì¤ë¥æ¡¼¥¶¤¬½êͤ¹¤ë¥×¥í¥»¥¹¤òÄ´¤Ù¤ë¡£
+.TP
+\fB-g\fP|\fB--group\fP \fIgroup\fP|\fIgid\fP
+¥×¥í¥»¥¹¤ò³«»Ï¤¹¤ë»þÅÀ¤Ç¡¢\fIgroup\fP ¤ä \fIgid\fP ¤òÊѹ¹¤¹¤ë¡£
+.TP
+\fB-n\fP|\fB--name\fP \fIprocess-name\fP
+(
+.BR /proc/\fIpid\fB/stat\fP
+¤Ë¤è¤ê)
+.I process-name
+¤È¤¤¤¦Ì¾¤Î¥×¥í¥»¥¹¤òÄ´¤Ù¤ë¡£
+.TP
+\fB-s\fP|\fB--signal\fP \fIsignal\fP
+.BR --stop
+¤¬Æ±»þ¤ËÍ¿¤¨¤é¤ì¤¿»þ¡¢¥×¥í¥»¥¹¤òÄä»ß¤¹¤ë¤¿¤á¤ËÁ÷¤ë¥·¥°¥Ê¥ë¤ò»ØÄꤹ¤ë
+(¥Ç¥Õ¥©¥ë¥È¤Ï 15)¡£
+.TP
+\fB-R\fP|\fB--retry\fP \fItimeout\fP|\fIschedule\fP
+Ʊ»þ¤Ë
+.BR --stop
+¤¬Í¿¤¨¤é¤ì¤ë¤È
+.B start-stop-daemon
+¤Ï¤É¤Î¥×¥í¥»¥¹¤ò½ªÎ»¤µ¤»¤ë¤«¤ò³Îǧ¤¹¤ë¡£
+¥Þ¥Ã¥Á¤·¤¿¼Â¹ÔÃæ¤Î¥×¥í¥»¥¹¤¬Á´¤Æ½ªÎ»¤¹¤ë¤Þ¤Ç·«¤êÊÖ¤·³Îǧ¤¹¤ë¡£
+¤â¤·¥×¥í¥»¥¹¤¬½ªÎ»¤·¤Ê¤±¤ì¤Ð¡¢
+.I schedule
+¤Ë¤è¤ê·èÄꤵ¤ì¤ë
+Ê̤Υ¢¥¯¥·¥ç¥ó¤¬¼Â¹Ô¤µ¤ì¤ë¡£
+¤â¤·
+.I timeout
+¤¬
+.I schedule
+¤Î¤«¤ï¤ê¤Ë»ØÄꤵ¤ì¤Æ¤¤¤ë¤È¡¢
+.IB signal / timeout /KILL/ timeout
+¤¬»È¤ï¤ì¤ë¡£¤³¤³¤Ç
+.I signal
+¤Ï
+.BR --signal
+¤Ç»ØÄꤵ¤ì¤ë¥·¥°¥Ê¥ë¤Ç¤¢¤ë¡£
+
+.I schedule
+¤Ï¥¹¥é¥Ã¥·¥å
+.RB ( / )
+¤Ç¶èÀÚ¤é¤ì¤¿¾¯¤Ê¤¯¤È¤â2¤Ä¤ÎÍ×ÁǤ«¤é¤Ê¤ë¥ê¥¹¥È¤Ç¤¢¤ë¡£
+¤½¤ì¤¾¤ì¤ÎÍ×ÁǤÏ
+.BI - signal-number
+¤â¤·¤¯¤Ï [\fB\-\fP]\fIsignal-name\fP
+¤Î¾ì¹ç¤ÏÁ÷¤ë¤Ù¤¥·¥°¥Ê¥ë¡¢
+.IR timeout
+¤Î¾ì¹ç¤Ï¥×¥í¥»¥¹¤¬½ªÎ»¤¹¤ë¤Î¤òÂÔ¤ÄÉÿô¡¢
+.BR forever
+¤Î¾ì¹ç¤Ï¤â¤·É¬Íפʤé»Ä¤ê¤Î
+.I schedule
+¤ò·«¤êÊÖ¤·Å¬ÍѤ¹¤ë¤³¤È¤ò°ÕÌ£¤¹¤ë¡£
+
+¤â¤·
+.I schedule
+¤òÁ´¤Æ»È¤Ã¤Æ¡¢
+.BR forever
+¤¬»ØÄꤵ¤ì¤Æ¤¤¤Ê¤¤¾ì¹ç¤Ï¡¢
+.B start-stop-daemon
+¤Ï¥¨¥é¡¼¾õÂÖ 2 ¤Ç½ªÎ»¤¹¤ë¡£
+¤â¤·
+.I schedule
+¤¬»ØÄꤵ¤ì¤Æ¤¤¤ì¤Ð¡¢
+.B --signal
+¤Ç»ØÄꤷ¤¿¥·¥°¥Ê¥ë¤Ï̵»ë¤µ¤ì¤ë¡£
+Ʊ»þ¤Ë
+.B --start
+¤¬Í¿¤¨¤é¤ì¤ë¤È¡¢
+.I pathname
+¤Ë¤è¤ê»ØÄꤵ¤ì¤ë¥×¥í¥»¥¹¤òµ¯Æ°¤¹¤ë¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤¬»ØÄꤵ¤ì¤Ê¤¤¾ì¹ç¡¢
+.B --exec
+¤ËÍ¿¤¨¤é¤ì¤ë°ú¿ô¤¬¥Ç¥Õ¥©¥ë¥È¤Ë¤Ê¤ë¡£
+.TP
+.BR -t | --test
+¼Â¹Ô¤·¤è¤¦¤È¤¹¤ë½èÍýÆâÍƤò½ÐÎϤ·¡¤¤½¤ì¤Ëȼ¤¤Å¬ÀÚ¤ÊÊÖ¤êÃͤ¬ÀßÄꤵ¤ì¤ë
+¤¬¡¢¼ÂºÝ¤Î½èÍý¤Ï¹Ô¤ï¤Ê¤¤¡£
+.TP
+.BR -o | --oknodo
+½èÍý¤¬²¿¤â¹Ô¤ï¤ì¤Ê¤¤(Ëô¤Ï¡¢¹Ô¤Ê¤ï¤ì¤è¤¦¤È¤â¤·¤Ê¤«¤Ã¤¿)¾ì¹ç¡¢
+½ªÎ»¥¹¥Æ¡¼¥¿¥¹ 1 ¤Î¤«¤ï¤ê¤Ë 0 ¤òÊÖ¤¹¡£
+.TP
+.BR -q | --quiet
+»²¹Í¾ðÊó¤ò½ÐÎϤ·¤Ê¤¤¡£¥¨¥é¡¼¥á¥Ã¥»¡¼¥¸¤Î¤ßɽ¼¨¡£
+.TP
+\fB-c\fP|\fB--chuid\fP \fIusername\fR|\fIuid\fP
+½èÍý¤ò³«»Ï¤¹¤ëÁ°¤Ë»ØÄꤵ¤ì¤¿¥æ¡¼¥¶Ì¾/¥æ¡¼¥¶ ID ¤ËÊѹ¹¤¹¤ë¡£
+.BR ':'
+¤Î¸å¤Ë
+¥°¥ë¡¼¥×̾¤Þ¤¿¤Ï¥°¥ë¡¼¥× ID ¤òÍ¿¤¨¤ë¤³¤È¤Ë¤è¤ê¥°¥ë¡¼¥×¤â»ØÄê¤Ç¤¤ë¡£
+¤³¤ì¤Ï `chown' ¥³¥Þ¥ó¥É¤ÈƱ¤¸½ñ¼° (\fIuser\fP\fB:\fP\fIgroup\fP)
+¤Ç¤¢¤ë¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤ò
+»ÈÍѤ·¤¿»þ¤Ë¤Ï¡¢
+.B --group
+¥ª¥×¥·¥ç¥ó¤¬»ØÄꤵ¤ì¤Æ¤¤¤Ê¤¤¾ì¹ç¤Ç¤¢¤Ã¤Æ¤â¥×¥é¥¤¥Þ¥ê¥°¥ë¡¼¥×¤È
+Êä½õ¥°¥ë¡¼¥×¤ÏƱÍͤËÀßÄꤵ¤ì¤ë¤³¤È¤òÍý²ò¤·¤Æ¤¤¤Ê¤±¤ì¤Ð¤Ê¤é
+¤Ê¤¤¡£
+.B --group
+¥ª¥×¥·¥ç¥ó¤Ï¡¢(
+.B nobody
+¤Î¤è¤¦¤Ê°ìÈÌŪ¥æ¡¼¥¶¤ËÂФ·¤Æ¥×¥í¥»¥¹Ã±°Ì¤Ç¥°¥ë¡¼¥×¤ËÄɲ乤ë¤È¤¤¤¦¤è¤¦¤Ë)
+¥æ¡¼¥¶¤¬Ä̾ï¤Î¥á¥ó¥Ð¡¼¤Ç¤Ê¤¤¥°¥ë¡¼¥×¤ò»ØÄꤹ¤ë¾ì¹ç¤Ë¤Î¤ß»ÈÍѤ¹¤ë¡£
+.TP
+\fB-r\fP|\fB--chroot\fP \fIroot\fP
+½èÍý¤ò³«»Ï¤¹¤ëÁ°¤Ë¡¢
+.I root
+¤Ë chdir ¤È chroot ¤ò¼Â¹Ô¤¹¤ë¡£pidfile ¤Ï chroot ¸å¤Ë¡¢½ñ¤½Ð¤µ¤ì¤ë¤³¤È
+¤ËÃí°Õ¤¹¤ë¡£
+.TP
+\fB-d\fP|\fB--chdir\fP \fIpath\fP
+¥×¥í¥»¥¹¤ò³«»Ï¤¹¤ëÁ°¤Ë¡¢
+.I path
+¤Ë chdir ¤¹¤ë¡£
+\fB-r\fP|\fB--chroot\fP ¥ª¥×¥·¥ç¥ó¤òƱ»þ¤Ë»ØÄꤷ¤¿¾ì¹ç¤Ï¡¢
+chroot ¤Î¤¢¤È¤Ë chdir ¤¹¤ë¡£
+.TP
+.BR -b | --background
+ŵ·¿Åª¤Ë¤Ï¡¢¥Ç¡¼¥â¥ó¥×¥í¥»¥¹¤òÀÚ¤êÎ¥¤»¤Ê¤¤¥×¥í¥°¥é¥à¤Ç»ÈÍѤµ¤ì¤ë¡£¤³¤Î¥ª¥×
+¥·¥ç¥ó¤ò»ØÄꤷ¤¿¾ì¹ç¡¢
+.B start-stop-daemon
+¤Ï¼«Ê¬¼«¿È¤òÂÐ¾Ý¥×¥í¥»¥¹¤Î¼Â¹ÔÁ°¤Ë fork ¤·¡¢°Ê¸å¥Ð¥Ã¥¯¥°¥é¥¦¥ó¥É¤Ç½èÍý¤ò¹Ô¤¦¡£
+.B ·Ù¹ð: start-stop-daemon
+¤Ï
+.B ²¿¤é¤«¤ÎÍýͳ
+¤Ë¤è¤Ã¤Æ½èÍý¤Î¼Â¹Ô¤Ë¼ºÇÔ¤·¤¿¾ì¹ç¤Ë¡¢¤½¤Î½ªÎ»¥¹¥Æ¡¼¥¿¥¹¤ò¥Á¥§¥Ã¥¯¤Ç¤¤Ê¤¤¡£
+¤³¤Î¥ª¥×¥·¥ç¥ó¤ÏºÇ½ª¼êÃʤǤ¢¤ê¡¢¼«Ê¬¤«¤é fork ¤¹¤ë¤³¤È¤Ë°ÕÌ£¤Î¤Ê¤¤¥×¥í¥°
+¥é¥à¤ä¡¢fork ¤ò¼«Ê¬¤Ç¹Ô¤¦¤¿¤á¤Î¥³¡¼¥É¤òÄɲäǤ¤Ê¤¤¥×¥í¥°¥é¥à¤Î¤ß¤Ç¤Î»ÈÍÑ
+¤ò°Õ¿Þ¤·¤Æ¤¤¤ë¡£
+.TP
+\fB-N\fP|\fB--nicelevel\fP \fIint\fP
+¥×¥í¥»¥¹¤ò³«»Ï¤¹¤ëÁ°¤Ë¥×¥í¥»¥¹¤Î¥×¥é¥¤¥ª¥ê¥Æ¥£¤òÊѹ¹¤¹¤ë¡£
+.TP
+.BR -m | --make-pidfile
+¼«Ê¬¼«¿È¤Ç PID ¥Õ¥¡¥¤¥ë¤òºîÀ®¤·¤Ê¤¤¥×¥í¥°¥é¥à¤òµ¯Æ°¤¹¤ëºÝ¤Ë»ÈÍѤ¹¤ë¡£
+¤³¤Î¥ª¥×¥·¥ç¥ó¤Ë¤è¤ê¡¢½èÍý¤Î¼Â¹ÔľÁ°¤Ë
+.B start-stop-daemon
+¤Ï
+.B --pidfile
+¤Ç»²¾È¤µ¤ì¤ë¥Õ¥¡¥¤¥ë¤òºîÀ®¤·¡¢ÇÛÃÖ¤¹¤ë¡£¤³¤Î¥Õ¥¡¥¤¥ë¤Ï¥×¥í¥°¥é¥à¤Î
+Ää»ß»þ¤Ëºï½ü¤µ¤ì¤Ê¤¤¤³¤È¤ËÃí°Õ¤µ¤ì¤¿¤¤¡£
+.B Ãí°Õ:
+¤³¤Î¥ª¥×¥·¥ç¥ó¤ÏÆ°ºî¤·¤Ê¤¤¾ì¹ç¤¬¤¢¤ë¡£Æäˡ¢¥×¥í¥°¥é¥à¤Î¼Â¹Ô»þ¤Ë¤½¤Î
+¥á¥¤¥ó¥×¥í¥»¥¹¤«¤é fork ¤¹¤ë¤è¤¦¤Ê¥×¥í¥°¥é¥à¤Ç¤ÏÀµ¤·¤¯Æ°ºî¤·¤Ê¤¤¡£
+¤³¤Î¤¿¤á¡¢Ä̾ï¤Ï
+.B --background
+¥ª¥×¥·¥ç¥ó¤ÈÊ»ÍѤ¹¤ë¾ì¹ç¤Ë¤Î¤ßÍÍѤǤ¢¤ë¡£
+.TP
+.BR -v | --verbose
+¾Ü¤·¤¤»²¹Í¾ðÊó¤ò½ÐÎϤ¹¤ë¡£
+.TP
+.BR -H | --help
+¥Ø¥ë¥×¾ðÊó¤ò½ÐÎϤ·¤Æ½ªÎ»¤¹¤ë¡£
+.TP
+.BR -v | --verbose
+¥Ð¡¼¥¸¥ç¥ó¾ðÊó¤ò½ÐÎϤ·¤Æ½ªÎ»¤¹¤ë¡£
+
+.SH Ãø¼Ô
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>
+¤¬Ian Jackson <ian@chiark.greenend.org.uk>¤Ë¤è¤ë°ÊÁ°¤Î¥Ð¡¼¥¸¥ç¥ó¤ò
+¸µ¤ËºîÀ®¡£
+
+¤³¤Î¥Þ¥Ë¥å¥¢¥ë¤Ï Klee Dienes <klee@mit.edu> ¤Ë¤è¤Ã¤Æ½ñ¤«¤ì¤¿¡£
+°ìÉô Ian Jackson ¤Ë¤è¤ëÀ°·Á¡£
+
+.SH ËÝÌõ¼Ô
+Æéë ±ÉŸ <nabe@debian.or.jp>
--- /dev/null
+.TH NETREPORT 1 "Red Hat, Inc." "RH" \" -*- nroff -*-
+.SH NAME
+netreport \- request notification of network interface changes
+.SH SYNOPSIS
+.B netreport
+\fI[\fP-r\fI]\fP
+.SH DESCRIPTION
+.B netreport
+tells the network management scripts to send a SIGIO signal
+to the process which called netreport when any network interface
+status changes occur.
+.SH OPTIONS
+.TP
+.B -r
+Remove the current request (if any) for the calling process.
+.PP
+.SH NOTES
+If a program does not call netreport with the
+.B -r
+option before it exits, and another process is created with the
+same PID before any changes take place in interface status, it
+is possible that the new process will receive a spurious SIGIO.
--- /dev/null
+.TH PPP-WATCH 8 "Red Hat, Inc." "RHS" \" -*- nroff -*-
+.SH NAME
+ppp-watch \- daemon to make PPP interfaces act more like other interfaces
+.SH SYNOPSIS
+.B ppp-watch
+\fIinterface-name\fP [boot]
+.SH DESCRIPTION
+.B ppp-watch
+manages one PPP connection, including starting, stopping, and redialing.
+It makes starting and stopping the connection synchronous activities.
+
+.B ppp-watch
+is not really meant to be called directly. It should only be used from
+within the ifup-ppp script.
+.SH OPTIONS
+.TP
+.I interface-name
+The name of the PPP interface to bring up.
+.TP
+boot
+ppp-watch is being called at boot time and should time out after a
+while if the PPP connection does not come up in order not to hang
+the boot sequence.
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/ru
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.\" Hey, Emacs! This is an -*- nroff -*- source file.
+.\"
+.\" Updated by <alexm@hsys.msk.ru> to r1.11 of start-stop-daemon.8 from CVS
+.\"
+.TH START\-STOP\-DAEMON 8 "15 ÍÁÒÔÁ 1997" "Debian Project" "Debian GNU/Linux"
+.SH éíñ
+start\-stop\-daemon \- ÚÁÐÕÓË É ÏÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÎÙÈ ÐÒÏÇÒÁÍÍ-ÄÅÍÏÎÏ×
+.SH ïâúïò
+.B start-stop-daemon
+.BR -S|--start
+.I ÆÌÁÇÉ
+.RB [ \-\- ]
+.IR ÁÒÇÕÍÅÎÔÙ
+.HP
+.B start-stop-daemon
+.BR -K|--stop
+.IR "ÆÌÁÇÉ ..."
+.HP
+.B start-stop-daemon
+.BR -H|--help
+.HP
+.B start-stop-daemon
+.BR -V|--version
+.SH ïðéóáîéå
+.B start\-stop\-daemon
+ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÕÐÒÁ×ÌÅÎÉÑ ÓÏÚÄÁÎÉÅÍ É ÚÁ×ÅÒÛÅÎÉÅÍ ÓÉÓÔÅÍÎÙÈ ÐÒÏÃÅÓÓÏ×.
+éÓÐÏÌØÚÕÑ ÆÌÁÇÉ
+.BR --exec ,
+.BR --pidfile ,
+.BR --user ,
+É
+.BR --name ,
+.B start\-stop\-daemon
+ÍÏÖÅÔ ÂÙÔØ ÎÁÓÔÒÏÅÎ ÄÌÑ ÐÏÉÓËÁ ÕÖÅ ÚÁÐÕÝÅÎÎÙÈ ÜËÚÅÍÐÌÑÒÏ×
+ÐÒÏÃÅÓÓÁ.
+
+.B start\-stop\-daemon
+Ó ÆÌÁÇÏÍ
+.B --start
+ÐÒÏ×ÅÒÑÅÔ ÓÕÝÅÓÔ×Ï×ÁÎÉÅ ÕËÁÚÁÎÎÏÇÏ ÐÒÏÃÅÓÓÁ. åÓÌÉ ÔÁËÏÊ ÐÒÏÃÅÓÓ ÓÕÝÅÓÔ×ÕÅÔ,
+.B start\-stop\-daemon
+ÎÉÞÅÇÏ ÎÅ ÄÅÌÁÅÔ É ÐÒÅËÒÁÝÁÅÔ ÒÁÂÏÔÕ Ó ËÏÄÏÍ ÚÁ×ÅÒÛÅÎÉÑ\~1 (ÉÌÉ\~0, ÅÓÌÉ ÚÁÄÁÎ
+ÆÌÁÇ
+.BR --oknodo ).
+åÓÌÉ ÖÅ ÔÁËÏÊ ÐÒÏÃÅÓÓ ÎÅ ÓÕÝÅÓÔ×ÕÅÔ, ÔÏ ÏÎ ÚÁÐÕÓËÁÅÔÓÑ, ÉÓÐÏÌØÚÕÑ ÌÉÂÏ
+ÉÓÐÏÌÎÑÅÍÙÊ ÆÁÊÌ, ÚÁÄÁÎÎÙÊ ÆÌÁÇÏÍ
+.BR --exec ,
+ÌÉÂÏ ÆÌÁÇÏÍ
+.BR --startas ,
+ÅÓÌÉ ÏÎ ÚÁÄÁÎ).
+áÒÇÕÍÅÎÔÙ, ÚÁÄÁÎÎÙÅ × ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÅ ÐÏÓÌÅ
+.BR -- ,
+ÂÕÄÕÔ ÂÅÚ ÉÚÍÅÎÅÎÉÊ ÐÅÒÅÄÁÎÙ ÚÁÐÕÓËÁÅÍÏÊ ÐÒÏÇÒÁÍÍÅ.
+åÓÌÉ ÕËÁÚÁÎ ÆÌÁÇ
+.BR --retry ,
+ÔÏ
+.B start-stop-daemon
+ÓÔÁÎÅÔ ÏÔÓÌÅÖÉ×ÁÔØ ÚÁ×ÅÒÛÅÎÉÅ ÐÒÏÃÅÓÓÁ(Ï×).
+
+.B start\-stop\-daemon
+Ó ÆÌÁÇÏÍ
+.BR --stop
+ÔÁËÖÅ ÐÒÏ×ÅÒÑÅÔ ÓÕÝÅÓÔ×Ï×ÁÎÉÅ ÚÁÄÁÎÎÏÇÏ ÐÒÏÃÅÓÓÁ.
+åÓÌÉ ÔÁËÏÊ ÐÒÏÃÅÓÓ ÓÕÝÅÓÔ×ÕÅÔ, ÔÏ
+.B start\-stop\-daemon
+ÐÏÓÙÌÁÅÔ ÅÍÕ ÓÉÇÎÁÌ, ÚÁÄÁÎÎÙÊ ÆÌÁÇÏÍ
+.BR --signal ,
+É ÐÒÅËÒÁÝÁÅÔ ÒÁÂÏÔÕ Ó ËÏÄÏÍ ÚÁ×ÅÒÛÅÎÉÑ\~0.
+åÓÌÉ ÖÅ ÔÁËÏÊ ÐÒÏÃÅÓÓ ÎÅ ÓÕÝÅÓÔ×ÕÅÔ, ÔÏ
+.B start\-stop\-daemon
+ÐÒÅËÒÁÝÁÅÔ ÒÁÂÏÔÕ Ó ËÏÄÏÍ ÚÁ×ÅÒÛÅÎÉÑ\~1 (ÉÌÉ\~0, ÅÓÌÉ ÚÁÄÁÎ ÆÌÁÇ
+.BR --oknodo ).
+
+.SH æìáçé
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIÉÓÐÏÌÎÑÅÍÙÊ_ÆÁÊÌ\fP
+ðÒÏ×ÅÒÑÅÔ ÐÒÏÃÅÓÓÙ, ËÏÔÏÒÙÅ Ñ×ÌÑÀÔÓÑ ÜËÚÅÍÐÌÑÒÁÍÉ ÄÁÎÎÏÇÏ ÉÓÐÏÌÎÑÅÍÏÇÏ ÆÁÊÌÁ
+(ÓÏÇÌÁÓÎÏ
+.BR /proc/\fP\fIpid\fB/exe ).
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIpid-ÆÁÊÌ\fP
+ðÒÏ×ÅÒÑÅÔ ÐÒÏÃÅÓÓÙ, ÞØÉ ÉÄÅÎÔÉÆÉËÁÔÏÒÙ ÐÒÏÃÅÓÓÁ ÚÁÐÉÓÁÎÙ ×
+.IR pid-ÆÁÊÌ .
+.TP
+\fB-u\fP|\fB--user\fP \fIÉÍÑ_ÐÏÌØÚÏ×ÁÔÅÌÑ\fP|\fIuid\fP
+ðÒÏ×ÅÒÑÅÔ ÐÒÏÃÅÓÓÙ, ÐÒÉÎÁÄÌÅÖÁÝÉÅ ÐÏÌØÚÏ×ÁÔÅÌÀ, ÕËÁÚÁÎÎÏÍÕ Ó ÐÏÍÏÝØÀ
+.I ÉÍÅÎÉ_ÐÏÌØÚÏ×ÁÔÅÌÑ
+ÉÌÉ
+.IR uid .
+.TP
+\fB-n\fP|\fB--name\fP \fIprocess-name\fP
+ðÒÏ×ÅÒÑÅÔ ÐÒÏÃÅÓÓÙ Ó ÉÍÅÎÅÍ
+.I process-name
+(ÓÏÇÌÁÓÎÏ
+.BR /proc/\fP\fIpid\fB/stat ).
+.TP
+\fB-s\fP|\fB--signal\fP \fIsignal\fP
+ðÒÉ ÉÓÐÏÌØÚÏ×ÁÎÉÉ ×ÍÅÓÔÅ Ó ÆÌÁÇÏÍ
+.BR --stop ,
+ÚÁÄÁ£Ô ÓÉÇÎÁÌ, ËÏÔÏÒÙÊ ÂÕÄÅÔ ÐÏÓÌÁÎ ÐÒÏÃÅÓÓÁÍ ÄÌÑ ÉÈ ÏÓÔÁÎÏ×Á
+(ÐÏ ÕÍÏÌÞÁÎÉÀ\~15).
+.TP
+\fB-R\fP|\fB--retry\fP \fIÔÁÊÍ-ÁÕÔ\fP|\fIÚÁÔÅÍ\fP
+ðÒÉ ÉÓÐÏÌØÚÏ×ÁÎÉÉ ×ÍÅÓÔÅ Ó ÆÌÁÇÏÍ
+.B --stop
+ÕËÁÚÙ×ÁÅÔ, ÞÔÏ
+.B start-stop-daemon
+ÄÏÌÖÅÎ ÐÒÏ×ÅÒÑÔØ ÓÌÅÄÉÔØ ÚÁ ÐÒÁ×ÉÌØÎÙÍ ÚÁ×ÅÒÛÅÎÉÅÍ ÐÒÏÃÅÓÓÁ.
+ðÅÒÉÏÄÉÞÅÓËÉ ÂÕÄÅÔ ÐÒÏ×ÅÒÑÔØÓÑ, ×ÙÐÏÌÎÑÀÔÓÑ ÌÉ ÅÝ£ ÕËÁÚÁÎÎÙÅ ÐÒÏÃÅÓÓÙ,
+ÄÏ ÔÅÈ ÐÏÒ, ÐÏËÁ ×ÓÅ ÏÎÉ ÎÅ ÚÁ×ÅÒÛÁÔÓÑ. åÓÌÉ ÐÒÏÃÅÓÓÙ ÎÅ ÚÁ×ÅÒÛÁÀÔÓÑ,
+ÔÏ ÂÕÄÅÔ ÐÒÅÄÐÒÉÎÑÔÏ ÄÅÊÓÔ×ÉÅ, ÚÁÄÁÎÎÏÅ × ÐÁÒÁÍÅÔÒÅ
+.IR ÚÁÔÅÍ .
+
+åÓÌÉ ×ÍÅÓÔÏ ÐÁÒÁÍÅÔÒÁ
+.I ÚÁÔÅÍ
+ÕËÁÚÁÎ
+.IR ÔÁÊÍ-ÁÕÔ ,
+ÔÏ ÉÓÐÏÌØÚÕÅÔÓÑ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÓÔØ ÄÅÊÓÔ×ÉÊ
+.IB ÓÉÇÎÁÌ / timeout /KILL/ timeout\fR,
+ÇÄÅ
+.IR signal "\~--"
+ÜÔÏ ÓÉÇÎÁÌ, ÚÁÄÁÎÎÙÊ ÆÌÁÇÏÍ
+.BR --signal .
+
+÷ÏÏÂÝÅ, ÐÁÒÁÍÅÔÒ
+.IR ÚÁÔÅÍ "\~--"
+ÜÔÏ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÓÔØ ÉÚ ÎÅ ÍÅÎÅÅ Ä×ÕÈ ÜÌÅÍÅÎÔÏ×, ÒÁÚÄÅÌ£ÎÎÙÈ ËÏÓÏÊ
+ÞÅÒÔÏÊ
+.RB ( / );
+ÐÒÉÞ£Í ËÁÖÄÙÊ ÜÌÅÍÅÎÔ -- ÜÔÏ ÌÉÂÏ
+.BI - ÎÏÍÅÒ-ÓÉÇÎÁÌÁ
+ÉÌÉ [\fB-\fP]\fIÎÁÚ×ÁÎÉÅ-ÓÉÇÎÁÌÁ\fP,
+ÉÌÉ
+.IR ÔÁÊÍ-ÁÕÔ ,
+ÚÁÄÁÀÝÉÊ ËÏÌÉÞÅÓÔ×Ï ÓÅËÕÎÄ, × ÔÅÞÅÎÉÅ ËÏÔÏÒÙÈ ÓÌÅÄÕÅÔ ÖÄÁÔØ ÚÁ×ÅÒÛÅÎÉÑ
+ÐÒÏÃÅÓÓÁ, ÉÌÉ ÖÅ ÓÌÏ×Ï
+.BR forever ,
+ÐÒÅÄÐÉÓÙ×ÁÀÝÅÅ ÐÏ×ÔÏÒÑÔØ ÏÓÔÁÔÏË ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÓÔÉ ÄÏ ÐÒÅÄÅÌÁ, ÅÓÌÉ
+ÎÕÖÎÏ.
+
+åÓÌÉ ÄÏÓÔÉÇÎÕÔ ËÏÎÅà ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÓÔÉ ÄÅÊÓÔ×ÉÊ, Á
+.B forever
+ÎÅ ÂÙÌÏ ÕËÁÚÁÎÏ, ÔÏ
+.B start-stop-daemon
+ÐÒÅËÒÁÝÁÅÔ ÒÁÂÏÔÕ Ó ËÏÄÏÍ ÚÁ×ÅÒÛÅÎÉÑ\~2.
+åÓÌÉ ÐÁÒÁÍÅÔÒ
+.I ÚÁÔÅÍ
+ÕËÁÚÁÎ, ÔÏ ÓÉÇÎÁÌ, ÚÁÄÁÎÎÙÊ Ó ÐÏÍÏÝØÀ ÆÌÁÇÁ
+.BR --signal ,
+ÉÇÎÏÒÉÒÕÅÔÓÑ.
+
+.TP
+\fB-a\fP|\fB--startas\fP \fIÐÏÌÎÏÅ_ÉÍÑ\fP
+ðÒÉ ÉÓÐÏÌØÚÏ×ÁÎÉÉ Ó ÆÌÁÇÏÍ
+.B --start
+ÚÁÐÕÓËÁÅÔ ÐÒÏÃÅÓÓ, ÕËÁÚÁÎÎÙÊ × ÐÁÒÁÍÅÔÒÅ
+.IR ÐÏÌÎÏÅ_ÉÍÑ .
+åÓÌÉ ÜÔÏÔ ÆÌÁÇ ÎÅ ÚÁÄÁÎ, ÔÏ ÂÅÒ£ÔÓÑ ÁÒÇÕÍÅÎÔ, ÚÁÄÁÎÎÙÊ ÆÌÁÇÏÍ
+.BR --exec .
+.TP
+.BR -t | --test
+îÁÐÅÞÁÔÁÔØ ÄÅÊÓÔ×ÉÑ, ËÏÔÏÒÙÅ ÄÏÌÖÎÙ ÂÙÔØ ×ÙÐÏÌÎÅÎÙ É ÕÓÔÁÎÏ×ÉÔØ ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÉÊ
+ËÏÄ ÚÁ×ÅÒÛÅÎÉÑ, ÎÏ ÎÅ ×ÙÐÏÌÎÑÔØ ÜÔÉ ÄÅÊÓÔ×ÉÑ.
+.TP
+.BR -o | --oknodo
+÷ÏÚ×ÒÁÝÁÔØ ËÏÄ\~0 ×ÍÅÓÔÏ\~1, ÅÓÌÉ ÎÅ ÂÙÌÏ ×ÙÐÏÌÎÅÎÏ (ÉÌÉ ÎÅ ÄÏÌÖÎÏ
+ÂÙÌÏ ÂÙÔØ ×ÙÐÏÌÎÅÎÏ) ÎÉËÁËÉÈ ÄÅÊÓÔ×ÉÊ.
+.TP
+.BR -q | --quiet
+îÅ ×ÙÄÁ×ÁÔØ ÉÎÆÏÒÍÁÃÉÏÎÎÙÈ ÓÏÏÂÝÅÎÉÊ; ÔÏÌØËÏ ÓÏÏÂÝÅÎÉÑ Ï ÏÛÉÂËÁÈ.
+.TP
+\fB-c\fP|\fB--chuid\fP \fIÉÍÑ-ÐÏÌØÚÏ×ÁÔÅÌÑ\fR|\fIuid\fP
+õÓÔÁÎÏ×ÉÔØ ÄÁÎÎÏÅ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ ÉÌÉ uid ÐÅÒÅÄ ÚÁÐÕÓËÏÍ ÐÒÏÃÅÓÓÁ. ÷Ù ÍÏÖÅÔÅ
+ÔÁËÖÅ ÚÁÄÁÔØ ÇÒÕÐÐÕ, ÄÏÂÁ×É× Ä×ÏÅÔÏÞÉÅ
+.BR : ,
+É ÉÍÑ ÇÒÕÐÐÙ ÉÌÉ gid, ËÁË × ËÏÍÁÎÄÅ `chown'
+(\fIÐÏÌØÚÏ×ÁÔÅÌØ\fP\fB:\fP\fIÇÒÕÐÐÁ\fP).
+ðÒÉ ÉÓÐÏÌØÚÏ×ÁÎÉÉ ÜÔÏÇÏ ÆÌÁÇÁ ×Ù ÄÏÌÖÎÙ ÐÏÎÉÍÁÔØ, ÞÔÏ ÏÓÎÏ×ÎÁÑ É
+ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÇÒÕÐÐÙ ÂÕÄÕÔ ÕÓÔÁÎÏ×ÌÅÎÙ, ÄÁÖÅ ÅÓÌÉ ÎÅ ÚÁÄÁÎ ÆÌÁÇ
+.BR --group .
+æÌÁÇ
+.B --group
+ÉÓÐÏÌØÚÕÅÔÓÑ ÔÏÌØËÏ ÄÌÑ ÇÒÕÐÐ, × ËÏÔÏÒÙÈ ÐÏÌØÚÏ×ÁÔÅÌØ ÏÂÙÞÎÏ ÎÅ
+ÓÏÓÔÏÉÔ (ÎÁÐÒÉÍÅÒ, × ÓÌÕÞÁÅ Ó ÓÉÓÔÅÍÎÙÍ ÐÏÌØÚÏ×ÁÔÅÌÅÍ `nobody').
+.TP
+\fB-r\fP|\fB--chroot\fB \fIroot\fP
+ðÅÒÅÄ ÚÁÐÕÓËÏÍ ÐÒÏÃÅÓÓÁ ÐÅÒÅÊÔÉ × ËÁÔÁÌÏÇ
+.I root
+É ÓÄÅÌÁÔØ ÅÇÏ ËÏÒÎÅ×ÙÍ (Ó ÐÏÍÏÝØÀ
+.BR chroot ).
+úÁÍÅÔØÔÅ, ÞÔÏ pid-ÆÁÊÌ ÂÕÄÅÔ ÓÏÚÄÁÎ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ ÎÏ×ÏÇÏ ËÏÒÎÅ×ÏÇÏ
+ËÁÔÁÌÏÇÁ.
+.TP
+.BR -b | --background
+üÔÏÔ ÆÌÁÇ ÏÂÙÞÎÏ ÉÓÐÏÌØÚÕÅÔÓÑ Ó ÐÒÏÇÒÁÍÍÁÍÉ, ËÏÔÏÒÙÅ ÎÅ ÍÏÇÕÔ ÓÁÍÉ
+ÏÔËÌÀÞÉÔØÓÑ ÏÔ ÔÅÒÍÉÎÁÌÁ, ÎÁ ËÏÔÏÒÏÍ ÏÎÉ ÚÁÐÕÝÅÎÙ. üÔÏÔ ÆÌÁÇ ÚÁÓÔÁ×ÉÔ
+.B start-stop-daemon
+ÓÄÅÌÁÔØ fork() ÐÅÒÅÄ ÚÁÐÕÓËÏÍ ÐÒÏÃÅÓÓÁ É ÕÊÔÉ × ÆÏÎÏ×ÙÊ ÒÅÖÉÍ.
+.B ÷îéíáîéå: start-stop-daemon
+ÎÅ ÍÏÖÅÔ ÐÒÏ×ÅÒÉÔØ ËÏÄ ×ÏÚ×ÒÁÔÁ, ÅÓÌÉ ÐÒÏÃÅÓÓ ÎÅ ÍÏÖÅÔ ÕÓÐÅÛÎÏ ×ÙÐÏÌÎÉÔØÓÑ ÐÏ
+.I ËÁËÏÊ ÂÙ ÔÏ ÎÉ ÂÙÌÏ
+ÐÒÉÞÉÎÅ. üÔÏ\~-- ÐÏÓÌÅÄÎÑÑ ×ÏÚÍÏÖÎÏÓÔØ, ÐÒÅÄÎÁÚÎÁÞÅÎÎÁÑ ÔÏÌØËÏ ÄÌÑ
+ÐÒÏÇÒÁÍÍ, ËÏÔÏÒÙÍ ÎÅ ÉÍÅÅÔ ÓÍÙÓÌÁ ×ÙÐÏÌÎÑÔØ fork() ÓÁÍÉÍ, ÉÌÉ ÅÓÌÉ ÎÅÔ
+×ÏÚÍÏÖÎÏÓÔÉ ÄÏÂÁ×ÉÔØ × ÎÉÈ ËÏÄ ÄÌÑ ÜÔÏÇÏ.
+.TP
+.BR -n | --nicelevel
+üÔÏÔ ÆÌÁÇ ÐÅÒÅÄ ÚÁÐÕÓËÏÍ ÉÚÍÅÎÑÅÔ ÐÒÉÏÒÉÔÅÔ ÐÒÏÃÅÓÓÁ.
+.TP
+.BR -m | --make-pidfile
+üÔÏÔ ÆÌÁÇ ÉÓÐÏÌØÚÕÅÔÓÑ, ÅÓÌÉ ÚÁÐÕÓËÁÅÍÁÑ ÐÒÏÇÒÁÍÍÁ ÎÅ ÓÏÚÄÁ£Ô Ó×ÏÊ
+ÓÏÂÓÔ×ÅÎÎÙÊ pid-ÆÁÊÌ. ðÒÉ ÜÔÏÍ
+.B start-stop-daemon
+ÎÅÐÏÓÒÅÄÓÔ×ÅÎÎÏ ÐÅÒÅÄ ÚÁÐÕÓËÏÍ ÐÒÏÃÅÓÓÁ ÓÏÚÄÁÓÔ ÆÁÊÌ, ÕËÁÚÁÎÎÙÊ ×
+ÐÁÒÁÍÅÔÒÅ ÆÌÁÇÁ
+.B --pidfile
+É ÐÏÍÅÓÔÉÔ × ÎÅÇÏ pid ÚÁÐÕÓËÁÅÍÏÇÏ ÐÒÏÃÅÓÓÁ. úÁÍÅÔØÔÅ, ÞÔÏ ÜÔÏÔ ÆÁÊÌ
+ÎÅ ÂÕÄÅÔ ÕÄẠ́ΠÐÒÉ ÏÓÔÁÎÏ×ËÅ ÐÒÏÇÒÁÍÍÙ.
+.B úáíåþáîéå:
+üÔÁ ×ÏÚÍÏÖÎÏÓÔØ ÉÎÏÇÄÁ ÍÏÖÅÔ ÎÅ ÒÁÂÏÔÁÔØ: × ÏÓÎÏ×ÎÏÍ ÜÔÏ ÓÌÕÞÁÅÔÓÑ,
+ËÏÇÄÁ ÚÁÐÕÓËÁÅÍÁÑ ÐÒÏÇÒÁÍÍÁ ×ÙÐÏÌÎÑÅÔ fork(). ðÏÜÔÏÍÕ ÄÁÎÎÙÊ ÆÌÁÇ
+ÏÂÙÞÎÏ ÂÙ×ÁÅÔ ÐÏÌÅÚÅÎ ÔÏÌØËÏ ÐÒÉ ÉÓÐÏÌØÚÏ×ÁÎÉÉ ×ÍÅÓÔÅ Ó ÆÌÁÇÏÍ
+.BR --background .
+.TP
+.BR -v | --verbose
+÷ÙÄÁ×ÁÔØ ÐÏÄÒÏÂÎÙÅ ÉÎÆÏÒÍÁÃÉÏÎÎÙÅ ÓÏÏÂÝÅÎÉÑ.
+.TP
+.BR -H | --help
+÷ÙÄÁÔØ ÐÏÄÓËÁÚËÕ É ÚÁ×ÅÒÛÉÔØÓÑ.
+.TP
+.BR -V | --version
+÷ÙÄÁÔØ ÉÎÆÏÒÍÁÃÉÀ Ï ×ÅÒÓÉÉ É ÚÁ×ÅÒÛÉÔØÓÑ.
+
+.SH á÷ôïòù
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>, ÏÓÎÏ×Ù×ÁÑÓØ
+ÎÁ ×ÅÒÓÉÉ, ÓÄÅÌÁÎÎÏÊ by Ian Jackson <ian@chiark.greenend.org.uk>.
+
+óÔÒÁÎÉÃÁ ÒÕËÏ×ÏÄÓÔ×Á by Klee Dienes <klee@mit.edu>, ÞÁÓÔÉÞÎÏ
+ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÎÏ by Ian Jackson.
+
+.SH ðåòå÷ïä
+ðÅÒÅ×£Ì Ó ÁÎÇÌÉÊÓËÏÇÏ ÷ÉËÔÏÒ ÷ÉÓÌÏÂÏËÏ× <victor_v@permonline.ru>.
+ïÂÎÏ×ÌÅÎÉÅ É ËÏÒÒÅËÔÕÒÁ: Alexey Mahotkin <alexm@hsys.msk.ru>.
--- /dev/null
+.\" Hey, Emacs! This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions. There is NO warranty.
+.TH RUN\-PARTS 8 "27 Jun 2012" "Debian"
+.SH NAME
+run\-parts \- run scripts or programs in a directory
+.SH SYNOPSIS
+.PP
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-lsbsysinit] [\-\-regex=RE]
+[\-\-umask=umask] [\-\-arg=argument] [\-\-exit\-on\-error] [\-\-help]
+[\-\-version] [\-\-list] [\-\-reverse] [\-\-] DIRECTORY
+.PP
+.B run\-parts
+\-V
+.SH DESCRIPTION
+.PP
+.B run\-parts
+runs all the executable files named within constraints described below, found
+in directory
+.IR directory .
+Other files and directories are silently ignored.
+
+If neither the \-\-lsbsysinit option nor the \-\-regex option is given
+then the names must consist entirely of ASCII upper- and lower-case
+letters, ASCII digits, ASCII underscores, and ASCII minus-hyphens.
+
+If the \-\-lsbsysinit option is given, then the names must not end
+in rpm backups (.rpmsave, .rpmnew, .rpmorig), and must
+belong to one or more of the following namespaces: the
+LANANA-assigned namespace (^[a\-z0\-9]+$); the LSB hierarchical and
+reserved namespaces (^_?([a\-z0\-9_.]+\-)+[a\-z0\-9]+$);
+and the Debian cron script namespace (^[a\-zA-Z0\-9_\-]+$).
+
+If the \-\-regex option is given, the names must match the custom
+extended regular expression specified as that option's argument.
+
+Files are run in the lexical sort order (according to the C/POSIX
+locale character collation rules) of their names unless the
+\-\-reverse option is given, in which case they are run in the
+opposite order.
+
+.SH OPTIONS
+.TP
+.B \-\-test
+print the names of the scripts which would be run, but don't actually run
+them.
+.TP
+.B \-\-list
+print the names of the all matching files (not limited to executables),
+but don't actually run them. This option cannot be used with --test.
+.TP
+.B \-v, \-\-verbose
+print the name of each script to stderr before running.
+.TP
+.B \-\-report
+similar to
+.BR \-\-verbose ,
+but only prints the name of scripts which produce output. The script's name is printed to whichever of stdout or stderr the script first produces output on.
+.TP
+.B \-\-reverse
+reverse the scripts' execution order.
+.TP
+.B \-\-exit\-on\-error
+exit as soon as a script returns with a non-zero exit code.
+.TP
+.B \-\-lsbsysinit
+use LSB namespaces instead of classical behavior.
+.TP
+.B \-\-new\-session
+run each script in a separate process session. If you use this option,
+killing run-parts will not kill the currently running script, it will
+run until completion.
+.TP
+.BI \-\-regex= RE
+validate filenames against custom extended regular expression
+.IR RE .
+See the EXAMPLES section for an example.
+.TP
+.BI "\-u, \-\-umask=" umask
+sets the umask to
+.I umask
+before running the scripts.
+.I umask
+should be specified in octal. By default the umask is set to 022.
+.TP
+.BI "\-a, \-\-arg=" argument
+pass
+.I argument
+to the scripts. Use
+.B --arg
+once for each argument you want passed.
+.TP
+.B "\-\-"
+specifies that this is the end of the options. Any filename after
+.B "\-\-"
+will be not be interpreted as an option even if it starts with a
+hyphen.
+.TP
+.B \-h, \-\-help
+display usage information and exit.
+.TP
+.B \-V, \-\-version
+display version and copyright and exit.
+
+.SH EXAMPLES
+.P
+Print the names of all files in /etc that start with `p' and end with `d':
+.P
+run-parts \-\-list \-\-regex \[aq]^p.*d$\[aq] /etc
+
+.SH COPYRIGHT
+.P
+Copyright (C) 1994 Ian Jackson.
+.P
+Copyright (C) 1996 Jeff Noxon.
+.P
+Copyright (C) 1996, 1997, 1998 Guy Maor
+.P
+Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Clint Adams
+
+.B run\-parts
+is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is
+.I no
+warranty.
--- /dev/null
+.TH START\-STOP\-DAEMON 8 "15th March 1997" "Debian Project" "dpkg utilities"
+.SH NAME
+start\-stop\-daemon \- start and stop system daemon programs
+.SH SYNOPSIS
+.B start\-stop\-daemon
+.BR \-S | \-\-start
+.IR options
+.RB [ \-\- ]
+.IR arguments
+.HP
+.B start\-stop\-daemon
+.BR \-K | \-\-stop
+.IR options
+.HP
+.B start\-stop\-daemon
+.BR \-H | \-\-help
+.HP
+.B start\-stop\-daemon
+.BR \-V | \-\-version
+.SH DESCRIPTION
+.B start\-stop\-daemon
+is used to control the creation and termination of system-level processes.
+Using the
+.BR \-\-exec ", " \-\-pidfile ", " \-\-user ", and " \-\-name " options,"
+.B start\-stop\-daemon
+can be configured to find existing instances of a running process.
+
+With
+.BR \-\-start ,
+.B start\-stop\-daemon
+checks for the existence of a specified process.
+If such a process exists,
+.B start\-stop\-daemon
+does nothing, and exits with error status 1 (0 if
+.BR \-\-oknodo
+is specified).
+If such a process does not exist, it starts an
+instance, using either the executable specified by
+.BR \-\-exec ,
+(or, if specified, by
+.BR \-\-startas ).
+Any arguments given after
+.BR \-\-
+on the command line are passed unmodified to the program being
+started.
+
+With
+.BR \-\-stop ,
+.B start\-stop\-daemon
+also checks for the existence of a specified process.
+If such a process exists,
+.B start\-stop\-daemon
+sends it the signal specified by
+.BR \-\-signal ,
+and exits with error status 0.
+If such a process does not exist,
+.B start\-stop\-daemon
+exits with error status 1
+(0 if
+.BR \-\-oknodo
+is specified). If
+.B \-\-retry
+is specified then
+.B start\-stop\-daemon
+will check that the process(es) have terminated.
+
+Note that unless
+.BR \-\-pidfile ,
+is specified, then
+.B start\-stop\-daemon
+behaves similarly to
+.B killall(1).
+.B start\-stop\-daemon
+will scan the process table looking for any processes which
+match the process name, uid, and/or gid (if specified). Any
+matching process will prevent
+.BR \-\-start
+from starting the daemon. All matching processes will be
+sent the KILL signal if
+.BR \-\-stop
+is specified. For daemons which have long-lived children
+which need to live through a
+.BR \-\-stop
+you must specify a pidfile.
+
+.SH OPTIONS
+
+.TP
+\fB\-x\fP|\fB\-\-exec\fP \fIexecutable\fP
+Check for processes that are instances of this executable (according to
+.B /proc/\fIpid\fB/exe\fP
+).
+.TP
+\fB\-p\fP|\fB\-\-pidfile\fP \fIpid-file\fP
+Check whether a process has created the file
+.IR pid-file .
+.TP
+\fB\-u\fP|\fB\-\-user\fP \fIusername\fP|\fIuid\fP
+Check for processes owned by the user specified by
+.I username
+or
+.IR uid .
+.TP
+\fB\-g\fP|\fB\-\-group\fP \fIgroup\fP|\fIgid\fP
+Change to \fIgroup\fP or \fIgid\fP when starting the process.
+.TP
+\fB\-n\fP|\fB\-\-name\fP \fIprocess-name\fP
+Check for processes with the name
+.I process-name
+(according to
+.BR /proc/\fIpid\fB/stat\fP ).
+.TP
+\fB\-s\fP|\fB\-\-signal\fP \fIsignal\fP
+With
+.BR \-\-stop ,
+specifies the signal to send to processes being stopped (default 15).
+.TP
+\fB\-R\fP|\fB\-\-retry\fP \fItimeout\fP|\fIschedule\fP
+With
+.BR \-\-stop ,
+specifies that
+.B start\-stop\-daemon
+is to check whether the process(es)
+do finish. It will check repeatedly whether any matching processes
+are running, until none are. If the processes do not exit it will
+then take further action as determined by the schedule.
+
+If
+.I timeout
+is specified instead of
+.I schedule
+then the schedule
+.IB signal / timeout /KILL/ timeout
+is used, where
+.I signal
+is the signal specified with
+.BR \-\-signal .
+
+.I schedule
+is a list of at least two items separated by slashes
+.RB ( / );
+each item may be
+.BI \- signal-number
+or [\fB\-\fP]\fIsignal-name\fP,
+which means to send that signal,
+or
+.IR timeout ,
+which means to wait that many seconds for processes to
+exit,
+or
+.BR forever ,
+which means to repeat the rest of the schedule forever if
+necessary.
+
+If the end of the schedule is reached and
+.BR forever
+is not specified, then
+.B start\-stop\-daemon
+exits with error status 2.
+If a schedule is specified, then any signal specified
+with
+.B \-\-signal
+is ignored.
+.TP
+\fB\-a\fP|\fB\-\-startas\fP \fIpathname\fP
+With
+.BR \-\-start ,
+start the process specified by
+.IR pathname .
+If not specified, defaults to the argument given to
+.BR \-\-exec .
+.TP
+.BR \-t | \-\-test
+Print actions that would be taken and set appropriate return value,
+but take no action.
+.TP
+.BR \-o | \-\-oknodo
+Return exit status 0 instead of 1 if no actions are (would be) taken.
+.TP
+.BR \-q | \-\-quiet
+Do not print informational messages; only display error messages.
+.TP
+\fB\-c\fP|\fB\-\-chuid\fP \fIusername\fR|\fIuid\fP
+Change to this username/uid before starting the process. You can also
+specify a group by appending a
+.BR : ,
+then the group or gid in the same way
+as you would for the `chown' command (\fIuser\fP\fB:\fP\fIgroup\fP).
+When using this option
+you must realize that the primary and supplemental groups are set as well,
+even if the
+.B \-\-group
+option is not specified. The
+.B \-\-group
+option is only for
+groups that the user isn't normally a member of (like adding per/process
+group membership for generic users like
+.BR nobody ).
+.TP
+\fB\-r\fP|\fB\-\-chroot\fP \fIroot\fP
+Chdir and chroot to
+.I root
+before starting the process. Please note that the pidfile is also written
+after the chroot.
+.TP
+.BR \-D ", " \-\-dropcap " \fIcapabilities1,capabilities2\fP"
+Drop theses capabilities separated by commas.
+.TP
+\fB\-d\fP|\fB\-\-chdir\fP \fIpath\fP
+Chdir to
+.I path
+before starting the process. This is done after the chroot if the
+\fB\-r\fP|\fB\-\-chroot\fP option is set. When not specified,
+start\-stop\-daemon will chdir to the root directory before starting
+the process.
+.TP
+.BR \-b | \-\-background
+Typically used with programs that don't detach on their own. This option
+will force
+.B start\-stop\-daemon
+to fork before starting the process, and force it into the background.
+.B WARNING: start\-stop\-daemon
+cannot check the exit status if the process fails to execute for
+.B any
+reason. This is a last resort, and is only meant for programs that either
+make no sense forking on their own, or where it's not feasible to add the
+code for it to do this itself.
+.TP
+\fB\-N\fP|\fB\-\-nicelevel\fP \fIint\fP
+This alters the prority of the process before starting it.
+.TP
+.BR \-m | \-\-make\-pidfile
+Used when starting a program that does not create its own pid file. This
+option will make
+.B start\-stop\-daemon
+create the file referenced with
+.B \-\-pidfile
+and place the pid into it just before executing the process. Note, it will
+not be removed when stopping the program.
+.B NOTE:
+This feature may not work in all cases. Most notably when the program
+being executed forks from its main process. Because of this it is usually
+only useful when combined with the
+.B \-\-background
+option.
+.TP
+.BR \-v | \-\-verbose
+Print verbose informational messages.
+.TP
+.BR \-H | \-\-help
+Print help information; then exit.
+.TP
+.BR \-V | \-\-version
+Print version information; then exit.
+
+.SH AUTHORS
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> based on
+a previous version by Ian Jackson <ian@chiark.greenend.org.uk>.
+
+Manual page by Klee Dienes <klee@mit.edu>, partially reformatted
+by Ian Jackson.
--- /dev/null
+@SET_MAKE@
+
+mandir = @mandir@/sv
+
+man_MANS = \
+ start-stop-daemon.8
+
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+.\" Translation of CVS revision 1.15
+.TH START\-STOP\-DAEMON 8 "15 mars 1997" "Debianprojektet" "dpkg-verktygen"
+.SH NAMN
+start\-stop\-daemon \- startar och stoppar bakgrundsprocesser
+.SH SYNOPS
+.B start-stop-daemon
+.BR -S | --start
+.IR flaggor
+.RB [ \-\- ]
+.IR parametrar
+.HP
+.B start-stop-daemon
+.BR -K | --stop
+.IR flaggor
+.HP
+.B start-stop-daemon
+.BR -H | --help
+.HP
+.B start-stop-daemon
+.BR -V | --version
+.SH BESKRIVNING
+.B start\-stop\-daemon
+används för att kontrollera skapande och avslutande av processer på
+systemnivå.
+Med hjälp av flaggorna
+.BR --exec ", " --pidfile ", " --user " och " --name
+kan
+.B start\-stop\-daemon
+ställas in att hitta existerande instanser av en körande process.
+
+Med
+.B --start
+letar
+.B start\-stop\-daemon
+efter om en angiven process existerar, och om så är fallet gör
+.B start\-stop\-daemon
+ingenting och avslutar med status 1 (0 om
+.B --oknodo
+anges).
+Om en sådan process inte existerar startas en instans, antingen med
+programfilen som anges med
+.BR --exec ,
+(eller, om den anges, med
+.BR --startas ).
+Eventuella parametrar som ges efter
+.BR --
+på kommandoraden skickas omodiferade till programmet som startas.
+Om
+.B --retry
+anges kommer
+.B start-stop-daemon
+kontrollera att processen har avslutats.
+
+Med
+.B --stop
+testar
+.B start\-stop\-daemon
+också om den angivna processen existerar, och om så är fallet sänder
+.B start\-stop\-daemon
+den signal som anges av
+.B --signal
+till den, och avslutar med status 0.
+Om en sådan process inte existerar avslutar
+.B start\-stop\-daemon
+med status 1 (0 om
+.BR --oknodo
+anges).
+
+.SH FLAGGOR
+
+.TP
+\fB-x\fP|\fB--exec\fP \fIprogramfil\fP
+Sök efter processer som är instanser av denna programfil (enligt
+.B /proc/\fIpid\fB/exe\fP
+).
+.TP
+\fB-p\fP|\fB--pidfile\fP \fIpidfil\fP
+Sök efter processer vars process-id anges i
+.IR pidfil .
+.TP
+\fB-u\fP|\fB--user\fP \fIanvändarnamn\fP|\fIanvändar-id\fP
+Sök efter processer som ägs av den användare som anges med
+.I användarnamn
+eller
+.IR användar-id .
+.TP
+\fB-n\fP|\fB--name\fP \fIprocessnamn\fP
+Sök efter processer med namnet
+.I processnamn
+(enligt
+.BR /proc/\fIpid\fB/stat\fP ).
+.TP
+\fB-s\fP|\fB--signal\fP \fIsignal\fP
+Tillsammans med
+.B --stop
+anger detta den signal som skall sändas till processen som stoppas (förval
+är 15).
+.TP
+\fB-R\fP|\fB--retry\fP \fItimeout\fP|\fIschema\fP
+Tillsammans med
+.B --stop
+anger detta att
+.B start-stop-daemon
+skall kontrollera att processen avslutas.
+Den testar flera gånger efter matchande processer som körs, tills ingen
+längrefinns kvar.
+Om processerna inte avslutar kommer programmet utföra ytterligare
+kommandon enligt schemat.
+
+Om
+.I timeout
+anges istället för
+.I schema
+kommer schemat
+.IB signal / timeout /KILL/ timeout
+att användas, där
+.I signal
+är den signal som anges med
+.BR --signal .
+
+.I schema
+är den lista med åtminstone två poster avdelade med snedstreck
+.RB ( / );
+varje post är antingen
+.BI - signalnummer
+eller [\fB\-\fP]\fIsignalnamn\fP,
+vilket betyder att signalen skall sändas, eller
+.IR timeout ,
+vilket anger det antal sekunder programmet skall vänta på att processen
+avslutar, eller
+.BR forever ,
+vilket betyder att resten av schemat skall repetera för evigt om så behövs.
+
+Om slutet på schemat nås och
+.BR forever
+inte anges kommer
+.B start-stop-daemon
+avslutas med felkod 2.
+Om ett schema anges kommer eventuell signal angiven med
+.B --signal
+att ignoreras.
+.TP
+\fB-a\fP|\fB--startas\fP \fIsökväg\fP
+Tillsammans med
+.B --start
+anger detta att processen som anges med
+.I sökväg
+skall startas.
+Om den inte anges används parametern som gavs till
+.BR --exec .
+.TP
+.BR -t | --test
+Skriver ut vad som skulle ha utförts och sätter returvärdet, men utför
+ingenting.
+.TP
+.BR -o | --oknodo
+Returnerar felstatus 0 i stället för 1 om ingen åtgärd utförs/skulle
+utförts.
+.TP
+.BR -q | --quiet
+Skriv inte informationsmeddelanden; visa endast felmeddelanden.
+.TP
+\fB-c\fP|\fB--chuid\fP \fIanvändarnamn\fR|\fIanvändar-id\fP
+Byt till detta användarnamn/användar-id innan processen startas.
+Du kan även ange en grupp genom att lägga till ett kolontecken,
+.BR : ,
+följt av gruppnamnet eller grupp-id på samma sätt som du skull gjort till
+"chown"-kommandot
+(\fIanvändarefP\fB:\fP\fIgrupp\fP).
+När du använder detta alternativ måste du ha i åtanke att även både primär
+och tilläggs-grupp sätts, även om
+.BR --group -flaggan
+inte anges.
+.BR --group -flaggan
+är bara till för grupper som användaren normalt inte är en medlem
+i (t.ex för att lägga till gruppmedlemskap för enskilda processer för
+standardanvändare såsom "nobody").
+.TP
+\fB-r\fP|\fB--chroot\fP \fIrot\fP
+Byt katalog och rot till
+.B rot
+innan processen startas.
+Observera att även pidfilen skrivs efter chroot har utförts.
+.TP
+.BR -b | --background
+Används typiskt med program som inte kopplar loss sig av sig själva.
+Denna flagga kommer tvinga
+.B start-stop-daemon
+att förgrena sig (fork) innan processen startar, och tvinga den grenen
+att köra i bakgrunden.
+.B VARNING: start-stop-daemon
+kan inte kontrollera felstatus för processer som av
+.B någon som helst
+anledning misslyckas med att exekvera.
+Detta är en sista utväg, och är endast avsett för program som det normalt
+sett inte är någon idé att på egen hand förgrena, eller där det inte är
+möjligt att lägga till koden för detta på egen hand.
+.TP
+.BR -N | --nicelevel
+Detta ändrar prioriteten på processen innan den startas.
+.TP
+.BR -m | --make-pidfile
+Används när ett program startas som inte skapar sin egen pidfil.
+Denna flagga kommer att göra så att
+.B start-stop-daemon
+skapar filen som anges med
+.B --pidfile
+och lägga process-id i den precis innan processen startas.
+Observera att den inte kommer att tas bort när programmet stoppas.
+.B OBSERVERA:
+Denna funktion kanske inte alltid fungerar, något som huvudsakligen gäller
+när programmet som startas förgrenar sig (fork) från sin huvudprocess, och
+den är därför bara användbar i samband med flaggan
+.BR --background .
+.TP
+.BR -v | --verbose
+Skriv ut pratsamma informationsmeddelanden.
+.TP
+.BR -H | --help
+Skriv ut hjälpinformation och avsluta sedan.
+.TP
+.BR -V | --version
+Skriv ut versionsinformation och avsluta sedan.
+
+.SH FÖRFATTARE
+Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>, baserat på en
+tidigare version av Ian Jackson <ian@chiark.greenend.org.uk>.
+
+Manualsida av Klee Dienes <klee@mit.edu>, delvis omformaterad av
+Ian Jackson, översatt av Peter Karlsson <peterk@debian.org>.
+
--- /dev/null
+.TH USERNETCTL 8 "Red Hat, Inc." "RHS" \" -*- nroff -*-
+.SH NAME
+usernetctl \- allow a user to manipulate a network interface if permitted
+.SH SYNOPSIS
+.B usernetctl
+\fIinterface-name\fP up\fI|\fPdown\fI|\fPreport
+.SH DESCRIPTION
+.B usernetctl
+checks to see if users are allowed to manipulate the network interface
+specified by \fIinterface-name\fP, and then tries to bring the network
+interface up or down, if up or down was specified on the command line,
+or returns true or false status (respectively) if the report option was
+specified.
+
+.B usernetctl
+is not really meant to be called directly by users, though it currently
+works fine that way. It is used as a wrapper by the ifup and ifdown
+scripts, so that users can do exactly the same thing as root:
+.nf
+ifup \fIinterface-name\fP
+ifdown \fIinterface-name\fP
+.fi
+and \fBifup\fP and \fBifdown\fP will call usernetctl automatically to
+allow the interface status change.
+.SH OPTIONS
+.TP
+.I "\fIinterface-name"
+The name of the network interface to check; for example, "ppp0". For
+backwards compatibility, "ifcfg-ppp0" and
+"/lib/rc-scripts/ifcfg-ppp0" are also supported.
+.TP
+up\fI|\fPdown
+Attempt to bring the interface up or down.
+.TP
+report
+Report on whether users can bring the interface up or down.
+.SH NOTES
+Alternate device configurations may inherit the default configuration's
+permissions.
--- /dev/null
+.\"
+.\" Copyright 2001 Werner Fink, 2001 SuSE GmbH Nuernberg, Germany.
+.\"
+.\" This program is free software; you can redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as published by
+.\" the Free Software Foundation; either version 2 of the License, or
+.\" (at your option) any later version.
+.\"
+.TH USLEEP 1 "Jan 31, 2001" "Version 1.16" "The SuSE boot concept"
+.UC 1
+.SH NAME
+Usleep \- sleep for the specified number of microseconds
+.\"
+.SH SYNOPSIS
+.\"
+.B usleep [
+.I usec
+.B ]
+.\"
+.SH DESCRIPTION
+.B usleep
+pauses for the number of
+.I usec
+microseconds. The default is
+.B 1
+microsecond. If
+.B 0
+microseconds are specified
+.BR sched_yield (2)
+is called.
+.\"
+.SH BUGS
+The
+.B usleep
+program uses the
+.BR usleep (3)
+function and therefore shows the same weaknesses
+by any system activity.
+\."
+.SH SEE ALSO
+.BR usleep (3),
+.BR sleep (1),
+.BR sleep (3),
+.BR sched_yield (2).
+\."
+.SH COPYRIGHT
+2001 Werner Fink,
+2001 SuSE GmbH Nuernberg, Germany.
+.SH AUTHOR
+Werner Fink <werner@suse.de>
--- /dev/null
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file should contain the names of kernel modules that are
+# to be loaded at boot time, one per line with extra args treated as modprobe
+# options.
+#
+# Comments begin with a `#', and everything on the line after them are ignored.
+#
+# You can also have /etc/modules.X.Y and /etc/modules.X.Y.Z, where X.Y.Z are kernel version numbers
+# The modules files are processed in exactly that order too.
+
+#loop
+
+# modules can take params as well:
+#loop max_loop=256
--- /dev/null
+# /etc/modules.preudev: kernel modules to load before udev at boot time.
+#
+# This file should contain the names of kernel modules that are
+# to be loaded before udev starts doing its magick at boot time,
+# one per line with extra args treated as modprobe options.
+#
+# Comments begin with a `#', and everything on the line after them are ignored.
+#
+# You can also have /etc/modules.preudev.X.Y and /etc/modules.preudev.X.Y.Z,
+# where X.Y.Z are kernel version numbers
+# The modules files are processed in exactly that order too.
+
+# example set for DELL MD3000 array driver
+#sd_mod
+#sg
+#mppUpper
+#mptsas
+#mppVhba
+
+# modules can take params as well:
+#loop max_loop=256
--- /dev/null
+@SET_MAKE@
+
+
+EXTRA_DIST = @POTFILES@ @PACKAGE@.pot makepot.pl
+
+POTSRC = @POTSRC@
+
+makepot = $(top_srcdir)/po/makepot.pl
+
+CATOBJEXT = .gmo
+INSTOBJEXT = .mo
+
+SUFFIXES = .po .mo .gmo
+
+.po.mo: $(PACKAGE).pot
+ $(MSGFMT) -c --statistics -o $@ $<
+
+.po.gmo: $(PACKAGE).pot
+ file=`echo $* | awk ' { gsub(/.*\//,NIL); print $0; } '`.gmo \
+ && rm -f $$file && $(GMSGFMT) -c --statistics -o $$file $<
+
+$(PACKAGE).pot: Makefile $(POTSRC)
+ LC_ALL=C $(makepot) $(POTSRC) > $(PACKAGE).po
+ cmp $(PACKAGE).po $(PACKAGE).pot || \
+ mv $(PACKAGE).po $(PACKAGE).pot; \
+ rm -f $(PACKAGE).po
+
+update-po: Makefile
+ $(MAKE) $(PACKAGE).pot
+ PATH=`pwd`/../src:$$PATH; \
+ cd $(srcdir); \
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | awk ' { gsub(/\$(CATOBJEXT)$$/,NIL); print $0; } '`; \
+ mv $$lang.po $$lang.old.po; \
+ echo "$$lang:"; \
+ if $(MSGMERGE) $$lang.old.po $(PACKAGE).pot -o $$lang.po; then \
+ rm -f $$lang.old.po; \
+ else \
+ echo "msgmerge for $$cat failed!"; \
+ rm -f $$lang.po; \
+ mv $$lang.old.po $$lang.po; \
+ fi; \
+ done
+
+all-am: Makefile $(CATALOGS)
+
+install-data-hook: all
+ if test -r "$(MKINSTALLDIRS)"; then \
+ $(MKINSTALLDIRS) $(DESTDIR)$(datadir); \
+ else \
+ $(mkinstalldirs) $(DESTDIR)$(datadir); \
+ fi
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ case "$$cat" in \
+ *.gmo) destdir=$(gnulocaledir);; \
+ *) destdir=$(localedir);; \
+ esac; \
+ lang=`echo $$cat | awk ' { gsub(/\$(CATOBJEXT)$$/,NIL); print $0; } '`; \
+ dir=$(DESTDIR)$$destdir/$$lang/LC_MESSAGES; \
+ if test -r "$(MKINSTALLDIRS)"; then \
+ $(MKINSTALLDIRS) $$dir; \
+ else \
+ $(mkinstalldirs) $$dir; \
+ fi; \
+ if test -r $$cat; then \
+ $(INSTALL_DATA) $$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
+ echo "installing $$cat as $$dir/$(PACKAGE)$(INSTOBJEXT)"; \
+ else \
+ $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
+ echo "installing $(srcdir)/$$cat as" \
+ "$$dir/$(PACKAGE)$(INSTOBJEXT)"; \
+ fi; \
+ if test -r $$cat.m; then \
+ $(INSTALL_DATA) $$cat.m $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
+ echo "installing $$cat.m as $$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
+ else \
+ if test -r $(srcdir)/$$cat.m ; then \
+ $(INSTALL_DATA) $(srcdir)/$$cat.m \
+ $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
+ echo "installing $(srcdir)/$$cat as" \
+ "$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
+ else \
+ true; \
+ fi; \
+ fi; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall-hook:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | awk ' { gsub(/\$(CATOBJEXT)$$/,NIL); print $0; } '`; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
+ rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
+ rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
+ done
+
+clean-generic:
+ rm -f *.gmo *.mo $(PACKAGE).pot
--- /dev/null
+# German translation of rc-scripts.
+# Pawel Sakowski <saq@pld-linux.org>, 2000.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: rc-scripts 0.2.6\n"
+"POT-Creation-Date: 1999-07-30 18:45+0200\n"
+"PO-Revision-Date: 2004-12-13 22:57+0100\n"
+"Last-Translator: Pawel Sakowski <saq@pld-linux.org>\n"
+"Language-Team: German <de@li.org>\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: .././lib/functions:911
+#, fuzzy
+msgid "%s (pid %s) is running%s"
+msgstr "%s (pid %s) läuft..."
+
+#: .././rc.d/rc.shutdown:122
+msgid "Stopping LVM volume groups"
+msgstr ""
+
+# #### INTERFACE #####
+#: .././lib/tnldown:29 .././lib/ifdown:23 .././lib/ifup-ipx:13
+#: .././lib/tnlup:29 .././lib/ifup:27
+msgid "Usage: %s <device name>"
+msgstr "Verwendung: %s <Gerätname>"
+
+#: .././rc.d/init.d/network:308
+#, fuzzy
+msgid "Reloading interface %s"
+msgstr "Der %s-Dienst wird umgeladen"
+
+#: .././rc.d/rc.sysinit:133 .././rc.d/rc.sysinit:146 .././rc.d/rc.sysinit:716
+#: .././rc.d/rc.sysinit:759 .././rc.d/rc.sysinit:822 .././rc.d/rc.shutdown:82
+msgid "Unmounting file systems"
+msgstr "Die Dateisysteme werden unmountet"
+
+#: .././lib/functions:1157
+msgid "WORK"
+msgstr "LÄUFT"
+
+#: .././lib/functions:931
+msgid "%s is stopped"
+msgstr "%s ist gestoppt"
+
+#: .././rc.d/rc.shutdown:169
+#, fuzzy
+msgid "The $_rebootwhat is halted"
+msgstr "Das System ist untergangen"
+
+#: .././rc.d/rc.sysinit:717 .././rc.d/rc.sysinit:760 .././rc.d/rc.sysinit:823
+#: .././rc.d/rc.shutdown:113
+msgid "Remounting root filesystem in ro mode"
+msgstr "Das Root-Dateisystem wird mit Schreibschütz erneut gemountet"
+
+#: .././lib/ifup-ppp:111
+msgid "ifup-ppp for %s exiting"
+msgstr "ifup-ppp für $DEVICE wird beendet"
+
+#: .././rc.d/rc.sysinit:239 .././rc.d/rc.sysinit:241
+msgid "Host:"
+msgstr "Rechnername:"
+
+#: .././lib/ifup-sl:65
+msgid "dip started for %s on %s at %s"
+msgstr "dip gestartet für %s auf %s mit %s"
+
+#: .././rc.d/init.d/allowlogin:52
+msgid "Users are allowed to login right now"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:121
+#, fuzzy
+msgid "Unmounting NFS filesystems (retry)"
+msgstr "Die NFS-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/netfs:142
+#, fuzzy
+msgid "Configured CIFS mountpoints: "
+msgstr "Konfigurierte Tunnel:"
+
+#: .././rc.d/init.d/random:56
+msgid "Saving random seed"
+msgstr "Das Zufallskorn wird gespeichert"
+
+#: .././rc.d/init.d/cpusets:54
+msgid "ERROR: CGROUP/CPUSET support not enabled in kernel"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:336
+msgid "Initializing USB keyboard"
+msgstr "Die USB-Tastatur wird initialisiert"
+
+#: .././rc.d/init.d/local:27
+msgid "rc.local has been started"
+msgstr ""
+
+#: .././lib/functions:370
+msgid "%s service is not running."
+msgstr "Der %s-Dienst läuft nicht."
+
+#: .././rc.d/init.d/netfs:150
+#, fuzzy
+msgid "Configured network block devices: "
+msgstr "Konfigurierte Geräte:"
+
+#: .././rc.d/init.d/network:200
+msgid "Bringing up interface %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:402
+msgid "Remounting root filesystem in rw mode"
+msgstr "Das Root-Dateisystem wird ohne Schreibschütz erneut gemountet"
+
+#: .././rc.d/rc.shutdown:188
+#, fuzzy
+msgid "Please stand by while rebooting the $_rebootwhat"
+msgstr "Bitte warten auf den Neustart des Systems"
+
+#: .././rc.d/init.d/random:74
+msgid "%d bytes of entropy available"
+msgstr ""
+
+#: .././lib/ifup-br:86
+msgid "problems with setting bridge %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:141
+msgid "*** Filesystem was repaired but system needs to be"
+msgstr "*** Das Dateisystem wurde repariert aber man muss das System"
+
+#: .././lib/functions:921
+#, fuzzy
+msgid "%s dead but pid file (%s) exists"
+msgstr "%s tot, aber die pid-Datei existiert"
+
+#: .././rc.d/init.d/cpusets:171
+msgid "Currently empty cpusets:"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:68
+msgid "Setting up Logical Volume Management"
+msgstr ""
+
+#: .././lib/functions:1112
+#, fuzzy
+msgid "Unmounting loopback filesystems (retry):"
+msgstr "Die Dateisysteme werden unmountet"
+
+#: .././rc.d/rc.shutdown:62
+msgid "Turning off quotas for local filesystems"
+msgstr "Die Quotas für die lokalen Dateisysteme werden ausgeschaltet"
+
+#: .././lib/functions:506
+msgid "$message"
+msgstr ""
+
+#: .././rc.d/rc:92
+msgid "Entering non-interactive startup"
+msgstr "Anfang des uninteraktiven Hochfahrens"
+
+#: .././lib/ifup:234
+msgid "Enabling proxy ARP on %s"
+msgstr "Proxy ARP wird auf %s eingeschaltet"
+
+#: .././rc.d/rc.sysinit:546 .././rc.d/rc.sysinit:551
+msgid "Loading sound module"
+msgstr "Das Laut-Modul wird geladen"
+
+#: .././rc.d/init.d/random:71
+msgid "The random data source is missing"
+msgstr "Die Zufallsdatenquelle fehlt"
+
+#: .././rc.d/init.d/netfs:133
+msgid "/proc filesystem unavailable"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:47
+#, fuzzy
+msgid "Mounting NFS filesystems"
+msgstr "Die NFS-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/netfs:114
+#, fuzzy
+msgid "Unmounting network block filesystems"
+msgstr "Die Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/network:13 .././rc.d/init.d/network:42 .././lib/ifup-sl:83
+#: .././lib/ifup-irda:36 .././lib/ifdown:124 .././lib/ifdown-br:35
+#: .././lib/ifup-vlan:43 .././lib/ifup-ipx:22 .././lib/ifup:91
+#: .././lib/ifup-br:35
+msgid "%s is missing. Can't continue."
+msgstr "Es fehlt %s. Fortsetzen nicht möglich."
+
+#: .././lib/functions:994
+msgid "Loading %s kernel module(s)"
+msgstr "%s-Kernmodul(e) wird/werden geladen"
+
+#: .././rc.d/rc.sysinit:569
+#, fuzzy
+msgid "Activating ATARAID devices"
+msgstr "Die RAID-Geräte werden gestartet"
+
+#: .././rc.d/init.d/netfs:158
+msgid "Active CIFS mountpoints: "
+msgstr ""
+
+#: .././rc.d/init.d/network:344
+msgid "Configured devices:"
+msgstr "Konfigurierte Geräte:"
+
+#: .././rc.d/init.d/single:27 .././rc.d/rc.shutdown:49
+msgid "Sending all processes the KILL signal"
+msgstr "Das KILL-Signal wird an alle Prozesse geschickt"
+
+#: .././lib/ifup-vlan:56
+msgid "VLAN kernel support is missing. Can't continue."
+msgstr ""
+
+#: .././rc.d/init.d/network:204
+msgid "Bringing up bridge interface %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:418
+msgid "Starting disk encryption using the RNG"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:282 .././rc.d/rc.sysinit:871
+msgid "Setting clock"
+msgstr "Die Systemuhr wird eingestellt"
+
+#: .././rc.d/rc.sysinit:564
+msgid "Activating dm-multipath"
+msgstr ""
+
+#: .././rc.d/init.d/cpusets:105 .././rc.d/init.d/cpusets:118
+msgid "$(nls -n "
+msgstr ""
+
+#: .././lib/ifup-sl:44 .././lib/ifup-ppp:35 .././lib/ifup-ppp:67
+msgid "%s for %s exiting"
+msgstr "%s für %s wird beendet"
+
+#: .././rc.d/rc.sysinit:723
+msgid "Scanning for LVM volume groups (on RAID)"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:143
+msgid "*** REBOOTING ***"
+msgstr "*** NEUSTART ***"
+
+#: .././rc.d/rc.sysinit:142
+msgid "*** rebooted before mounting it."
+msgstr "*** neustarten bevor es gemountet werden kann."
+
+#: .././rc.d/init.d/network:234
+msgid "Shutting down bridge interface %s"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:50
+#, fuzzy
+msgid "Mounting CIFS filesystems"
+msgstr "Die CIFS-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/netfs:115
+#, fuzzy
+msgid "Unmounting network block filesystems (retry)"
+msgstr "Die SMB-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/netfs:162
+msgid "Active NCP mountpoints: "
+msgstr ""
+
+#: .././rc.d/rc.sysinit:882
+msgid "Setting %s seconds for kernel reboot after panic"
+msgstr "%s Sekunden werden für den Kern-Neustart nach der Panik eingestellt"
+
+#: .././rc.d/rc.sysinit:339
+msgid "Initializing USB mouse"
+msgstr "Die USB-Maus wird initialisiert"
+
+#: .././rc.d/init.d/cpusets:178
+#, fuzzy
+msgid "Currently active cpusets:"
+msgstr "Bereits aktive Geräte und Tunnel:"
+
+#: .././lib/ifup-irda:59
+msgid "problems with setting %s %s"
+msgstr "Probleme beim Einstellen von %s %s"
+
+#: .././rc.d/init.d/netfs:87 .././rc.d/rc.sysinit:125 .././rc.d/rc.sysinit:751
+#: .././rc.d/rc.sysinit:814
+msgid "(Repair filesystem)# "
+msgstr "(Dateisystem-Reparieren)# "
+
+#: .././rc.d/rc.sysinit:703
+msgid "*** An error occurred during the RAID startup."
+msgstr "*** Während des RAID-Startens ist ein Fehler passiert."
+
+#: .././rc.d/init.d/netfs:76
+#, fuzzy
+msgid "Checking network-attached filesystems"
+msgstr "Die verschlüsselten Dateisysteme werden nachgesehen"
+
+#: .././rc.d/init.d/cryptsetup:36
+msgid "INSECURE OWNER FOR %s"
+msgstr ""
+
+#: .././lib/functions.network:104
+#, fuzzy
+msgid "Can't find a DHCP client."
+msgstr "Kein DHCP-Klient kann gefunden werden"
+
+#: .././rc.d/init.d/allowlogin:47
+msgid "Delay login is not enabled"
+msgstr ""
+
+#: .././lib/functions:928
+#, fuzzy
+msgid "daemon %s dead but subsys (%s) locked"
+msgstr "%s tot, aber das Subsystem gesperrt"
+
+#: .././rc.d/init.d/netfs:51
+#, fuzzy
+msgid "Mounting NCP filesystems"
+msgstr "Die NCP-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/network:238
+msgid "Shutting down interface %s"
+msgstr ""
+
+#: .././rc.d/rc.shutdown:57
+msgid "Turning off swap"
+msgstr "Die Auslagerung wird ausgeschaltet"
+
+#: .././rc.d/init.d/network:351
+msgid "Currently active devices and tunnels:"
+msgstr "Bereits aktive Geräte und Tunnel:"
+
+#: .././lib/ifup:120
+msgid "Disabling IPv6 autoconfiguration"
+msgstr "IPv6-Autokonfiguration wird ausgeschaltet"
+
+#: .././rc.d/rc.sysinit:620
+msgid "Activating LVM volume groups"
+msgstr ""
+
+#: .././lib/functions:1109
+#, fuzzy
+msgid "Unmounting loopback filesystems: "
+msgstr "Die Dateisysteme werden unmountet"
+
+#: .././rc.d/rc:258 .././rc.d/rc:259
+msgid "%sResource Manager: %sRunlevel has been reached"
+msgstr "%sRessourcenmanager: %sDie Betriebsebene ist erreicht worden"
+
+#: .././lib/ifup-ppp:110
+#, fuzzy
+msgid "%s does not exist, perhaps set $CHATSCRIPT"
+msgstr "%s existiert für %s nicht"
+
+#: .././lib/functions:358
+msgid "Starting %s service"
+msgstr "Der %s-Dienst wird gestartet"
+
+#: .././rc.d/init.d/netfs:146
+#, fuzzy
+msgid "Configured NCP mountpoints: "
+msgstr "Konfigurierte Tunnel:"
+
+#: .././rc.d/rc.sysinit:619
+msgid "Scanning for LVM volume groups"
+msgstr ""
+
+#: .././lib/functions:938
+msgid "Start service %s (Y)es/(N)o/(C)ontinue? [Y] "
+msgstr "Den %s-Dienst starten? (J)a/(N)ein/(W)eiterführen [J] "
+
+#: .././lib/functions.network:175
+msgid "Setting static RARP entries"
+msgstr "Die statischen RARP-Einträge werden eingestellt"
+
+#: .././lib/ifdown-vlan:46 .././lib/ifup-vlan:77
+msgid "/sbin/vconfig or iproute2 with vlan support is missing. Can't continue."
+msgstr ""
+
+#: .././rc.d/init.d/network:230
+msgid "Removing tunnel %s"
+msgstr ""
+
+#: .././rc.d/init.d/network:346
+msgid "Configured tunnels:"
+msgstr "Konfigurierte Tunnel:"
+
+#: .././lib/functions:362
+msgid "%s service is already running."
+msgstr "Der %s-Dienst läuft bereits."
+
+#: .././rc.d/init.d/network:209
+msgid "Bringing up tunnel interface %s"
+msgstr ""
+
+#: .././lib/ifup:35
+msgid "Users cannot control this device."
+msgstr "Die Benutzer dürfen dieses Gerät nicht kontrollieren."
+
+# #### FUNCTIONS #####
+#: .././lib/functions:354
+msgid "ERROR: Networking is down. %s can't be run."
+msgstr "FEHLER: Das Netzwerkwesen läuft nicht. %s kann nicht gestartet werden."
+
+#: .././rc.d/init.d/netfs:124
+msgid "Unmounting CIFS filesystems"
+msgstr "Die CIFS-Dateisysteme werden unmountet"
+
+#: .././lib/ifup-sl:55
+msgid "%s does not exist"
+msgstr "%s existiert nicht"
+
+#: .././rc.d/rc.sysinit:325
+msgid "Mounting USB filesystem"
+msgstr "Die USB-Dateisysteme werden gemountet"
+
+#: .././rc.d/init.d/netfs:85 .././rc.d/rc.sysinit:122 .././rc.d/rc.sysinit:705
+#: .././rc.d/rc.sysinit:748 .././rc.d/rc.sysinit:811
+msgid "*** when you leave the shell."
+msgstr "*** nachdem Sie die Shell verlassen haben."
+
+#: .././rc.d/rc.sysinit:332
+msgid "Initializing USB HID interface"
+msgstr "Die USB-HID-Schnittstelle wird initialisiert"
+
+#: .././rc.d/rc.sysinit:708
+msgid "(RAID Repair)# "
+msgstr "(RAID-Reparieren)# "
+
+#: .././rc.d/rc.sysinit:233
+msgid "\t\t Press %sI%s to enter interactive startup"
+msgstr "\t\tDrücken sie %sI%s um interaktiv hochzufahren"
+
+#: .././lib/functions:906
+msgid " in cpuset %s..."
+msgstr ""
+
+#: .././rc.d/rc.sysinit:231
+msgid "\t\t\t%sPowered by %sPLD Linux Distribution%s"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:154
+msgid "Active NFS mountpoints: "
+msgstr ""
+
+#: .././lib/functions.network:279
+msgid ""
+"Warning: Default gateway already set proably via other interface. Do you "
+"need to setup GATEWAYDEV?"
+msgstr ""
+
+# Translation of words: "DONE", "WORK", "BUSY", "FAIL", "DIED"
+# must have that same count of letters !!!!!!!!!!!!!!!!!!!!!!!
+#: .././rc.d/rc:149 .././lib/functions:1156
+msgid "DONE"
+msgstr "GETAN"
+
+#: .././rc.d/rc.sysinit:786
+msgid "Checking encrypted filesystems"
+msgstr "Die verschlüsselten Dateisysteme werden nachgesehen"
+
+#: .././lib/functions:487
+msgid "username"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:507 .././rc.d/rc.sysinit:509
+msgid "Finding module dependencies"
+msgstr "Die Modul-Abhängigkeiten werden gesucht"
+
+#: .././rc.d/rc:89
+msgid "Entering interactive startup"
+msgstr "Anfang des interaktiven Hochfahrens"
+
+#: .././rc.d/rc:250
+msgid "Setting up /etc/ld.so.cache"
+msgstr "/etc/ld.so.cache wird eingestellt"
+
+#: .././rc.d/rc.shutdown:142
+msgid "Turning off RAID for %s"
+msgstr "RAID wird für %s ausgeschaltet"
+
+#: .././rc.d/init.d/netfs:84 .././rc.d/rc.sysinit:121 .././rc.d/rc.sysinit:704
+#: .././rc.d/rc.sysinit:747 .././rc.d/rc.sysinit:810
+msgid "*** Dropping you to a shell; the system will reboot"
+msgstr "*** Lasse Sie in der Shell; das System wird neustarten,"
+
+#: .././rc.d/rc.sysinit:135 .././rc.d/rc.sysinit:148 .././rc.d/rc.sysinit:718
+#: .././rc.d/rc.sysinit:761 .././rc.d/rc.sysinit:824
+msgid "Automatic reboot in progress"
+msgstr "Automatischer Neustart wird ausgeführt"
+
+#: .././rc.d/rc.sysinit:772
+msgid "Mounting local filesystems"
+msgstr "Die lokalen Dateisysteme werden gemountet"
+
+#: .././rc.d/rc.shutdown:194
+msgid "Will now restart with kexec"
+msgstr ""
+
+#: .././rc.d/rc.shutdown:171 .././rc.d/rc.shutdown:190
+msgid "On the next boot fsck will be skipped."
+msgstr "Bei dem nächsten Start wird fsck ausgelassen."
+
+#: .././rc.d/rc.sysinit:850
+msgid "Checking filesystem quotas"
+msgstr "Die Dateisystem-Quotas werden geprüft"
+
+#: .././rc.d/rc.sysinit:315
+msgid "Initializing USB controller"
+msgstr ""
+
+#: .././lib/functions:1080
+msgid "$3"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:665
+msgid "Starting up RAID device %s"
+msgstr "Das RAID-Gerät %s wird gestartet"
+
+#: .././rc.d/init.d/cryptsetup:63
+msgid "%s: no value for cipher option, skipping"
+msgstr ""
+
+#: .././lib/ifup-ppp:258
+msgid "pppd started for %s on device %s at speed %s"
+msgstr "pppd gestartet für %s auf %s mit %s"
+
+#: .././rc.d/init.d/cryptsetup:168 .././rc.d/rc.shutdown:164
+#, fuzzy
+msgid "Stopping disk encryption"
+msgstr "Der %s-Dienst wird gestoppt"
+
+#: .././rc.d/init.d/netfs:120
+msgid "Unmounting NFS filesystems"
+msgstr "Die NFS-Dateisysteme werden unmountet"
+
+#: .././lib/ifup-sl:46 .././lib/ifup-sl:86 .././lib/ifup-ppp:37
+msgid "%s does not exist or is not executable for %s"
+msgstr "%s für %s existiert nicht oder ist nicht ausführbar"
+
+#: .././rc.d/init.d/cryptsetup:77
+msgid "%s: no value for hash option, skipping"
+msgstr ""
+
+#: .././lib/functions:366
+msgid "Stopping %s service"
+msgstr "Der %s-Dienst wird gestoppt"
+
+#: .././rc.d/rc.sysinit:388
+msgid "Setting up ISA PNP devices (userspace pnp)"
+msgstr "Die ISA-PNP-Geräte werden eingestellt (userspace pnp)"
+
+#: .././rc.d/rc.sysinit:590
+msgid "Discovering EVMS volumes"
+msgstr ""
+
+#: .././rc.d/rc.shutdown:150
+msgid "Remounting remaining filesystems ro mode"
+msgstr "Die übrige Dateisysteme werden mit Schreibschütz erneut gemountet"
+
+#: .././rc.d/init.d/netfs:83 .././rc.d/rc.sysinit:120 .././rc.d/rc.sysinit:746
+#: .././rc.d/rc.sysinit:809
+msgid "*** An error occurred during the file system check."
+msgstr "*** Während des Dateisystem-Prüfens ist ein Fehler passiert."
+
+#: .././lib/functions:1082
+msgid "$4"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:829
+msgid "Remounting encrypted filesystems back in rw mode"
+msgstr ""
+"Das verschlüsselten Dateisysteme werden ohne Schreibschütz erneut gemountet"
+
+#: .././rc.d/init.d/cryptsetup:176
+msgid "dm-crypt module is not loaded"
+msgstr ""
+
+#: .././lib/functions:1117
+msgid "Detaching loopback device $dev: "
+msgstr ""
+
+#: .././lib/ifup-sl:92
+msgid "slattach started for %s on %s at %s"
+msgstr "slattach gestartet für %s auf %s mit %s"
+
+#: .././rc.d/init.d/network:229
+msgid "Shutting down tunnel interface %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:305
+msgid "Activating swap partitions"
+msgstr "Die Auslagerungspartitionen werden aktiviert"
+
+#: .././lib/ifup:99
+msgid "Enslaving %s to %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:855
+msgid "Turning on quotas for local filesystems"
+msgstr "Die Quotas für die lokalen Dateisysteme werden eingeschaltet"
+
+#: .././rc.d/init.d/cpusets:37
+msgid "ERROR: CGROUP/CPUSET mounted in a way I can't recognize"
+msgstr ""
+
+# #### RANDOM #####
+#: .././rc.d/rc.sysinit:535
+msgid "Initializing firewire controller"
+msgstr ""
+
+#: .././lib/functions:418
+msgid "$1"
+msgstr ""
+
+#: .././lib/ifup-ppp:117
+msgid "Setting up a new %s config file"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:736
+msgid "Checking filesystems"
+msgstr "Die Dateisysteme werden nachgesehen"
+
+#: .././lib/functions:378
+msgid "Usage: %s"
+msgstr "Verwendung: %s"
+
+#: .././rc.d/init.d/netfs:98
+#, fuzzy
+msgid "Mounting other filesystems"
+msgstr "Die lokalen Dateisysteme werden gemountet"
+
+#: .././rc.d/init.d/cryptsetup:164 .././rc.d/rc.sysinit:298
+#: .././rc.d/rc.sysinit:629
+#, fuzzy
+msgid "Starting disk encryption"
+msgstr "Der %s-Dienst wird gestartet"
+
+#: .././rc.d/init.d/cryptsetup:40
+msgid "Key file for %s not found, skipping"
+msgstr ""
+
+#: .././lib/ifup:86
+msgid "Delaying %s initialization"
+msgstr ""
+
+# #### RANDOM #####
+#: .././rc.d/init.d/random:33
+msgid "Initializing random number generator"
+msgstr "Der Zufallszahlgenerator wird initialisiert"
+
+#: .././rc.d/init.d/cryptsetup:174
+msgid "dm-crypt module is loaded"
+msgstr ""
+
+# #### ALLOWLOGIN #####
+#: .././rc.d/init.d/allowlogin:30
+msgid "Allowing users to login"
+msgstr "Die Benutzer werden erlaubt anzumelden"
+
+#: .././rc.d/rc.sysinit:110
+msgid "Checking root filesystem"
+msgstr "Das Root-Dateisystem wird nachgesehen"
+
+#: .././rc.d/rc.sysinit:439
+msgid "System bootup in progress - please wait"
+msgstr "Das System wird bereits gestartet - bitte warten"
+
+#: .././rc.d/rc.sysinit:644 .././rc.d/rc.sysinit:700 .././rc.d/rc.sysinit:728
+msgid "Starting up RAID devices"
+msgstr "Die RAID-Geräte werden gestartet"
+
+#: .././rc.d/init.d/cpusets:168
+#, fuzzy
+msgid "Configured cpusets:"
+msgstr "Konfigurierte Geräte:"
+
+#: .././rc.d/init.d/cpusets:105 .././rc.d/init.d/cpusets:118
+msgid "$("
+msgstr ""
+
+#: .././lib/functions:386
+msgid "$@"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:960
+msgid "Enabling swap space"
+msgstr "Der Auslagerungsbereich wird eingeschaltet"
+
+#: .././rc.d/rc.sysinit:393
+msgid "Setting up ISA PNP devices (kernelspace pnp)"
+msgstr "Die ISA-PNP-Geräte werden eingestellt (kernelspace pnp)"
+
+#: .././lib/functions:1159
+msgid "DIED"
+msgstr "STARB"
+
+#: .././lib/functions:1011
+msgid "Could not load %s kernel module(s)"
+msgstr "%s-Kernmodul(e) konnte(n) nicht geladen werden"
+
+# #### INIT #####
+#: .././rc.d/init.d/single:25 .././rc.d/rc.shutdown:43
+msgid "Sending all processes the TERM signal"
+msgstr "Das TERM-Signal wird an alle Prozesse geschickt"
+
+#: .././rc.d/init.d/single:53
+msgid "Telling INIT to go to single user mode"
+msgstr "INIT wird befehlt, in den Single-Modus zu gehen"
+
+#: .././lib/functions:1387
+msgid "$command not implemented for $name"
+msgstr ""
+
+#: .././lib/functions:374
+msgid "Reloading %s service"
+msgstr "Der %s-Dienst wird umgeladen"
+
+#: .././rc.d/init.d/netfs:125
+msgid "Unmounting NCP filesystems"
+msgstr "Die NCP-Dateisysteme werden unmountet"
+
+#: .././rc.d/init.d/local:29
+msgid "rc.local has not been started"
+msgstr ""
+
+#: .././rc.d/init.d/allowlogin:37
+#, fuzzy
+msgid "System shutdown in progress\n"
+msgstr "System-Herunterfahren wird ausgeführt \n"
+
+#: .././rc.d/rc.sysinit:437
+msgid "Enabling Delay Login"
+msgstr "Verzögerte Anmeldung wird aktiviert"
+
+#: .././lib/functions:1155
+msgid "BUSY"
+msgstr "WIRKE"
+
+#: .././lib/ifdown-irda:69
+msgid "ifdown-%s unable to kill %s for %s"
+msgstr "ifdown-%s kann %s nicht für %s töten"
+
+#: .././rc.d/init.d/cryptsetup:98
+msgid "$src: No such device"
+msgstr ""
+
+#: .././rc.d/init.d/cryptsetup:105
+msgid "%s: LUKS requires non-random key, skipping"
+msgstr ""
+
+#: .././lib/ifup-sl:58 .././lib/ifup-ppp:113
+msgid "%s does not exist for %s"
+msgstr "%s existiert für %s nicht"
+
+#: .././rc.d/rc.sysinit:283 .././rc.d/rc.sysinit:872
+msgid "Today`s date:"
+msgstr "Das heutige Datum:"
+
+#: .././rc.d/init.d/network:208
+msgid "Setting tunnel %s"
+msgstr ""
+
+#: .././rc.d/init.d/allowlogin:45
+msgid "Delay login is enabled"
+msgstr ""
+
+#: .././rc.d/init.d/network:349
+msgid "Currently inactive devices and tunnels:"
+msgstr "Bereits inaktive Geräte und Tunnel:"
+
+#: .././lib/ifup-sl:43 .././lib/ifup-ppp:34 .././lib/ifup-ppp:66
+msgid "%s does not exist or is not executable"
+msgstr "%s existiert nicht oder ist nicht ausführbar"
+
+#: .././rc.d/rc:147 .././rc.d/rc:148
+msgid "%sResource Manager: %sEntering runlevel number"
+msgstr "%sRessourcenmanager: %sWechsel in die Betriebsebene Nummer"
+
+#: .././rc.d/init.d/cryptsetup:110
+msgid "%s: options are invalid for LUKS partitions, ignoring them"
+msgstr ""
+
+#: .././lib/functions:570
+msgid "warning: --check option is ignored!"
+msgstr "Warnung: die Option --check wird ignoriert!"
+
+#: .././lib/functions:908
+msgid " outside of configured cpuset %s..."
+msgstr ""
+
+#: .././rc.d/init.d/netfs:166
+msgid "Active network block devices: "
+msgstr ""
+
+#: .././lib/functions:1158
+msgid "FAIL"
+msgstr "UNGUT"
+
+#: .././lib/functions.network:137 .././lib/functions.network:139
+msgid "Setting static ARP entries"
+msgstr "Die statischen ARP-Einträge werden eingestellt"
+
+#: .././rc.d/init.d/allowlogin:50
+msgid "Users are not allowed to login right now"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:246
+msgid "NIS Domain:"
+msgstr "NIS-Domäne:"
+
+#: .././rc.d/init.d/cryptsetup:32
+msgid "INSECURE MODE FOR %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:724
+msgid "Activating LVM volume groups (on RAID)"
+msgstr ""
+
+#: .././lib/ifup:180
+msgid "%s: Check cable/radio on-off switch?"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:138
+#, fuzzy
+msgid "Configured NFS mountpoints: "
+msgstr "Konfigurierte Tunnel:"
+
+#: .././lib/ifup-sl:56 .././lib/ifup-sl:84
+msgid "ifup-sl - %s exiting"
+msgstr "ifup-sl - %s wird beendet"
+
+#: .././rc.d/init.d/network:51
+msgid "Setting interfaces names (nameif)"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:407
+msgid "Checking root filesystem quotas"
+msgstr "Die Root-Dateisystem-Quotas werden nachgesehen"
+
+#: .././lib/ifup:179 .././lib/ifup:184
+msgid "Determining IP information for %s (%s)"
+msgstr ""
+
+#: .././rc.d/init.d/cryptsetup:70
+msgid "%s: no value for size option, skipping"
+msgstr ""
+
+#, fuzzy
+#~ msgid "Checking %s configuration"
+#~ msgstr "IPv6-Autokonfiguration wird ausgeschaltet"
+
+#~ msgid "Setting time zone information (%s, %s)"
+#~ msgstr "Information über die Zeitzone (%s, %s) wird eingestellt"
+
+#~ msgid "Starting Device Filesystem Daemon"
+#~ msgstr "Der Device-Dateisystem-Server wird gestartet"
+
+#~ msgid "Starting udev"
+#~ msgstr "udev wird gestartet"
+
+# #### TIMEZONE #####
+#~ msgid "Setting time zone information (%s)"
+#~ msgstr "Information über die Zeitzone (%s) wird eingestellt"
+
+#~ msgid "Usage: %s {start|stop|restart|reload|force-reload|status}"
+#~ msgstr "Verwendung: %s {start|stop|restart|reload|force-reload|status}"
+
+#~ msgid "The random data source exists"
+#~ msgstr "Die Zufallsdatenquelle existiert"
+
+#~ msgid "Reload %s service"
+#~ msgstr "Der %s-Dienst wird umgeladen"
+
+#~ msgid "Turning off RAID devices"
+#~ msgstr "Die RAID-Geräte werden ausgeschaltet"
+
+#~ msgid "Mounting Device Filesystem"
+#~ msgstr "Das Device-Dateisystem wird gemountet"
+
+#~ msgid "Unsetting time zone information"
+#~ msgstr "Information über die Zeitzone wird gelöscht"
+
+#~ msgid "does not exist"
+#~ msgstr "existiert nicht"
+
+# #### NETWORK #####
+#~ msgid "Setting network parameters"
+#~ msgstr "Die Netzwerkparameter werden eingestellt"
+
+#~ msgid "Configuring kernel parameters"
+#~ msgstr "Die Kernparameter werden konfiguriert"
--- /dev/null
+#!/usr/bin/perl -w
+
+#
+# Extract messages from scripts and make pot
+#
+# Copyright (c) 1999 Free Software Fundation, Inc.
+# Artur Frysiak <wiget@pld-linux.org>
+# Changes:
+# 2000-08-25 Arkadiusz Miskiewicz <misiek@pld-linux.org>
+# - support for $(nls "xyz"), progress "xyz" and '' instead of "".
+#
+
+my %pot;
+
+sub potentry {
+ my( $msg, $lnr, $filename ) = @_;
+#print STDERR "msg = $msg\nlnr = $lnr\nfilename = $filename\n";
+ if (defined $pot{"$msg"}) {
+ $pot{"$msg"} = $pot{"$msg"} . "\n#: $filename:$lnr";
+#print STDERR "append $msg\n";
+ } else {
+ $pot{"$msg"} = "\n#: $filename:$lnr";
+#print STDERR "new $msg\n";
+ };
+};
+
+print STDERR "\n". $#ARGV . " files\n";
+
+if (1) {
+print <<EOF ;
+# translation of rc-scripts.
+#
+msgid \"\"
+msgstr \"\"
+\"Project-Id-Version: PACKAGE VERSION\\n\"
+\"POT-Creation-Date: 1999-07-30 18:45+0200\\n\"
+\"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\\n\"
+\"Last-Translator: FULL NAME <EMAIL\@ADDRESS>\\n\"
+\"Language-Team: LANGUAGE <LL\@li.org>\\n\"
+\"MIME-Version: 1.0\\n\"
+\"Content-Type: text/plain; charset=CHARSET\\n\"
+\"Content-Transfer-Encoding: 8bit\\n\"
+
+# Translation of words: \"DONE\", \"WORK\", \"BUSY\", \"FAIL\", \"DIED\"
+# must have that same count of letters !!!!!!!!!!!!!!!!!!!!!!!
+
+# \(4 + \"\\b\" * count of letters\) in one of five previous words
+# msgid \"\\b\\b\\b\\b\\b\\b\\b\\b\"
+EOF
+
+}
+
+
+for (my $a = 0; $a <= $#ARGV; $a++) {
+ my $lnr = 0;
+ my $filename = $ARGV[$a];
+ print STDERR " " .$filename . "\n";
+ open (POTSRC, "< " . $filename) || die "Can't open " . $filename;
+ foreach (<POTSRC>) {
+ chop;
+ if ((/(run_cmd|nls|show|progress)\s[\sa-zA-Z0-9-]*"(?!(\`|\$\()nls\s[\"\'])([^"]*)"/g) or (/(run_cmd|nls|show|progress)\s[\sa-zA-Z0-9-]*'(?!(\`|\$\()nls\s[\"\'])([^"]*)'/g)) {
+# potentry($1,$lnr,$filename) if defined $1;
+ potentry($2,$lnr,$filename) if defined $2;
+ potentry($3,$lnr,$filename) if defined $3;
+ potentry($4,$lnr,$filename) if defined $4;
+ potentry($5,$lnr,$filename) if defined $5;
+ potentry($6,$lnr,$filename) if defined $6;
+ potentry($7,$lnr,$filename) if defined $7;
+ potentry($8,$lnr,$filename) if defined $8;
+ potentry($9,$lnr,$filename) if defined $9;
+ potentry($10,$lnr,$filename) if defined $10;
+ potentry($11,$lnr,$filename) if defined $11;
+ };
+ $lnr++;
+ };
+
+ close (POTSRC);
+
+};
+
+foreach $key (keys %pot) {
+ print $pot{"$key"} . "\nmsgid \"$key\"\nmsgstr \"\"\n";
+};
--- /dev/null
+# Polish translation of rc-scripts.
+# Copyright (C) 1999, 2000 Free Software Foundation, Inc.
+# Arkadiusz Miskiewicz <misiek@pld-linux.org>, 1999, 2000.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: rc-scripts 0.3.1\n"
+"POT-Creation-Date: 1999-07-30 18:45+0200\n"
+"PO-Revision-Date: 2004-06-28 00:00+0200\n"
+"Last-Translator: rc-scripts team <pld-rc-scripts@pld-linux.org>\n"
+"Language-Team: Polish <pl@li.org>\n"
+"Language: pl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: .././lib/functions:911
+msgid "%s (pid %s) is running%s"
+msgstr "%s (pid %s) jest uruchomiony%s"
+
+#: .././rc.d/rc.shutdown:122
+msgid "Stopping LVM volume groups"
+msgstr "Zatrzymywanie grup woluminów LVM"
+
+#: .././lib/tnldown:29 .././lib/ifdown:23 .././lib/ifup-ipx:13
+#: .././lib/tnlup:29 .././lib/ifup:27
+msgid "Usage: %s <device name>"
+msgstr "Użycie: %s <nazwa urządzenia>"
+
+#: .././rc.d/init.d/network:308
+msgid "Reloading interface %s"
+msgstr "Przeładowywanie interfejsu %s"
+
+#: .././rc.d/rc.sysinit:133 .././rc.d/rc.sysinit:146 .././rc.d/rc.sysinit:716
+#: .././rc.d/rc.sysinit:759 .././rc.d/rc.sysinit:822 .././rc.d/rc.shutdown:82
+msgid "Unmounting file systems"
+msgstr "Odłączanie systemów plików"
+
+#: .././lib/functions:1157
+msgid "WORK"
+msgstr "AKTYWUJĘ"
+
+#: .././lib/functions:931
+msgid "%s is stopped"
+msgstr "%s jest zatrzymany"
+
+#: .././rc.d/rc.shutdown:169
+msgid "The $_rebootwhat is halted"
+msgstr "$_rebootwhat jest zatrzymany"
+
+#: .././rc.d/rc.sysinit:717 .././rc.d/rc.sysinit:760 .././rc.d/rc.sysinit:823
+#: .././rc.d/rc.shutdown:113
+msgid "Remounting root filesystem in ro mode"
+msgstr "Przełączanie głównego systemu plików w tryb tylko do odczytu"
+
+#: .././lib/ifup-ppp:111
+msgid "ifup-ppp for %s exiting"
+msgstr "ifup-ppp dla %s kończy"
+
+#: .././rc.d/rc.sysinit:239 .././rc.d/rc.sysinit:241
+msgid "Host:"
+msgstr "Host:"
+
+#: .././lib/ifup-sl:65
+msgid "dip started for %s on %s at %s"
+msgstr "dip wystartował dla %s na %s przy %s"
+
+#: .././rc.d/init.d/allowlogin:52
+msgid "Users are allowed to login right now"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:121
+#, fuzzy
+msgid "Unmounting NFS filesystems (retry)"
+msgstr "Odłączanie systemów plików NFS"
+
+#: .././rc.d/init.d/netfs:142
+#, fuzzy
+msgid "Configured CIFS mountpoints: "
+msgstr "Skonfigurowane tunele:"
+
+#: .././rc.d/init.d/random:56
+msgid "Saving random seed"
+msgstr "Zapisanie podstawy generatora losowego"
+
+#: .././rc.d/init.d/cpusets:54
+#, fuzzy
+msgid "ERROR: CGROUP/CPUSET support not enabled in kernel"
+msgstr ""
+"BŁĄD: Obsługa CPUSET nie włączona w jądrze albo /dev/cpuset nie jest "
+"zamontowany"
+
+#: .././rc.d/rc.sysinit:336
+msgid "Initializing USB keyboard"
+msgstr "Inicjalizacja klawiatury USB"
+
+#: .././rc.d/init.d/local:27
+msgid "rc.local has been started"
+msgstr ""
+
+#: .././lib/functions:370
+msgid "%s service is not running."
+msgstr "Usługa %s nie jest uruchomiona."
+
+#: .././rc.d/init.d/netfs:150
+#, fuzzy
+msgid "Configured network block devices: "
+msgstr "Skonfigurowane urządzenia sieciowe:"
+
+#: .././rc.d/init.d/network:200
+msgid "Bringing up interface %s"
+msgstr "Podnoszenie interfejsu %s"
+
+#: .././rc.d/rc.sysinit:402
+msgid "Remounting root filesystem in rw mode"
+msgstr "Przełączanie głównego systemu plików w tryb zapis/odczyt"
+
+#: .././rc.d/rc.shutdown:188
+msgid "Please stand by while rebooting the $_rebootwhat"
+msgstr "Proszę czekać - restart systemu $_rebootwhat"
+
+#: .././rc.d/init.d/random:74
+msgid "%d bytes of entropy available"
+msgstr ""
+
+#: .././lib/ifup-br:86
+msgid "problems with setting bridge %s"
+msgstr "wystąpiły problemy przy ustawianiu bridge'a %s"
+
+#: .././rc.d/rc.sysinit:141
+msgid "*** Filesystem was repaired but system needs to be"
+msgstr "*** System plików został naprawiony ale konieczny jest"
+
+#: .././lib/functions:921
+#, fuzzy
+msgid "%s dead but pid file (%s) exists"
+msgstr "%s zabity ale plik z numerem procesu istnieje"
+
+#: .././rc.d/init.d/cpusets:171
+msgid "Currently empty cpusets:"
+msgstr "Puste cpusety:"
+
+#: .././rc.d/init.d/netfs:68
+msgid "Setting up Logical Volume Management"
+msgstr ""
+
+#: .././lib/functions:1112
+#, fuzzy
+msgid "Unmounting loopback filesystems (retry):"
+msgstr "Odłączanie systemów plików"
+
+#: .././rc.d/rc.shutdown:62
+msgid "Turning off quotas for local filesystems"
+msgstr "Wyłączanie quot na lokalnych systemach plików"
+
+#: .././lib/functions:506
+msgid "$message"
+msgstr ""
+
+#: .././rc.d/rc:92
+msgid "Entering non-interactive startup"
+msgstr "Wchodzę w tryb nieinteraktywny"
+
+#: .././lib/ifup:234
+msgid "Enabling proxy ARP on %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:546 .././rc.d/rc.sysinit:551
+msgid "Loading sound module"
+msgstr "Ładowanie modułu obsługi dźwięku"
+
+#: .././rc.d/init.d/random:71
+msgid "The random data source is missing"
+msgstr "Brak źródła losowych danych"
+
+#: .././rc.d/init.d/netfs:133
+msgid "/proc filesystem unavailable"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:47
+#, fuzzy
+msgid "Mounting NFS filesystems"
+msgstr "Odłączanie systemów plików NFS"
+
+#: .././rc.d/init.d/netfs:114
+#, fuzzy
+msgid "Unmounting network block filesystems"
+msgstr "Odłączanie systemów plików"
+
+#: .././rc.d/init.d/network:13 .././rc.d/init.d/network:42 .././lib/ifup-sl:83
+#: .././lib/ifup-irda:36 .././lib/ifdown:124 .././lib/ifdown-br:35
+#: .././lib/ifup-vlan:43 .././lib/ifup-ipx:22 .././lib/ifup:91
+#: .././lib/ifup-br:35
+msgid "%s is missing. Can't continue."
+msgstr "%s nie jest obecny. Nie mogę kontynuować."
+
+#: .././lib/functions:994
+msgid "Loading %s kernel module(s)"
+msgstr "Ładowanie modułu(ów) %s"
+
+#: .././rc.d/rc.sysinit:569
+msgid "Activating ATARAID devices"
+msgstr "Ustawianie urządzeń ATARAID"
+
+#: .././rc.d/init.d/netfs:158
+msgid "Active CIFS mountpoints: "
+msgstr ""
+
+#: .././rc.d/init.d/network:344
+msgid "Configured devices:"
+msgstr "Skonfigurowane urządzenia sieciowe:"
+
+#: .././rc.d/init.d/single:27 .././rc.d/rc.shutdown:49
+msgid "Sending all processes the KILL signal"
+msgstr "Wysyłanie do wszystkich procesów sygnału KILL"
+
+#: .././lib/ifup-vlan:56
+msgid "VLAN kernel support is missing. Can't continue."
+msgstr "Brak wsparcia dla VLAN w jądrze. Nie można kontynuować."
+
+#: .././rc.d/init.d/network:204
+msgid "Bringing up bridge interface %s"
+msgstr "Podnoszenie interfejsu mostu %s"
+
+#: .././rc.d/rc.sysinit:418
+msgid "Starting disk encryption using the RNG"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:282 .././rc.d/rc.sysinit:871
+msgid "Setting clock"
+msgstr "Ustawianie zegara systemowego"
+
+#: .././rc.d/rc.sysinit:564
+msgid "Activating dm-multipath"
+msgstr ""
+
+#: .././rc.d/init.d/cpusets:105 .././rc.d/init.d/cpusets:118
+msgid "$(nls -n "
+msgstr ""
+
+#: .././lib/ifup-sl:44 .././lib/ifup-ppp:35 .././lib/ifup-ppp:67
+msgid "%s for %s exiting"
+msgstr "%s dla %s kończy"
+
+#: .././rc.d/rc.sysinit:723
+msgid "Scanning for LVM volume groups (on RAID)"
+msgstr "Poszukiwanie woluminów grup LVM (na RAID)"
+
+#: .././rc.d/rc.sysinit:143
+msgid "*** REBOOTING ***"
+msgstr "*** RESTARTUJĘ ***"
+
+#: .././rc.d/rc.sysinit:142
+msgid "*** rebooted before mounting it."
+msgstr "*** restart przez zamontowaniem go."
+
+#: .././rc.d/init.d/network:234
+msgid "Shutting down bridge interface %s"
+msgstr "Wyłączanie interfejsu mostu %s"
+
+#: .././rc.d/init.d/netfs:50
+#, fuzzy
+msgid "Mounting CIFS filesystems"
+msgstr "Odłączanie systemów plików CIFS"
+
+#: .././rc.d/init.d/netfs:115
+#, fuzzy
+msgid "Unmounting network block filesystems (retry)"
+msgstr "Odłączanie systemów plików SMB"
+
+#: .././rc.d/init.d/netfs:162
+msgid "Active NCP mountpoints: "
+msgstr ""
+
+#: .././rc.d/rc.sysinit:882
+msgid "Setting %s seconds for kernel reboot after panic"
+msgstr "Restart systemu po %s sekundach od zawieszenia sie jądra"
+
+#: .././rc.d/rc.sysinit:339
+msgid "Initializing USB mouse"
+msgstr "Inicjalizacja myszy USB"
+
+#: .././rc.d/init.d/cpusets:178
+msgid "Currently active cpusets:"
+msgstr "Aktualnie aktywne cpuset:"
+
+#: .././lib/ifup-irda:59
+msgid "problems with setting %s %s"
+msgstr "wystąpiły problemy przy ustawianiu %s %s"
+
+#: .././rc.d/init.d/netfs:87 .././rc.d/rc.sysinit:125 .././rc.d/rc.sysinit:751
+#: .././rc.d/rc.sysinit:814
+msgid "(Repair filesystem)# "
+msgstr "(Naprawa systemu plików)# "
+
+#: .././rc.d/rc.sysinit:703
+msgid "*** An error occurred during the RAID startup."
+msgstr ""
+"*** Podczas inicjacji urządzeń RAID wykryto błąd niemożliwy do usunięcia."
+
+#: .././rc.d/init.d/netfs:76
+#, fuzzy
+msgid "Checking network-attached filesystems"
+msgstr "Sprawdzanie zaszyfrowanych systemów plików"
+
+#: .././rc.d/init.d/cryptsetup:36
+msgid "INSECURE OWNER FOR %s"
+msgstr "NIEBEZPIECZNY WŁAŚCICIEL DLA %s"
+
+#: .././lib/functions.network:104
+msgid "Can't find a DHCP client."
+msgstr "Nie mogę znaleźć klienta DHCP."
+
+#: .././rc.d/init.d/allowlogin:47
+msgid "Delay login is not enabled"
+msgstr "Opóźnianie logowania jest nieaktywne"
+
+#: .././lib/functions:928
+#, fuzzy
+msgid "daemon %s dead but subsys (%s) locked"
+msgstr "%s zabity ale podsystem zablokowany"
+
+#: .././rc.d/init.d/netfs:51
+#, fuzzy
+msgid "Mounting NCP filesystems"
+msgstr "Odłączanie systemów plików NCP"
+
+#: .././rc.d/init.d/network:238
+msgid "Shutting down interface %s"
+msgstr "Wyłączanie interfejsu %s"
+
+#: .././rc.d/rc.shutdown:57
+msgid "Turning off swap"
+msgstr "Wyłączanie swapa"
+
+#: .././rc.d/init.d/network:351
+msgid "Currently active devices and tunnels:"
+msgstr "Aktywne urządzenia sieciowe i tunele:"
+
+#: .././lib/ifup:120
+msgid "Disabling IPv6 autoconfiguration"
+msgstr "Wyłączanie autokonfiguracji IPv6"
+
+#: .././rc.d/rc.sysinit:620
+msgid "Activating LVM volume groups"
+msgstr "Aktywacja grup woluminów LVM"
+
+#: .././lib/functions:1109
+#, fuzzy
+msgid "Unmounting loopback filesystems: "
+msgstr "Odłączanie systemów plików"
+
+#: .././rc.d/rc:258 .././rc.d/rc:259
+msgid "%sResource Manager: %sRunlevel has been reached"
+msgstr "%sZarządca zasobów: %sOsiągnięto poziom"
+
+#: .././lib/ifup-ppp:110
+msgid "%s does not exist, perhaps set $CHATSCRIPT"
+msgstr "%s nie istnieje, być może ustaw $CHATSCRIPT"
+
+#: .././lib/functions:358
+msgid "Starting %s service"
+msgstr "Uruchamianie usługi %s"
+
+#: .././rc.d/init.d/netfs:146
+#, fuzzy
+msgid "Configured NCP mountpoints: "
+msgstr "Skonfigurowane tunele:"
+
+#: .././rc.d/rc.sysinit:619
+msgid "Scanning for LVM volume groups"
+msgstr "Poszukiwanie woluminów grup LVM"
+
+#: .././lib/functions:938
+msgid "Start service %s (Y)es/(N)o/(C)ontinue? [Y] "
+msgstr "Uruchomić usługę %s (T)ak/(N)ie/(K)ontynuuj? [T] "
+
+#: .././lib/functions.network:175
+msgid "Setting static RARP entries"
+msgstr "Ustawianie statycznych wpisów RARP"
+
+#: .././lib/ifdown-vlan:46 .././lib/ifup-vlan:77
+msgid "/sbin/vconfig or iproute2 with vlan support is missing. Can't continue."
+msgstr ""
+"/sbin/vconfig lub iproute2 ze wsparciem dla vlan nie znalezione. Nie można "
+"kontynuować."
+
+#: .././rc.d/init.d/network:230
+msgid "Removing tunnel %s"
+msgstr "Usuwanie tunelu %s"
+
+#: .././rc.d/init.d/network:346
+msgid "Configured tunnels:"
+msgstr "Skonfigurowane tunele:"
+
+#: .././lib/functions:362
+msgid "%s service is already running."
+msgstr "Usługa %s jest już uruchomiona."
+
+#: .././rc.d/init.d/network:209
+msgid "Bringing up tunnel interface %s"
+msgstr "Podnoszenie tunelu %s"
+
+#: .././lib/ifup:35
+msgid "Users cannot control this device."
+msgstr "Użytkownicy nie mogą kontrolować tego urządzenia."
+
+#: .././lib/functions:354
+msgid "ERROR: Networking is down. %s can't be run."
+msgstr "BŁĄD: Sieć nie jest uruchomiona. %s nie może zostać uruchomiony."
+
+#: .././rc.d/init.d/netfs:124
+msgid "Unmounting CIFS filesystems"
+msgstr "Odłączanie systemów plików CIFS"
+
+#: .././lib/ifup-sl:55
+msgid "%s does not exist"
+msgstr "%s nie istnieje"
+
+#: .././rc.d/rc.sysinit:325
+msgid "Mounting USB filesystem"
+msgstr "Montowanie systemu plików USB"
+
+#: .././rc.d/init.d/netfs:85 .././rc.d/rc.sysinit:122 .././rc.d/rc.sysinit:705
+#: .././rc.d/rc.sysinit:748 .././rc.d/rc.sysinit:811
+msgid "*** when you leave the shell."
+msgstr "*** po opuszczeniu powłoki."
+
+#: .././rc.d/rc.sysinit:332
+msgid "Initializing USB HID interface"
+msgstr "Inicjalizacja interfejsu USB HID"
+
+#: .././rc.d/rc.sysinit:708
+msgid "(RAID Repair)# "
+msgstr "(Naprawa RAID)# "
+
+#: .././rc.d/rc.sysinit:233
+msgid "\t\t Press %sI%s to enter interactive startup"
+msgstr "\t Proszę wcisnąć %sI%s żeby wejść w tryb interaktywny"
+
+#: .././lib/functions:906
+msgid " in cpuset %s..."
+msgstr " w cpusecie %s..."
+
+#: .././rc.d/rc.sysinit:231
+msgid "\t\t\t%sPowered by %sPLD Linux Distribution%s"
+msgstr "\t\t\t%sNapędzane przez %sPLD Linux Distribution%s"
+
+#: .././rc.d/init.d/netfs:154
+msgid "Active NFS mountpoints: "
+msgstr ""
+
+#: .././lib/functions.network:279
+msgid ""
+"Warning: Default gateway already set proably via other interface. Do you "
+"need to setup GATEWAYDEV?"
+msgstr ""
+
+#: .././rc.d/rc:149 .././lib/functions:1156
+msgid "DONE"
+msgstr "ZROBIONE"
+
+#: .././rc.d/rc.sysinit:786
+msgid "Checking encrypted filesystems"
+msgstr "Sprawdzanie zaszyfrowanych systemów plików"
+
+#: .././lib/functions:487
+msgid "username"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:507 .././rc.d/rc.sysinit:509
+msgid "Finding module dependencies"
+msgstr "Wyszukiwanie powiązań pomiędzy modułami"
+
+#: .././rc.d/rc:89
+msgid "Entering interactive startup"
+msgstr "Wchodzę w tryb interaktywny"
+
+#: .././rc.d/rc:250
+msgid "Setting up /etc/ld.so.cache"
+msgstr "Ustawianie /etc/ld.so.cache"
+
+#: .././rc.d/rc.shutdown:142
+msgid "Turning off RAID for %s"
+msgstr "Wyłączanie obsługi RAID dla %s"
+
+#: .././rc.d/init.d/netfs:84 .././rc.d/rc.sysinit:121 .././rc.d/rc.sysinit:704
+#: .././rc.d/rc.sysinit:747 .././rc.d/rc.sysinit:810
+msgid "*** Dropping you to a shell; the system will reboot"
+msgstr "*** Uruchamianie powłoki; system zostanie zrestartowany"
+
+#: .././rc.d/rc.sysinit:135 .././rc.d/rc.sysinit:148 .././rc.d/rc.sysinit:718
+#: .././rc.d/rc.sysinit:761 .././rc.d/rc.sysinit:824
+msgid "Automatic reboot in progress"
+msgstr "Automatyczny restart w toku"
+
+#: .././rc.d/rc.sysinit:772
+msgid "Mounting local filesystems"
+msgstr "Podłączanie lokalnych systemów plików"
+
+#: .././rc.d/rc.shutdown:194
+msgid "Will now restart with kexec"
+msgstr ""
+
+#: .././rc.d/rc.shutdown:171 .././rc.d/rc.shutdown:190
+msgid "On the next boot fsck will be skipped."
+msgstr "Przy następnym starcie systemu program fsck będzie pominięty."
+
+#: .././rc.d/rc.sysinit:850
+msgid "Checking filesystem quotas"
+msgstr "Sprawdzanie quot w systemach plików"
+
+#: .././rc.d/rc.sysinit:315
+msgid "Initializing USB controller"
+msgstr "Inicjalizacja kontrolera USB"
+
+#: .././lib/functions:1080
+msgid "$3"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:665
+msgid "Starting up RAID device %s"
+msgstr "Włączanie urządzenia RAID %s"
+
+#: .././rc.d/init.d/cryptsetup:63
+msgid "%s: no value for cipher option, skipping"
+msgstr ""
+
+#: .././lib/ifup-ppp:258
+msgid "pppd started for %s on device %s at speed %s"
+msgstr "pppd wystartował dla %s na %s przy prędkości %s"
+
+#: .././rc.d/init.d/cryptsetup:168 .././rc.d/rc.shutdown:164
+msgid "Stopping disk encryption"
+msgstr "Zatrzymywanie szyfrowania dysków"
+
+#: .././rc.d/init.d/netfs:120
+msgid "Unmounting NFS filesystems"
+msgstr "Odłączanie systemów plików NFS"
+
+#: .././lib/ifup-sl:46 .././lib/ifup-sl:86 .././lib/ifup-ppp:37
+msgid "%s does not exist or is not executable for %s"
+msgstr "%s nie istnieje lub nie jest wykonywalny dla %s"
+
+#: .././rc.d/init.d/cryptsetup:77
+msgid "%s: no value for hash option, skipping"
+msgstr "%s: nie podano wartości dla opcji hash, pomijam"
+
+#: .././lib/functions:366
+msgid "Stopping %s service"
+msgstr "Zatrzymywanie usługi %s"
+
+#: .././rc.d/rc.sysinit:388
+msgid "Setting up ISA PNP devices (userspace pnp)"
+msgstr "Ustawianie urządzeń ISA PNP (userspace pnp)"
+
+#: .././rc.d/rc.sysinit:590
+msgid "Discovering EVMS volumes"
+msgstr "Wykrywanie woluminów EVMS"
+
+#: .././rc.d/rc.shutdown:150
+msgid "Remounting remaining filesystems ro mode"
+msgstr "Przełączanie pozostałych systemów plików w tryb tylko do odczytu"
+
+#: .././rc.d/init.d/netfs:83 .././rc.d/rc.sysinit:120 .././rc.d/rc.sysinit:746
+#: .././rc.d/rc.sysinit:809
+msgid "*** An error occurred during the file system check."
+msgstr ""
+"*** Podczas sprawdzania systemów plików wykryto błąd niemożliwy do usunięcia."
+
+#: .././lib/functions:1082
+msgid "$4"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:829
+msgid "Remounting encrypted filesystems back in rw mode"
+msgstr "Przełączanie zaszyfrowanych systemów plików w tryb zapis/odczyt"
+
+#: .././rc.d/init.d/cryptsetup:176
+msgid "dm-crypt module is not loaded"
+msgstr ""
+
+#: .././lib/functions:1117
+msgid "Detaching loopback device $dev: "
+msgstr ""
+
+#: .././lib/ifup-sl:92
+msgid "slattach started for %s on %s at %s"
+msgstr "slattach wystartował dla %s na %s przy %s"
+
+#: .././rc.d/init.d/network:229
+msgid "Shutting down tunnel interface %s"
+msgstr "Wyłączanie tunelu %s"
+
+#: .././rc.d/rc.sysinit:305
+msgid "Activating swap partitions"
+msgstr "Aktywacja partycji swap"
+
+#: .././lib/ifup:99
+msgid "Enslaving %s to %s"
+msgstr "Ustawianie %s na %s"
+
+#: .././rc.d/rc.sysinit:855
+msgid "Turning on quotas for local filesystems"
+msgstr "Włączanie quot na lokalnych systemach plików"
+
+#: .././rc.d/init.d/cpusets:37
+msgid "ERROR: CGROUP/CPUSET mounted in a way I can't recognize"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:535
+msgid "Initializing firewire controller"
+msgstr "Inicjalizacja kontrolera firewire"
+
+#: .././lib/functions:418
+msgid "$1"
+msgstr ""
+
+#: .././lib/ifup-ppp:117
+msgid "Setting up a new %s config file"
+msgstr "Ustawianie nowego pliku konfiguracyjnego %s"
+
+#: .././rc.d/rc.sysinit:736
+msgid "Checking filesystems"
+msgstr "Sprawdzanie systemów plików"
+
+#: .././lib/functions:378
+msgid "Usage: %s"
+msgstr "Użycie: %s"
+
+#: .././rc.d/init.d/netfs:98
+#, fuzzy
+msgid "Mounting other filesystems"
+msgstr "Podłączanie lokalnych systemów plików"
+
+#: .././rc.d/init.d/cryptsetup:164 .././rc.d/rc.sysinit:298
+#: .././rc.d/rc.sysinit:629
+msgid "Starting disk encryption"
+msgstr "Uruchamianie szyfrowania dysków"
+
+#: .././rc.d/init.d/cryptsetup:40
+msgid "Key file for %s not found, skipping"
+msgstr ""
+
+#: .././lib/ifup:86
+msgid "Delaying %s initialization"
+msgstr "Opóźnianie inicjalizacji %s"
+
+#: .././rc.d/init.d/random:33
+msgid "Initializing random number generator"
+msgstr "Inicjalizacja generatora liczb losowych"
+
+#: .././rc.d/init.d/cryptsetup:174
+msgid "dm-crypt module is loaded"
+msgstr ""
+
+#: .././rc.d/init.d/allowlogin:30
+msgid "Allowing users to login"
+msgstr "Zezwolenie użytkownikom na logowanie"
+
+#: .././rc.d/rc.sysinit:110
+msgid "Checking root filesystem"
+msgstr "Sprawdzanie głównego systemu plików"
+
+#: .././rc.d/rc.sysinit:439
+msgid "System bootup in progress - please wait"
+msgstr "Uruchamianie systemu w toku - proszę czekać"
+
+#: .././rc.d/rc.sysinit:644 .././rc.d/rc.sysinit:700 .././rc.d/rc.sysinit:728
+msgid "Starting up RAID devices"
+msgstr "Ustawianie urządzeń RAID"
+
+#: .././rc.d/init.d/cpusets:168
+msgid "Configured cpusets:"
+msgstr "Skonfigurowane cpusety:"
+
+#: .././rc.d/init.d/cpusets:105 .././rc.d/init.d/cpusets:118
+msgid "$("
+msgstr ""
+
+#: .././lib/functions:386
+msgid "$@"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:960
+msgid "Enabling swap space"
+msgstr "Włączanie swapa"
+
+#: .././rc.d/rc.sysinit:393
+msgid "Setting up ISA PNP devices (kernelspace pnp)"
+msgstr "Ustawianie urządzeń ISA PNP (kernelspace pnp)"
+
+#: .././lib/functions:1159
+msgid "DIED"
+msgstr " ZGINĄŁ "
+
+#: .././lib/functions:1011
+msgid "Could not load %s kernel module(s)"
+msgstr "Nie można załadować modułu(ów) %s"
+
+#: .././rc.d/init.d/single:25 .././rc.d/rc.shutdown:43
+msgid "Sending all processes the TERM signal"
+msgstr "Wysyłanie do wszystkich procesów sygnału TERM"
+
+#: .././rc.d/init.d/single:53
+msgid "Telling INIT to go to single user mode"
+msgstr "Nakazywanie procesowi INIT przejście do trybu pojedynczego użytkownika"
+
+#: .././lib/functions:1387
+msgid "$command not implemented for $name"
+msgstr ""
+
+#: .././lib/functions:374
+msgid "Reloading %s service"
+msgstr "Przeładowanie usługi %s"
+
+#: .././rc.d/init.d/netfs:125
+msgid "Unmounting NCP filesystems"
+msgstr "Odłączanie systemów plików NCP"
+
+#: .././rc.d/init.d/local:29
+msgid "rc.local has not been started"
+msgstr ""
+
+#: .././rc.d/init.d/allowlogin:37
+#, fuzzy
+msgid "System shutdown in progress\n"
+msgstr "Zamykanie systemu w toku \n"
+
+#: .././rc.d/rc.sysinit:437
+msgid "Enabling Delay Login"
+msgstr "Włączanie opóźniania logowania"
+
+#: .././lib/functions:1155
+msgid "BUSY"
+msgstr " ZAJĘTY "
+
+#: .././lib/ifdown-irda:69
+msgid "ifdown-%s unable to kill %s for %s"
+msgstr "ifdown-%s nie mógł zabić %s dla %s"
+
+#: .././rc.d/init.d/cryptsetup:98
+msgid "$src: No such device"
+msgstr ""
+
+#: .././rc.d/init.d/cryptsetup:105
+msgid "%s: LUKS requires non-random key, skipping"
+msgstr ""
+
+#: .././lib/ifup-sl:58 .././lib/ifup-ppp:113
+msgid "%s does not exist for %s"
+msgstr "%s nie istnieje dla %s"
+
+#: .././rc.d/rc.sysinit:283 .././rc.d/rc.sysinit:872
+msgid "Today`s date:"
+msgstr "Dzisiejsza data:"
+
+#: .././rc.d/init.d/network:208
+msgid "Setting tunnel %s"
+msgstr "Podnoszenie tunelu %s"
+
+#: .././rc.d/init.d/allowlogin:45
+msgid "Delay login is enabled"
+msgstr ""
+
+#: .././rc.d/init.d/network:349
+msgid "Currently inactive devices and tunnels:"
+msgstr "Nieaktywne urządzenia sieciowe i tunele:"
+
+#: .././lib/ifup-sl:43 .././lib/ifup-ppp:34 .././lib/ifup-ppp:66
+msgid "%s does not exist or is not executable"
+msgstr "%s nie istnieje lub nie jest wykonywalny"
+
+#: .././rc.d/rc:147 .././rc.d/rc:148
+msgid "%sResource Manager: %sEntering runlevel number"
+msgstr "%sZarządca zasobów: %sWejście na poziom"
+
+#: .././rc.d/init.d/cryptsetup:110
+msgid "%s: options are invalid for LUKS partitions, ignoring them"
+msgstr ""
+
+#: .././lib/functions:570
+msgid "warning: --check option is ignored!"
+msgstr "uwaga: opcja --check jest ignorowana!"
+
+#: .././lib/functions:908
+msgid " outside of configured cpuset %s..."
+msgstr " poza swoim cpusetem %s..."
+
+#: .././rc.d/init.d/netfs:166
+msgid "Active network block devices: "
+msgstr ""
+
+#: .././lib/functions:1158
+msgid "FAIL"
+msgstr "PROBLEMY"
+
+#: .././lib/functions.network:137 .././lib/functions.network:139
+msgid "Setting static ARP entries"
+msgstr "Ustawianie statycznych wpisów ARP"
+
+#: .././rc.d/init.d/allowlogin:50
+msgid "Users are not allowed to login right now"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:246
+msgid "NIS Domain:"
+msgstr "Domena NIS:"
+
+#: .././rc.d/init.d/cryptsetup:32
+msgid "INSECURE MODE FOR %s"
+msgstr ""
+
+#: .././rc.d/rc.sysinit:724
+msgid "Activating LVM volume groups (on RAID)"
+msgstr "Aktywacja grup woluminów LVM (na RAID)"
+
+#: .././lib/ifup:180
+msgid "%s: Check cable/radio on-off switch?"
+msgstr ""
+
+#: .././rc.d/init.d/netfs:138
+#, fuzzy
+msgid "Configured NFS mountpoints: "
+msgstr "Skonfigurowane tunele:"
+
+#: .././lib/ifup-sl:56 .././lib/ifup-sl:84
+msgid "ifup-sl - %s exiting"
+msgstr "ifup-sl - %s kończy"
+
+#: .././rc.d/init.d/network:51
+msgid "Setting interfaces names (nameif)"
+msgstr "Ustawianie nazw interfejsów (nameif)"
+
+#: .././rc.d/rc.sysinit:407
+msgid "Checking root filesystem quotas"
+msgstr "Sprawdzanie quot na głównym systemie plików"
+
+#: .././lib/ifup:179 .././lib/ifup:184
+msgid "Determining IP information for %s (%s)"
+msgstr "Ustalanie informacji IP dla %s (%s)"
+
+#: .././rc.d/init.d/cryptsetup:70
+msgid "%s: no value for size option, skipping"
+msgstr ""
+
+#, fuzzy
+#~ msgid "Checking %s configuration"
+#~ msgstr "Wyłączanie autokonfiguracji IPv6"
+
+#~ msgid "The random data source exists"
+#~ msgstr "Źródło losowych danych istnieje"
+
+#~ msgid "Setting time zone information (%s, %s)"
+#~ msgstr "Ustawianie informacji o strefie czasowej (%s, %s)"
+
+#~ msgid "Creating cpuset %s"
+#~ msgstr "Tworzenie cpusetu %s"
+
+#~ msgid "Setting time zone information (%s)"
+#~ msgstr "Ustawianie informacji o strefie czasowej (%s)"
+
+#~ msgid "Reload %s service"
+#~ msgstr "Przeładowanie usługi %s"
+
+#~ msgid "Setting default font"
+#~ msgstr "Ustawianie standardowego fontu"
+
+#~ msgid "Turning off RAID devices"
+#~ msgstr "Wyłączanie obsługi urządzeń RAID"
+
+#, fuzzy
+#~ msgid "Removing cpuset %s"
+#~ msgstr "Usuwanie cpusetu %s"
+
+#~ msgid "Unsetting time zone information"
+#~ msgstr "Usuwanie informacji o strefie czasowej"
+
+#~ msgid "%s (pid %s) is running..."
+#~ msgstr "%s (pid %s) jest uruchomiony..."
+
+#~ msgid "Setting network parameters"
+#~ msgstr "Ustawianie parametrów sieci"
+
+#~ msgid "Configuring kernel parameters"
+#~ msgstr "Ustawianie parametrów jądra"
--- /dev/null
+@SET_MAKE@
+
+pppdir = @pppdir@
+
+ppp_SCRIPTS = \
+ auth-up \
+ auth-down \
+ ip-up \
+ ip-down \
+ ipx-up \
+ ipx-down
+
+EXTRA_DIST = $(ppp_SCRIPTS)
+
+install-data-hook: all
+ ln -sf ip-up $(DESTDIR)$(pppdir)/ipv6-up
+ ln -sf ip-down $(DESTDIR)$(pppdir)/ipv6-down
+
+uninstall-hook:
+ rm -f $(DESTDIR)$(pppdir)/ipv6-up
+ rm -f $(DESTDIR)$(pppdir)/ipv6-down
--- /dev/null
+#!/bin/sh
+#
+#
+# This script is run by the pppd _after_ the link is brought down.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 Peer name
+# $3 User name
+# $4 The tty ttyS1
+# $5 The link speed 38400
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_PEER="$2"
+PPP_USER="$3"
+PPP_TTY="$4"
+PPP_SPEED="$5"
+export PPP_IFACE PPP_PEER PPP_USER PPP_TTY PPP_SPEED
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="$PPP_IPPARAM"
+source_config
+
+# as an additional convienince, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main Script starts here
+[ -x /etc/ppp/auth-down.local ] && /etc/ppp/auth-down.local
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+#
+# This script is run by the pppd after the link is established.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 Peer name
+# $3 User name
+# $4 The tty ttyS1
+# $5 The link speed 38400
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_PEER="$2"
+PPP_USER="$3"
+PPP_TTY="$4"
+PPP_SPEED="$5"
+export PPP_IFACE PPP_PEER PPP_USER PPP_TTY PPP_SPEED
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="$PPP_IPPARAM"
+source_config
+
+# as an additional convenience, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main script starts here.
+[ -x /etc/ppp/auth-up.local ] && /etc/ppp/auth-up.local
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# This file should not be modified
+#
+# This script is run by the pppd _after_ the link is brought down.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 The tty ttyS1
+# $3 The link speed 38400
+# $4 Local IP number 12.34.56.78
+# $5 Peer IP number 12.34.56.99
+# $6 Optional ``ipparam'' value foo
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$6"
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="/etc/sysconfig/interfaces/ifcfg-$PPP_IPPARAM"
+source_config
+
+# as an additional convienince, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main Script starts here
+[ -x /etc/ppp/ip-down.local ] && /etc/ppp/ip-down.local
+
+run-parts /etc/sysconfig/interfaces/down.d/ppp
+
+/lib/rc-scripts/ifdown-post "${CONFIG}"
+
+exit 0
--- /dev/null
+@SET_MAKE@
+
+ipdowndir= @pppdir@/ip-down.d
+
+ipdown_SCRIPTS = logger
+
+EXTRA_DIST = $(ipdown_SCRIPTS)
--- /dev/null
+#!/bin/sh
+# You can put here anything :)
+#
+echo " Disconnect time: $(date) from $PPP_REMOTE " >> /var/log/ppp.log
+echo "+---------------------------------------------------------------+" >> /var/log/ppp.log
--- /dev/null
+#!/bin/sh
+#
+# This file should not be modified
+#
+# This script is run by the pppd after the link is established.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 The tty ttyS1
+# $3 The link speed 38400
+# $4 Local IP number 12.34.56.78
+# $5 Peer IP number 12.34.56.99
+# $6 Optional ``ipparam'' value foo
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$6"
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="/etc/sysconfig/interfaces/ifcfg-$PPP_IPPARAM"
+source_config
+
+# as an additional convenience, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main Script starts here
+[ -x /etc/ppp/ip-up.local ] && /etc/ppp/ip-up.local
+
+run-parts /etc/sysconfig/interfaces/up.d/ppp
+
+/lib/rc-scripts/ifup-post "$CONFIG"
+
+exit 0
--- /dev/null
+@SET_MAKE@
+
+ipupdir= @pppdir@/ip-up.d
+
+ipup_SCRIPTS = logger
+
+EXTRA_DIST = $(ipup_SCRIPTS)
--- /dev/null
+#!/bin/sh
+# You can put here anything :)
+#
+echo "+---------------------------------------------------------------+" >> /var/log/ppp.log
+echo " Connect time: $(date) with $PPP_REMOTE " >> /var/log/ppp.log
--- /dev/null
+#!/bin/sh
+#
+# This file should not be modified
+#
+# This script is run by the pppd after the link is established.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 The tty ttyS1
+# $3 The link speed 38400
+# $4 The network number ???
+# $5 Local IPX node address ???
+# $6 Remote IPX node address ???
+# $7 Local IPX routing protocol ???
+# $8 Remote IPX routing protocol ???
+# $9 Local IPX router name ???
+# $10 Remote IPX router name ???
+# $11 Optional ``ipparam'' value foo
+# $12 PPPD pid 1276
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_NETWORK="$4"
+PPP_LOCAL="$5"
+PPP_REMOTE="$6"
+PPP_LOCAL_RPROTO="$7"
+PPP_REMOTE_RPROTO="$8"
+PPP_LOCAL_RNAME="$9"
+PPP_REMOTE_RNAME="$10"
+PPP_IPPARAM="$11"
+PPP_PID="$12"
+
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_NETWORK PPP_LOCAL PPP_REMOTE
+export PPP_LOCAL_RPROTO PPP_REMOTE_RPROTO PPP_LOCAL_RNAME PPP_REMOTE_RNAME
+export PPP_IPPARAM PPP_PID
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="$PPP_IPPARAM"
+source_config
+
+# as an additional convenience, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main Script starts here
+[ -x /etc/ppp/ipx-down.local ] && /etc/ppp/ipx-down.local
+
+run-parts /etc/sysconfig/interfaces/down.d/ipx
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# This file should not be modified
+#
+# This script is run by the pppd after the link is established.
+# It uses run-parts to run scripts in /etc/ppp/ip-up.d, so to add routes,
+# set IP address, run the mailq etc. you should create script(s) there.
+#
+# Be aware that other packages may include /etc/ppp/ip-up.d scripts (named
+# after that package), so choose local script names with that in mind.
+#
+# This script is called with the following arguments:
+# Arg Name Example
+# $1 Interface name ppp0
+# $2 The tty ttyS1
+# $3 The link speed 38400
+# $4 The network number ???
+# $5 Local IPX node address ???
+# $6 Remote IPX node address ???
+# $7 Local IPX routing protocol ???
+# $8 Remote IPX routing protocol ???
+# $9 Local IPX router name ???
+# $10 Remote IPX router name ???
+# $11 Optional ``ipparam'' value foo
+# $12 PPPD pid 1276
+
+set +e
+
+# The environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_NETWORK="$4"
+PPP_LOCAL="$5"
+PPP_REMOTE="$6"
+PPP_LOCAL_RPROTO="$7"
+PPP_REMOTE_RPROTO="$8"
+PPP_LOCAL_RNAME="$9"
+PPP_REMOTE_RNAME="$10"
+PPP_IPPARAM="$11"
+PPP_PID="$12"
+
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_NETWORK PPP_LOCAL PPP_REMOTE
+export PPP_LOCAL_RPROTO PPP_REMOTE_RPROTO PPP_LOCAL_RNAME PPP_REMOTE_RNAME
+export PPP_IPPARAM PPP_PID
+
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+CONFIG="$PPP_IPPARAM"
+source_config
+
+# as an additional convenience, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=$(basename "$PPP_TTY")
+export PPP_TTYNAME
+
+# Main Script starts here
+[ -x /etc/ppp/ipx-up.local ] && /etc/ppp/ipx-up.local
+
+run-parts /etc/sysconfig/interfaces/up.d/ipx
+
+exit 0
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = init.d
+
+rcdir = @rcdir@
+
+rc_SCRIPTS = \
+ rc \
+ rc.local \
+ rc.sysinit \
+ rc.init \
+ rc.shutdown
+
+EXTRA_DIST = $(rc_SCRIPTS)
--- /dev/null
+@SET_MAKE@
+
+initdir = @rcdir@/init.d
+
+init_SCRIPTS = \
+ allowlogin \
+ cpusets \
+ killall \
+ netfs \
+ network \
+ random \
+ single \
+ sys-chroots \
+ cryptsetup \
+ local
+
+EXTRA_DIST = $(init_SCRIPTS) $(init_DATA)
+
+install-data-hook: all
+ $(LN_S) $(initdir) $(DESTDIR)$(sysconfdir)/init.d
+ $(LN_S) /lib/rc-scripts/functions $(DESTDIR)$(initdir)/functions
+
+uninstall-hook:
+ rm -f $(DESTDIR)$(sysconfdir)/init.d
+ rm -f $(DESTDIR)$(sysconfdir)/init.d/functions
--- /dev/null
+#!/bin/sh
+#
+# allowlogin Allow users to login
+#
+# description: Allow users to login.
+#
+
+[ -f /etc/sysconfig/system ] && . /etc/sysconfig/system
+
+# exit early without loading big init.d functions
+case "$1" in
+start|restart|try-restart|reload|force-reload)
+ # Check value
+ case "$DELAY_LOGIN" in
+ yes|Yes|YES|true|True|TRUE|on|On|ON|Y|y|1)
+ ;;
+ *)
+ exit 0
+ ;;
+ esac
+esac
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+start() {
+ if ! is_no "$DELAY_LOGIN" && [ -f /etc/nologin.boot ]; then
+ run_cmd "Allowing users to login" rm -f /etc/nologin /etc/nologin.boot
+ fi
+}
+
+stop() {
+ # /etc/nologin when shutting down system
+ if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
+ nls "System shutdown in progress\n" > /etc/nologin
+ chmod 644 /etc/nologin
+ cp -fp /etc/nologin /etc/nologin.boot
+ fi
+}
+
+status() {
+ if ! is_no "$DELAY_LOGIN"; then
+ nls "Delay login is enabled"
+ else
+ nls "Delay login is not enabled"
+ fi
+ if [ -f /etc/nologin ]; then
+ nls "Users are not allowed to login right now"
+ else
+ nls "Users are allowed to login right now"
+ fi
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ status)
+ status
+ ;;
+ *)
+ msg_usage "$0 {start|stop|status}"
+ exit 3
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# cpusets Create/remove cpusets
+#
+# chkconfig: 12345 01 99
+# description: Creates/Removes all cpu sets configured to \
+# start at boot time.
+#
+# probe: true
+
+
+. /etc/sysconfig/system
+
+if [ "${CPUSETS:-no}" = "no" ]; then
+ case "$1" in
+ start|stop|restart)
+ exit 0
+ ;;
+ esac
+fi
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+CGDIR=
+CSUBSYS=
+if grep -q "/dev/cgroup" /proc/mounts ; then
+ CGDIR="/dev/cgroup"
+elif grep -q "/dev/cpuset" /proc/mounts ; then
+ CGDIR="/dev/cpuset"
+fi
+
+if [ -n "${CGDIR}" ]; then
+ if [ -e ${CGDIR}/cpuset.cpus ]; then
+ CSUBSYS="cpuset."
+ elif [ ! -e ${CGDIR}/cpus ]; then
+ nls "ERROR: CGROUP/CPUSET mounted in a way I can't recognize" >&2
+ exit 1
+ fi
+fi
+
+cpuset_mount() {
+ [ -n "${CGDIR}" ] && return
+
+ if grep -q cgroup /proc/filesystems 2>/dev/null ; then
+ mkdir -p /dev/cpuset 2>/dev/null
+ mount -t cgroup none /dev/cpuset -ocpuset
+ CSUBSYS="cpuset."
+ elif grep -q cpuset /proc/filesystems 2>/dev/null ; then
+ mkdir -p /dev/cpuset 2>/dev/null
+ mount -t cpuset none /dev/cpuset
+ CSUBSYS=""
+ else
+ nls "ERROR: CGROUP/CPUSET support not enabled in kernel" >&2
+ exit 1
+ fi
+ CGDIR="/dev/cpuset"
+}
+
+cpuset_create() {
+ local CPUS MEMS CPU_EXCLUSIVE MEM_EXCLUSIVE NOTIFY_ON_RELEASE TASKS
+
+ . /etc/sysconfig/cpusets/cpuset-$i
+
+ if mkdir "${CGDIR}/${NAME}" >/dev/null 2>&1 ; then
+ [ -n "$CPUS" ] && echo "$CPUS" >"${CGDIR}/${NAME}/${CSUBSYS}cpus"
+ [ -n "$MEMS" ] && echo "$MEMS" >"${CGDIR}/${NAME}/${CSUBSYS}mems"
+ [ -n "$CPU_EXCLUSIVE" ] && echo "$CPU_EXCLUSIVE" >"${CGDIR}/${NAME}/${CSUBSYS}cpu_exclusive"
+ [ -n "$MEM_EXCLUSIVE" ] && echo "$MEM_EXCLUSIVE" >"${CGDIR}/${NAME}/${CSUBSYS}mem_exclusive"
+ [ -n "$VIRTUALIZE" ] && echo "$VIRTUALIZE" >"${CGDIR}/${NAME}/${CSUBSYS}virtualize"
+ [ -n "$NOTIFY_ON_RELEASE" ] && echo "$NOTIFY_ON_RELEASE" >"${CGDIR}/${NAME}/${CSUBSYS}notify_on_release"
+ [ -n "$TASKS" ] && echo "$TASKS" >"${CGDIR}/${NAME}/tasks"
+ return 0
+ fi
+ return 1
+}
+
+cpuset_remove() {
+ local CPUS MEMS CPU_EXCLUSIVE MEM_EXCLUSIVE NOTIFY_ON_RELEASE TASKS
+
+ . /etc/sysconfig/cpusets/cpuset-$i
+
+ # This MUST be rmdir (not rm -rf)
+ if rmdir "${CGDIR}/${NAME}" >/dev/null 2>&1 ; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+cpuset_empty() {
+ if [ $(cat "${CGDIR}/$1/tasks" 2>/dev/null | wc -c) -eq 0 ] ; then
+ # true returns zero
+ return 0
+ else
+ # false returns one
+ return 1
+ fi
+}
+
+start() {
+ rc_splash "bootcpusets start"
+
+ for i in $cpusets_boot; do
+ show "$(nls -n "Creating cpuset %s" "$i")"
+ if cpuset_create $i ; then
+ ok
+ else
+ fail
+ fi
+ done
+
+ touch /var/lock/subsys/cpusets
+}
+
+stop() {
+ for i in $cpusets_boot; do
+ show "$(nls -n "Removing cpuset %s" "$i")"
+ busy
+ if cpuset_empty $i; then
+ if cpuset_remove $i; then
+ ok
+ else
+ fail
+ fi
+ else
+ fail
+ fi
+ done
+
+ rm -f /var/lock/subsys/cpusets >/dev/null 2>&1
+}
+
+# Get list of config files
+# ignores editor backup files and rpm blackups
+cpuset_configs() {
+ local match="$1"
+ for a in /etc/sysconfig/cpusets/$match; do
+ case "$a" in
+ *rpmorig|*rpmnew|*rpmsave|*~|*.orig)
+ continue
+ ;;
+ *)
+ echo $a
+ ;;
+ esac
+ done
+}
+
+cpuset_files="$(cpuset_configs 'cpuset-*')"
+cpusets_boot=$(
+ for i in $cpuset_files; do
+ ONBOOT=""; . "$i" 2>/dev/null
+ is_yes "$ONBOOT" && echo "${i##*/cpuset-}"
+ done
+)
+
+# See how we were called.
+case "$1" in
+ start)
+ cpuset_mount
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ status)
+ nls "Configured cpusets:"
+ echo "$cpusets_boot"
+ echo
+ nls "Currently empty cpusets:"
+ for i in $(ls /dev/cpuset 2>/dev/null); do
+ if [ -d ${CGDIR}/$i ]; then
+ cpuset_empty $i && echo $i
+ fi
+ done
+ echo
+ nls "Currently active cpusets:"
+ for i in $(ls /dev/cpuset 2>/dev/null); do
+ if [ -d ${CGDIR}/$i ]; then
+ cpuset_empty $i || echo $i
+ fi
+ done
+ echo
+ ;;
+ restart)
+ stop
+ cpuset_mount
+ start
+ ;;
+ *)
+ msg_usage "$0 {start|stop|restart|status}"
+ exit 3
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+# cryptsetup functions for rc-scripts
+# if invoked standalone, processes /etc/cryptab like on boot/shutdown
+
+key_is_random() {
+ [ "$1" = "/dev/urandom" -o "$1" = "/dev/hw_random" -o "$1" = "/dev/random" ]
+}
+
+# Because of a chicken/egg problem, init_crypto must be run twice. /var may be
+# encrypted but /var/lib/random-seed is needed to initialize swap.
+init_crypto() {
+ local have_random dst src key opt mode owner params makeswap skip arg
+ local param value rc ret mke2fs mdir
+
+ # call mknodes as the dm node could be missing if device was opened from
+ # initrd.
+ # XXX: shouldn't udev handle the nodes creation here?
+ /sbin/dmsetup mknodes
+
+ ret=0
+ have_random=$1
+ while read dst src key opt; do
+ [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
+ [ -b "/dev/mapper/$dst" ] && continue;
+ if [ "$have_random" = 0 ] && key_is_random "$key"; then
+ continue
+ fi
+ if [ -n "$key" -a "x$key" != "xnone" ]; then
+ if test -e "$key" ; then
+ mode=$(ls -l "$key" | cut -c 5-10)
+ owner=$(ls -l $key | awk '{ print $3 }')
+ if [ "$mode" != "------" ] && ! key_is_random "$key"; then
+ nls "INSECURE MODE FOR %s" "$key"
+ ret=1
+ fi
+ if [ "$owner" != root ]; then
+ nls "INSECURE OWNER FOR %s" "$key"
+ ret=1
+ fi
+ else
+ nls "Key file for %s not found, skipping" "$dst"
+ continue
+ fi
+ else
+ key=""
+ fi
+ params=""
+ makeswap=""
+ mke2fs=""
+ skip=""
+ # Parse the options field, convert to cryptsetup parameters
+ # and contruct the command line
+ while [ -n "$opt" ]; do
+ arg=${opt%%,*}
+ opt=${opt##$arg}
+ opt=${opt##,}
+ param=${arg%%=*}
+ value=${arg##$param=}
+
+ case "$param" in
+ cipher)
+ params="$params -c $value"
+ if [ -z "$value" ]; then
+ nls "%s: no value for cipher option, skipping" "$dst"
+ skip="yes"
+ fi
+ ;;
+ size)
+ params="$params -s $value"
+ if [ -z "$value" ]; then
+ nls "%s: no value for size option, skipping" "$dst"
+ skip="yes"
+ fi
+ ;;
+ hash)
+ params="$params -h $value"
+ if [ -z "$value" ]; then
+ nls "%s: no value for hash option, skipping" "$dst"
+ skip="yes"
+ fi
+ ;;
+ verify)
+ params="$params -y"
+ ;;
+ swap)
+ makeswap=yes
+ ;;
+ tmp)
+ mke2fs=yes
+ esac
+ done
+
+ if [ "$skip" = "yes" ]; then
+ ret=1
+ continue
+ fi
+
+ if [ ! -b "$src" ]; then
+ nls "$src: No such device"
+ ret=1
+ continue
+ fi
+
+ if /sbin/cryptsetup isLuks "$src" 2>/dev/null; then
+ if key_is_random "$key"; then
+ nls "%s: LUKS requires non-random key, skipping" "$dst"
+ ret=1
+ continue
+ fi
+ if [ -n "$params" ]; then
+ nls "%s: options are invalid for LUKS partitions, ignoring them" "$dst"
+ fi
+ /sbin/cryptsetup ${key:+-d $key} luksOpen "$src" "$dst" <&1
+ else
+ /sbin/cryptsetup $params ${key:+-d $key} create "$dst" "$src" <&1 2>/dev/null
+ fi
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ ret=1
+ continue
+ fi
+ if [ -b "/dev/mapper/$dst" ]; then
+ if [ "$makeswap" = "yes" ]; then
+ mkswap "/dev/mapper/$dst" 2>/dev/null >/dev/null
+ fi
+ if [ "$mke2fs" = "yes" ]; then
+ if mke2fs "/dev/mapper/$dst" 2>/dev/null >/dev/null \
+ && mdir=$(mktemp -d /tmp/mountXXXXXX); then
+ mount "/dev/mapper/$dst" "$mdir" && chmod 1777 "$mdir"
+ umount "$mdir"
+ rmdir "$mdir"
+ fi
+ fi
+ fi
+ done < /etc/crypttab
+ return $ret
+}
+
+halt_crypto() {
+ local fnval=0 dst src key
+ while read dst src key; do
+ [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
+ if [ -b "/dev/mapper/$dst" ]; then
+ if LC_ALL=C /sbin/dmsetup info "$dst" | grep -q '^Open count: *0$'; then
+ /sbin/cryptsetup remove "$dst"
+ else
+ fnval=1
+ fi
+ fi
+ done < /etc/crypttab
+ return $fnval
+}
+
+[ -f /etc/crypttab ] || return
+
+# if not invoked directly, return to caller
+case "$0" in *cryptsetup);; *) return;; esac
+
+. /etc/rc.d/init.d/functions
+
+RETVAL=0
+# See how we were called.
+case "$1" in
+ start)
+ show "Starting disk encryption"; started
+ init_crypto 1 && deltext; ok
+ ;;
+ stop)
+ show "Stopping disk encryption"; started
+ halt_crypto && deltext; ok
+ ;;
+ status)
+ # this is way overkill, but at least we have some status output...
+ if grep -qF dm_crypt /proc/modules; then
+ nls "dm-crypt module is loaded"
+ else
+ nls "dm-crypt module is not loaded"
+ fi
+ ;;
+ *)
+ msg_usage "$0 {start|stop|status}"
+ exit 3
+esac
+
+exit $RETVAL
--- /dev/null
+#!/bin/sh
+#
+# killall Script for system downing
+#
+# description: kill em all
+#
+
+# Bring down all services that are still running (there shouldn't be any, so
+# this is just a sanity check)
+
+# First set up a default search path.
+export PATH="/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin"
+
+case "$1" in
+ start*)
+ exit 0
+ ;;
+ stop*)
+ for i in /var/lock/subsys/*; do
+ # Check if the script is there.
+ [ ! -f $i ] && continue
+
+ # Get the subsystem name.
+ subsys=${i#/var/lock/subsys/}
+
+ # Bring the subsystem down.
+ if [ -x /etc/rc.d/init.d/$subsys ]; then
+ /etc/rc.d/init.d/$subsys stop
+ elif [ -x /etc/rc.d/init.d/$subsys.init ]; then
+ /etc/rc.d/init.d/$subsys.init stop
+ fi
+ done
+ ;;
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# local Invoke custom scripts at startup
+# chkconfig: 2345 99 01
+#
+# description: This script will be executed *after* all the other init \
+# scripts. You can put your own initialization stuff in here if you don't \
+# want to do the full Sys V style init stuff.
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# See how we were called.
+case "$1" in
+ start)
+ msg_starting "rc.local"
+ . /etc/rc.d/rc.local
+ ok
+ touch /var/lock/subsys/local
+ ;;
+ stop)
+ rm -f /var/lock/subsys/local >/dev/null 2>&1
+ ;;
+ status)
+ if [ -f /var/lock/subsys/local ]; then
+ nls 'rc.local has been started'
+ else
+ nls 'rc.local has not been started'
+ fi
+ ;;
+ *)
+ msg_usage "$0 {start|stop|status}"
+ exit 3
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# netfs Mount network filesystems.
+#
+# Authors: Bill Nottingham <notting@redhat.com>
+# AJ Lewis <alewis@redhat.com>
+# Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+#
+# chkconfig: 345 25 75
+# description: Mounts and unmounts all Network File System (NFS), \
+# CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
+
+[ -f /etc/sysconfig/network ] || exit 0
+. /etc/rc.d/init.d/functions
+. /etc/rc.d/init.d/cryptsetup
+. /etc/sysconfig/network
+
+if is_yes "$VSERVER" || [[ "$container" = lxc* ]]; then
+ exit 0
+fi
+
+# nfs uses own script for that
+if [ ! -f /etc/rc.d/init.d/nfsfs ]; then
+ NFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 ~ /^nfs/ && $3 != "nfsd" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
+ NFSMTAB=$(LC_ALL=C awk '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" { print $2 }' /proc/mounts)
+fi
+
+CIFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "cifs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
+NCPFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "ncpfs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
+NETDEVFSTAB=$(LC_ALL=C awk '!/^#/ && $4 ~/_netdev/ && $4 !~ /noauto/ { print $1 }' /etc/fstab)
+
+NFSMTAB=$(LC_ALL=C awk '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" { print $2 }' /proc/mounts)
+CIFSMTAB=$(LC_ALL=C awk '$3 == "cifs" { print $2 }' /proc/mounts)
+NCPMTAB=$(LC_ALL=C awk '$3 == "ncpfs" { print $2 }' /proc/mounts)
+NETDEVMTAB=$(LC_ALL=C awk '$4 ~ /_netdev/ && $2 != "/" { print $2 }' /etc/mtab)
+
+start() {
+ if [ ! -f /var/lock/subsys/network ]; then
+ return
+ fi
+ if [ "$(id -u)" != "0" ]; then
+ RETVAL=4
+ return
+ fi
+
+ [ -n "$NFSFSTAB" ] && {
+ [ ! -f /var/lock/subsys/rpcbind ] && service rpcbind start
+ run_cmd "Mounting NFS filesystems" mount -a -t nfs,nfs4
+ }
+
+ [ -n "$CIFSFSTAB" ] && run_cmd "Mounting CIFS filesystems" mount -a -t cifs
+ [ -n "$NCPFSTAB" ] && run_cmd "Mounting NCP filesystems" mount -a -t ncpfs
+
+ [ -n "$NETDEVFSTAB" ] && {
+ if [ -f /etc/mdadm.conf ]; then
+ mdadm -A -s
+ fi
+
+ if [ -f /etc/multipath.conf ] && [ -x /sbin/multipath ]; then
+ modprobe dm-multipath >/dev/null 2>&1
+ /sbin/multipath -v 0
+ if [ -x /sbin/kpartx ]; then
+ /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
+ fi
+ fi
+
+ if [ -x /sbin/lvm ]; then
+ if /sbin/lvm vgscan > /dev/null 2>&1 ; then
+ run_cmd "Setting up Logical Volume Management" /sbin/lvm vgchange -a y
+ fi
+ fi
+
+ if [ -f /etc/crypttab ]; then
+ init_crypto 1
+ fi
+
+ show "Checking network-attached filesystems"; started
+ initlog -c "fsck -A -T -R -a -t opts=_netdev"
+ rc=$?
+
+ if [ "$rc" -gt 1 ]; then
+ echo
+ echo
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ [ "$SELINUX" = "1" ] && disable_selinux
+ if ! is_no "$RUN_SULOGIN_ON_ERR"; then
+ /sbin/sulogin
+ else
+ /bin/sh
+ fi
+ shutdown -r now
+ fi
+ }
+
+ run_cmd "Mounting other filesystems" mount -a -t nonfs,nfs4,cifs,ncpfs,gfs,devpts
+
+ touch /var/lock/subsys/netfs
+}
+
+stop() {
+ # Unmount loopback stuff first
+ if [ "$(id -u)" != "0" ]; then
+ RETVAL=4
+ return
+ fi
+
+ __umount_loopback_loop
+ if [ -n "$NETDEVMTAB" ]; then
+ __umount_loop '$4 ~ /_netdev/ && $2 != "/" {print $2}' \
+ /etc/mtab \
+ "$(nls "Unmounting network block filesystems")" \
+ "$(nls "Unmounting network block filesystems (retry)")"
+ fi
+ if [ -n "$NFSMTAB" ]; then
+ __umount_loop '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" {print $2}' \
+ /proc/mounts \
+ "$(nls "Unmounting NFS filesystems")" \
+ "$(nls "Unmounting NFS filesystems (retry)")" \
+ "-f -l"
+ fi
+ [ -n "$CIFSMTAB" ] && run_cmd "Unmounting CIFS filesystems" umount -a -t cifs
+ [ -n "$NCPMTAB" ] && run_cmd "Unmounting NCP filesystems" umount -a -t ncp,ncpfs
+ rm -f /var/lock/subsys/netfs
+}
+
+status() {
+ [ -r /var/lock/subsys/netfs ] || RETVAL=3
+
+ if [ ! -f /proc/mounts ]; then
+ nls "/proc filesystem unavailable"
+ return
+ fi
+
+ [ -n "$NFSFSTAB" ] && {
+ nls "Configured NFS mountpoints: "
+ for fs in $NFSFSTAB; do echo $fs; done
+ }
+ [ -n "$CIFSFSTAB" ] && {
+ nls "Configured CIFS mountpoints: "
+ for fs in $CIFSFSTAB; do echo $fs; done
+ }
+ [ -n "$NCPFSTAB" ] && {
+ nls "Configured NCP mountpoints: "
+ for fs in $NCPFSTAB; do echo $fs; done
+ }
+ [ -n "$NETDEVFSTAB" ] && {
+ nls "Configured network block devices: "
+ for fs in $NETDEVFSTAB; do echo $fs; done
+ }
+ [ -n "$NFSMTAB" ] && {
+ nls "Active NFS mountpoints: "
+ for fs in $NFSMTAB; do echo $fs; done
+ }
+ [ -n "$CIFSMTAB" ] && {
+ nls "Active CIFS mountpoints: "
+ for fs in $CIFSMTAB; do echo $fs; done
+ }
+ [ -n "$NCPMTAB" ] && {
+ nls "Active NCP mountpoints: "
+ for fs in $NCPMTAB; do echo $fs; done
+ }
+ [ -n "$NETDEVMTAB" ] && {
+ nls "Active network block devices: "
+ for fs in $NETDEVMTAB; do echo $fs; done
+ }
+}
+
+RETVAL=0
+# See how we were called.
+case "$1" in
+ start)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+ start
+ ;;
+ stop)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+ stop
+ ;;
+ restart)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+ stop
+ start
+ ;;
+ reload)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+ start
+ ;;
+ status)
+ status
+ ;;
+ *)
+ msg_usage "$0 {start|stop|restart|reload|status}"
+ exit 3
+esac
+
+exit $RETVAL
--- /dev/null
+#!/bin/sh
+#
+# network Bring up/down networking
+#
+# chkconfig: 2345 10 90
+# description: Activates/Deactivates all network interfaces configured to \
+# start at boot time.
+#
+# probe: true
+
+if [ ! -f /etc/sysconfig/network ]; then
+ . /etc/rc.d/init.d/functions
+ nls "%s is missing. Can't continue." "/etc/sysconfig/network"
+ exit 1
+fi
+
+. /etc/sysconfig/network
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions.network
+
+# Will be removed in the future
+if [ -n "$NETWORKING" ] && is_yes "$NETWORKING"; then
+ if [ -z "$IPV4_NETWORKING" ]; then
+ echo "NETWORKING is set to YES, but IPV4_NETWORKING is empty!"
+ echo "Please upgrade your config"
+ echo "Assuming you want IPv4 networking"
+ IPV4_NETWORKING=yes
+ fi
+fi
+
+######
+# initialize networking:
+# - check IPv4, IPv6, IPX can be handled by system
+# - setup default IPv{4,6} interfaces policy like:
+# - spoofig protection,
+# - icmp echo ignore broadcasts,
+# - setup lo interface
+network_init() {
+ if [ ! -x /sbin/ip ]; then
+ nls "%s is missing. Can't continue." "/sbin/ip"
+ exit 1
+ fi
+
+ # Modprobe needed devices
+ modprobe_net
+
+ # load sysctl params
+ apply_sysctl
+
+ # Setup interfaces names
+ if ! is_empty_file /etc/mactab && [ -x /sbin/nameif ]; then
+ run_cmd "Setting interfaces names (nameif)" /sbin/nameif
+ fi
+
+ # Kernel network parameters
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
+
+ # Set UP loopback interface
+ set_up_loopback
+
+ # Setup configuration
+ setup_nat on
+ setup_routes on
+ setup_ip_rules on
+ # Setup IPX
+ if is_yes "$IPX"; then
+ if [ -n $IPXAUTOPRIMARY ] ; then
+ if is_yes "$IPXAUTOPRIMARY"; then
+ IPXAUTOPRIMARY="on"
+ else
+ IPXAUTOPRIMARY="off"
+ fi
+ /sbin/ipx_configure --auto_primary=$IPXAUTOPRIMARY
+ fi
+ if [ -n $IPXAUTOFRAME ] ; then
+ if is_yes "$IPXAUTOFRAME"; then
+ IPXAUTOFRAME="on"
+ else
+ IPXAUTOFRAME="off"
+ fi
+ /sbin/ipx_configure --auto_interface=$IPXAUTOFRAME
+ fi
+ if [ -n "$IPXINTERNALNETNUM" -a "$IPXINTERNALNETNUM" != "0" ]; then
+ /sbin/ipx_internal_net add $IPXINTERNALNETNUM $IPXINTERNALNODENUM
+ fi
+ fi
+}
+
+network_postinit() {
+ # Run this again to catch any interface-specific actions
+ apply_sysctl
+
+ # Set static RARP table
+ static_rarp
+
+ # Set static ARP table
+ static_arp
+}
+
+######
+# deinitialize networking
+# - down lo interface.
+network_deinit() {
+ setup_routes off
+ setup_ip_rules off
+
+ # Set down NAT rules
+ setup_nat off
+ # Set DOWN loopback interface
+ set_down_loopback
+}
+
+# Get list of interface configs
+# ignores editor backup files and rpm backups
+network_interface_configs() {
+ local match="$1"
+ for a in /etc/sysconfig/interfaces/$match; do
+ case "$a" in
+ *.rpmorig|*.rpmnew|*.rpmsave|*~|*.orig)
+ continue
+ ;;
+ *)
+ echo $a
+ ;;
+ esac
+ done
+}
+
+find_boot_interfaces() {
+ ifcfg_files="$(network_interface_configs 'ifcfg-*')"
+ bootprio=$(grep '^BOOTPRIO=' $ifcfg_files)
+
+ if [ -n "$bootprio" ]; then
+ # find all the interfaces besides loopback.
+ interfaces_boot=`
+ for a in $(echo "$bootprio" | sort -t= -s -n -k2,2); do
+ i="${a%:BOOTPRIO*}"
+ case $i in
+ *ifcfg-lo) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+ else
+ interfaces_boot=`
+ for i in $ifcfg_files; do
+ case ${i##*/} in
+ ifcfg-lo|ifcfg-sit*|ifcfg-atm*|ifcfg-lec*|ifcfg-nas*|ifcfg-br*|ifcfg-macvlan*|ifcfg-macvtap*|ifcfg-*.*) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+
+ interfaces_vlan_boot=`
+ for i in $ifcfg_files; do
+ case ${i##*/} in
+ ifcfg-*.*) ;;
+ *) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+
+ interfaces_br_boot=`
+ for i in $ifcfg_files; do
+ case ${i##*/} in
+ ifcfg-br*) ;;
+ *) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+
+ interfaces_virt_boot=`
+ for i in $ifcfg_files; do
+ case ${i##*/} in
+ ifcfg-macvtap*|ifcfg-macvlan*) ;;
+ *) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+
+ interfaces_sit_boot=`
+ for i in $ifcfg_files; do
+ case ${i##*/} in
+ ifcfg-sit*) ;;
+ *) continue ;;
+ esac
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/ifcfg-}"
+ done
+ `
+ fi
+
+ tunnels=$(
+ for i in $(network_interface_configs 'tnlcfg-*'); do
+ DEVICE=""; ONBOOT=""; USERS=""; . "$i" 2>/dev/null
+ [ "${DEVICE:+set}" != "set" ] && continue
+ [ ${USERS:-no} != no ] && continue
+ [ ${ONBOOT:-no} = yes ] && echo "${i##*/tnlcfg-}"
+ done
+ )
+}
+
+start() {
+ rc_splash "bootnetwork start"
+ network_init
+
+ for i in $interfaces_boot $interfaces_vlan_boot $interfaces_sit_boot; do
+ run_cmd -a "$(nls 'Bringing up interface %s' "$i")" /sbin/ifup $i boot
+ done
+
+ for i in $interfaces_br_boot ; do
+ run_cmd -a "$(nls 'Bringing up bridge interface %s' "$i")" /sbin/ifup $i boot
+ done
+
+ for i in $interfaces_virt_boot ; do
+ run_cmd -a "$(nls 'Bringing up virtual interface %s' "$i")" /sbin/ifup $i boot
+ done
+
+ for i in $tunnels; do
+ run_cmd -a "$(nls 'Setting tunnel %s' "$i")" /sbin/tnlup $i boot
+ run_cmd -a "$(nls 'Bringing up tunnel interface %s' "$i")" /sbin/ifup tnlcfg-$i boot
+ done
+
+ network_postinit
+
+ touch /var/lock/subsys/network
+}
+
+stop() {
+ # If we go to runlevel 0, 1 or 6 then umount all network fs
+ if [ "$RUNLEVEL" = "6" -o "$RUNLEVEL" = "0" -o "$RUNLEVEL" = "1" ]; then
+ if [ -x /etc/rc.d/init.d/netfs -a -f /var/lock/subsys/netfs ];
+ then
+ /etc/rc.d/init.d/netfs stop
+ fi
+ fi
+
+ for i in $tunnels; do
+ run_cmd -a "$(nls 'Shutting down tunnel interface %s' "$i")" /sbin/ifdown tnlcfg-$i boot
+ run_cmd -a "$(nls 'Removing tunnel %s' "$i")" /sbin/tnldown $i boot
+ done
+
+ for i in $interfaces_virt_boot ; do
+ run_cmd -a "$(nls 'Shutting down virtual interface %s' "$i")" /sbin/ifup $i boot
+ done
+
+ for i in $interfaces_br_boot ; do
+ run_cmd -a "$(nls 'Shutting down bridge interface %s' "$i")" /sbin/ifdown $i boot
+ done
+
+ for i in $interfaces_sit_boot $interfaces_vlan_boot $interfaces_boot ; do
+ run_cmd -a "$(nls 'Shutting down interface %s' "$i")" /sbin/ifdown $i boot
+ done
+
+ network_deinit
+
+ rm -f /var/lock/subsys/network >/dev/null 2>&1
+}
+
+# Reload all active interfaces
+reload() {
+ if [ ! -f /var/lock/subsys/network ]; then
+ msg_not_running network
+ RETVAL=7
+ return
+ fi
+
+ set_dhcpclient
+
+ # if no DHCP client found we can't reload anything
+ if [ -z "$DHCP_CLIENT" ]; then
+ return
+ fi
+
+ local DHCP_ARGS
+ case ${DHCP_CLIENT##*/} in
+# pump)
+# DHCP_ARGS=""
+# ;;
+ dhcpcd)
+ DHCP_ARGS="-n"
+ ;;
+# dhcpxd)
+# DHCP_ARGS=""
+# ;;
+# dhclient)
+# DHCP_ARGS=""
+# ;;
+ *)
+ echo "Reloading using $DHCP_CLIENT DHCP Client is not implmemented in rc-scripts"
+ RETVAL=1
+ return
+ ;;
+ esac
+
+ # for IPv4 DHCP interfaces send signal to refresh interface
+ local dev devs=${*:-$(/sbin/ip link show | awk -F: '/UP/{print $2}')}
+ for dev in $devs; do
+ if [ ! -f /etc/sysconfig/interfaces/ifcfg-$dev ]; then
+ continue
+ fi
+ . /etc/sysconfig/interfaces/ifcfg-$dev
+
+ if [ -n "$BOOTPROTO" -a "$BOOTPROTO" != "none" -a "$BOOTPROTO" != "static" ] && is_yes "$IPV4_NETWORKING"; then
+ case ${DHCP_CLIENT##*/} in
+ pump)
+ DHCP_ARGS="$DHCP_ARGS -i $DEVICE"
+ ;;
+ dhcpcd)
+ DHCP_ARGS="$DHCP_ARGS $DEVICE"
+ ;;
+ dhcpxd)
+ DHCP_ARGS="$DHCP_ARGS $DEVICE"
+ ;;
+ dhclient)
+ DHCP_ARGS="$DHCP_ARGS $DEVICE"
+ ;;
+ esac
+ DHCP_ARGS="$DHCP_OPTIONS $DHCP_ARGS"
+
+ show 'Reloading interface %s' $dev
+ if $DHCP_CLIENT $DHCP_ARGS; then
+ ok
+ else
+ fail
+ fi
+ fi
+ done
+
+}
+
+find_boot_interfaces
+
+# See how we were called.
+case "$1" in
+ start)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ touch /var/lock/subsys/network
+ else
+ start
+ fi
+ ;;
+ start_init)
+ network_init
+ ;;
+ start_postinit)
+ network_postinit
+ touch /var/lock/subsys/network
+ ;;
+ stop_deinit)
+ network_deinit
+ rm -f /var/lock/subsys/network
+ ;;
+ stop)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ rm -f /var/lock/subsys/network >/dev/null 2>&1
+ else
+ stop
+ fi
+ ;;
+
+ status)
+ nls "Configured devices:"
+ echo "lo $interfaces"
+ nls "Configured tunnels:"
+ echo "$tunnels"
+ echo
+ nls "Currently inactive devices and tunnels:"
+ /sbin/ip link show | awk -F":" '(/^[0-90-90-9]:/) && ! (/UP/) { print $2 }' | xargs
+ nls "Currently active devices and tunnels:"
+ /sbin/ip link show | awk -F":" ' (/UP/) { print $2 }' | xargs
+ ;;
+
+ reload)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+ shift
+ reload ${1:+"$@"}
+ ;;
+
+ restart)
+ if is_yes "$VSERVER_ISOLATION_NET"; then
+ exit 0
+ fi
+
+ stop
+ start
+ ;;
+
+ *)
+ msg_usage "$0 {start|stop|reload|restart|status}"
+ exit 3
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# random Script to snapshot random state and reload it at boot time.
+#
+# chkconfig: 12345 20 80
+#
+# description: Saves and restores system entropy pool for higher quality \
+# random number generation.
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# do nothing in vserver
+if is_yes "$VSERVER"; then
+ return
+fi
+
+random_seed=/var/run/random-seed
+
+poolfile=/proc/sys/kernel/random/poolsize
+[ -r $poolfile ] && bytes="$(cat $poolfile)" || bytes=512
+
+start() {
+ # Check if the service is already running?
+ if [ -f /var/lock/subsys/random ]; then
+ return
+ fi
+
+ show "Initializing random number generator"
+ busy
+ # Carry a random seed from start-up to start-up
+ if [ -f $random_seed ]; then
+ cat $random_seed >/dev/urandom
+ else
+ touch $random_seed
+ fi
+ chmod 600 $random_seed
+ dd if=/dev/urandom of=$random_seed count=1 bs=$bytes 2>/dev/null
+ touch /var/lock/subsys/random
+ deltext
+ ok
+}
+
+stop() {
+ if [ ! -f /var/lock/subsys/random ]; then
+ return
+ fi
+
+ # Carry a random seed from shut-down to start-up
+ show "Saving random seed"
+ busy
+ touch $random_seed
+ chmod 600 $random_seed
+ dd if=/dev/urandom of=$random_seed count=1 bs=$bytes 2>/dev/null
+
+ rm -f /var/lock/subsys/random >/dev/null 2>&1
+ deltext
+ ok
+}
+
+status() {
+ entropy_avail="$(cat /proc/sys/kernel/random/entropy_avail)"
+ if [ "$entropy_avail" -eq 0 -o ! -c /dev/random ] ; then
+ nls "The random data source is missing"
+ RETVAL=1
+ else
+ nls "%d bytes of entropy available" $entropy_avail
+ fi
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ status)
+ status
+ ;;
+ *)
+ msg_usage "$0 {start|stop|status}"
+ exit 3
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# single Script for sedding up administrative/rescue shell.
+#
+# chkconfig: 1 00 00
+# description: This file is executed by init when it goes into runlevel \
+# 1, which is the administrative state. It kills all \
+# deamons and then puts the system into single user mode. \
+# Note that the file systems are kept mounted. \
+#
+# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+case "$1" in
+ stop*)
+ exit 0
+ ;;
+ start*)
+ # Kill all processes.
+ [ "${BASH+bash}" = bash ] && enable kill
+
+ run_cmd "Sending all processes the TERM signal" killall5 -15
+ sleep 5
+ run_cmd "Sending all processes the KILL signal" killall5 -9
+
+ rm -f /var/lock/subsys/* >/dev/null 2>&1
+
+ # this looks nicer
+ [ -x /usr/bin/clear ] && /usr/bin/clear
+
+ # make sure modprobe is working
+ if [ -f /proc/sys/kernel/modprobe ]; then
+ sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
+ fi
+
+ # If they want to run something in single user mode, might as well run it...
+ for i in /etc/rc.d/rc1.d/S[0-9][0-9]*; do
+ # Check if the script is there.
+ [ ! -f $i ] && continue
+
+ # Don't run [KS]??foo.{rpmsave,rpmorig} scripts
+ [ "${i%.rpmsave}" != "${i}" ] && continue
+ [ "${i%.rpmorig}" != "${i}" ] && continue
+ [ "${i%.rpmnew}" != "${i}" ] && continue
+ [ "$i" = "/etc/rc.d/rc1.d/S00single" ] && continue
+ $i start
+ done
+
+ # Now go to the single user level.
+ show "Telling INIT to go to single user mode"; ok
+ exec init -t1 S
+ ;;
+esac
--- /dev/null
+#!/bin/sh
+#
+# sys-chroots Starts and stops services in chroots
+#
+# chkconfig: 2345 99 01
+# description: This shell script starts and stops services in chroots
+
+[ -r /etc/sysconfig/system ] && . /etc/sysconfig/system
+[ -n "$2" ] && SYSTEM_CHROOTS="$2"
+
+if [ -z "$SYSTEM_CHROOTS" ]; then
+ case "$1" in
+ start|stop|restart)
+ exit 0
+ ;;
+ esac
+fi
+
+CMD="$1"
+
+set $(runlevel)
+runlevel=$2
+previous=$1
+export runlevel previous
+
+[ -z "$runlevel" -o -z "$previous" -o "$runlevel" = "$previous" ] && exit 0
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+start() {
+ if [ "$previous" = "N" ]; then
+ runlevel=5
+ previous=0
+ export runlevel previous
+ fi
+
+ if [ -f /var/lock/subsys/sys-chroots ]; then
+ msg_already_running "System chroots services"
+ return
+ fi
+
+ msg_starting "System chroots services"; started
+
+ for dir in $SYSTEM_CHROOTS; do
+ [ ! -x "$dir/etc/rc.d/rc" ] && continue
+ msg_starting "System chroots services for $dir"; started
+
+ # Cleaning part, keep in sync with rc.sysinit
+
+ chroot $dir sh -c '
+ . /etc/rc.d/init.d/functions
+ # Clear mtab
+ > /etc/mtab
+ [ -f /etc/cryptomtab ] && > /etc/cryptomtab
+
+ # Remove stale backups
+ rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~
+
+ # Clean up /var
+ # I would d use find, but /usr may not be mounted.
+ for afile in /var/lock/* /var/run/*; do
+ bafile=$(basename $afile)
+ if [ -d "$afile" ]; then
+ [ "$bafile" != "news" -a "$bafile" != "sudo" -a "$bafile" != "mon" ] && rm -rf $afile/*
+ else
+ [ "$bafile" != "hwprofile" ] && rm -f $afile 2> /dev/null
+ fi
+ done
+ # Delete stale files
+ rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
+ /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
+ rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
+ /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
+ /tmp/scrollkeeper-* /tmp/ssh-*
+
+ # Clean up utmp/wtmp
+ rm -f /var/run/utmpx
+ > /var/run/utmp
+ if [ -e /var/log/wtmpx ]; then
+ if [ -e /var/log/wtmp ]; then
+ rm -f /var/log/wtmpx
+ else
+ mv /var/log/wtmpx /var/log/wtmp
+ fi
+ fi
+ touch /var/log/wtmp
+ chown root:utmp /var/run/utmp /var/log/wtmp
+ chmod 0664 /var/run/utmp /var/log/wtmp
+ # Clean /tmp
+ if is_yes "$CLEAN_TMP"; then
+ rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
+ fi
+ '
+
+ # Do our things
+
+ # proc
+ chroot $dir mount -o gid=17 -t proc proc /proc
+ # usbfs, if available
+ if [ -f /proc/bus/usb/devices ]; then
+ chroot $dir mount -t usbfs usbfs /proc/bus/usb
+ fi
+ # sysfs is also needed before any other things (under kernel > 2.5)
+ if grep -q sysfs /proc/filesystems ; then
+ chroot $dir mount -o gid=17 -t sysfs sysfs /sys
+ fi
+ # selinux
+ if grep -q selinuxfs /proc/filesystems ; then
+ chroot $dir mount -o gid=17 -t selinuxfs selinuxfs /selinux
+ fi
+ chroot $dir mount -a
+ # network
+ [ -f /var/lock/subsys/network ] && touch $dir/var/lock/subsys/network
+ # other
+ chroot $dir /sbin/chkconfig single off
+ rm -f $dir/etc/rc.d/rc*.d/K*single
+ # run it
+ chroot $dir /etc/rc.d/rc $runlevel chroot
+ done
+
+ touch /var/lock/subsys/sys-chroots
+}
+
+stop() {
+ # Stop daemons.
+ if [ "$previous" = "N" ]; then
+ runlevel=0
+ previous=5
+ export runlevel previous
+ fi
+
+ if [ ! -f /var/lock/subsys/sys-chroots ]; then
+ msg_not_running "System chroots services"
+ return
+ fi
+
+ msg_stopping "System chroots services"; started
+ for dir in $SYSTEM_CHROOTS; do
+ [ ! -x "$dir/etc/rc.d/rc" ] && continue
+ msg_stopping "System chroots services for $dir"; started
+ rm -f $dir/var/lock/subsys/network
+ chroot $dir /etc/rc.d/rc $runlevel chroot
+ chroot $dir sh -c "grep -q selinuxfs /proc/filesystems && umount /selinux"
+ chroot $dir sh -c "grep -q sysfs /proc/filesystems && umount /sys"
+ chroot $dir umount -a
+ chroot $dir umount /proc
+ done
+ rm -f /var/lock/subsys/sys-chroots >/dev/null 2>&1
+}
+
+RETVAL=0
+# See how we were called.
+case "$CMD" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart)
+ stop
+ start
+ ;;
+ status)
+ # TODO: running each service with status parameter
+ for dir in $SYSTEM_CHROOTS; do
+ echo "System chroots services for $dir"
+ chroot $dir /sbin/chkconfig --list
+ done
+ exit $?
+ ;;
+ *)
+ msg_usage "$0 {start|stop|restart|status}"
+ exit 3
+esac
+
+exit $RETVAL
--- /dev/null
+#!/bin/sh
+#
+# rc This file is responsible for starting/stopping
+# services when the runlevel changes. It is also
+# responsible for the very first setup of basic
+# things, such as setting the hostname.
+#
+#
+# Original Author:
+# Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+#
+
+# avoid being interrupted by child or keyboard
+trap ":" INT QUIT TSTP
+
+# Save argument
+argv1="$1"
+argv2="$2"
+
+# Get terminal size of standard input of the system console
+[ -z "$CONSOLE" ] && CONSOLE=/dev/console
+if [ -c $CONSOLE ]; then
+ set -- $(stty size < $CONSOLE 2>/dev/null)
+ LINES=$1
+ COLUMNS=$2
+else
+ LINES=
+ COLUMNS=
+fi
+export LINES COLUMNS CONSOLE
+
+# NLS
+if [ -f /etc/sysconfig/i18n ]; then
+ . /etc/sysconfig/i18n
+ [ -n "$LANG" ] && export LANG || unset LANG
+ [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
+ [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
+ [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
+ [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
+ [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
+ [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
+ [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
+ [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
+ [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
+fi
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+if [ "$argv2" != "chroot" ]; then
+ # Now find out what the current and what the previous runlevel are.
+ set $(runlevel)
+ runlevel=$2
+ previous=$1
+ export runlevel previous
+fi
+
+# Get first argument. Set new runlevel to this argument.
+[ -n "$argv1" ] && runlevel="$argv1"
+
+# if previous runlevel = current runlevel do nothing
+[ "$runlevel" = "$previous" ] && exit 0
+
+# Tell linuxconf what runlevel we are in
+[ -d /var/run -a -w /var/run ] && echo "/etc/rc.d/rc$runlevel.d" > /var/run/runlevel.dir
+
+# if runlevel is 0 (halt) or 6 (reboot) change to first
+# virtual console, and send messages to /dev/console
+# (it can be serial console too)
+if [ "$COLUMNS" -gt 0 ]; then
+ if [ "$argv2" != "chroot" ] && ! is_yes "$VSERVER" && \
+ [ "$runlevel" = "0" -o "$runlevel" = "6" ]; then
+ CONSOLE=/dev/tty1
+ [ -x /usr/bin/chvt ] && /usr/bin/chvt 1 && echo > $CONSOLE
+ exec 0<> /dev/console 1>&0 2>&0
+ fi
+else
+ # Serial: columns and lines are not defined
+ LINES=24
+ COLUMNS=80
+fi
+
+# See if we want to be in user confirmation mode
+if [ "$previous" = "N" ]; then
+ if ! is_yes "$VSERVER" && grep -qi confirm /proc/cmdline >/dev/null 2>/dev/null \
+ || [ -f /var/run/confirm ]; then
+ rm -f /var/run/confirm
+ CONFIRM="yes"
+ nls "Entering interactive startup"
+ else
+ CONFIRM=
+ nls "Entering non-interactive startup"
+ fi
+fi
+
+# calculate bootsplash variables
+sscripts=0
+for i in /etc/rc.d/rc$runlevel.d/S*; do
+ [ ! -f $i ] && continue
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+ [ "${1%.rpmnew}" != "${1}" ] && continue
+ subsys=${i#/etc/rc.d/rc$runlevel.d/S??}
+ [ -f /var/lock/subsys/$subsys ] && \
+ [ ! -f /var/lock/subsys/${subsys}.init ] && continue
+ sscripts=$(( sscripts + 1 ))
+done
+export sscripts
+
+if test "$previous" != "N" ; then
+ kscripts=0
+ for i in /etc/rc.d/rc$runlevel.d/K*; do
+ [ ! -f $i ] && continue
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+ [ "${1%.rpmnew}" != "${1}" ] && continue
+ subsys=${i#/etc/rc.d/rc$runlevel.d/K??}
+ [ ! -f /var/lock/subsys/$subsys ] && \
+ [ ! -f /var/lock/subsys/${subsys}.init ] && continue
+ kscripts=$(( kscripts + 1 ))
+ done
+ export kscripts
+fi
+
+if test "$previous" = "N" -a "$runlevel" = "5" ; then
+ export progress=16
+ sscripts=$(( $sscripts + 15 ))
+else
+ export progress=0
+fi
+
+if is_yes "$VSERVER"; then
+ # if runlevel is not 0 (halt) or 6 (reboot) run rc.sysinit
+ # BUT only if rc is run standalone (not run by init, as init will run rc.sysinit)
+ if [ "$previous" != "N" -a "$runlevel" != "0" -a "$runlevel" != "6" ]; then
+ /etc/rc.d/rc.sysinit $runlevel
+ fi
+fi
+
+# set onlcr to avoid staircase effect and do not lock scrolling
+stty onlcr -ixon 0>&1 2>/dev/null
+
+# Say something ;)
+af2=$(termput setaf $CRESMAN)
+af6=$(termput setaf $CBRACKETS)
+af7=$(termput op)
+text="$(termput op)$(nls '%sResource Manager: %sEntering runlevel number' "$af2" "$af7")"
+text_size="$(nls '%sResource Manager: %sEntering runlevel number' "" "")"
+resp_size="$(nls 'DONE')"
+{
+ local _len=${#text_size}
+ local _last_col=$(($INIT_COL+${#resp_size}-${#runlevel}))
+ while [ $((_len++)) -lt $_last_col ]; do
+ text="$text."
+ done
+ echo -n "$text"
+}
+echo "${af6}[${af2} $runlevel ${af6}]${af7}"
+
+# Is there an rc directory for this new runlevel?
+if [ -d /etc/rc.d/rc$runlevel.d ]; then
+ # First, run the KILL scripts.
+ for i in /etc/rc.d/rc$runlevel.d/K*; do
+ # Check if the script is there.
+ [ ! -f $i ] && continue
+
+ # Don't run [KS]??foo.{rpmsave,rpmorig,rpmnew} scripts
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+ [ "${1%.rpmnew}" != "${1}" ] && continue
+
+ # Check if the subsystem is already up.
+ subsys=${i#/etc/rc.d/rc$runlevel.d/K??}
+ [ ! -f /var/lock/subsys/$subsys ] && \
+ [ ! -f /var/lock/subsys/${subsys}.init ] && continue
+
+ rc_splash "$i stop"
+
+ # Bring the subsystem down.
+ $i stop
+ done
+
+ # Now run the START scripts.
+ for i in /etc/rc.d/rc$runlevel.d/S*; do
+ # Check if the script is there.
+ [ ! -f $i ] && continue
+
+ # Don't run [KS]??foo.{rpmsave,rpmorig} scripts
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+ [ "${1%.rpmnew}" != "${1}" ] && continue
+
+ # Check if the subsystem is already up.
+ subsys=${i#/etc/rc.d/rc$runlevel.d/S??}
+ [ -f /var/lock/subsys/$subsys ] || \
+ [ -f /var/lock/subsys/${subsys}.init ] && continue
+
+ # If we're in confirmation mode, get user confirmation
+ [ -n "$CONFIRM" ] &&
+ {
+ confirm $subsys
+ case $? in
+ 0)
+ :
+ ;;
+ 2)
+ CONFIRM=
+ ;;
+ *)
+ continue
+ ;;
+ esac
+ }
+
+ rc_splash "$i start"
+ # Bring the subsystem up.
+ $i start
+ done
+fi
+
+# if runlevel is 0 (halt) or 6 (reboot) run rc.shutdown
+if [ "$runlevel" = "0" ] || [ "$runlevel" = "6" ]; then
+ unset LANG
+ unset LC_CTYPE
+ unset LC_NUMERIC
+ unset LC_TIME
+ unset LC_COLLATE
+ unset LC_MONETARY
+ unset LC_MESSAGES
+ unset LC_PAPER
+ unset LC_NAME
+ unset LC_ADDRESS
+ unset LC_TELEPHONE
+ unset LC_MEASUREMENT
+ unset LC_IDENTIFICATION
+ unset LC_ALL
+ TMPDIR=/dev/null
+ export TMPDIR
+ if [ "$argv2" != "chroot" ]; then
+ exec /etc/rc.d/rc.shutdown $runlevel $previous
+ else
+ exit 0
+ fi
+else
+ if is_yes "$RUN_LDCONFIG" || [ ! -f /etc/ld.so.cache ] ; then
+ if [ -x /sbin/ldconfig ]; then
+ run_cmd "Setting up /etc/ld.so.cache" /sbin/ldconfig -X
+ fi
+ fi
+fi
+
+rc_splash "master"
+
+# Say something ;)
+text="$(nls '%sResource Manager: %sRunlevel has been reached' "$af2" "$af7")"
+text_size="$(nls '%sResource Manager: %sRunlevel has been reached' "" "")"
+
+_len=${#text_size}
+_last_col=$(($INIT_COL+${#resp_size}-${#runlevel}))
+while [ $((_len++)) -lt $_last_col ]; do
+ text="$text."
+done
+echo -n "$text"
+unset _len _last_col
+
+echo "${af6}[${af2} $runlevel ${af6}]${af7}"
+unset af2 af6 af7
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# If this script is intalled as /etc/rc.d/rc.init,
+# it is executed by init(8) for every program it
+# wants to spawn like this:
+#
+# /bin/sh /etc/rc.d/rc.init <id> <level> <action> <process>
+#
+# It can be used to set the default umask and ulimit
+# of all processes. See initscript(5) for more details.
+
+[ -r /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
+
+[ -n "$LANG" ] && export LANG || unset LANG
+[ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
+[ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
+[ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
+[ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
+[ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
+[ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
+[ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
+[ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
+[ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
+
+# Execute the program.
+eval exec "$4"
--- /dev/null
+#
+# This script will be executed *after* all the other init scripts.
+# You can put your own initialization stuff in here if you don't
+# want to do the full Sys V style init stuff.
+
--- /dev/null
+#!/bin/sh
+#
+# shutdown Common script for system halt/reboot.
+#
+# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+#
+
+# Set the path.
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+
+# move to root dir
+cd /
+
+IN_SHUTDOWN=yes
+
+. /etc/rc.d/init.d/functions
+
+# avoid keyboard interruption
+trap "echo" INT SEGV QUIT TERM
+set +e
+
+rc_splash "reboot"
+
+# Kill all processes.
+[ "${BASH+bash}" = bash ] && enable kill
+
+runlevel=$1
+previous=$2
+
+# Stop blogd before umounting /var
+if [ -x /sbin/blogd ]; then
+ killall -q -QUIT blogd
+fi
+
+if [ -e /dev/rtc -o -e /dev/rtc0 ]; then
+ run_cmd "$(nls 'Syncing hardware clock to system time')" hwclock --systohc
+fi
+
+# check for other processes.
+# there could be none if all services were terminated properly
+# pgrep -g 0 requires procps >= 3.2.6-1.1
+# XXX: pgrep is on /usr!
+pids=$(pgrep -g 0 -l -v | grep -v '^1 ')
+if [ -n "$pids" ] || [ ! -x /usr/bin/pgrep ]; then
+ run_cmd "Sending all processes the TERM signal" killall5 -15
+fi
+
+pids=$(pgrep -g 0 -l -v | grep -v '^1 ')
+if [ -n "$pids" ] || [ ! -x /usr/bin/pgrep ]; then
+ sleep 5
+ run_cmd "Sending all processes the KILL signal" killall5 -9
+fi
+
+# Write to wtmp file before unmounting /var
+halt -w
+
+if ! is_yes "$VSERVER"; then
+ # Turn off swap, then unmount file systems.
+ run_cmd "Turning off swap" swapoff -a
+
+ [ -x /etc/rc.d/rc.acct ] && /etc/rc.d/rc.acct stop
+
+ if [ -x /sbin/quotaoff ]; then
+ run_cmd "Turning off quotas for local filesystems" /sbin/quotaoff -a
+ fi
+
+ # grab kexec_loaded state before we umount /sys
+ kexec_loaded=`cat /sys/kernel/kexec_loaded 2>/dev/null`
+
+ # Unmount file systems, killing processes if we have to.
+ sig=-15
+ retry=3
+ force=
+ if [ -z "$UMOUNT_IGNORE" ]; then
+ UMOUNT_IGNORE="/"
+ else
+ UMOUNT_IGNORE="/ $UMOUNT_IGNORE"
+ fi
+ remaining=$(awk -v ig="^($UMOUNT_IGNORE)$" 'BEGIN { gsub(/[\t ]+/, "|", ig); } \
+ $3 !~ /^(proc|loopfs|devpts|devtmpfs|shm|iso9660|ramfs|tmpfs|sysfs|securityfs|squashfs)$/ \
+ && $1 !~ /^(none|\/dev\/root)$/ \
+ && $2 !~ ig {print $2}' /proc/mounts)
+ while [ -n "$remaining" -a "$retry" -gt 0 ]; do
+ show "Unmounting file systems"; busy
+ ERRORS=$(umount -a $force -t noproc 2>&1); rc=$?
+
+ # we might had unmounted /usr, recheck $TPUT availability
+ # but well. we need tput only for show() and busy() (ok() and fail() messages are already cached)
+ # TODO: look ahead the messages?
+ if is_yes "$TPUT"; then
+ TPUT=
+ rc_gettext_init
+ fi
+
+ if [ $rc = 0 ]; then
+ ok
+ else
+ fail
+ [ -n "$ERRORS" ] && echo "$ERRORS"
+ fi
+
+ sleep 2
+ remaining=$(awk -v ig="^($UMOUNT_IGNORE)$" 'BEGIN { gsub(/[\t ]+/, "|", ig); } \
+ $3 !~ /^(proc|loopfs|devpts|devtmpfs|shm|iso9660|ramfs|tmpfs|sysfs|securityfs|squashfs)$/ \
+ && $1 !~ /^(none|\/dev\/root)$/ \
+ && $2 !~ ig {print $2}' /proc/mounts)
+ [ -z "$remaining" ] && break
+ fuser -k -m $sig $remaining > /dev/null
+ sleep 5
+ retry=$(($retry-1))
+ sig=-9
+ force="-f"
+ done
+
+ run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
+
+ if [ -x /sbin/vgchange ]; then
+ lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
+ if [ "$lvmversion" = "2" ]; then
+ lvmsysinit="--sysinit"
+ else
+ lvmsysinit=""
+ fi
+ /sbin/vgchange -a n $lvmsysinit > /dev/null 2>&1
+ fi
+
+ if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then
+ if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null; then
+ /sbin/mdadm --stop --scan > /dev/null 2>&1
+ rc=$?
+ fi
+ fi
+
+ show "Remounting remaining filesystems ro mode"; busy
+ if mount | awk '/ext2|ext3|reiserfs|xfs|jfs/ { print $3 }' | while read line; do mount -n -o ro,remount $line; done; then
+ ok
+ else
+ fail
+ fi
+ _rebootwhat="system"
+else
+ _rebootwhat="vserver"
+fi
+
+if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
+ . /etc/rc.d/init.d/cryptsetup
+
+ show "Stopping disk encryption"
+ halt_crypto && ok || fail
+fi
+
+if [ "$runlevel" = "0" ] ; then
+ show "The $_rebootwhat is halted"; ok
+ if [ -f /fastboot ]; then
+ show "On the next boot fsck will be skipped."; ok
+ fi
+
+ if [ -f /etc/killpower -a -f /etc/sysconfig/ups ] ; then
+ . /etc/sysconfig/ups
+ if is_yes "$POWEROFF_UPS"; then
+ if [ -d /etc/ups.d ]; then
+ for i in /etc/ups.d/*.sh; do
+ [ ! -f $i -o ! -x $i ] && continue
+ $i poweroff
+ done
+ fi
+ [ -x /sbin/poweroff-ups ] && /sbin/poweroff-ups
+ fi
+ fi
+ [ "$previous" != "unknown" ] && halt -d -p -f
+else
+ show "Please stand by while rebooting the $_rebootwhat"; ok
+ if [ -f /fastboot ]; then
+ show "On the next boot fsck will be skipped."; ok
+ fi
+
+ if [ -x /sbin/kexec ] && [ "$kexec_loaded" = "1" ]; then
+ show "Will now restart with kexec"
+ /sbin/kexec -e
+ fail
+ fi
+
+ [ "$previous" != "unknown" ] && reboot -d -f
+fi
--- /dev/null
+#!/bin/sh
+#
+# /etc/rc.d/rc.sysinit - run once at boot time
+#
+# Taken in part from Miquel van Smoorenburg's bcheckrc.
+#
+
+# reasonable start values for bootsplash progress.
+export progress=0
+export sscripts=45
+export kscripts=45
+
+# NLS
+if [ -r /etc/sysconfig/i18n ]; then
+ . /etc/sysconfig/i18n
+ [ -n "$LANG" ] && export LANG || unset LANG
+ [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
+ [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
+ [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
+ [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
+ [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
+ [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
+ [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
+ [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
+ [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
+fi
+
+# Read network config data
+if [ -r /etc/sysconfig/network ]; then
+ . /etc/sysconfig/network
+else
+ NETWORKING=no
+ HOSTNAME=localhost
+fi
+
+CONSOLE_LOGLEVEL=1
+
+# Read functions
+. /lib/rc-scripts/functions
+
+modprobe_c_cache=""
+modprobe_c() {
+ if [ "$modprobe_c_cache" ]; then
+ echo "$modprobe_c_cache"
+ return
+ fi
+
+ # filter only what is wanted by this script: aliases and options
+ modprobe_c_cache=$(modprobe -c | grep -E '^(alias|options)')
+}
+
+# parse kernel cmdline
+# needs /proc mounted
+parse_cmdline() {
+ local arg cmdline
+ read cmdline < /proc/cmdline
+
+ for arg in $cmdline; do
+ case "$arg" in
+ noudev)
+ # default is set in /etc/sysconfig/system
+ START_UDEV=no
+ ;;
+ nomdadm)
+ # default is set in /etc/sysconfig/system
+ MDADM=no
+ ;;
+ nomultipath)
+ # default is set in /etc/sysconfig/system
+ DM_MULTIPATH=no
+ ;;
+ noselinux)
+ # default is set in /etc/sysconfig/system
+ SELINUX=no
+ ;;
+ nousb)
+ nousb=1
+ ;;
+ nohdparm)
+ nohdparm=1
+ ;;
+ fastboot)
+ fastboot=1
+ ;;
+ nopnp)
+ nopnp=1
+ ;;
+ nomodules)
+ nomodules=1
+ ;;
+ nofirewire)
+ nofirewire=1
+ ;;
+ nofsck)
+ nofsck=1
+ ;;
+ esac
+ done
+}
+
+# resolve a device node to its major:minor numbers in decimal or hex
+get_numeric_dev() {
+ local dev=$1 enc=${2:-hex} res
+
+ res=$(stat -Lc "%t:%T" "$dev")
+ if [ "$enc" = dec ]; then
+ local oifs=$IFS
+ IFS=":"
+ set -- $res
+ IFS=$oifs
+ res=$((0x$1)):$((0x$2))
+ fi
+ echo -n $res
+}
+
+# setup SELINUX variable
+init_selinux() {
+ # user knows!
+ if is_no "$SELINUX"; then
+ return
+ fi
+
+ if ! grep -Fq selinuxfs /proc/filesystems; then
+ # no support in kernel, no chance
+ SELINUX=no
+ fi
+
+ if ! is_fsmounted selinuxfs /selinux; then
+ mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
+ fi
+
+ # Check SELinux status
+ local selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
+ SELINUX=
+ if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
+ if [ -r $selinuxfs/enforce ] ; then
+ SELINUX=$(cat $selinuxfs/enforce)
+ else
+ # assume enforcing if you can't read it
+ SELINUX=1
+ fi
+ fi
+}
+
+disable_selinux() {
+ local _d selinuxfs _t _r
+
+ while read _d selinuxfs _t _r; do
+ [ "$_t" = "selinuxfs" ] && break
+ done </proc/mounts
+ echo "*** Warning -- SELinux is active"
+ echo "*** Disabling security enforcement for system recovery."
+ echo "*** Run 'setenforce 1' to reenable."
+ echo "0" > $selinuxfs/enforce
+}
+
+relabel_selinux() {
+ local _d selinuxfs _t _r
+
+ while read _d selinuxfs _t _r; do
+ [ "$_t" = "selinuxfs" ] && break
+ done </proc/mounts
+ echo "
+ *** Warning -- SELinux relabel is required. ***
+ *** Disabling security enforcement. ***
+ *** Relabeling could take a very long time, ***
+ *** depending on file system size. ***
+ "
+ echo "0" > $selinuxfs/enforce
+ /sbin/fixfiles -F relabel > /dev/null 2>&1
+ rm -f /.autorelabel
+ echo "*** Enabling security enforcement. ***"
+ echo $SELINUX > $selinuxfs/enforce
+}
+
+# Enable automatic swapon of all partitions with the proper swap magic.
+# This allows setting up swap without editing /etc/fstab.
+enable_autoswap() {
+ local swappartitions=$(blkid -t TYPE=swap -o device)
+ if [ -z "$swappartitions" ]; then
+ return
+ fi
+
+ local curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do echo -n " "; get_numeric_dev $x; echo -n " "; done)
+
+ local partition
+ for partition in $swappartitions; do
+ [ ! -e $partition ] && continue
+ majmin=$(get_numeric_dev $partition)
+ if ! strstr "$curswap" " $majmin "; then
+ run_cmd "$(nls 'Enabling local swap partitions: %s' $partition)" swapon $partition
+ fi
+ done
+}
+
+
+enable_swap() {
+ run_cmd "Activating swap" swapon -a "$@"
+ is_yes "$AUTOSWAP" && enable_autoswap
+}
+
+# Remove duplicate entries from mtab (for vserver guest use only)
+clean_vserver_mtab() {
+ > /etc/mtab.clean
+ while read device mountpoint line; do
+ grep -qs "$mountpoint" /etc/mtab.clean || \
+ echo "$device $mountpoint $line" >> /etc/mtab.clean
+ done < /etc/mtab
+ cat /etc/mtab.clean > /etc/mtab
+ rm -f /etc/mtab.clean
+}
+
+# Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
+load_kernel_modules() {
+ local modules_file=$1
+ local _x _y _z v v1 old_IFS kernel kerneleq
+ {
+ read _x _y v _z
+ old_IFS=$IFS
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
+ set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
+ IFS=$old_IFS
+
+ kernel="$1.$2"
+ kerneleq="$1.$2.$3"
+ } < /proc/version
+
+ local module args
+ # Loop over every line in modules file
+ ( \
+ grep -hvE '^(#|[[:blank:]]*$)' /etc/$modules_file /etc/$modules_file.$kernel /etc/$modules_file.$kerneleq 2>/dev/null
+ echo '' # make sure there is a LF at the end
+ ) | while read module args; do
+ [ -z "$module" ] && continue
+ # strip comments
+ args=${args%%#*}
+ show "Loading %s kernel module(s)" "$module"
+ busy
+ modprobe -s $module -- $args && ok || fail
+ done
+}
+
+# launch repair shell
+# which after exiting will reboot
+repair_shell() {
+ local reason="$2"
+
+ # don't use '\n' in nls macro !
+ echo
+ echo
+ echo "$reason"
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ [ "$SELINUX" = "1" ] && disable_selinux
+ if ! is_no "$RUN_SULOGIN_ON_ERR"; then
+ /sbin/sulogin
+ else
+ /bin/sh
+ fi
+
+ run_cmd "Unmounting file systems" umount -a
+ run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+}
+
+check_root_fs() {
+ show "Checking root filesystem"; started
+ initlog -c "fsck -C -T -a $fsckoptions /"
+ rc=$?
+
+ # A return of 4 or higher means there were serious problems.
+ if [ $rc -gt 3 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
+ # A return of 2 or 3 means that filesystem was repaired but we need
+ # to reboot.
+ elif [ "$rc" = "2" -o "$rc" = "3" ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ echo
+ nls "*** Filesystem was repaired but system needs to be"
+ nls "*** rebooted before mounting it."
+ nls "*** REBOOTING ***"
+ echo
+
+ run_cmd "Unmounting file systems" umount -a
+ mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+ elif [ "$rc" = "1" ]; then
+ _RUN_QUOTACHECK=1
+ fi
+}
+
+# mdadm - manage MD devices aka Linux Software RAID
+init_mdadm() {
+ if [ ! -x /sbin/mdadm -o ! -f /etc/mdadm.conf ]; then
+ return
+ fi
+
+ modprobe -s md
+ local rc=0 golvm=0 have_md=0
+ if [ ! -f /proc/mdstat ]; then
+ return
+ fi
+
+ # assume we have md if at least one ARRAY line is present
+ if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf; then
+ have_md=1
+ fi
+ # configured to do auto scanning
+ if [ $have_md = 0 ] && grep -qE "^([[:blank:]]|)DEVICE[[:blank:]]partitions" /etc/mdadm.conf; then
+ have_md=1
+ fi
+
+ # none found
+ if [ $have_md = 0 ]; then
+ return
+ fi
+
+ show "Starting up RAID devices"; busy
+ /sbin/mdadm --assemble --scan --auto=yes
+ rc=$?
+ if [ "$rc" -eq 0 -o "$rc" -eq 2 ]; then
+ # rc is used later too, so set sane value
+ rc=0
+ deltext; ok
+ golvm=1
+ else
+ deltext; fail
+ fi
+
+ # A non-zero return means there were problems
+ if [ $rc -gt 0 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ show "Starting up RAID devices"; fail
+
+ PS1="$(nls '(RAID Repair)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the RAID startup.')"
+ fi
+
+ # LVM on RAID (keep in sync with LVM init)
+ if [ "$golvm" -eq "1" ]; then
+ if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
+ run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmsysinit
+ [ "$lvmversion" = "2" ] && /sbin/vgmknodes
+ fi
+ fi
+ show "Starting up RAID devices"; ok
+ return $rc
+}
+
+# Init LVM
+init_lvm() {
+ if [ ! -x /sbin/vgscan -o ! -x /sbin/vgchange ] && ! is_yes "$EVMS_LVM"; then
+ return
+ fi
+
+ if is_no "$LVM2"; then
+ lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
+ else
+ lvmversion=2
+ fi
+
+ if [ "$lvmversion" = "1" ] ; then
+ modprobe -s lvm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
+ elif [ "$lvmversion" = "2" ] ; then
+ modprobe -s dm-mod
+ lvmignorelocking="--ignorelockingfailure"
+ lvmsysinit="--sysinit"
+ else
+ modprobe -s lvm-mod
+ # device mapper (2.5+ and patched 2.4)
+ modprobe -s dm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
+ fi
+
+ run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
+ if [ "$lvmversion" = "2" ]; then
+ /sbin/vgmknodes $lvmignorelocking
+ # display VG statistics
+ /sbin/vgdisplay -s $lvmignorelocking
+ fi
+}
+
+# boot logging to /var/log/boot.log. install showconsole package to get it.
+if ! is_no "$RC_BOOTLOG" && [ -x /sbin/blogd ]; then
+ RC_BOOTLOG=1
+else
+ RC_BOOTLOG=
+fi
+
+if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+ # we need /proc mounted before everything
+ is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
+
+ parse_cmdline
+
+ if [ -d /run ]; then
+ is_fsmounted tmpfs /run || mount -n -t tmpfs run /run
+ fi
+
+ # Early sysctls
+ apply_sysctl
+
+ # sysfs is also needed before any other things (under kernel > 2.5)
+ if ! is_fsmounted sysfs /sys; then
+ grep -Fq sysfs /proc/filesystems && mount -n -o gid=17 -t sysfs sysfs /sys
+ fi
+ if grep -Fq securityfs /proc/filesystems; then
+ mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
+ fi
+
+ init_selinux
+
+ # PLD Linux LiveCD support
+ if [ -x /etc/rc.d/rc.live ]; then
+ /etc/rc.d/rc.live
+ fi
+
+ # Choose Hardware profile
+ if ! is_no "$HWPROFILES" && [ -f /etc/sysconfig/hwprof ]; then
+ . /etc/sysconfig/hwprof
+ if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
+ mount -n / -o rw,remount
+ /sbin/hwprofile -qf
+ mount -n / -o ro,remount
+ fi
+ fi
+
+ # Disable splash when requested
+ is_no "$BOOT_SPLASH" && [ -e /proc/splash ] && echo "0" > /proc/splash
+
+ if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then
+ /sbin/restorecon -R /dev 2>/dev/null
+ fi
+
+ [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)"
+
+ if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
+ /sbin/setsysfont
+ fi
+fi
+
+
+# Print welcome message
+nls "\t\t\t%sPowered by %sPLD Linux Distribution%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CPLD)" "$(termput op)"
+if ! is_no "$RC_PROMPT"; then
+ nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)"
+ echo
+fi
+
+# Set the hostname
+if [ -z "${HOSTNAME}" ]; then
+ show "$(nls 'Host:') $(hostname)"; ok
+else
+ run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
+fi
+
+# Set the NIS domain name
+if [ -n "$NISDOMAIN" ]; then
+ run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
+else
+ domainname ""
+fi
+
+if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+ # Set console loglevel
+ if [ -n "$CONSOLE_LOGLEVEL" ]; then
+ dmesg -n $CONSOLE_LOGLEVEL
+ fi
+
+ if ! is_no "$START_UDEV" && [ -x /sbin/start_udev ] && [[ "$container" != lxc* ]]; then
+ is_fsmounted devtmpfs /dev || mount -n -t devtmpfs devtmpfs /dev
+ load_kernel_modules modules.preudev
+ /sbin/start_udev
+ elif [ -x /lib/firmware/firmware-loader.sh ]; then
+ /sbin/sysctl -q -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh
+ fi
+
+ # Unmount the initrd, if necessary
+ if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then
+ umount /initrd/dev 2>/dev/null
+ umount /initrd
+ /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
+ fi
+
+ # Start logging console output since we have all /dev stuff setup
+ if [ "$RC_BOOTLOG" ]; then
+ /sbin/blogd
+ fi
+
+ # Configure Linux kernel (initial configuration, some required modules still may be missing).
+ apply_sysctl
+
+ # Check if timezone definition is available
+ if [ -e /etc/localtime ] && [ -e /dev/rtc -o -e /dev/rtc0 ] ; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
+ else
+ TIME_SETUP_DELAYED=yes
+ fi
+
+ delay_cryptsetup=0
+ if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
+ # XXX might need modules dep
+ # Device mapper & related initialization
+ if ! grep -qF device-mapper /proc/devices; then
+ modprobe -s dm-mod
+ fi
+
+ . /etc/rc.d/init.d/cryptsetup
+ show "Starting disk encryption"
+ init_crypto 0
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
+
+ # Start up swapping
+ enable_swap -e
+
+ # Initialize USB controllers
+ usb=0
+ if [ -z "$nousb" ] && ! is_fsmounted usbfs /proc/bus/usb; then
+ aliases=$(modprobe_c | awk '/^alias[[:space:]]+usb[-_]controller[[:space:]]+/{ print $3 }')
+ if [ -n "$aliases" -a "$aliases" != "off" ] ; then
+ modprobe -s usbcore
+ for alias in $aliases ; do
+ [ "$alias" = "off" ] && continue
+ run_cmd "$(nls 'Initializing USB controller') ($alias)" modprobe -s $alias
+ done
+ [ $? -eq 0 -a -n "$aliases" ] && usb=1
+ fi
+ if grep -iq "usb" /proc/devices 2>/dev/null ; then
+ usb=1
+ fi
+ fi
+
+ if [ "$usb" = "1" -a -d /proc/bus/usb ] && ! is_fsmounted usbfs /proc/bus/usb; then
+ run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
+ fi
+
+ needusbstorage=
+ if [ "$usb" = "1" ]; then
+ needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null | grep -e "^I.*Cls=08" 2>/dev/null)
+ if [ "$(kernelverser)" -lt "002006" ]; then
+ grep -Fq 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe -s hid
+ mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
+ kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
+ if [ -n "$kbdoutput" ]; then
+ run_cmd "Initializing USB keyboard" modprobe -s keybdev
+ fi
+ if [ -n "$mouseoutput" ]; then
+ run_cmd "Initializing USB mouse" modprobe -s mousedev
+ fi
+ fi
+ fi
+
+ # Setup hdparm thing (if exists and is needed)
+ if [ -z "$nohdparm" ]; then
+ [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
+ fi
+
+ if [ -z "$fastboot" ] && [ -f /fastboot ]; then
+ fastboot=1
+ fi
+
+ if [ -f /fsckoptions ]; then
+ fsckoptions=$(cat /fsckoptions)
+ else
+ fsckoptions=''
+ fi
+
+ if [ -f /forcefsck ]; then
+ fsckoptions="-f $fsckoptions"
+ else
+ # Obey the fs_passno setting for / (see fstab(5))
+ # - find the / entry
+ # - make sure we have at least 6 fields
+ _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab)
+ fi
+
+ _RUN_QUOTACHECK=0
+ _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
+ _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
+
+ if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
+ check_root_fs
+ fi
+
+ # set up pnp and kernel pnp
+ if is_yes "$RUN_USERPNP" || is_yes "$RUN_KERNELPNP"; then
+ if [ -z "$nopnp" ] && is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
+ run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
+ fi
+ if [ -z "$nopnp" ] && is_yes "$RUN_KERNELPNP"; then
+ modprobe -s isa-pnp
+ if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
+ show "Setting up ISA PNP devices (kernelspace pnp)"; busy
+ grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
+ fi
+ fi
+ fi
+
+ _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab)
+ # Remount the root filesystem read-write
+ if [ -z "$_ROOTFS_RO" ]; then
+ run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
+ fi
+
+ # Update quotas if fsck was run on /
+ if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
+ run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug /
+ fi
+
+ # Clean up SELinux labels
+ if is_yes "$SELINUX"; then
+ for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache; do
+ [ -r $file ] && restorecon $file >/dev/null 2>&1
+ done
+ fi
+
+ if [ "$delay_cryptsetup" != 0 ]; then
+ show "Starting disk encryption using the RNG"
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
+else
+ # Start logging console output since we have all /dev stuff setup
+ if [ "$RC_BOOTLOG" ]; then
+ /sbin/blogd -q
+ fi
+fi
+
+# Remove stale backups
+rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1
+
+# Remove /etc/nologin when starting system
+[ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
+
+if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
+ show "Enabling Delay Login"; busy
+ echo > /etc/nologin
+ nls "System bootup in progress - please wait" >> /etc/nologin
+ echo >> /etc/nologin
+ chmod 644 /etc/nologin
+ cp -fp /etc/nologin /etc/nologin.boot
+ ok
+fi
+
+# The root filesystem is now read-write, so we can now log via
+# syslog() directly...
+if [ -n "$IN_INITLOG" ]; then
+ IN_INITLOG=""
+fi
+
+if ! is_yes "$VSERVER" && [[ "$container" != lxc* ]]; then
+ # Clear mtab
+ > /etc/mtab
+ [ -f /etc/cryptomtab ] && > /etc/cryptomtab
+
+ # Enter root, /proc, /sys and other into mtab.
+ mount -f / 2> /dev/null
+ mount -f /proc 2> /dev/null
+ if is_fsmounted devtmpfs /dev; then
+ mount -f -t devtmpfs devtmpfs /dev 2> /dev/null
+ fi
+ if is_fsmounted tmpfs /run; then
+ mount -f -t tmpfs run /run 2> /dev/null
+ fi
+
+ if is_fsmounted usbfs /proc/bus/usb; then
+ mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb 2> /dev/null
+ fi
+
+ if is_fsmounted sysfs /sys; then
+ mount -f -t sysfs sysfs /sys 2> /dev/null
+ if is_fsmounted securityfs /sys/kernel/security ; then
+ mount -f -t securityfs securityfs /sys/kernel/security 2> /dev/null
+ fi
+ fi
+
+ if is_fsmounted selinuxfs /selinux; then
+ mount -f -t selinuxfs selinuxfs /selinux 2> /dev/null
+ fi
+
+ if [ ! -f /proc/modules ]; then
+ USEMODULES=
+ elif [ -z "$nomodules" ]; then
+ USEMODULES=y
+ else
+ USEMODULES=
+ fi
+
+ uname_r=$(uname -r)
+ # Adjust symlinks as necessary in /boot to keep system services from
+ # spewing messages about mismatched System maps and so on.
+ if ! is_no "$SET_SLINKS"; then
+ if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map
+ fi
+ if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map
+ fi
+ fi
+
+ # Run depmod if RUN_DEPMOD != "no" and:
+ # a) user requested or RUN_DEPMOD="";
+ # b) modules.dep is missing
+ if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
+ if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then
+ run_cmd "Finding module dependencies" depmod -a
+ elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then
+ run_cmd "Finding module dependencies" depmod -A
+ fi
+ fi
+ unset uname_r
+
+ if [ -f /proc/sys/kernel/modprobe ]; then
+ if [ -n "$USEMODULES" ]; then
+ sysctl -q -w kernel.modprobe="/sbin/modprobe"
+ else
+ # We used to set this to NULL, but that causes
+ # 'failed to exec' messages"
+ sysctl -q -w kernel.modprobe="/bin/true"
+ fi
+ fi
+
+ # Load usb storage here, to match most other things
+ if [ -n "$needusbstorage" ]; then
+ modprobe -s usb-storage
+ fi
+
+ # Load firewire devices
+ if [ -z "$nofirewire" ]; then
+ aliases=$(modprobe_c | awk '/^alias[[:space:]]+ieee1394[-_]controller[[:space:]]+/{ print $3 }')
+ if [ -n "$aliases" -a "$aliases" != "off" ] ; then
+ for alias in $aliases ; do
+ [ "$alias" = "off" ] && continue
+ run_cmd "$(nls 'Initializing firewire controller') ($alias)" modprobe $alias
+ done
+ grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && modprobe -s sbp2
+ fi
+ fi
+
+ # Load sound modules if they need persistent DMA buffers
+ if modprobe_c | grep -q "^options sound dmabuf=1"; then
+ RETURN=0
+ alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[[:space:]]+/{ print $3 }')
+ if [ -n "$alias" -a "$alias" != "off" ] ; then
+ run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
+ RETURN=$?
+ fi
+ alias=$(modprobe_c | awk '/^alias[[:space:]]+sound[-_]slot[-_]0[[:space:]]+/ { print $3 }')
+ if [ -n "$alias" -a "$alias" != "off" ] ; then
+ run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
+ RETURN=$?
+ fi
+ fi
+
+ # Load modules
+ load_kernel_modules modules
+ for f in /etc/modules-load.d/*.conf; do
+ # already loaded by implicit "modules" load
+ [ "${f##*/}" = "modules.conf" ] && continue
+
+ [ -r $f ] || continue
+ load_kernel_modules ${f##/etc/}
+ done
+
+ if ! is_no "$DM_MULTIPATH" && [ -x /sbin/multipath ]; then
+ modprobe -s dm-mod
+ modprobe -s dm-multipath
+ # make nodes that were discarded due (possible) new /dev mount
+ /sbin/dmsetup mknodes
+ run_cmd "Activating dm-multipath" /sbin/multipath -v 0
+ /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
+ fi
+
+ if ! is_no "$DMRAID" && [ -x /sbin/dmraid ]; then
+ run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
+ fi
+
+ # Find and activate volume groups:
+ # EVMS
+ if is_yes "$EVMS_LVM" && [ -x /sbin/evms_activate ]; then
+ if [ "$(kernelverser)" -lt "002006" ]; then
+ # Linux 2.4 core modules
+ modprobe -s evms
+ modprobe -s evms_passthru
+ modprobe -s ldev_mgr
+ modprobe -s dos_part
+ else
+ # Linux 2.6 core module
+ modprobe -s evmscore
+ fi
+
+ is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part
+ is_yes "$EVMS_LVM" && modprobe -s lvm_vge
+ is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge
+ is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge
+ run_cmd "Discovering EVMS volumes" /sbin/evms_activate
+ if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
+ # Link nodes for compatibility with LVM
+ if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then
+ ln -s /dev/evms/lvm/* /dev
+ fi
+ fi
+ fi
+
+ # Init LVM
+ if ! is_no "$LVM2"; then
+ init_lvm
+ fi
+
+ if [ "$delay_cryptsetup" != 0 ]; then
+ show "Starting disk encryption"
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
+
+ if ! is_no "$MDADM"; then
+ init_mdadm
+ fi
+
+ _RUN_QUOTACHECK=0
+ # Check filesystems
+ if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then
+ rc_splash "fsck start"
+ show "Checking filesystems"; started
+ initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
+
+ rc=$?
+
+ # A return of 2 or higher means there were serious problems
+ if [ $rc -gt 1 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
+ elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
+ _RUN_QUOTACHECK=1
+ fi
+ rc_splash "fsck stop"
+ fi
+
+ # Mount all other filesystems (except for NFS and /proc, which is already
+ # mounted). Contrary to standard usage,
+ # filesystems are NOT unmounted in single user mode.
+ run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
+
+ # now we have /usr mounted, recheck if we have gettext and tput available.
+ if is_no "$TPUT"; then
+ GETTEXT=
+ TPUT=
+ rc_gettext_init
+ fi
+
+ # Now do some workaround - encrypted filesystems couldn't have been fsck-ed
+ # before mount - that's where the password is entered.
+ # mount is buggy - when remounting loopback filesystem, loop=XXX
+ # option is removed from /etc/mtab
+ if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then
+ show "Checking encrypted filesystems"; started
+ LOOPLIST="$(LC_ALL=C awk '
+ FILENAME=="/proc/mounts" {
+ TAB[$2]=$1;
+ }
+ FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && /[^a-zA-Z_]ro[^a-zA-Z_]/ {
+ if ($2 in TAB){print TAB[$2];}
+ }
+ FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
+ if ($2 in TAB){print TAB[$2];}
+ sub("loop(=[^,]*)?","loop=" TAB[$2] ",ro",$4);
+ cmd="mount " $2 " -o remount," $4;
+ system(cmd);
+ }
+ ' /proc/mounts /etc/fstab)"
+ initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST"
+ rc=$?
+
+ # A return of 2 or higher means there were serious problems.
+ if [ $rc -gt 1 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
+ elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
+ _RUN_QUOTACHECK=1
+ fi
+
+ show "Remounting encrypted filesystems back in rw mode"; busy
+ LC_ALL=C awk '
+ FILENAME=="/proc/mounts" {
+ TAB[$2]=$1;
+ }
+ FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
+ sub("loop(=[^,]*)?","loop=" TAB[$2] ",rw",$4);
+ cmd="mount " $2 " -o remount," $4;
+ system(cmd);
+ }
+ ' /proc/mounts /etc/fstab
+ ok
+ fi
+
+ # /var/log should be writable now, so start saving the boot output
+ if [ "$RC_BOOTLOG" ]; then
+ echo > /var/log/boot.log
+ killall -IO blogd
+ fi
+
+ if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
+ run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
+ fi
+
+ # Turn on quota
+ if [ -x /sbin/quotaon ]; then
+ run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
+ fi
+
+ # Turn on process accounting
+ if [ -x /etc/rc.d/rc.acct ]; then
+ /etc/rc.d/rc.acct start
+ fi
+
+ # Set the clock if timezone definition wasn't available (eg. /usr not mounted)
+ if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc -o -e /dev/rtc0 ]; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
+ fi
+
+ # Initialize the serial ports
+ if [ -f /etc/rc.d/rc.serial ]; then
+ . /etc/rc.d/rc.serial
+ fi
+
+ if [ -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" -a -f /proc/sys/kernel/panic ]; then
+ show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
+ # DEPRECATED: use /etc/sysctl.conf or kernel commandline instead
+ if sysctl -q -w kernel.panic=$PANIC_REBOOT_TIME; then ok; else fail; fi
+ fi
+
+ # ... and here finish configuring parameters
+ apply_sysctl
+else
+ # /var/log should be writable now, so start saving the boot output
+ if [ "$RC_BOOTLOG" ]; then
+ echo > /var/log/boot.log
+ killall -IO blogd
+ fi
+
+ clean_vserver_mtab
+fi
+
+is_yes "$SELINUX" && [ -f /.autorelabel ] && relabel_selinux
+
+# Clean up /.
+rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1
+
+# Clean up /var
+# /usr could be still not mounted if it is on NFS.
+for afile in /var/lock/* /var/run/*; do
+ bafile=${afile##*/}
+ if [ -d "$afile" ]; then
+ case $bafile in
+ news|sudo|mon|cvs)
+ ;;
+ *)
+ echo $afile/* | xargs rm -rf
+ ;;
+ esac
+ else
+ [ "$bafile" != "hwprofile" -a "$bafile" != "random-seed" ] && rm -f $afile 2> /dev/null
+ fi
+done
+
+# Delete stale files
+rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
+ /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
+rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
+ /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
+ /tmp/scrollkeeper-* /tmp/ssh-*
+
+{
+# Clean up utmp/wtmp
+rm -f /var/run/utmpx
+> /var/run/utmp
+if [ -e /var/log/wtmpx ]; then
+ if [ -e /var/log/wtmp ]; then
+ rm -f /var/log/wtmpx
+ else
+ mv /var/log/wtmpx /var/log/wtmp
+ fi
+fi
+touch /var/log/wtmp
+chown root:utmp /var/run/utmp /var/log/wtmp
+chmod 0664 /var/run/utmp /var/log/wtmp
+
+# Clean /tmp
+if is_yes "$CLEAN_TMP" && ! is_fsmounted tmpfs /tmp; then
+ LC_ALL=C rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
+fi
+
+# System protected dirs
+mkdir -m 1777 -p /tmp/.ICE-unix > /dev/null 2>&1
+chown root:root /tmp/.ICE-unix
+is_yes "$SELINUX" && restorecon /tmp/.ICE-unix >/dev/null 2>&1
+
+test -d /var/run/netreport || mkdir -m 770 /var/run/netreport
+
+if ! is_yes "$VSERVER"; then
+ enable_swap
+
+ # If a SCSI tape has been detected, load the st module unconditionally
+ # since many SCSI tapes don't deal well with st being loaded and unloaded
+ if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
+ if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
+ if [ -n "$USEMODULES" ] ; then
+ # Try to load the module. If it fails, ignore it...
+ insmod -p st >/dev/null 2>&1 && modprobe -s st
+ fi
+ fi
+ fi
+
+ # Now that we have all of our basic modules loaded and the kernel going,
+ # let's dump the syslog ring somewhere so we can find it later
+ mode=0600
+ if [ "$(cat /proc/sys/kernel/dmesg_restrict)" = 0 ]; then
+ mode=0644
+ fi
+ dmesg --raw > /var/log/dmesg
+ chmod $mode /var/log/dmesg
+ i=5
+ while [ $i -ge 0 ]; do
+ if [ -f /var/log/dmesg.$i ]; then
+ mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
+ fi
+ i=$(($i-1))
+ done
+ cp -pf /var/log/dmesg /var/log/dmesg.0
+fi
+
+if ! is_no "$RC_PROMPT"; then
+ while :; do
+ pid=$(/sbin/pidof getkey)
+ [ -n "$pid" -o -e /var/run/getkey_done ] && break
+ usleep 100000
+ done
+ [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
+fi
+} &
+
+# /proc extra check if the background process we just spawned is still running,
+# as in case of vserver bootup it finishes quite instantly.
+if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
+ /sbin/getkey i && touch /var/run/confirm
+ touch /var/run/getkey_done
+fi
+wait
+if ! is_no "$RC_PROMPT"; then
+ rm -f /var/run/getkey_done
+fi
+echo
--- /dev/null
+#!/bin/sh
+
+# run-parts - concept taken from Debian
+#
+# modified for PLD Linux by Pawel Wilk <siefca@pld-linux.org>
+#
+# NOTE:
+# 1.) run-parts is now able to get arguments!
+# 2.) relative pathname of the invoked directory can be
+# obtained by reading RUNPARTS_DIR env. variable
+# 3.) absolute pathname of the invoked directory can be
+# obtained by reading RUNPARTS_ADIR env. variable
+#
+
+# keep going when something fails
+set +e
+
+if [ "$1" = "--test" ]; then
+ test=yes
+ shift
+fi
+
+if [ "$1" = "--" ]; then
+ shift
+fi
+
+# std checks
+if [ $# -lt 1 ]; then
+ echo "Usage: run-parts [-u] [--test] <dir> <args...>"
+ exit 1
+fi
+
+if [ ! -d $1 ]; then
+ echo "Is not a directory: $1"
+ echo "Usage: run-parts [-u] [--test] <dir> <args...>"
+ exit 1
+fi
+
+# assign passed dir name
+RUNPARTS_DIR=$1
+
+# assign absolute dir name
+olddir=$(pwd)
+cd $RUNPARTS_DIR
+RUNPARTS_ADIR=$(pwd)
+cd $olddir
+unset olddir
+
+# export directories for our descendants
+export RUNPARTS_ADIR RUNPARTS_DIR
+
+# shift args
+shift
+
+# Ignore *~ and *, scripts
+for i in $RUNPARTS_DIR/*[!~,] ; do
+ [ -d "$i" ] && continue
+ # Don't run *.{rpmsave,rpmorig,rpmnew,swp} scripts
+ [ "${i%.rpmsave}" != "${i}" ] && continue
+ [ "${i%.rpmorig}" != "${i}" ] && continue
+ [ "${i%.rpmnew}" != "${i}" ] && continue
+ [ "${i%.swp}" != "${i}" ] && continue
+ [ "${i%,v}" != "${i}" ] && continue
+
+ if [ -x "$i" ]; then
+ runprog="$i $@"
+ if [ "$test" = yes ]; then
+ echo "$runprog"
+ continue
+ fi
+ $runprog 2>&1 | awk -v "progname=$i" \
+ 'progname {
+ print progname ":\n"
+ progname="";
+ }
+ { print; }'
+ fi
+done
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+# Set up a default search path.
+PATH="/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin"
+export PATH
+
+is_ignored_file() {
+ case "$1" in
+ skeleton | README | *.dpkg-dist | *.dpkg-old | rc | rcS | single | reboot | bootclean.sh)
+ return 0
+ ;;
+ *rpmorig | *rpmnew | *rpmsave | *~ | *.orig)
+ return 0
+ ;;
+ esac
+ return 1
+}
+
+# check if SERVICE is present in systemd and ACTION is valid systemctl command
+# returns false if systemd is disabled or not active
+is_systemd_service() {
+ local SERVICE=$1 ACTION=$2
+
+ [ "$USE_SYSTEMD" = "no" ] && return 1
+
+ # if we are called from systemd itself, because some .service specified
+ # invocation via /sbin/service. this avoids loops
+ # detect this via CMDLINE var, which has leaked from geninitrd
+ if [ -n "$CMDLINE" ]; then
+ echo >&2 "Warning: CMDLINE env set, likely you are defining .service to use /sbin/service, please use /etc/rc.d/init.d/<SERVICE> instead"
+ return 1
+ fi
+
+ case "$ACTION" in
+ # list obtained as: man systemctl | grep N.*A.*M.*E
+ start | \
+ stop | \
+ reload | \
+ restart | \
+ try-restart | \
+ reload-or-restart | \
+ reload-or-try-restart | \
+ isolate | \
+ kill | \
+ is-active | \
+ status | \
+ show | \
+ reset-failed | \
+ enable | \
+ disable | \
+ is-enabled | \
+ reenable | \
+ preset | \
+ mask | \
+ unmask | \
+ link | \
+ load | \
+ snapshot | \
+ delete | \
+ set-environment | \
+ unset-environment )
+ ;;
+ *)
+ #echo "Not valid systemd command"
+ return 1
+ esac
+
+ [ -x /bin/systemd_booted ] || return 1
+ /bin/systemd_booted || return 1
+
+ /bin/systemctl show "$SERVICE".service | grep -q LoadError= && return 1 || return 0
+}
+
+status_all() {
+ local SERVICE TYPE has_systemd
+
+ if [ "$USE_SYSTEMD" != "no" ] && [ -x /bin/systemd_booted ] && /bin/systemd_booted; then
+ has_systemd=1
+ else
+ unset has_systemd
+ fi
+
+ cd ${SERVICEDIR}
+ for SERVICE in *; do
+ case "${SERVICE}" in
+ functions | halt | killall | single| linuxconf| kudzu)
+ ;;
+ *)
+ if ! is_ignored_file "${SERVICE}" \
+ && [ -x "${SERVICEDIR}/${SERVICE}" ]; then
+ if [ "$has_systemd" ] && [ -f /lib/systemd/system/${SERVICE}.service ]; then
+ # D for SystemD
+ TYPE='D'
+ else
+ # S for SysVinit
+ TYPE='S'
+ fi
+ if ! grep -qs "\Wstatus)" "$SERVICE"; then
+ printf " %s %-60s %s\n" "$TYPE:[?]" "$SERVICE:" "unknown"
+ continue
+ else
+ out=$(env -i LANG="$LANG" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" status 2>&1)
+ if [ "$?" = "0" -a -n "$out" ]; then
+ printf " %s %-60s %s\n" "$TYPE:[+]" "$SERVICE:" "running"
+ continue
+ else
+ printf " %s %-60s %s %s\n" "$TYPE:[-]" "$SERVICE:" "NOT running"
+ continue
+ fi
+ fi
+ fi
+ ;;
+ esac
+ done
+}
+
+VERSION="$(basename $0) ver. 0.91-pld"
+USAGE="Usage: $(basename $0) < option > | --status-all | \
+[ service_name [ command | --full-restart ] ]"
+
+SERVICE=
+USE_SYSTEMD=
+
+if [ -d /etc/rc.d/init.d ]; then
+ SERVICEDIR="/etc/rc.d/init.d"
+else
+ SERVICEDIR="/etc/init.d"
+fi
+
+if [ $# -eq 0 ]; then
+ echo "${USAGE}" >&2
+ exit 1
+fi
+
+cd /
+while [ $# -gt 0 ]; do
+ case "${1}" in
+ --help | -h | --h* )
+ echo "${USAGE}" >&2
+ exit 0
+ ;;
+ --version | -V )
+ echo "${VERSION}" >&2
+ exit 0
+ ;;
+ --ignore-dependencies)
+ export SYSTEMCTL_IGNORE_DEPENDENCIES=1
+ shift
+ ;;
+ --skip-redirect)
+ export SYSTEMCTL_SKIP_REDIRECT=1
+ shift
+ ;;
+ --no-systemd)
+ USE_SYSTEMD=no
+ shift
+ ;;
+ *)
+ if [ -z "${SERVICE}" -a $# -eq 1 -a "${1}" = "--status-all" ]; then
+ status_all
+ exit 0
+ elif [ $# -eq 2 -a "${2}" = "--full-restart" ]; then
+ SERVICE="${1}"
+ if [ -x "${SERVICEDIR}/${SERVICE}" ]; then
+ env -i LANG=$LANG PATH=$PATH TERM=$TERM "${SERVICEDIR}/${SERVICE}" stop
+ env -i LANG=$LANG PATH=$PATH TERM=$TERM "${SERVICEDIR}/${SERVICE}" start
+ exit $?
+ fi
+ elif [ -z "${SERVICE}" ]; then
+ SERVICE="${1}"
+ elif [ -z "${ACTION}" ]; then
+ ACTION="${1}"
+ else
+ OPTIONS="${OPTIONS} ${1}"
+ fi
+ shift
+ ;;
+ esac
+done
+
+if is_systemd_service "${SERVICE}" "${ACTION}"; then
+ echo >&2 "Redirecting to /bin/systemctl --output=cat ${ACTION} ${SERVICE}.service ${OPTIONS}"
+ exec /bin/systemctl --output=cat ${ACTION} ${SERVICE}.service ${OPTIONS}
+elif [ -x "${SERVICEDIR}/${SERVICE}" ]; then
+ exec env -i LANG=$LANG PATH=$PATH TERM=$TERM "${SERVICEDIR}/${SERVICE}" ${ACTION} ${OPTIONS}
+else
+ echo "${SERVICE}: unrecognized service" >&2
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+#
+#
+
+[ -f /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
+[ -f /etc/sysconfig/console ] && . /etc/sysconfig/console
+
+[ -n "$SYSFONT" ] && CONSOLEFONT="$SYSFONT"
+
+
+charmap=
+# /usr might not be mounted
+if [ -x /usr/bin/locale ]; then
+ charmap=$(LANG="$LANG" locale charmap)
+fi
+
+if [ "$charmap" = "UTF-8" ]; then
+ if [ -x /bin/unicode_start ] && /sbin/consoletype fg; then
+ exec unicode_start $CONSOLEFONT $CONSOLEMAP
+ fi
+elif [ -x /bin/unicode_stop ] && /sbin/consoletype fg; then
+ unicode_stop
+fi
+
+# console-tools, obsolete part
+if [ -x /usr/bin/consolechars -o -x /bin/consolechars ]; then
+ if [ -n "$CONSOLEFONT" ]; then
+ consolechars --acm ${CONSOLEMAP:-trivial.trans} --font $CONSOLEFONT
+ fi
+ if [ -n "$KEYTABLE" ]; then
+ loadkeys $KEYTABLE < /dev/tty0 > /dev/tty0
+ fi
+# kbd, currently used
+elif [ -x /usr/bin/setfont -o -x /bin/setfont ]; then
+ if [ -n "$CONSOLESCREENFONTMAP" ]; then
+ ARGS="-u $CONSOLESCREENFONTMAP"
+ fi
+ if [ -n "$CONSOLEMAP" ]; then
+ if [ ! -f /lib/kbd/consoletrans/${CONSOLEMAP}_to_uni.trans ]; then
+ CONSOLEMAP=$(echo "$CONSOLEMAP" | awk '{ gsub(/iso[0]?/,"8859-"); print $0; }')
+ fi
+ ARGS="$ARGS -m $CONSOLEMAP"
+ fi
+ if [ -n "$CONSOLEFONT" ]; then
+ setfont $CONSOLEFONT $ARGS
+ else
+ echo -ne "\033(K" 2>/dev/null > /proc/$$/fd/0
+ fi
+fi
+
+exit 0
--- /dev/null
+@SET_MAKE@
+
+DEFS = @DEFS@ -D_GNU_SOURCE=1 -DSBINDIR=\""@sbindir@"\"
+
+sysconf_DATA = \
+ initlog.conf
+
+bin_PROGRAMS = \
+ doexec \
+ ipcalc \
+ usleep \
+ run-parts \
+ resolvesymlink
+
+sbin_PROGRAMS = \
+ consoletype \
+ genhostid \
+ getkey \
+ initlog \
+ loglevel \
+ minilogd \
+ netreport \
+ ppp-watch \
+ start-stop-daemon \
+ setuidgid \
+ usernetctl
+
+EXTRA_PROGRAMS = \
+ testd
+
+EXTRA_DIST = $(sysconf_DATA)
+
+doexec_SOURCES = doexec.c
+
+resolvesymlink_SOURCES = resolvesymlink.c
+
+ipcalc_SOURCES = ipcalc.c
+ipcalc_LDADD = -lpopt
+
+genhostid_SOURCES = genhostid.c
+
+netreport_SOURCES = netreport.c
+
+testd_SOURCES = testd.c
+
+usernetctl_SOURCES = usernetctl.c
+
+usleep_SOURCES = usleep.c
+
+loglevel_SOURCES = loglevel.c
+
+initlog_SOURCES = initlog.c initlog.h process.c process.h
+initlog_LDADD = -lpopt
+
+getkey_SOURCES = getkey.c
+getkey_LDADD = -lpopt
+
+ppp_watch_SOURCES = ppp-watch.c shvar.c shvar.h
+ppp_watch_LDADD = $(GLIB_LIBS)
+AM_CPPFLAGS = $(GLIB_CFLAGS)
+
+consoletype_SOURCES = consoletype.c
+
+start_stop_daemon_SOURCES = start-stop-daemon.c
+start_stop_daemon_LDADD = -lcap
+
+setuidgid_SOURCES = setuidgid.c
+
+run_parts_CPPFLAGS = -include config.h
--- /dev/null
+/*
+ * Copyright (c) 1999-2003 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+
+int main(int argc, char **argv)
+{
+ unsigned char twelve = 12;
+ char *type;
+ int maj, min, ret = 0, fg = -1;
+ struct stat sb;
+
+ fstat(0, &sb);
+ maj = major(sb.st_rdev);
+ min = minor(sb.st_rdev);
+ if (maj != 3 && (maj < 136 || maj > 143)) {
+ if ((fg = ioctl (0, TIOCLINUX, &twelve)) < 0) {
+ type = "serial";
+ ret = 1;
+ } else {
+#ifdef __powerpc__
+ int fd;
+ char buf[65536];
+
+ fd = open("/proc/tty/drivers",O_RDONLY);
+ read(fd, buf, 65535);
+ if (strstr(buf,"vioconsole /dev/tty")) {
+ type = "vio";
+ ret = 3;
+ } else {
+ type = "vt";
+ ret = 0;
+ }
+#else
+ type = "vt";
+ ret = 0;
+#endif
+ }
+ } else {
+ type = "pty";
+ ret = 2;
+ }
+ if (argc > 1 && !strcmp(argv[1],"fg")) {
+ if (fg < 0 || fg != (min-1))
+ return 1;
+ return 0;
+ } else {
+ printf("%s\n",type);
+ return ret;
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 1997-1999 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <unistd.h>
+
+int main(int argc, char ** argv) {
+ if (argc<2) return 1;
+ execvp(argv[1], argv + 2);
+ return 1;
+}
--- /dev/null
+/* Copyright (C) 2003 Red Hat, Inc.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <fcntl.h>
+#include <stdlib.h>
+#include <time.h>
+#include <unistd.h>
+#include <sys/stat.h>
+int
+main (void)
+{
+ struct stat st;
+ long int n;
+ if (stat ("/etc/hostid", &st) == 0 && S_ISREG (st.st_mode)
+ && st.st_size >= sizeof (n))
+ return 0;
+ int fd = open ("/dev/random", O_RDONLY);
+ if (fd == -1 || read (fd, &n, sizeof (n)) != sizeof (n))
+ {
+ srand48 ((long int) time (NULL) ^ (long int) getpid ());
+ n = lrand48 ();
+ }
+ return sethostid (n);
+}
--- /dev/null
+/*\r
+ * Copyright (c) 1999-2003, 2006 Red Hat, Inc. All rights reserved.\r
+ *\r
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA\r
+ *
+ * getkey\r
+ *\r
+ * A very simple keygrabber.\r
+ *\r
+ */\r
+#include <ctype.h>\r
+#include <errno.h>\r
+#include <signal.h>\r
+#include <stdlib.h>\r
+#include <stdio.h>\r
+#include <string.h>\r
+#include <termios.h>\r
+#include <unistd.h>\r
+#include <sys/poll.h>\r
+#include "popt.h"\r
+\r
+static struct termios orig_tp;\r
+\r
+static void reset_term(int x) {\r
+ tcsetattr(0,TCSANOW,&orig_tp);\r
+ _exit(x);\r
+}\r
+\r
+int main(int argc, char **argv) {\r
+ static const char default_list[] = "";\r
+\r
+ const char *list;\r
+ char *waitmessage = NULL;\r
+ char *waitprint, *waitsprint;\r
+ int waitseconds=0;\r
+ int alarmlen=0;\r
+ int ignore_control=0;\r
+ struct termios tp;\r
+ int r;\r
+ struct pollfd ufds; /* only one, no need for an array... */\r
+ poptContext context;\r
+ struct poptOption options[] = {\r
+ { "wait", 'c', POPT_ARG_INT, &waitseconds, 0, "Number of seconds to wait for keypress", NULL },\r
+ { "message", 'm', POPT_ARG_STRING, &waitmessage, 0, "Message to print out while waiting for string\nNOTE: The message may have a \"%d\" in it, to hold the number of seconds left to wait.", NULL },\r
+ { "ignore-control-chars", 'i', POPT_ARG_NONE, &ignore_control, 0, "Ignore Control-C and Control-D", NULL },\r
+ POPT_AUTOHELP\r
+ POPT_TABLEEND\r
+ };\r
+\r
+ context = poptGetContext("getkey", argc, (const char **)argv, options,\r
+ POPT_CONTEXT_POSIXMEHARDER);\r
+ poptSetOtherOptionHelp(context, "[keys]");\r
+\r
+ r = poptGetNextOpt(context);\r
+ if (r < -1) {\r
+ fprintf(stderr, "%s: %s\n", \r
+ poptBadOption(context, POPT_BADOPTION_NOALIAS),\r
+ poptStrerror(r));\r
+\r
+ return -1;\r
+ }\r
+ list = poptGetArg(context);\r
+ if (list != NULL) {\r
+ char *p;\r
+\r
+ p = strdup(list);\r
+ list = p;\r
+ while (*p != 0) {\r
+ *p = toupper(*p);\r
+ p++;\r
+ }\r
+ } else\r
+ list = default_list;\r
+ if (waitseconds) {\r
+ if (waitseconds < 0) {\r
+ fprintf(stderr, "--wait: Invalid time %d seconds\n",\r
+ waitseconds);\r
+ return -1;\r
+ }\r
+ alarmlen = waitseconds;\r
+ }\r
+\r
+ tcgetattr(0,&tp);\r
+ orig_tp = tp;\r
+ signal(SIGTERM,reset_term);\r
+ if (alarmlen != 0) {\r
+ signal(SIGALRM,reset_term);\r
+ alarm(alarmlen);\r
+ }\r
+\r
+ tp.c_iflag=0;\r
+ tp.c_oflag &= ~OPOST;\r
+ tp.c_lflag &= ~(ISIG | ICANON);\r
+ tcsetattr(0,TCSANOW,&tp);\r
+\r
+ ufds.events = POLLIN;\r
+ ufds.fd = 0;\r
+\r
+ if (waitmessage) {\r
+ waitprint = alloca (strlen(waitmessage)+15); /* long enough */\r
+ waitprint[0] = '\r';\r
+ waitsprint = waitprint + 1;\r
+ }\r
+\r
+ while (1) {\r
+ if (waitmessage) {\r
+ sprintf (waitsprint, waitmessage, waitseconds);\r
+ write (1, waitprint, strlen(waitprint));\r
+ }\r
+ r = poll(&ufds, 1, alarmlen ? 1000 : -1);\r
+ if (r == 0) {\r
+ /* we have waited a whole second with no keystroke... */\r
+ waitseconds--;\r
+ }\r
+ if (r > 0) {\r
+ char ch;\r
+\r
+ read(0, &ch, sizeof(ch));\r
+ ch = toupper(ch);\r
+ /* Die if we get a control-c or control-d */\r
+ if (ignore_control == 0 && (ch == 3 || ch == 4))\r
+ reset_term(1);\r
+ /* Don't let a null character be interpreted as a match\r
+ by strchr */\r
+ if (ch != 0\r
+ && (strcmp(list, "") == 0 || strchr(list, ch) != NULL))\r
+ reset_term(0);\r
+ }\r
+ }\r
+}\r
--- /dev/null
+/*
+ * Copyright (c) 1999-2003 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libintl.h>
+#include <locale.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define SYSLOG_NAMES
+#include <syslog.h>
+
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/un.h>
+#include <sys/wait.h>
+
+#define _(String) gettext((String))
+
+#include <popt.h>
+
+#include <regex.h>
+
+#include "initlog.h"
+#include "process.h"
+
+static int logfacility=LOG_DAEMON;
+static int logpriority=LOG_NOTICE;
+static int reexec=0;
+static int quiet=0;
+int debug=0;
+
+regex_t **regList = NULL;
+
+static int logEntries = 0;
+struct logInfo *logData = NULL;
+
+void readConfiguration(char *fname) {
+ int fd,num=0;
+ struct stat sbuf;
+ char *data,*line;
+ regex_t *regexp;
+ int lfac=-1,lpri=-1;
+
+ if ((fd=open(fname,O_RDONLY))==-1) return;
+ if (fstat(fd,&sbuf)) {
+ close(fd);
+ return;
+ }
+ data=malloc(sbuf.st_size+1);
+ if (read(fd,data,sbuf.st_size)!=sbuf.st_size) {
+ close(fd);
+ free(data);
+ return;
+ }
+ close(fd);
+ data[sbuf.st_size] = '\0';
+ while ((line=getLine(&data))) {
+ if (line[0]=='#') continue;
+ if (!strncmp(line,"ignore ",7)) {
+ regexp = malloc(sizeof(regex_t));
+ if (!regcomp(regexp,line+7,REG_EXTENDED|REG_NOSUB|REG_NEWLINE)) {
+ regList = realloc(regList,(num+2) * sizeof(regex_t *));
+ regList[num] = regexp;
+ regList[num+1] = NULL;
+ num++;
+ }
+ }
+ if (!strncmp(line,"facility ",9)) {
+ lfac=atoi(line+9);
+ if ((lfac == 0) && strcmp(line+9,"0")) {
+ int x =0;
+
+ lfac = LOG_DAEMON;
+ for (x=0;facilitynames[x].c_name;x++) {
+ if (!strcmp(line+9,facilitynames[x].c_name)) {
+ lfac = facilitynames[x].c_val;
+ break;
+ }
+ }
+ }
+ }
+ if (!strncmp(line,"priority ",9)) {
+ lpri = atoi(line+9);
+ if ((lpri == 0) && strcmp(line+9,"0")) {
+ int x=0;
+
+ lpri = LOG_NOTICE;
+ for (x=0;prioritynames[x].c_name;x++) {
+ if (!strcmp(line+9,prioritynames[x].c_name)) {
+ lpri = prioritynames[x].c_val;
+ break;
+ }
+ }
+ }
+ }
+ }
+ if (lfac!=-1) logfacility=lfac;
+ if (lpri!=-1) logpriority=lpri;
+}
+
+char *getLine(char **data) {
+ /* Get one line from data */
+ /* Anything up to a carraige return (\r) or a backspace (\b) is discarded. */
+ /* If this really bothers you, mail me and I might make it configurable. */
+ /* It's here to avoid confilcts with fsck's progress bar. */
+ char *x, *y;
+
+ if (!*data) return NULL;
+ x=*data;
+ while (*x && (*x != '\n')) {
+ while (*x && (*x != '\n') && (*x != '\r') && (*x != '\b')) x++;
+ if (*x && (*x=='\r' || *x =='\b')) {
+ *data = x+1;
+ x++;
+ }
+ }
+ if (*x) {
+ x++;
+ } else {
+ if (x-*data) {
+ y=malloc(x-*data+1);
+ y[x-*data] = 0;
+ y[x-*data-1] = '\n';
+ memcpy(y,*data,x-*data);
+ } else {
+ y=NULL;
+ }
+ *data = NULL;
+ return y;
+ }
+ y = malloc(x-*data);
+ y[x-*data-1] = 0;
+ memcpy(y,*data,x-*data-1);
+ *data = x;
+ return y;
+}
+
+char **toArray(char *line, int *num) {
+ /* Converts a long string into an array of lines. */
+ char **lines;
+ char *tmpline;
+
+ *num = 0;
+ lines = NULL;
+
+ while ((tmpline=getLine(&line))) {
+ if (!*num)
+ lines = (char **) malloc(sizeof(char *));
+ else
+ lines = (char **) realloc(lines, (*num+1)*sizeof(char *));
+ lines[*num] = tmpline;
+ (*num)++;
+ }
+ return lines;
+}
+
+int startDaemon() {
+ int pid;
+ int rc;
+
+ if ( (pid = fork()) == -1 ) {
+ perror("fork");
+ return -1;
+ }
+ if ( pid ) {
+ /* parent */
+ waitpid(pid,&rc,0);
+ if (WIFEXITED(rc)) {
+ DDEBUG("minilogd returned %d!\n",WEXITSTATUS(rc));
+ return WEXITSTATUS(rc);
+ }
+ else
+ return -1;
+ } else {
+ int fd;
+
+ fd=open("/dev/null",O_RDWR);
+ dup2(fd,0);
+ dup2(fd,1);
+ dup2(fd,2);
+ close(fd);
+ /* kid */
+ execlp("minilogd","minilogd",NULL);
+ perror("exec");
+ exit(-1);
+ }
+}
+
+int trySocket() {
+ int s;
+ struct sockaddr_un addr;
+
+ s = socket(AF_LOCAL, SOCK_DGRAM, 0);
+ if (s<0)
+ return 1;
+
+ bzero(&addr,sizeof(addr));
+ addr.sun_family = AF_LOCAL;
+ strncpy(addr.sun_path,_PATH_LOG,sizeof(addr.sun_path)-1);
+
+ if (connect(s,(struct sockaddr *) &addr,sizeof(addr))<0) {
+ if (errno == EPROTOTYPE || errno == ECONNREFUSED) {
+ DDEBUG("connect failed (EPROTOTYPE), trying stream\n");
+ close(s);
+ s = socket(AF_LOCAL, SOCK_STREAM, 0);
+ if (connect(s,(struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ DDEBUG("connect failed: %s\n",strerror(errno));
+ close(s);
+ return 1;
+ }
+ close(s);
+ return 0;
+ }
+ close(s);
+ DDEBUG("connect failed: %s\n",strerror(errno));
+ return 1;
+ } else {
+ close(s);
+ return 0;
+ }
+}
+
+int logLine(struct logInfo *logEnt) {
+ /* Logs a line... somewhere. */
+ int x;
+ struct stat statbuf;
+
+ /* Don't log empty or null lines */
+ if (!logEnt->line || !strcmp(logEnt->line,"\n")) return 0;
+
+
+ if ( ((stat(_PATH_LOG,&statbuf)==-1) || trySocket())
+ && startDaemon()
+ ) {
+ DDEBUG("starting daemon failed, pooling entry %d\n",logEntries);
+ logData=realloc(logData,(logEntries+1)*sizeof(struct logInfo));
+ logData[logEntries]= (*logEnt);
+ logEntries++;
+ } else {
+ if (logEntries>0) {
+ for (x=0;x<logEntries;x++) {
+ DDEBUG("flushing log entry %d =%s=\n",x,logData[x].line);
+ openlog(logData[x].cmd,0,logData[x].fac);
+ syslog(logData[x].pri,"%s",logData[x].line);
+ closelog();
+ }
+ free(logData);
+ logEntries = 0;
+ }
+ DDEBUG("logging =%s= via syslog\n",logEnt->line);
+ openlog(logEnt->cmd,0,logEnt->fac);
+ syslog(logEnt->pri,"%s",logEnt->line);
+ closelog();
+ }
+ return 0;
+}
+
+int logEvent(char *cmd, int eventtype,char *string) {
+ char *eventtable [] = {
+ _("%s babbles incoherently"),
+ _("%s succeeded"),
+ _("%s failed"),
+ _("%s cancelled at user request"),
+ _("%s failed due to a failed dependency"),
+ /* insert more here */
+ NULL
+ };
+ int x=0,len;
+ struct logInfo logentry;
+
+ if (cmd) {
+ logentry.cmd = strdup(basename(cmd));
+ if ((logentry.cmd[0] =='K' || logentry.cmd[0] == 'S') &&
+ ( logentry.cmd[1] >= '0' && logentry.cmd[1] <= '9' ) &&
+ ( logentry.cmd[2] >= '0' && logentry.cmd[2] <= '9' ) )
+ logentry.cmd+=3;
+ } else
+ logentry.cmd = strdup(_("(none)"));
+ if (!string)
+ string = strdup(cmd);
+
+ while (eventtable[x] && x<eventtype) x++;
+ if (!(eventtable[x])) x=0;
+
+ len=strlen(eventtable[x])+strlen(string);
+ logentry.line=malloc(len);
+ snprintf(logentry.line,len,eventtable[x],string);
+
+ logentry.pri = logpriority;
+ logentry.fac = logfacility;
+
+ return logLine(&logentry);
+}
+
+int logString(char *cmd, char *string) {
+ struct logInfo logentry;
+
+ if (cmd) {
+ logentry.cmd = strdup(basename(cmd));
+ if ((logentry.cmd[0] =='K' || logentry.cmd[0] == 'S') &&
+ ( logentry.cmd[1] >= '0' && logentry.cmd[1] <= 0x39 ) &&
+ ( logentry.cmd[2] >= '0' && logentry.cmd[2] <= 0x39 ) )
+ logentry.cmd+=3;
+ } else
+ logentry.cmd = strdup(_(""));
+ logentry.line = strdup(string);
+ logentry.pri = logpriority;
+ logentry.fac = logfacility;
+
+ return logLine(&logentry);
+}
+
+int processArgs(int argc, char **argv, int silent) {
+ char *cmdname=NULL;
+ char *conffile=NULL;
+ int cmdevent=0;
+ char *cmd=NULL;
+ char *logstring=NULL;
+ char *fac=NULL,*pri=NULL;
+ int lfac=-1, lpri=-1;
+ poptContext context;
+ int rc;
+ struct poptOption optTable[] = {
+ POPT_AUTOHELP
+ { "conf", 0, POPT_ARG_STRING, &conffile, 0,
+ "configuration file (default: /etc/initlog.conf)", NULL
+ },
+ { "name", 'n', POPT_ARG_STRING, &cmdname, 0,
+ "name of service being logged", NULL
+ },
+ { "event", 'e', POPT_ARG_INT, &cmdevent, 0,
+ "event being logged (see man page)", NULL
+ },
+ { "cmd", 'c', POPT_ARG_STRING, &cmd, 0,
+ "command to run, logging output", NULL
+ },
+ { "debug", 'd', POPT_ARG_NONE, &debug, 0,
+ "print lots of verbose debugging info", NULL
+ },
+ { "run", 'r', POPT_ARG_STRING, &cmd, 3,
+ "command to run, accepting input on open fd", NULL
+ },
+ { "string", 's', POPT_ARG_STRING, &logstring, 0,
+ "string to log", NULL
+ },
+ { "facility", 'f', POPT_ARG_STRING, &fac, 1,
+ "facility to log at (default: 'local7')", NULL
+ },
+ { "priority", 'p', POPT_ARG_STRING, &pri, 2,
+ "priority to log at (default: 'notice')", NULL
+ },
+ { "quiet", 'q', POPT_ARG_NONE, &quiet, 0,
+ "suppress stdout/stderr", NULL
+ },
+ { 0, 0, 0, 0, 0, 0 }
+ };
+
+ context = poptGetContext("initlog", argc, argv, optTable, 0);
+
+ while ((rc = poptGetNextOpt(context)) > 0) {
+ switch (rc) {
+ case 1:
+ lfac=atoi(fac);
+ if ((lfac == 0) && strcmp(fac,"0")) {
+ int x =0;
+
+ lfac = LOG_DAEMON;
+ for (x=0;facilitynames[x].c_name;x++) {
+ if (!strcmp(fac,facilitynames[x].c_name)) {
+ lfac = facilitynames[x].c_val;
+ break;
+ }
+ }
+ }
+ break;
+ case 2:
+ lpri = atoi(pri);
+ if ((lpri == 0) && strcmp(pri,"0")) {
+ int x=0;
+
+ lpri = LOG_NOTICE;
+ for (x=0;prioritynames[x].c_name;x++) {
+ if (!strcmp(pri,prioritynames[x].c_name)) {
+ lpri = prioritynames[x].c_val;
+ break;
+ }
+ }
+ }
+ break;
+ case 3:
+ reexec = 1;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if ((rc < -1)) {
+ if (!silent)
+ fprintf(stderr, "%s: %s\n",
+ poptBadOption(context, POPT_BADOPTION_NOALIAS),
+ poptStrerror(rc));
+
+ return -1;
+ }
+ if ( (cmd && logstring) || (cmd && cmdname) ) {
+ if (!silent)
+ fprintf(stderr, _("--cmd and --run are incompatible with --string or --name\n"));
+ return -1;
+ }
+ if ( cmdname && (!logstring && !cmdevent)) {
+ if (!silent)
+ fprintf(stderr, _("--name requires one of --event or --string\n"));
+ return -1;
+ }
+ if (cmdevent && cmd) {
+ if (!silent)
+ fprintf(stderr, _("--cmd and --run are incompatible with --event\n"));
+ return -1;
+ }
+ if (conffile) {
+ readConfiguration(conffile);
+ } else {
+ readConfiguration("/etc/initlog.conf");
+ }
+ if (cmd) {
+ while (isspace(*cmd)) cmd++;
+ }
+ if (lpri!=-1) logpriority=lpri;
+ if (lfac!=-1) logfacility=lfac;
+ if (cmdevent) {
+ logEvent(cmdname,cmdevent,logstring);
+ } else if (logstring) {
+ logString(cmdname,logstring);
+ } else if ( cmd && *cmd) {
+ return(runCommand(cmd,reexec,quiet,debug));
+ } else {
+ if (!silent)
+ fprintf(stderr,"nothing to do!\n");
+ return -1;
+ }
+ return 0;
+}
+
+int main(int argc, char **argv) {
+
+ setlocale(LC_ALL,"");
+ bindtextdomain("initlog","/etc/locale");
+ textdomain("initlog");
+ exit(processArgs(argc,argv,0));
+}
--- /dev/null
+# /etc/initlog.conf
+#
+# initlog configuration file
+#
+# lines preceded by a '#' are comments
+#
+# anything not recognized is ignored. :)
+
+# This sets the default logging facility. (can override with command line arguments)
+facility local7
+
+# This sets the default logging priority. (can override with command line arguments)
+priority notice
+
+# ignore foo
+# means to discard any output lines that match the regular expression foo
+
+# This regexp is useful if you use fsck's -C option.
+ignore [^:]+: \|[=]+
+# This regexp is useful for fsck's feature of setting file types
+ignore [^:]+: Setting filetype
+# This regexp is useful for quotacheck
+ignore ^[-\\\|\/]$
--- /dev/null
+
+#define _GNU_SOURCE 1
+
+#ifndef INITLOG_H
+#define INITLOG_H
+
+struct logInfo {
+ char *cmd;
+ char *line;
+ int fac;
+ int pri;
+};
+
+char *getLine(char **data);
+int logString(char *cmd, char *string);
+int processArgs(int argc, char **argv, int silent);
+
+#define DDEBUG if (debug) printf
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 1997-2003 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Authors:
+ * Erik Troan <ewt@redhat.com>
+ * Preston Brown <pbrown@redhat.com>
+ */
+
+
+#include <ctype.h>
+#include <popt.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+
+/*!
+ \def IPBITS
+ \brief the number of bits in an IP address.
+*/
+#define IPBITS (sizeof(u_int32_t) * 8)
+/*!
+ \def IPBYTES
+ \brief the number of bytes in an IP address.
+*/
+#define IPBYTES (sizeof(u_int32_t))
+
+
+/*!
+ \file ipcalc.c
+ \brief provides utilities for manipulating IP addresses.
+
+ ipcalc provides utilities and a front-end command line interface for
+ manipulating IP addresses, and calculating various aspects of an ip
+ address/netmask/network address/prefix/etc.
+
+ Functionality can be accessed from other languages from the library
+ interface, documented here. To use ipcalc from the shell, read the
+ ipcalc(1) manual page.
+
+ When passing parameters to the various functions, take note of whether they
+ take host byte order or network byte order. Most take host byte order, and
+ return host byte order, but there are some exceptions.
+
+*/
+
+/*!
+ \fn u_int32_t prefix2mask(int bits)
+ \brief creates a netmask from a specified number of bits
+
+ This function converts a prefix length to a netmask. As CIDR (classless
+ internet domain internet domain routing) has taken off, more an more IP
+ addresses are being specified in the format address/prefix
+ (i.e. 192.168.2.3/24, with a corresponding netmask 255.255.255.0). If you
+ need to see what netmask corresponds to the prefix part of the address, this
+ is the function. See also \ref mask2prefix.
+
+ \param prefix is the number of bits to create a mask for.
+ \return a network mask, in network byte order.
+*/
+u_int32_t prefix2mask(int prefix) {
+ return htonl(~((1 << (32 - prefix)) - 1));
+}
+
+/*!
+ \fn int mask2prefix(u_int32_t mask)
+ \brief calculates the number of bits masked off by a netmask.
+
+ This function calculates the significant bits in an IP address as specified by
+ a netmask. See also \ref prefix2mask.
+
+ \param mask is the netmask, specified as an u_int32_teger in network byte order.
+ \return the number of significant bits. */
+int mask2prefix(u_int32_t mask)
+{
+ int i;
+ int count = IPBITS;
+
+ for (i = 0; i < IPBITS; i++) {
+ if (!(ntohl(mask) & ((2 << i) - 1)))
+ count--;
+ }
+
+ return count;
+}
+
+/*!
+ \fn u_int32_t default_netmask(u_int32_t addr)
+
+ \brief returns the default (canonical) netmask associated with specified IP
+ address.
+
+ When the Internet was originally set up, various ranges of IP addresses were
+ segmented into three network classes: A, B, and C. This function will return
+ a netmask that is associated with the IP address specified defining where it
+ falls in the predefined classes.
+
+ \param addr an IP address in network byte order.
+ \return a netmask in network byte order. */
+u_int32_t default_netmask(u_int32_t addr)
+{
+ if (((ntohl(addr) & 0xFF000000) >> 24) <= 127)
+ return htonl(0xFF000000);
+ else if (((ntohl(addr) & 0xFF000000) >> 24) <= 191)
+ return htonl(0xFFFF0000);
+ else
+ return htonl(0xFFFFFF00);
+}
+
+/*!
+ \fn u_int32_t calc_broadcast(u_int32_t addr, int prefix)
+
+ \brief calculate broadcast address given an IP address and a prefix length.
+
+ \param addr an IP address in network byte order.
+ \param prefix a prefix length.
+
+ \return the calculated broadcast address for the network, in network byte
+ order.
+*/
+u_int32_t calc_broadcast(u_int32_t addr,
+ int prefix)
+{
+ return (addr & prefix2mask(prefix)) | ~prefix2mask(prefix);
+}
+
+/*!
+ \fn u_int32_t calc_network(u_int32_t addr, int prefix)
+ \brief calculates the network address for a specified address and prefix.
+
+ \param addr an IP address, in network byte order
+ \param prefix the network prefix
+ \return the base address of the network that addr is associated with, in
+ network byte order.
+*/
+u_int32_t calc_network(u_int32_t addr, int prefix)
+{
+ return (addr & prefix2mask(prefix));
+}
+
+/*!
+ \fn const char *get_hostname(u_int32_t addr)
+ \brief returns the hostname associated with the specified IP address
+
+ \param addr an IP address to find a hostname for, in network byte order
+
+ \return a hostname, or NULL if one cannot be determined. Hostname is stored
+ in a static buffer that may disappear at any time, the caller should copy the
+ data if it needs permanent storage.
+*/
+const char *get_hostname(u_int32_t addr)
+{
+ struct hostent * hostinfo;
+ int x;
+
+ hostinfo = gethostbyaddr((char *) &addr, sizeof(addr), AF_INET);
+ if (!hostinfo)
+ return NULL;
+
+ for (x=0; hostinfo->h_name[x]; x++) {
+ hostinfo->h_name[x] = tolower(hostinfo->h_name[x]);
+ }
+ return hostinfo->h_name;
+}
+
+/*!
+ \fn main(int argc, const char **argv)
+ \brief wrapper program for ipcalc functions.
+
+ This is a wrapper program for the functions that the ipcalc library provides.
+ It can be used from shell scripts or directly from the command line.
+
+ For more information, please see the ipcalc(1) man page.
+*/
+int main(int argc, const char **argv) {
+ int showBroadcast = 0, showPrefix = 0, showNetwork = 0;
+ int showHostname = 0, showNetmask = 0;
+ int beSilent = 0;
+ int rc;
+ poptContext optCon;
+ char *ipStr, *prefixStr, *netmaskStr, *hostName, *chptr;
+ struct in_addr ip, netmask, network, broadcast;
+ int prefix = 0;
+ char errBuf[250];
+ struct poptOption optionsTable[] = {
+ { "broadcast", 'b', 0, &showBroadcast, 0,
+ "Display calculated broadcast address", },
+ { "hostname", 'h', 0, &showHostname, 0,
+ "Show hostname determined via DNS" },
+ { "netmask", 'm', 0, &showNetmask, 0,
+ "Display default netmask for IP (class A, B, or C)" },
+ { "network", 'n', 0, &showNetwork, 0,
+ "Display network address", },
+ { "prefix", 'p', 0, &showPrefix, 0,
+ "Display network prefix", },
+ { "silent", 's', 0, &beSilent, 0,
+ "Don't ever display error messages " },
+ POPT_AUTOHELP
+ { NULL, '\0', 0, 0, 0, NULL, NULL }
+ };
+
+ optCon = poptGetContext("ipcalc", argc, argv, optionsTable, 0);
+ poptReadDefaultConfig(optCon, 1);
+
+ if ((rc = poptGetNextOpt(optCon)) < -1) {
+ if (!beSilent) {
+ fprintf(stderr, "ipcalc: bad argument %s: %s\n",
+ poptBadOption(optCon, POPT_BADOPTION_NOALIAS),
+ poptStrerror(rc));
+ poptPrintHelp(optCon, stderr, 0);
+ }
+ return 1;
+ }
+
+ if (!(ipStr = (char *) poptGetArg(optCon))) {
+ if (!beSilent) {
+ fprintf(stderr, "ipcalc: ip address expected\n");
+ poptPrintHelp(optCon, stderr, 0);
+ }
+ return 1;
+ }
+
+ if (strchr(ipStr,'/') != NULL) {
+ prefixStr = strchr(ipStr, '/') + 1;
+ prefixStr--;
+ *prefixStr = '\0'; /* fix up ipStr */
+ prefixStr++;
+ } else
+ prefixStr = NULL;
+
+ if (prefixStr != NULL) {
+ prefix = atoi(prefixStr);
+ if (prefix == 0) {
+ if (!beSilent)
+ fprintf(stderr, "ipcalc: bad prefix: %s\n",
+ prefixStr);
+ return 1;
+ }
+ }
+
+ if (showBroadcast || showNetwork || showPrefix) {
+ if (!(netmaskStr = (char *) poptGetArg(optCon)) &&
+ (prefix == 0)) {
+ if (!beSilent) {
+ fprintf(stderr, "ipcalc: netmask or prefix expected\n");
+ poptPrintHelp(optCon, stderr, 0);
+ }
+ return 1;
+ } else if (netmaskStr && prefix != 0) {
+ if (!beSilent) {
+ fprintf(stderr, "ipcalc: both netmask and prefix specified\n");
+ poptPrintHelp(optCon, stderr, 0);
+ }
+ return 1;
+ } else if (netmaskStr) {
+ if (!inet_aton(netmaskStr, &netmask)) {
+ if (!beSilent)
+ fprintf(stderr, "ipcalc: bad netmask: %s\n",
+ netmaskStr);
+ return 1;
+ }
+ prefix = mask2prefix(netmask.s_addr);
+ }
+ }
+
+ if ((chptr = (char *) poptGetArg(optCon))) {
+ if (!beSilent) {
+ fprintf(stderr, "ipcalc: unexpected argument: %s\n", chptr);
+ poptPrintHelp(optCon, stderr, 0);
+ }
+ return 1;
+ }
+
+ /* Handle CIDR entries such as 172/8 */
+ if (prefix) {
+ char *tmp = ipStr;
+ int i;
+
+ for(i=3; i> 0; i--) {
+ tmp = strchr(tmp,'.');
+ if (!tmp)
+ break;
+ else
+ tmp++;
+ }
+ tmp = NULL;
+ for (; i>0; i--) {
+ tmp = malloc(strlen(ipStr) + 3);
+ sprintf(tmp,"%s.0",ipStr);
+ ipStr = tmp;
+ }
+ }
+
+ if (!inet_aton(ipStr, (struct in_addr *) &ip)) {
+ if (!beSilent)
+ fprintf(stderr, "ipcalc: bad ip address: %s\n", ipStr);
+ return 1;
+ }
+
+
+ if (!(showNetmask|showPrefix|showBroadcast|showNetwork|showHostname)) {
+ poptPrintHelp(optCon, stderr, 0);
+ return 1;
+ }
+
+ poptFreeContext(optCon);
+
+ /* we know what we want to display now, so display it. */
+
+ if (showNetmask) {
+ if (prefix) {
+ netmask.s_addr = prefix2mask(prefix);
+ } else {
+ netmask.s_addr = default_netmask(ip.s_addr);
+ prefix = mask2prefix(netmask.s_addr);
+ }
+
+ printf("NETMASK=%s\n", inet_ntoa(netmask));
+ }
+
+ if (showPrefix) {
+ if (!prefix)
+ prefix = mask2prefix(ip.s_addr);
+ printf("PREFIX=%d\n", prefix);
+ }
+
+ if (showBroadcast) {
+ broadcast.s_addr = calc_broadcast(ip.s_addr, prefix);
+ printf("BROADCAST=%s\n", inet_ntoa(broadcast));
+ }
+
+ if (showNetwork) {
+ network.s_addr = calc_network(ip.s_addr, prefix);
+ printf("NETWORK=%s\n", inet_ntoa(network));
+ }
+
+ if (showHostname) {
+ if ((hostName = (char *) get_hostname(ip.s_addr)) == NULL) {
+ if (!beSilent) {
+ sprintf(errBuf, "ipcalc: cannot find hostname for %s", ipStr);
+ herror(errBuf);
+ }
+ return 1;
+ }
+
+ printf("HOSTNAME=%s\n", hostName);
+ }
+
+ return 0;
+}
--- /dev/null
+
+/* Change the default console loglevel */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <linux/unistd.h>
+#include <sys/syscall.h>
+
+int main(int argc, char **argv) {
+ int level;
+
+ if (!argv[1]) exit(0);
+ level=atoi(argv[1]);
+ if ( (level<1) || (level>8) ) {
+ fprintf(stderr,"invalid log level %d\n",level);
+ exit(-1);
+ }
+ if (!syscall(SYS_syslog,8,NULL,level)) {
+ exit(0);
+ } else {
+ perror("syslog");
+ exit(-1);
+ }
+}
--- /dev/null
+/* minilogd.c
+ *
+ * A pale imitation of syslogd. Most notably, doesn't write anything
+ * anywhere except possibly back to syslogd.
+ *
+ * Copyright (c) 1999-2001 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <syslog.h>
+#include <unistd.h>
+
+#include <sys/poll.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/un.h>
+
+static int we_own_log=0;
+static char **buffer=NULL;
+static int buflines=0;
+
+int debug;
+
+int recvsock;
+
+void alarm_handler(int x) {
+ alarm(0);
+ close(recvsock);
+ recvsock = -1;
+}
+
+void freeBuffer() {
+ struct sockaddr_un addr;
+ int sock;
+ int x=0,conn;
+
+ bzero(&addr,sizeof(addr));
+ addr.sun_family = AF_LOCAL;
+ strncpy(addr.sun_path,_PATH_LOG,sizeof(addr.sun_path)-1);
+ /* wait for klogd to hit syslog */
+ sleep(2);
+ sock = socket(AF_LOCAL, SOCK_DGRAM,0);
+ conn=connect(sock,(struct sockaddr *) &addr,sizeof(addr));
+ while (x<buflines) {
+ if (!conn) write(sock,buffer[x],strlen(buffer[x])+1);
+ free(buffer[x]);
+ x++;
+ }
+}
+
+void cleanup(int exitcode) {
+ /* If we own the log, unlink it before trying to free our buffer.
+ * Otherwise, sending the buffer to /dev/log doesn't make much sense.... */
+ if (we_own_log) {
+ perror("wol");
+ unlink(_PATH_LOG);
+ }
+ /* Don't try to free buffer if we were called from a signal handler */
+ if (exitcode<=0) {
+ if (buffer) freeBuffer();
+ exit(exitcode);
+ } else
+ exit(exitcode+128);
+}
+
+void runDaemon(int sock) {
+ struct sockaddr_un addr;
+ int x,len,done=0;
+ int addrlen = sizeof(struct sockaddr_un);
+ char *message;
+ struct stat s1,s2;
+ struct pollfd pfds;
+
+ daemon(0,-1);
+ /* try not to leave stale sockets lying around */
+ /* Hopefully, we won't actually get any of these */
+ signal(SIGHUP,cleanup);
+ signal(SIGINT,cleanup);
+ signal(SIGQUIT,cleanup);
+ signal(SIGILL,cleanup);
+ signal(SIGABRT,cleanup);
+ signal(SIGFPE,cleanup);
+ signal(SIGSEGV,cleanup);
+ signal(SIGPIPE,cleanup);
+ signal(SIGBUS,cleanup);
+ signal(SIGTERM,cleanup);
+ done = 0;
+ /* Get stat info on /dev/log so we can later check to make sure we
+ * still own it... */
+ if (stat(_PATH_LOG,&s1) != 0)
+ memset(&s1, '\0', sizeof(struct stat));
+ while (!done) {
+ pfds.fd = sock;
+ pfds.events = POLLIN|POLLPRI;
+ if ( ( (x=poll(&pfds,1,500))==-1) && errno !=EINTR) {
+ perror("poll");
+ cleanup(-1);
+ }
+ if ( (x>0) && pfds.revents & (POLLIN | POLLPRI)) {
+ message = calloc(8192,sizeof(char));
+ addrlen = sizeof(struct sockaddr_un);
+ recvsock = accept(sock,(struct sockaddr *) &addr, &addrlen);
+ if (recvsock == -1)
+ continue;
+ alarm(2);
+ signal(SIGALRM, alarm_handler);
+ len = recv(recvsock,message,8192,0);
+ alarm(0);
+ close(recvsock);
+ if (len>0) {
+ if (buflines < 200000) {
+ if (buffer)
+ buffer = realloc(buffer,(buflines+1)*sizeof(char *));
+ else
+ buffer = malloc(sizeof(char *));
+ message[strlen(message)]='\n';
+ buffer[buflines]=message;
+ buflines++;
+ }
+ }
+ else {
+ recvsock=-1;
+ }
+ }
+ if ( (x>0) && ( pfds.revents & (POLLHUP | POLLNVAL)) )
+ done = 1;
+ /* Check to see if syslogd's yanked our socket out from under us */
+ if ( (stat(_PATH_LOG,&s2)!=0) ||
+ (s1.st_ino != s2.st_ino ) || (s1.st_ctime != s2.st_ctime) ||
+ (s1.st_mtime != s2.st_mtime) ) {
+ done = 1;
+ we_own_log = 0;
+ }
+ }
+ cleanup(0);
+}
+
+int main(int argc, char **argv) {
+ struct sockaddr_un addr;
+ int sock;
+ int pid;
+
+ /* option processing made simple... */
+ if (argc>1) debug=1;
+ /* just in case */
+ sock = open("/dev/null",O_RDWR);
+ dup2(sock,0);
+ dup2(sock,1);
+ dup2(sock,2);
+ close(sock);
+
+ bzero(&addr, sizeof(addr));
+ addr.sun_family = AF_LOCAL;
+ strncpy(addr.sun_path,_PATH_LOG,sizeof(addr.sun_path)-1);
+ sock = socket(AF_LOCAL, SOCK_STREAM,0);
+ unlink(_PATH_LOG);
+ /* Bind socket before forking, so we know if the server started */
+ if (!bind(sock,(struct sockaddr *) &addr, sizeof(addr))) {
+ we_own_log = 1;
+ listen(sock,5);
+ if ((pid=fork())==-1) {
+ perror("fork");
+ exit(3);
+ }
+ if (pid) {
+ exit(0);
+ } else {
+ runDaemon(sock);
+ /* shouldn't get back here... */
+ exit(4);
+ }
+ } else {
+ exit(5);
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 1997-2002 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+/* this will be running setgid root, so be careful! */
+
+static void
+usage(void) {
+ fprintf(stderr, "usage: netreport [-r]\n");
+ exit(1);
+}
+
+#define ADD 1
+#define DEL 0
+int main(int argc, char ** argv) {
+ int action = ADD;
+ /* more than long enough for "/var/run/netreport/<pid>\0" */
+ char netreport_name[64];
+ int netreport_file;
+
+ if (argc > 2) {
+ usage();
+ }
+
+ if (argc > 1) {
+ if (argc == 2 && strcmp(argv[1], "-r") == 0) {
+ action = DEL;
+ } else {
+ usage();
+ }
+ }
+
+ snprintf(netreport_name, sizeof(netreport_name),
+ "/var/run/netreport/%d", getppid());
+ if (action == ADD) {
+ netreport_file = open(netreport_name,
+ O_EXCL|O_CREAT|O_WRONLY|O_TRUNC|O_NOFOLLOW, 0);
+ if (netreport_file == -1) {
+ if (errno != EEXIST) {
+ perror("Could not create netreport file");
+ exit (1);
+ }
+ } else {
+ close(netreport_file);
+ }
+ } else {
+ /* ignore errors; not much we can do, won't hurt anything */
+ unlink(netreport_name);
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * ppp-watch.c
+ *
+ * Bring up a PPP connection and Do The Right Thing[tm] to make bringing
+ * the connection up or down with ifup and ifdown syncronous. Takes
+ * one argument: the logical name of the device to bring up. Does not
+ * detach until the interface is up or has permanently failed to come up.
+ *
+ * Copyright 1999-2003 Red Hat, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* Algorithm:
+ * fork
+ * if child:
+ * Register with netreport. (now exit implies deregister first)
+ * fork/exec ifup-ppp daemon <interface>
+ * else:
+ * while (1):
+ * sigsuspend()
+ * if SIGTERM or SIGINT:
+ * kill pppd pgrp
+ * exit
+ * if SIGHUP:
+ * reload ifcfg files
+ * kill pppd pgrp
+ * wait for SIGCHLD to redial
+ * if SIGIO:
+ * if no physical device found: continue
+ * elif physical device is down:
+ * wait for pppd to exit to redial if appropriate
+ * else: (physical device is up)
+ * detach; continue
+ * if SIGCHLD: (pppd exited)
+ * wait()
+ * if pppd exited:
+ * if PERSIST: redial
+ * else: exit
+ * else: (pppd was killed)
+ * exit
+ *
+ *
+ * When ppp-watch itself dies for reasons of its own, it uses a return code
+ * higher than 25 so as not to clash with pppd return codes, which, as of
+ * this writing, range from 0 to 19.
+ */
+
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/resource.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <termios.h>
+#include <net/if.h>
+#include <glib.h>
+#include "shvar.h"
+
+#define IFCFGPREFIX "/etc/sysconfig/interfaces/ifcfg-"
+#define IFUP_PPP "/lib/rc-scripts/ifup-ppp"
+
+static int theSigterm = 0;
+static int theSigint = 0;
+static int theSighup = 0;
+static int theSigio = 0;
+static int theSigchld = 0;
+static int theSigalrm = 0;
+static int pipeArray[2];
+
+// patch to respect the maxfail parameter to ppp
+// Scott Sharkey <ssharkey@linux-no-limits.com>
+static int dialCount = 0;
+static int theChild;
+static void failureExit(int exitCode);
+
+static void
+interrupt_child(int signo) {
+ kill(theChild, SIGINT);
+}
+
+static void
+set_signal(int signo, void (*handler)(int)) {
+ struct sigaction act;
+ act.sa_handler = handler;
+ act.sa_flags = SA_RESTART;
+ sigemptyset(&act.sa_mask);
+ sigaction(signo, &act, NULL);
+}
+
+/* Create a pipe, and fork off a child. This is the end of the road for
+ * the parent, which will wait for an exit status byte on the pipe (which
+ * is written by the child). */
+static void
+detach(char *device) {
+ pid_t childpid;
+ unsigned char exitCode;
+ int fd;
+
+ if (pipe(pipeArray) == -1)
+ exit(25);
+
+ childpid = fork();
+ if (childpid == -1)
+ exit(26);
+
+ if (childpid != 0) {
+ /* The parent only cares about notifications from the child. */
+ close (pipeArray[1]);
+
+ /* Certain signals are meant for our child, the watcher process. */
+ theChild = childpid;
+ set_signal(SIGINT, interrupt_child);
+ set_signal(SIGTERM, interrupt_child);
+ set_signal(SIGHUP, interrupt_child);
+
+ /* Read the pipe until the child gives us an exit code as a byte. */
+ while (read (pipeArray[0], &exitCode, 1) == -1) {
+ switch (errno) {
+ case EINTR: continue;
+ default: exit (27); /* this will catch EIO in particular */
+ }
+ }
+ switch (exitCode) {
+ case 0:
+ break;
+ case 33:
+ fprintf(stderr, "%s already up, initiating redial\n", device);
+ break;
+ case 34:
+ fprintf(stderr, "Failed to activate %s, retrying in the background\n", device);
+ break;
+ default:
+ fprintf(stderr, "Failed to activate %s with error %d\n", device, exitCode);
+ break;
+ }
+ exit(exitCode);
+ }
+
+ /* We're in the child process, which only writes the exit status
+ * of the pppd process to its parent (i.e., it reads nothing). */
+ close (pipeArray[0]);
+
+ /* Don't leak this into programs we call. */
+ fcntl(pipeArray[1], F_SETFD, FD_CLOEXEC);
+
+ /* Redirect stdio to /dev/null. */
+ fd = open("/dev/null", O_RDONLY);
+ dup2(fd, STDIN_FILENO);
+ close(fd);
+
+ fd = open("/dev/null", O_WRONLY);
+ dup2(fd, STDOUT_FILENO);
+ dup2(fd, STDERR_FILENO);
+ close(fd);
+
+ /* Become session and process group leader. */
+ setsid();
+ setpgid(0, 0);
+}
+
+/* Do magic with the pid file (/var/run/pppwatch-$DEVICE.pid):
+ * Try to open it for writing. If it exists, send a SIGHUP to whatever PID
+ * is already listed in it and remove it. Repeat until we can open it.
+ * Write out our PID, and return. */
+static void
+doPidFile(char *device) {
+ static char pidFilePath[PATH_MAX] = "";
+ int fd = -1;
+ FILE *f = NULL;
+ pid_t pid = 0;
+
+ if (device == NULL) {
+ /* Remove an existing pid file -- we're exiting. */
+ if(strlen(pidFilePath) > 0) {
+ unlink(pidFilePath);
+ }
+ } else {
+ /* Set up the name of the pid file, used only the first time. */
+ snprintf(pidFilePath, sizeof(pidFilePath), "/var/run/pppwatch-%s.pid",
+ device);
+
+ /* Create the pid file. */
+ do {
+ fd = open(pidFilePath, O_WRONLY|O_TRUNC|O_CREAT|O_EXCL|O_NOFOLLOW,
+ S_IRUSR|S_IWUSR | S_IRGRP | S_IROTH);
+ if(fd == -1) {
+ /* Try to open the file for read. */
+ fd = open(pidFilePath, O_RDONLY);
+ if(fd == -1)
+ failureExit(36); /* This is not good. */
+
+ /* We're already running, send a SIGHUP (we presume that they
+ * are calling ifup for a reason, so they probably want to
+ * redial) and then exit cleanly and let things go on in the
+ * background. Muck with the filename so that we don't go
+ * deleting the pid file for the already-running instance.
+ */
+ f = fdopen(fd, "r");
+ if(f == NULL)
+ failureExit(37);
+
+ pid = 0;
+ fscanf(f, "%d", &pid);
+ fclose(f);
+
+ if(pid) {
+ /* Try to kill it. */
+ if (kill(pid, SIGHUP) == -1) {
+ /* No such pid, remove the bogus pid file. */
+ unlink(pidFilePath);
+ } else {
+ /* Got it. Don't mess with the pid file on
+ * our way out. */
+ memset(pidFilePath, '\0', sizeof(pidFilePath));
+ failureExit(33);
+ }
+ }
+ }
+ } while(fd == -1);
+
+ f = fdopen(fd, "w");
+ if(f == NULL)
+ failureExit(31);
+ fprintf(f, "%d\n", getpid());
+ fclose(f);
+ }
+}
+
+/* Fork off and exec() a child process. If reap_child is non-zero,
+ * wait for the child to exit and return 0 if it ran successfully,
+ * otherwise return 0 right away and let the SIGCHLD handler deal. */
+static int
+fork_exec(gboolean reap, char *path, char *arg1, char *arg2, char *arg3)
+{
+ pid_t childpid;
+ int status;
+
+ sigset_t sigs;
+
+ childpid = fork();
+ if (childpid == -1)
+ exit(26);
+
+ if (childpid == 0) {
+ /* Do the exec magic. Prepare by clearing the signal mask for pppd. */
+ sigemptyset(&sigs);
+ sigprocmask(SIG_SETMASK, &sigs, NULL);
+
+ if (!reap) {
+ /* Make sure that the pppd is the leader for its process group. */
+ setsid();
+ setpgid(0, 0);
+ }
+
+ execl(path, path, arg1, arg2, arg3, NULL);
+ perror(path);
+ _exit (1);
+ }
+
+ if (reap) {
+ waitpid (childpid, &status, 0);
+ if (WIFEXITED(status) && (WEXITSTATUS(status) == 0)) {
+ return 0;
+ } else {
+ return 1;
+ }
+ } else {
+ return 0;
+ }
+}
+
+/* Relay the pppd's exit code up to the parent -- can only be called once,
+ * because the parent exits as soon as it reads a byte. */
+static void
+relay_exitcode(unsigned char code)
+{
+ unsigned char exitCode;
+ exitCode = code;
+ write(pipeArray[1], &exitCode, 1);
+ close(pipeArray[1]);
+}
+
+/* Unregister with netreport, relay a status byte to the parent, clean up
+ * the pid file, and bail. */
+static void
+failureExit(int exitCode) {
+ fork_exec(TRUE, "/sbin/netreport", "-r", NULL, NULL);
+ relay_exitcode(exitCode);
+ doPidFile(NULL);
+ exit(exitCode);
+}
+
+/* Keeps track of which signals we've seen so far. */
+static void
+signal_tracker (int signum) {
+ switch(signum) {
+ case SIGTERM:
+ theSigterm = 1; break;
+ case SIGINT:
+ theSigint = 1; break;
+ case SIGHUP:
+ theSighup = 1; break;
+ case SIGIO:
+ theSigio = 1; break;
+ case SIGCHLD:
+ theSigchld = 1; break;
+ case SIGALRM:
+ theSigalrm = 1; break;
+ }
+}
+
+/* Return a shvarFile for this interface, taking into account one level of
+ * inheritance (eeewww). */
+static shvarFile *
+shvarfilesGet(const char *interfaceName) {
+ shvarFile *ifcfg = NULL;
+ char ifcfgName[PATH_MAX];
+ char *ifcfgParentDiff = NULL;
+
+ /* Start with the basic configuration. */
+ snprintf(ifcfgName, sizeof(ifcfgName), "%s%s", IFCFGPREFIX, interfaceName);
+ ifcfg = svNewFile(ifcfgName);
+ if (ifcfg == NULL)
+ return NULL;
+
+ /* Do we have a parent interface (i.e., for ppp0-blah, ppp0) to inherit? */
+ ifcfgParentDiff = strchr(ifcfgName + sizeof(IFCFGPREFIX), '-');
+ if (ifcfgParentDiff) {
+ *ifcfgParentDiff = '\0';
+ ifcfg->parent = svNewFile(ifcfgName);
+ }
+
+ /* This is very unclean, but we have to close the shvar descriptors in
+ * case they've been numbered STDOUT_FILENO or STDERR_FILENO, which would
+ * be disastrous if inherited by a child process. */
+ close (ifcfg->fd);
+ ifcfg->fd = 0;
+
+ if (ifcfg->parent) {
+ close (ifcfg->parent->fd);
+ ifcfg->parent->fd = 0;
+ }
+
+ return ifcfg;
+}
+
+/* Convert a logical interface name to a real one by reading the lock
+ * file created by pppd. */
+static void
+pppLogicalToPhysical(int *pppdPid, char *logicalName, char **physicalName) {
+ char mapFileName[PATH_MAX];
+ char buffer[20];
+ char *p, *q;
+ int fd, n;
+ char *physicalDevice = NULL;
+
+ snprintf(mapFileName, sizeof(mapFileName), "/var/run/ppp-%s.pid",
+ logicalName);
+ fd = open(mapFileName, O_RDONLY);
+ if (fd != -1) {
+ n = read(fd, buffer, sizeof(buffer));
+ close(fd);
+ if (n > 0) {
+ buffer[n] = '\0';
+ /* Split up the file at the first line break -- the PID is on the
+ * first line. */
+ if((p = strchr(buffer, '\n')) != NULL) {
+ *p = '\0';
+ p++;
+ if (pppdPid) {
+ *pppdPid = atoi(buffer);
+ }
+ /* The physical device name is on the second line. */
+ if((q = strchr(p, '\n')) != NULL) {
+ *q = '\0';
+ physicalDevice = strdup(p);
+ }
+ }
+ }
+ }
+
+ if (physicalDevice) {
+ if (physicalName) {
+ *physicalName = physicalDevice;
+ } else {
+ free(physicalDevice);
+ }
+ } else {
+ if (physicalName) {
+ *physicalName = NULL;
+ }
+ }
+}
+
+/* Return a boolean value indicating if the interface is up. If not, or
+ * if we don't know, return FALSE. */
+static gboolean
+interfaceIsUp(char *device) {
+ int sock = -1;
+ int family[] = {PF_INET, PF_IPX, PF_AX25, PF_APPLETALK, 0};
+ int p = 0;
+ struct ifreq ifr;
+ gboolean retcode = FALSE;
+
+ /* Create a socket suitable for doing routing ioctls. */
+ for (p = 0; (sock == -1) && family[p]; p++) {
+ sock = socket(family[p], SOCK_DGRAM, 0);
+ }
+ if (sock == -1)
+ return FALSE;
+
+ /* Populate the request structure for getting the interface's status. */
+ memset(&ifr, 0, sizeof(ifr));
+ strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name) - 1);
+ ifr.ifr_name[sizeof(ifr.ifr_name) - 1] = '\0';
+
+ /* We return TRUE iff the ioctl succeeded and the interface is UP. */
+ if (ioctl(sock, SIOCGIFFLAGS, &ifr) == -1) {
+ retcode = FALSE;
+ } else if (ifr.ifr_flags & IFF_UP) {
+ retcode = TRUE;
+ }
+
+ close(sock);
+
+ return retcode;
+}
+
+/* Very, very minimal hangup function. This just attempts to hang up a device
+ * that should already be hung up, so it does not need to be bulletproof. */
+static void
+hangup(shvarFile *ifcfg) {
+ int fd;
+ char *line;
+ struct termios original_ts, ts;
+
+ line = svGetValue(ifcfg, "MODEMPORT");
+ if (line == NULL)
+ return;
+
+ fd = open(line, O_RDWR | O_NOCTTY | O_NONBLOCK);
+ if (fd != -1) {
+ if (tcgetattr(fd, &ts) != -1) {
+ original_ts = ts;
+ write(fd, "\r", 1); /* tickle modems that do not like dropped DTR */
+ usleep(1000);
+ cfsetospeed(&ts, B0);
+ tcsetattr(fd, TCSANOW, &ts);
+ usleep(100000);
+ tcsetattr(fd, TCSANOW, &original_ts);
+ }
+ close(fd);
+ }
+ free(line);
+}
+
+int
+main(int argc, char **argv) {
+ int status;
+ pid_t waited;
+ char *device, *real_device, *physicalDevice = NULL;
+ char *boot = NULL;
+ shvarFile *ifcfg;
+ sigset_t blockedsigs, unblockedsigs;
+ int pppdPid = 0;
+ int timeout = 30;
+ char *temp;
+ gboolean dying = FALSE;
+ int sendsig;
+ gboolean connectedOnce = FALSE;
+ int maxfail = 0; // MAXFAIL Patch <ssharkey@linux-no-limits.com>
+
+ if (argc < 2) {
+ fprintf (stderr, "usage: ppp-watch <interface-name> [boot]\n");
+ exit(30);
+ }
+
+ if (strncmp(argv[1], "ifcfg-", 6) == 0) {
+ device = argv[1] + 6;
+ } else {
+ device = argv[1];
+ }
+
+ detach(device); /* Prepare a child process to monitor pppd. When we
+ return, we'll be in the child. */
+
+ if ((argc > 2) && (strcmp("boot", argv[2]) == 0)) {
+ boot = argv[2];
+ }
+
+ ifcfg = shvarfilesGet(device);
+ if (ifcfg == NULL)
+ failureExit(28);
+
+ real_device = svGetValue(ifcfg, "DEVICE");
+ if (real_device == NULL)
+ real_device = device;
+
+ doPidFile(real_device);
+
+ /* We'll want to know which signal interrupted our sleep below, so
+ * attach a signal handler to these. */
+ set_signal(SIGTERM, signal_tracker);
+ set_signal(SIGINT, signal_tracker);
+ set_signal(SIGHUP, signal_tracker);
+ set_signal(SIGIO, signal_tracker);
+ set_signal(SIGCHLD, signal_tracker);
+
+ /* We time out only if we're being run at boot-time. */
+ if (boot) {
+ temp = svGetValue(ifcfg, "BOOTTIMEOUT");
+ if (temp) {
+ timeout = atoi(temp);
+ if (timeout < 1) timeout = 1;
+ free(temp);
+ } else {
+ timeout = 30;
+ }
+ set_signal(SIGALRM, signal_tracker);
+ alarm(timeout);
+ }
+
+ /* Register us to get a signal when something changes. Yes, that's vague. */
+ fork_exec(TRUE, "/sbin/netreport", NULL, NULL, NULL);
+
+ /* Reset theSigchld, which should have been triggered by netreport. */
+ theSigchld = 0;
+
+ /* We don't set up the procmask until after we have received the netreport
+ * signal. Do so now. */
+ sigemptyset(&blockedsigs);
+ sigaddset(&blockedsigs, SIGTERM);
+ sigaddset(&blockedsigs, SIGINT);
+ sigaddset(&blockedsigs, SIGHUP);
+ sigaddset(&blockedsigs, SIGIO);
+ sigaddset(&blockedsigs, SIGCHLD);
+ if (boot) {
+ sigaddset(&blockedsigs, SIGALRM);
+ }
+ sigprocmask(SIG_BLOCK, &blockedsigs, NULL);
+
+ sigfillset(&unblockedsigs);
+ sigdelset(&unblockedsigs, SIGTERM);
+ sigdelset(&unblockedsigs, SIGINT);
+ sigdelset(&unblockedsigs, SIGHUP);
+ sigdelset(&unblockedsigs, SIGIO);
+ sigdelset(&unblockedsigs, SIGCHLD);
+ if (boot) {
+ sigdelset(&unblockedsigs, SIGALRM);
+ }
+ sigprocmask(SIG_UNBLOCK, &unblockedsigs, NULL);
+
+ /* Initialize the retry timeout using the RETRYTIMEOUT setting. */
+ temp = svGetValue(ifcfg, "RETRYTIMEOUT");
+ if (temp) {
+ timeout = atoi(temp);
+ free(temp);
+ } else {
+ timeout = 30;
+ }
+
+ /* Start trying to bring the interface up. */
+ fork_exec(FALSE, IFUP_PPP, "daemon", device, boot);
+
+ while (TRUE) {
+ /* Wait for a signal. */
+ if (!theSigterm &&
+ !theSigint &&
+ !theSighup &&
+ !theSigio &&
+ !theSigchld &&
+ !theSigalrm) {
+ sigsuspend(&unblockedsigs);
+ }
+
+ /* If we got SIGTERM or SIGINT, give up and hang up. */
+ if (theSigterm || theSigint) {
+ theSigterm = theSigint = 0;
+
+ /* If we've already tried to exit this way, use SIGKILL instead
+ * of SIGTERM, because pppd's just being stubborn. */
+ if (dying) {
+ sendsig = SIGKILL;
+ } else {
+ sendsig = SIGTERM;
+ }
+ dying = TRUE;
+
+ /* Get the pid of our child pppd. */
+ pppLogicalToPhysical(&pppdPid, device, NULL);
+
+ /* We don't know what our child pid is. This is very confusing. */
+ if (!pppdPid) {
+ failureExit(35);
+ }
+
+ /* Die, pppd, die. */
+ kill(pppdPid, sendsig);
+ if (sendsig == SIGKILL) {
+ kill(-pppdPid, SIGTERM); /* Give it a chance to die nicely, then
+ kill its whole process group. */
+ usleep(2500000);
+ kill(-pppdPid, sendsig);
+ hangup(ifcfg);
+ failureExit(32);
+ }
+ }
+
+ /* If we got SIGHUP, reload and redial. */
+ if (theSighup) {
+ theSighup = 0;
+
+ /* Free and reload the configuration structure. */
+ if (ifcfg->parent)
+ svCloseFile(ifcfg->parent);
+ svCloseFile(ifcfg);
+ ifcfg = shvarfilesGet(device);
+
+ /* Get the PID of our child pppd. */
+ pppLogicalToPhysical(&pppdPid, device, NULL);
+ kill(pppdPid, SIGTERM);
+
+ /* We'll redial when the SIGCHLD arrives, even if PERSIST is
+ * not set (the latter handled by clearing the "we've connected
+ * at least once" flag). */
+ connectedOnce = FALSE;
+
+ /* We don't want to delay before redialing, either, so cut
+ * the retry timeout to zero. */
+ timeout = 0;
+ }
+
+ /* If we got a SIGIO (from netreport, presumably), check if the
+ * interface is up and return zero (via our parent) if it is. */
+ if (theSigio) {
+ theSigio = 0;
+
+ pppLogicalToPhysical(NULL, device, &physicalDevice);
+ if (physicalDevice) {
+ if (interfaceIsUp(physicalDevice)) {
+ /* The interface is up, so report a success to a parent if
+ * we have one. Any errors after this we just swallow. */
+ relay_exitcode(0);
+ connectedOnce = TRUE;
+ }
+ free(physicalDevice);
+ }
+ }
+
+ /* If we got a SIGCHLD, then pppd died (possibly because we killed it),
+ * and we need to restart it after timeout seconds. */
+ if (theSigchld) {
+ theSigchld = 0;
+
+ /* Find its pid, which is also its process group ID. */
+ waited = waitpid(-1, &status, 0);
+ if (waited == -1) {
+ continue;
+ }
+
+ /* Now, we need to kill any children of pppd still in pppd's
+ * process group, in case they are hanging around.
+ * pppd is dead (we just waited for it) but there is no
+ * guarantee that its children are dead, and they will
+ * hold the modem if we do not get rid of them.
+ * We have kept the old pid/pgrp around in pppdPid. */
+ if (pppdPid) {
+ kill(-pppdPid, SIGTERM); /* give it a chance to die nicely */
+ usleep(2500000);
+ kill(-pppdPid, SIGKILL);
+ hangup(ifcfg);
+ }
+ pppdPid = 0;
+
+ /* Bail if the child exitted abnormally or we were already
+ * signalled to kill it. */
+ if (!WIFEXITED(status)) {
+ failureExit(29);
+ }
+ if (dying) {
+ failureExit(WEXITSTATUS(status));
+ }
+
+ /* Error conditions from which we do not expect to recover
+ * without user intervention -- do not fill up the logs. */
+ switch (WEXITSTATUS(status)) {
+ case 1: case 2: case 3: case 4: case 6:
+ case 7: case 9: case 14: case 17:
+ failureExit(WEXITSTATUS(status));
+ break;
+ default:
+ break;
+ }
+
+ /* PGB 08/20/02: We no longer retry connecting MAXFAIL
+ times on a failed connect script unless RETRYCONNECT is
+ true. */
+ if ((WEXITSTATUS(status) == 8) &&
+ !svTrueValue(ifcfg, "RETRYCONNECT", FALSE)) {
+ failureExit(WEXITSTATUS(status));
+ }
+
+ /* If we've never connected, or PERSIST is set, dial again, up
+ * to MAXFAIL times. */
+ if ((WEXITSTATUS(status) == 8) ||
+ !connectedOnce ||
+ svTrueValue(ifcfg, "PERSIST", FALSE)) {
+ /* If we've been connected (i.e., if we didn't force a redial,
+ * but the connection went down) wait for DISCONNECTTIMEOUT
+ * seconds before redialing. */
+ if (connectedOnce) {
+ connectedOnce = FALSE;
+ temp = svGetValue(ifcfg, "DISCONNECTTIMEOUT");
+ if (temp) {
+ timeout = atoi(temp);
+ free(temp);
+ } else {
+ timeout = 2;
+ }
+ }
+ sigprocmask(SIG_UNBLOCK, &blockedsigs, NULL);
+ sleep(timeout);
+ sigprocmask(SIG_BLOCK, &blockedsigs, NULL);
+ if (!theSigterm &&
+ !theSigint &&
+ !theSighup &&
+ !theSigio &&
+ !theSigchld &&
+ !theSigalrm) {
+ fork_exec(FALSE, IFUP_PPP, "daemon", device, boot);
+ }
+ /* Reinitialize the retry timeout. */
+ temp = svGetValue(ifcfg, "RETRYTIMEOUT");
+ if (temp) {
+ timeout = atoi(temp);
+ free(temp);
+ } else {
+ timeout = 30;
+ }
+// Scott Sharkey <ssharkey@linux-no-limits.com>
+// MAXFAIL Patch...
+ temp = svGetValue(ifcfg, "MAXFAIL");
+ if (temp) {
+ maxfail = atoi(temp);
+ free(temp);
+ } else {
+ maxfail = 0;
+ }
+ if ( maxfail != 0 ) {
+ dialCount++;
+ if ( dialCount >= maxfail )
+ failureExit(WEXITSTATUS(status));
+ }
+ } else {
+ failureExit(WEXITSTATUS(status));
+ }
+ }
+
+ /* We timed out, and we're running at boot-time. */
+ if (theSigalrm) {
+ failureExit(34);
+ }
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 1999-2003 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/signal.h>
+#include <sys/poll.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+#include <popt.h>
+
+#include <regex.h>
+
+#include "initlog.h"
+#include "process.h"
+
+extern regex_t **regList;
+
+int forkCommand(char **args, int *outfd, int *errfd, int *cmdfd, int quiet) {
+ /* Fork command 'cmd', returning pid, and optionally pointer
+ * to open file descriptor fd */
+ int fdout=-1, fderr=-1, fdcmd=-1, pid;
+ int outpipe[2], errpipe[2], fdpipe[2];
+ int ourpid;
+
+ if ( (pipe(outpipe)==-1) || (pipe(errpipe)==-1) || (pipe(fdpipe)==-1) ) {
+ perror("pipe");
+ return -1;
+ }
+
+ if (outfd) {
+ fdout = outpipe[1];
+ *outfd = outpipe[0];
+ } else {
+ if (!quiet)
+ fdout=dup(1);
+ }
+ if (errfd) {
+ fderr = errpipe[1];
+ *errfd = errpipe[0];
+ } else {
+ if (!quiet)
+ fderr=dup(2);
+ }
+
+ if (cmdfd) {
+ *cmdfd = fdpipe[0];
+ fdcmd = fdpipe[1];
+ } else {
+ fdcmd = open("/dev/null",O_WRONLY);
+ }
+ if (fdout==-1 || fderr==-1 || fdcmd==-1)
+ return -1;
+ ourpid = getpid();
+ if ((pid = fork())==-1) {
+ perror("fork");
+ return -1;
+ }
+ /* We exec the command normally as the child. However, if we're getting passed
+ * back arguments via an fd, we'll exec it as the parent. Therefore, if Bill
+ * fucks up and we segfault or something, we don't kill rc.sysinit. */
+ if ( (cmdfd&&!pid) || (pid &&!cmdfd)) {
+ /* parent */
+ close(fdout);
+ close(fderr);
+ close(fdcmd);
+ if (!pid)
+ return ourpid;
+ else
+ return pid;
+ } else {
+ /* kid */
+ int sc_open_max;
+
+ if (outfd) {
+ if ( (dup2(fdout,1)==-1) ) {
+ perror("dup2");
+ exit(-1);
+ }
+ } else if (quiet)
+ if ((dup2(open("/dev/null",O_WRONLY),1))==-1) {
+ perror("dup2");
+ exit(-1);
+ }
+
+ if (errfd) {
+ if ((dup2(fderr,2)==-1)) {
+ perror("dup2");
+ exit(-1);
+ }
+ } else if (quiet)
+ if ((dup2(open("/dev/null",O_WRONLY),2))==-1) {
+ perror("dup2");
+ exit(-1);
+ }
+
+
+ if ((dup2(fdcmd,CMD_FD)==-1)) {
+ perror("dup2");
+ exit(-1);
+ }
+ close(fdout);
+ close(fderr);
+ close(fdcmd);
+ if (outfd)
+ close(*outfd);
+ if (errfd)
+ close(*errfd);
+ if (cmdfd)
+ close(*cmdfd);
+
+ /* close up extra fds, and hope this doesn't break anything */
+ sc_open_max = sysconf(_SC_OPEN_MAX);
+ if(sc_open_max > 1) {
+ int fd;
+ for(fd = 3; fd < sc_open_max; fd++) {
+ if (!(cmdfd && fd == CMD_FD))
+ close(fd);
+ }
+ }
+
+ execvp(args[0],args);
+ perror("execvp");
+ exit(-1);
+ }
+}
+
+int monitor(char *cmdname, int pid, int numfds, int *fds, int reexec, int quiet, int debug) {
+ struct pollfd *pfds;
+ char *outbuf=NULL;
+ char *tmpstr=NULL;
+ int x,y,rc=-1;
+ int done=0;
+ int output=0;
+ char **cmdargs=NULL;
+ char **tmpargs=NULL;
+ int cmdargc;
+ char *procpath = NULL;
+
+ if (reexec) {
+ procpath=malloc(20*sizeof(char));
+ snprintf(procpath,20,"/proc/%d",pid);
+ }
+
+ pfds = malloc(numfds*sizeof(struct pollfd));
+ for (x=0;x<numfds;x++) {
+ pfds[x].fd = fds[x];
+ pfds[x].events = POLLIN | POLLPRI;
+ }
+
+ while (!done) {
+ usleep(500);
+ if (((x=poll(pfds,numfds,500))==-1)&&errno!=EINTR) {
+ perror("poll");
+ free(pfds);
+ if (procpath)
+ free(procpath);
+ return -1;
+ }
+ if (!reexec) {
+ if (waitpid(pid,&rc,WNOHANG))
+ done=1;
+ } else {
+ struct stat sbuf;
+ /* if /proc/pid ain't there and /proc is, it's dead... */
+ if (stat(procpath,&sbuf)&&!stat("/proc/cpuinfo",&sbuf))
+ done=1;
+ }
+ if (x<0)
+ continue;
+ y=0;
+ while (y<numfds) {
+ if ( x && ((pfds[y].revents & (POLLIN | POLLPRI)) )) {
+ int bytesread = 0;
+
+ do {
+ char *b, *buf=calloc(8193,sizeof(char));
+ b = buf;
+ bytesread = read(pfds[y].fd,buf,8192);
+ if (bytesread==-1) {
+ perror("read");
+ free(pfds);
+ if (procpath)
+ free(procpath);
+ free(buf);
+ return -1;
+ }
+ if (bytesread) {
+ if (!quiet && !reexec)
+ write(1,buf,bytesread);
+ if (quiet) {
+ outbuf=realloc(outbuf,(outbuf ? strlen(outbuf)+bytesread+1 : bytesread+1));
+ if (!output) outbuf[0]='\0';
+ strcat(outbuf,buf);
+ output = 1;
+ }
+ while ((tmpstr=getLine(&buf))) {
+ int ignore=0;
+
+ if (regList) {
+ int count=0;
+
+ while (regList[count]) {
+ if (!regexec(regList[count],tmpstr,0,NULL,0)) {
+ ignore=1;
+ break;
+ }
+ count++;
+ }
+ }
+ if (!ignore) {
+ if (!reexec) {
+ if (getenv("IN_INITLOG")) {
+ char *buffer=calloc(8192,sizeof(char));
+ DDEBUG("sending =%s= to initlog parent\n",tmpstr);
+ snprintf(buffer,8192,"-n %s -s \"%s\"\n",
+ cmdname,tmpstr);
+ /* don't blow up if parent isn't there */
+ signal(SIGPIPE,SIG_IGN);
+ write(CMD_FD,buffer,strlen(buffer));
+ signal(SIGPIPE,SIG_DFL);
+ free(buffer);
+ } else {
+ logString(cmdname,tmpstr);
+ }
+ } else {
+ int z;
+
+ cmdargs=NULL;
+ tmpargs=NULL;
+ cmdargc=0;
+
+ poptParseArgvString(tmpstr,&cmdargc,&tmpargs);
+ cmdargs=malloc( (cmdargc+2) * sizeof(char *) );
+ cmdargs[0]=strdup("initlog");
+ for (z=0;z<(cmdargc);z++) {
+ cmdargs[z+1]=tmpargs[z];
+ }
+ cmdargs[cmdargc+1]=NULL;
+ processArgs(cmdargc+1,cmdargs,1);
+ free(cmdargs[0]);
+ free(tmpargs);
+ free(cmdargs);
+ }
+ }
+ if (tmpstr) free(tmpstr);
+ }
+ }
+ free(b);
+ } while ( bytesread==8192 );
+ }
+ y++;
+ }
+ }
+ if ((!WIFEXITED(rc)) || (rc=WEXITSTATUS(rc))) {
+ /* If there was an error and we're quiet, be loud */
+
+ if (quiet && output) {
+ write(1,outbuf,strlen(outbuf));
+ }
+ free(pfds);
+ if (procpath)
+ free(procpath);
+ if(outbuf)
+ free(outbuf);
+ return (rc);
+ }
+ free(pfds);
+ if (procpath)
+ free(procpath);
+ if(outbuf)
+ free(outbuf);
+ return 0;
+}
+
+int runCommand(char *cmd, int reexec, int quiet, int debug) {
+ int fds[2];
+ int pid,x;
+ char **args, **tmpargs;
+ char *cmdname;
+
+ poptParseArgvString(cmd,&x,&tmpargs);
+ args = malloc((x+1)*sizeof(char *));
+ for ( pid = 0; pid < x ; pid++) {
+ args[pid] = strdup(tmpargs[pid]);
+ }
+ args[pid] = NULL;
+ if (strcmp(args[0],"sh") && strcmp(args[0],"/bin/sh"))
+ cmdname = basename(args[0]);
+ else
+ cmdname = basename(args[1]);
+ if ((cmdname[0] =='K' || cmdname[0] == 'S') &&
+ ( cmdname[1] >= '0' && cmdname[1] <= '9' ) &&
+ ( cmdname[2] >= '0' && cmdname[2] <= '9' ) )
+ cmdname+=3;
+ if (!reexec) {
+ pid=forkCommand(args,&fds[0],&fds[1],NULL,quiet);
+ if (pid == -1)
+ return -1;
+ x=monitor(cmdname,pid,2,fds,reexec,quiet,debug);
+ } else {
+ setenv("IN_INITLOG","yes",1);
+ pid=forkCommand(args,NULL,NULL,&fds[0],quiet);
+ if (pid == -1)
+ return -1;
+ unsetenv("IN_INITLOG");
+ x=monitor(cmdname,pid,1,&fds[0],reexec,quiet,debug);
+ }
+ return x;
+}
--- /dev/null
+#ifndef PROCESS_H
+#define PROCESS_H
+
+
+#define CMD_FD 21
+
+int runCommand(char *cmd, int reexec, int quiet, int debug);
+
+#endif
--- /dev/null
+#include <sys/param.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+int main(int argc, char ** argv) {
+ char *buf = calloc (MAXPATHLEN+1, sizeof(char));
+
+ if (argc<1) return 1;
+ (void) readlink (argv[1], buf, MAXPATHLEN);
+ fprintf (stdout, "%s", buf);
+ exit (0);
+ }
--- /dev/null
+/* run-parts: run a bunch of scripts in a directory
+ *
+ * Debian run-parts program
+ * Copyright (C) 1996 Jeff Noxon <jeff@router.patch.net>,
+ * Copyright (C) 1996-1999 Guy Maor <maor@debian.org>
+ * Copyright (C) 2002-2012 Clint Adams <clint@debian.org>
+ *
+ * This is free software; see the GNU General Public License version 2
+ * or later for copying conditions. There is NO warranty.
+ *
+ * Based on run-parts.pl version 0.2, Copyright (C) 1994 Ian Jackson.
+ *
+ */
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <dirent.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#ifdef HAVE_GETOPT_H
+#include <getopt.h>
+#endif /* HAVE_GETOPT_H */
+#include <string.h>
+#include <errno.h>
+#include <ctype.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <regex.h>
+
+#define RUNPARTS_NORMAL 0
+#define RUNPARTS_ERE 1
+#define RUNPARTS_LSBSYSINIT 100
+
+int test_mode = 0;
+int list_mode = 0;
+int verbose_mode = 0;
+int report_mode = 0;
+int reverse_mode = 0;
+int exitstatus = 0;
+int regex_mode = 0;
+int exit_on_error_mode = 0;
+int new_session_mode = 0;
+
+int argcount = 0, argsize = 0;
+char **args = 0;
+
+char *custom_ere;
+regex_t hierre, tradre, excsre, classicalre, customre;
+
+static void catch_signals();
+static void restore_signals();
+
+static char* regex_get_error(int errcode, regex_t *compiled);
+static void regex_compile_pattern(void);
+static void regex_clean(void);
+
+void error(char *format, ...)
+{
+ va_list ap;
+
+ fprintf(stderr, "run-parts: ");
+
+ va_start(ap, format);
+ vfprintf(stderr, format, ap);
+ va_end(ap);
+
+ fprintf(stderr, "\n");
+}
+
+
+void version()
+{
+ fprintf(stderr, "Debian run-parts program, version " PACKAGE_VERSION
+ "\nCopyright (C) 1994 Ian Jackson, Copyright (C) 1996 Jeff Noxon.\n"
+ "Copyright (C) 1996,1997,1998,1999 Guy Maor\n"
+ "Copyright (C) 2002-2012 Clint Adams\n"
+ "This is free software; see the GNU General Public License version 2\n"
+ "or later for copying conditions. There is NO warranty.\n");
+ exit(0);
+}
+
+
+void usage()
+{
+ fprintf(stderr, "Usage: run-parts [OPTION]... DIRECTORY\n"
+ " --test print script names which would run, but don't run them.\n"
+ " --list print names of all valid files (can not be used with\n"
+ " --test)\n"
+ " -v, --verbose print script names before running them.\n"
+ " --report print script names if they produce output.\n"
+ " --reverse reverse execution order of scripts.\n"
+ " --exit-on-error exit as soon as a script returns with a non-zero exit\n"
+ " code.\n"
+ " --lsbsysinit validate filenames based on LSB sysinit specs.\n"
+ " --new-session run each script in a separate process session\n"
+ " --regex=PATTERN validate filenames based on POSIX ERE pattern PATTERN.\n"
+ " -u, --umask=UMASK sets umask to UMASK (octal), default is 022.\n"
+ " -a, --arg=ARGUMENT pass ARGUMENT to scripts, use once for each argument.\n"
+ " -V, --version output version information and exit.\n"
+ " -h, --help display this help and exit.\n");
+ exit(0);
+}
+
+
+/* The octal conversion in libc is not foolproof; it will take the 8 and 9
+ * digits under some circumstances. We'll just have to live with it.
+ */
+void set_umask()
+{
+ int mask, result;
+
+ result = sscanf(optarg, "%o", &mask);
+ if ((result != 1) || (mask > 07777) || (mask < 0)) {
+ error("bad umask value");
+ exit(1);
+ }
+
+ umask(mask);
+}
+
+/* Add an argument to the commands that we will call. Called once for
+ every argument. */
+void add_argument(char *newarg)
+{
+ if (argcount + 1 >= argsize) {
+ argsize = argsize ? argsize * 2 : 4;
+ args = realloc(args, argsize * (sizeof(char *)));
+ if (!args) {
+ error("failed to reallocate memory for arguments: %s", strerror(errno));
+ exit(1);
+ }
+ }
+ args[argcount++] = newarg;
+ args[argcount] = 0;
+}
+
+/* True or false? Is this a valid filename? */
+int valid_name(const struct dirent *d)
+{
+ char *s;
+ unsigned int retval;
+
+ s = (char *)&(d->d_name);
+
+ if (regex_mode == RUNPARTS_ERE)
+ retval = !regexec(&customre, s, 0, NULL, 0);
+
+ else if (regex_mode == RUNPARTS_LSBSYSINIT) {
+
+ if (!regexec(&hierre, s, 0, NULL, 0))
+ retval = regexec(&excsre, s, 0, NULL, 0);
+
+ else
+ retval = !regexec(&tradre, s, 0, NULL, 0);
+
+ } else {
+ if (!regexec(&classicalre, s, 0, NULL, 0)) {
+ retval = regexec(&excsre, s, 0, NULL, 0);
+ }
+ }
+
+ return retval;
+}
+
+/* Execute a file */
+void run_part(char *progname)
+{
+ int result, waited;
+ int pid, r;
+ int pout[2], perr[2];
+
+ waited = 0;
+
+ if (report_mode && (pipe(pout) || pipe(perr))) {
+ error("pipe: %s", strerror(errno));
+ exit(1);
+ }
+ if ((pid = fork()) < 0) {
+ error("failed to fork: %s", strerror(errno));
+ exit(1);
+ }
+ else if (!pid) {
+ restore_signals();
+ if (new_session_mode)
+ setsid();
+ if (report_mode) {
+ if (dup2(pout[1], STDOUT_FILENO) == -1 ||
+ dup2(perr[1], STDERR_FILENO) == -1) {
+ error("dup2: %s", strerror(errno));
+ exit(1);
+ }
+ close(pout[0]);
+ close(perr[0]);
+ close(pout[1]);
+ close(perr[1]);
+ }
+ args[0] = progname;
+ execv(progname, args);
+ error("failed to exec %s: %s", progname, strerror(errno));
+ exit(1);
+ }
+
+ if (report_mode) {
+ fd_set set;
+ sigset_t tempmask;
+ struct timespec zero_timeout;
+ struct timespec *the_timeout;
+ int max, printflag;
+ ssize_t c;
+ char buf[4096];
+
+ sigemptyset(&tempmask);
+ sigprocmask(0, NULL, &tempmask);
+ sigdelset(&tempmask, SIGCHLD);
+
+ memset(&zero_timeout, 0, sizeof(zero_timeout));
+ the_timeout = NULL;
+
+ close(pout[1]);
+ close(perr[1]);
+ max = pout[0] > perr[0] ? pout[0] + 1 : perr[0] + 1;
+ printflag = 0;
+
+ while (pout[0] >= 0 || perr[0] >= 0) {
+ if (!waited) {
+ r = waitpid(pid, &result, WNOHANG);
+ if (r == -1) {
+ error("waitpid: %s", strerror(errno));
+ exit(1);
+ }
+ if (r != 0 && (WIFEXITED(result) || WIFSIGNALED(result))) {
+ /* If the process dies, set a zero timeout. Rarely, some processes
+ * leak file descriptors (e.g., by starting a naughty daemon).
+ * select() would wait forever since the pipes wouldn't close.
+ * We loop, with a zero timeout, until there's no data left, then
+ * give up. This shouldn't affect non-leaky processes. */
+ waited = 1;
+ the_timeout = &zero_timeout;
+ }
+ }
+
+ FD_ZERO(&set);
+ if (pout[0] >= 0)
+ FD_SET(pout[0], &set);
+ if (perr[0] >= 0)
+ FD_SET(perr[0], &set);
+ r = pselect(max, &set, 0, 0, the_timeout, &tempmask);
+
+ if (r < 0) {
+ if (errno == EINTR)
+ continue;
+
+ error("select: %s", strerror(errno));
+ exit(1);
+ }
+ else if (r > 0) {
+ /* If STDOUT or STDERR get closed / full, we still run to completion
+ * (and just ignore that we can't output process output any more).
+ * Perhaps we should instead kill the child process we are running
+ * if that happens.
+ * For now partial writes are not retried to complete - that can
+ * and should be done, but needs care to ensure that we don't hang
+ * if the fd doesn't accept more data ever - or we need to decide that
+ * waiting is the appropriate thing to do.
+ */
+ int ignored;
+ if (pout[0] >= 0 && FD_ISSET(pout[0], &set)) {
+ c = read(pout[0], buf, sizeof(buf));
+ if (c > 0) {
+ if (!printflag) {
+ printf("%s:\n", progname);
+ fflush(stdout);
+ printflag = 1;
+ }
+ ignored = write(STDOUT_FILENO, buf, c);
+ }
+ else if (c == 0) {
+ close(pout[0]);
+ pout[0] = -1;
+ }
+ else if (c < 0) {
+ close(pout[0]);
+ pout[0] = -1;
+ error("failed to read from stdout pipe: %s", strerror (errno));
+ }
+ }
+ if (perr[0] >= 0 && FD_ISSET(perr[0], &set)) {
+ c = read(perr[0], buf, sizeof(buf));
+ if (c > 0) {
+ if (!printflag) {
+ fprintf(stderr, "%s:\n", progname);
+ fflush(stderr);
+ printflag = 1;
+ }
+ ignored = write(STDERR_FILENO, buf, c);
+ }
+ else if (c == 0) {
+ close(perr[0]);
+ perr[0] = -1;
+ }
+ else if (c < 0) {
+ close(perr[0]);
+ perr[0] = -1;
+ error("failed to read from error pipe: %s", strerror (errno));
+ }
+ }
+ }
+ else if (r == 0 && waited) {
+ /* Zero timeout, no data left. */
+ close(perr[0]);
+ perr[0] = -1;
+ close(pout[0]);
+ pout[0] = -1;
+ }
+ else {
+ /* assert(FALSE): select was called with infinite timeout, so
+ it either returns successfully or is interrupted */
+ } /*if */
+ } /*while */
+ }
+
+ if (!waited) {
+ r = waitpid(pid, &result, 0);
+
+ if (r == -1) {
+ error("waitpid: %s", strerror(errno));
+ exit(1);
+ }
+ }
+
+ if (WIFEXITED(result) && WEXITSTATUS(result)) {
+ error("%s exited with return code %d", progname, WEXITSTATUS(result));
+ exitstatus = 1;
+ }
+ else if (WIFSIGNALED(result)) {
+ error("%s exited because of uncaught signal %d", progname,
+ WTERMSIG(result));
+ exitstatus = 1;
+ }
+}
+
+static void handle_signal(int s)
+{
+ /* Do nothing */
+}
+
+/* Catch SIGCHLD with an empty function to interrupt select() */
+static void catch_signals()
+{
+ struct sigaction act;
+ sigset_t set;
+
+ memset(&act, 0, sizeof(act));
+ act.sa_handler = handle_signal;
+ act.sa_flags = SA_NOCLDSTOP;
+ sigaction(SIGCHLD, &act, NULL);
+
+ sigemptyset(&set);
+ sigaddset(&set, SIGCHLD);
+ sigprocmask(SIG_BLOCK, &set, NULL);
+}
+
+/* Unblock signals before execing a child */
+static void restore_signals()
+{
+ sigset_t set;
+ sigemptyset(&set);
+ sigaddset(&set, SIGCHLD);
+ sigprocmask(SIG_UNBLOCK, &set, NULL);
+}
+
+/* Find the parts to run & call run_part() */
+void run_parts(char *dirname)
+{
+ struct dirent **namelist;
+ char *filename;
+ size_t filename_length, dirname_length;
+ int entries, i, result;
+ struct stat st;
+
+ /* dirname + "/" */
+ dirname_length = strlen(dirname) + 1;
+ /* dirname + "/" + ".." + "\0" (This will save one realloc.) */
+ filename_length = dirname_length + 2 + 1;
+ if (!(filename = malloc(filename_length))) {
+ error("failed to allocate memory for path: %s", strerror(errno));
+ exit(1);
+ }
+ strcpy(filename, dirname);
+ strcat(filename, "/");
+
+ /* scandir() isn't POSIX, but it makes things easy. */
+ entries = scandir(dirname, &namelist, valid_name, alphasort);
+ if (entries < 0) {
+ error("failed to open directory %s: %s", dirname, strerror(errno));
+ exit(1);
+ }
+
+ i = reverse_mode ? 0 : entries;
+ for (i = reverse_mode ? (entries - 1) : 0;
+ reverse_mode ? (i >= 0) : (i < entries); reverse_mode ? i-- : i++) {
+ if (filename_length < dirname_length + strlen(namelist[i]->d_name) + 1) {
+ filename_length = dirname_length + strlen(namelist[i]->d_name) + 1;
+ if (!(filename = realloc(filename, filename_length))) {
+ error("failed to reallocate memory for path: %s", strerror(errno));
+ exit(1);
+ }
+ }
+ strcpy(filename + dirname_length, namelist[i]->d_name);
+
+ strcpy(filename, dirname);
+ strcat(filename, "/");
+ strcat(filename, namelist[i]->d_name);
+
+ result = stat(filename, &st);
+ if (result < 0) {
+ error("failed to stat component %s: %s", filename, strerror(errno));
+ if (exit_on_error_mode) {
+ exit(1);
+ }
+ else
+ continue;
+ }
+
+ if (S_ISREG(st.st_mode)) {
+ if (!access(filename, X_OK)) {
+ if (test_mode) {
+ printf("%s\n", filename);
+ }
+ else if (list_mode) {
+ if (!access(filename, R_OK))
+ printf("%s\n", filename);
+ }
+ else {
+ if (verbose_mode)
+ if (argcount) {
+ char **a = args;
+
+ fprintf(stderr, "run-parts: executing %s", filename);
+ while(*(++a))
+ fprintf(stderr, " %s", *a);
+ fprintf(stderr, "\n");
+ } else {
+ fprintf(stderr, "run-parts: executing %s\n", filename);
+ }
+ run_part(filename);
+ if (exitstatus != 0 && exit_on_error_mode) return;
+ }
+ }
+ else if (!access(filename, R_OK)) {
+ if (list_mode) {
+ printf("%s\n", filename);
+ }
+ }
+ else if (S_ISLNK(st.st_mode)) {
+ if (!list_mode) {
+ error("run-parts: component %s is a broken symbolic link\n",filename);
+ exitstatus = 1;
+ }
+ }
+ }
+ else if (!S_ISDIR(st.st_mode)) {
+ if (!list_mode) {
+ error("run-parts: component %s is not an executable plain file\n",
+ filename);
+ exitstatus = 1;
+ }
+ }
+
+ free(namelist[i]);
+ }
+ free(namelist);
+ free(filename);
+}
+
+/* Process options */
+int main(int argc, char *argv[])
+{
+ custom_ere = NULL;
+ umask(022);
+ add_argument(0);
+
+ for (;;) {
+ int c;
+ int option_index = 0;
+
+ static struct option long_options[] = {
+ {"test", 0, &test_mode, 1},
+ {"list", 0, &list_mode, 1},
+ {"verbose", 0, 0, 'v'},
+ {"report", 0, &report_mode, 1},
+ {"reverse", 0, &reverse_mode, 1},
+ {"umask", 1, 0, 'u'},
+ {"arg", 1, 0, 'a'},
+ {"help", 0, 0, 'h'},
+ {"version", 0, 0, 'V'},
+ {"lsbsysinit", 0, ®ex_mode, RUNPARTS_LSBSYSINIT},
+ {"regex", 1, ®ex_mode, RUNPARTS_ERE},
+ {"exit-on-error", 0, &exit_on_error_mode, 1},
+ {"new-session", 0, &new_session_mode, 1},
+ {0, 0, 0, 0}
+ };
+
+ c = getopt_long(argc, argv, "u:ha:vV", long_options, &option_index);
+ if (c == EOF)
+ break;
+ switch (c) {
+ case 0:
+ if(option_index==10) { /* hardcoding this will lead to trouble */
+ custom_ere = strdup(optarg);
+ }
+ break;
+ case 'u':
+ set_umask();
+ break;
+ case 'a':
+ add_argument(optarg);
+ break;
+ case 'h':
+ usage();
+ break;
+ case 'v':
+ verbose_mode = 1;
+ break;
+ case 'V':
+ version();
+ break;
+ default:
+ fprintf(stderr, "Try `run-parts --help' for more information.\n");
+ exit(1);
+ }
+ }
+
+ /* We require exactly one argument: the directory name */
+ if (optind != (argc - 1)) {
+ error("missing operand");
+ fprintf(stderr, "Try `run-parts --help' for more information.\n");
+ exit(1);
+ } else if (list_mode && test_mode) {
+ error("--list and --test can not be used together");
+ fprintf(stderr, "Try `run-parts --help' for more information.\n");
+ exit(1);
+ } else {
+ catch_signals();
+ regex_compile_pattern();
+ run_parts(argv[optind]);
+ regex_clean();
+
+ free(args);
+ free(custom_ere);
+
+ return exitstatus;
+ }
+}
+
+/*
+ * Compile patterns used by the application
+ *
+ * In order for a string to be matched by a pattern, this pattern must be
+ * compiled with the regcomp function. If an error occurs, the application
+ * exits and displays the error.
+ */
+static void
+regex_compile_pattern (void)
+{
+ int err;
+ regex_t *pt_regex;
+
+ if (regex_mode == RUNPARTS_ERE) {
+
+ if ((err = regcomp(&customre, custom_ere,
+ REG_EXTENDED | REG_NOSUB)) != 0)
+ pt_regex = &customre;
+
+ } else if (regex_mode == RUNPARTS_LSBSYSINIT) {
+
+ if ( (err = regcomp(&hierre, "^_?([a-z0-9_.]+-)+[a-z0-9]+$",
+ REG_EXTENDED | REG_NOSUB)) != 0)
+ pt_regex = &hierre;
+
+ else if ( (err = regcomp(&excsre, "^[a-z0-9-].*(\.rpm(save|new|orig)|~|,v)$",
+ REG_EXTENDED | REG_NOSUB)) != 0)
+ pt_regex = &excsre;
+
+ else if ( (err = regcomp(&tradre, "^[a-z0-9][a-z0-9-]*$", REG_NOSUB))
+ != 0)
+ pt_regex = &tradre;
+
+ } else if ( (err = regcomp(&classicalre, "^.+$",
+ REG_EXTENDED | REG_NOSUB)) != 0)
+ pt_regex = &classicalre;
+ else if ( (err = regcomp(&excsre, "^[.]|(\.rpm(save|new|orig)|~|,v)$",
+ REG_EXTENDED | REG_NOSUB)) != 0)
+ pt_regex = &excsre;
+
+ if (err != 0) {
+ fprintf(stderr, "Unable to build regexp: %s", \
+ regex_get_error(err, pt_regex));
+ exit(1);
+ }
+}
+
+/*
+ * Get a regex error.
+ *
+ * This function allocates a buffer to store the regex error description.
+ * If a buffer cannot be allocated, then the use of xmalloc will end the
+ * program.
+ *
+ * @errcode: return error code from a one of the regex functions
+ * @compiled: compile pattern which causes the failure
+ *
+ * It returns a pointer on the current regex error description.
+ */
+static char *
+regex_get_error(int errcode, regex_t *compiled)
+{
+ size_t length;
+ char *buf;
+
+ length = regerror(errcode, compiled, NULL, 0);
+ buf = malloc(length);
+ if (buf == 0) {
+ error("Virtual memory exhausted\n");
+ exit(1);
+ }
+
+ regerror(errcode, compiled, buf, length);
+
+ return buf;
+}
+
+/*
+ * Clean the compiled patterns according to the current regex_mode
+ */
+static void
+regex_clean(void)
+{
+ if (regex_mode == RUNPARTS_ERE)
+ regfree(&customre);
+
+ else if (regex_mode == RUNPARTS_LSBSYSINIT) {
+ regfree(&hierre);
+ regfree(&excsre);
+ regfree(&tradre);
+
+ } else {
+ regfree(&classicalre);
+ regfree(&excsre);
+ }
+}
--- /dev/null
+/*
+ Simple wrapper to run a command with different uid/gid.
+
+ Based on the implementation in freedt:
+ Copyright (C) 2003 Adam Sampson <azz@gnu.org>
+
+ 2010-05-07 – Jacek Konieczny <jajcus> updated for standalone compilation
+ and included in PLD rc-scripts
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <string.h>
+#include <sys/param.h>
+#include <pwd.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <grp.h>
+#include <limits.h>
+
+const char *progname = "setuidgid";
+const char *proghelp =
+ "Usage: setuidgid [OPTIONS] account command ...\n"
+ "Run a command under the uid and gid of an account.\n\n"
+ "-s Also set supplementary groups\n";
+
+void die(const char *msg) {
+ fprintf(stderr, "%s: %s\n", progname, msg);
+ exit(1);
+}
+void die2(const char *msg1, const char *msg2) {
+ fprintf(stderr, "%s: %s: %s\n", progname, msg1, msg2);
+ exit(1);
+}
+void show_version() {
+ fprintf(stderr, "%s $Rev$ (PLD Linux rc-scripts)\n", progname);
+}
+void version() {
+ show_version();
+ exit(0);
+}
+void help(int retval) {
+ show_version();
+ fprintf(stderr, "\n%s"
+ "-V Show version information\n"
+ "-h Show usage information\n", proghelp);
+ exit(retval);
+}
+
+int main(int argc, char **argv) {
+ struct passwd *p;
+ int use_supp = 0;
+
+ while (1) {
+ int c = getopt(argc, argv, "+V?hs");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 's':
+ use_supp = 1;
+ break;
+ case 'V':
+ version();
+ case 'h':
+ case '?':
+ help(0);
+ default:
+ help(1);
+ }
+ }
+
+ if ((argc - optind) < 2)
+ help(1);
+
+ p = getpwnam(argv[optind]);
+ if (!p)
+ die("no such account");
+ if (setgid(p->pw_gid) < 0)
+ die("unable to setgid");
+
+ if (use_supp) {
+ gid_t groups[NGROUPS_MAX];
+ size_t n = 0;
+
+ setgrent();
+ while (1) {
+ char **p;
+ struct group *g = getgrent();
+ if (g == NULL)
+ break;
+
+ for (p = g->gr_mem; *p != NULL; p++) {
+ if (strcmp(*p, argv[optind]) == 0) {
+ if (n >= NGROUPS_MAX)
+ die("too many groups");
+ groups[n++] = g->gr_gid;
+ }
+ }
+ }
+
+ if (setgroups(n, groups) < 0)
+ die("unable to setgroups");
+ } else {
+ if (setgroups(1, &p->pw_gid) < 0)
+ die("unable to setgroups");
+ }
+
+ if (setuid(p->pw_uid) < 0)
+ die("unable to setuid");
+
+ ++optind;
+ execvp(argv[optind], &argv[optind]);
+ die2(argv[optind], "unable to exec");
+
+ return 0; /* NOTREACHED */
+}
+
--- /dev/null
+/*
+ * shvar.c
+ *
+ * Implementation of non-destructively reading/writing files containing
+ * only shell variable declarations and full-line comments.
+ *
+ * Includes explicit inheritance mechanism intended for use with
+ * Red Hat Linux ifcfg-* files. There is no protection against
+ * inheritance loops; they will generally cause stack overflows.
+ * Furthermore, they are only intended for one level of inheritance;
+ * the value setting algorithm assumes this.
+ *
+ * Copyright 1999,2000 Red Hat, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include "shvar.h"
+
+/* Open the file <name>, returning a shvarFile on success and NULL on failure.
+ Add a wrinkle to let the caller specify whether or not to create the file
+ (actually, return a structure anyway) if it doesn't exist. */
+static shvarFile *
+svOpenFile(const char *name, gboolean create)
+{
+ shvarFile *s = NULL;
+ int closefd = 0;
+
+ s = g_malloc0(sizeof(shvarFile));
+
+ s->fd = open(name, O_RDWR); /* NOT O_CREAT */
+ if (s->fd == -1) {
+ /* try read-only */
+ s->fd = open(name, O_RDONLY); /* NOT O_CREAT */
+ if (s->fd != -1) closefd = 1;
+ }
+ s->fileName = g_strdup(name);
+
+ if (s->fd != -1) {
+ struct stat buf;
+ char *p, *q;
+
+ if (fstat(s->fd, &buf) < 0) goto bail;
+ s->arena = g_malloc0(buf.st_size + 1);
+
+ if (read(s->fd, s->arena, buf.st_size) < 0) goto bail;
+
+ /* we'd use g_strsplit() here, but we want a list, not an array */
+ for(p = s->arena; (q = strchr(p, '\n')) != NULL; p = q + 1) {
+ s->lineList = g_list_append(s->lineList, g_strndup(p, q - p));
+ }
+
+ /* closefd is set if we opened the file read-only, so go ahead and
+ close it, because we can't write to it anyway */
+ if (closefd) {
+ close(s->fd);
+ s->fd = -1;
+ }
+
+ return s;
+ }
+
+ if (create) {
+ return s;
+ }
+
+bail:
+ if (s->fd != -1) close(s->fd);
+ if (s->arena) g_free (s->arena);
+ if (s->fileName) g_free (s->fileName);
+ g_free (s);
+ return NULL;
+}
+
+/* Open the file <name>, return shvarFile on success, NULL on failure */
+shvarFile *
+svNewFile(const char *name)
+{
+ return svOpenFile(name, FALSE);
+}
+
+/* Create a new file structure, returning actual data if the file exists,
+ * and a suitable starting point if it doesn't. */
+shvarFile *
+svCreateFile(const char *name)
+{
+ return svOpenFile(name, TRUE);
+}
+
+/* remove escaped characters in place */
+static void
+unescape(char *s) {
+ int len, i;
+
+ len = strlen(s);
+ if ((s[0] == '"' || s[0] == '\'') && s[0] == s[len-1]) {
+ i = len - 2;
+ memmove(s, s+1, i);
+ s[i+1] = '\0';
+ len = i;
+ }
+ for (i = 0; i < len; i++) {
+ if (s[i] == '\\') {
+ memmove(s+i, s+i+1, len-(i+1));
+ len--;
+ }
+ s[len] = '\0';
+ }
+}
+
+
+/* create a new string with all necessary characters escaped.
+ * caller must free returned string
+ */
+static const char escapees[] = "\"'\\$~`"; /* must be escaped */
+static const char spaces[] = " \t|&;()<>"; /* only require "" */
+static char *
+escape(const char *s) {
+ char *new;
+ int i, j, mangle = 0, space = 0;
+ int newlen, slen;
+ static int esclen, splen;
+
+ if (!esclen) esclen = strlen(escapees);
+ if (!splen) splen = strlen(spaces);
+ slen = strlen(s);
+
+ for (i = 0; i < slen; i++) {
+ if (strchr(escapees, s[i])) mangle++;
+ if (strchr(spaces, s[i])) space++;
+ }
+ if (!mangle && !space) return strdup(s);
+
+ newlen = slen + mangle + 3; /* 3 is extra ""\0 */
+ new = g_malloc0(newlen);
+ if (!new) return NULL;
+
+ j = 0;
+ new[j++] = '"';
+ for (i = 0; i < slen; i++) {
+ if (strchr(escapees, s[i])) {
+ new[j++] = '\\';
+ }
+ new[j++] = s[i];
+ }
+ new[j++] = '"';
+ g_assert(j == slen + mangle + 2); /* j is the index of the '\0' */
+
+ return new;
+}
+
+/* Get the value associated with the key, and leave the current pointer
+ * pointing at the line containing the value. The char* returned MUST
+ * be freed by the caller.
+ */
+char *
+svGetValue(shvarFile *s, const char *key)
+{
+ char *value = NULL;
+ char *line;
+ char *keyString;
+ int len;
+
+ g_assert(s);
+ g_assert(key);
+
+ keyString = g_malloc0(strlen(key) + 2);
+ strcpy(keyString, key);
+ keyString[strlen(key)] = '=';
+ len = strlen(keyString);
+
+ for (s->current = s->lineList; s->current; s->current = s->current->next) {
+ line = s->current->data;
+ if (!strncmp(keyString, line, len)) {
+ value = g_strdup(line + len);
+ unescape(value);
+ break;
+ }
+ }
+ g_free(keyString);
+
+ if (value) {
+ if (value[0]) {
+ return value;
+ } else {
+ g_free(value);
+ return NULL;
+ }
+ }
+ if (s->parent) value = svGetValue(s->parent, key);
+ return value;
+}
+
+/* return 1 if <key> resolves to any truth value (e.g. "yes", "y", "true")
+ * return 0 if <key> resolves to any non-truth value (e.g. "no", "n", "false")
+ * return <default> otherwise
+ */
+int
+svTrueValue(shvarFile *s, const char *key, int def)
+{
+ char *tmp;
+ int returnValue = def;
+
+ tmp = svGetValue(s, key);
+ if (!tmp) return returnValue;
+
+ if ( (!strcasecmp("yes", tmp)) ||
+ (!strcasecmp("true", tmp)) ||
+ (!strcasecmp("t", tmp)) ||
+ (!strcasecmp("y", tmp)) ) returnValue = 1;
+ else
+ if ( (!strcasecmp("no", tmp)) ||
+ (!strcasecmp("false", tmp)) ||
+ (!strcasecmp("f", tmp)) ||
+ (!strcasecmp("n", tmp)) ) returnValue = 0;
+
+ g_free (tmp);
+ return returnValue;
+}
+
+
+/* Set the variable <key> equal to the value <value>.
+ * If <key> does not exist, and the <current> pointer is set, append
+ * the key=value pair after that line. Otherwise, prepend the pair
+ * to the top of the file. Here's the algorithm, as the C code
+ * seems to be rather dense:
+ *
+ * if (value == NULL), then:
+ * if val2 (parent): change line to key= or append line key=
+ * if val1 (this) : delete line
+ * else noop
+ * else use this table:
+ * val2
+ * NULL value other
+ * v NULL append line noop append line
+ * a
+ * l value noop noop noop
+ * 1
+ * other change line delete line change line
+ *
+ * No changes are ever made to the parent config file, only to the
+ * specific file passed on the command line.
+ *
+ */
+void
+svSetValue(shvarFile *s, const char *key, const char *value)
+{
+ char *newval = NULL, *val1 = NULL, *val2 = NULL;
+ char *keyValue;
+
+ g_assert(s);
+ g_assert(key);
+ /* value may be NULL */
+
+ if (value) newval = escape(value);
+ keyValue = g_strdup_printf("%s=%s", key, newval ? newval : "");
+
+ val1 = svGetValue(s, key);
+ if (val1 && newval && !strcmp(val1, newval)) goto bail;
+ if (s->parent) val2 = svGetValue(s->parent, key);
+
+ if (!newval || !newval[0]) {
+ /* delete value somehow */
+ if (val2) {
+ /* change/append line to get key= */
+ if (s->current) s->current->data = keyValue;
+ else s->lineList = g_list_append(s->lineList, keyValue);
+ s->freeList = g_list_append(s->freeList, keyValue);
+ s->modified = 1;
+ } else if (val1) {
+ /* delete line */
+ s->lineList = g_list_remove_link(s->lineList, s->current);
+ g_list_free_1(s->current);
+ s->modified = 1;
+ goto bail; /* do not need keyValue */
+ }
+ goto end;
+ }
+
+ if (!val1) {
+ if (val2 && !strcmp(val2, newval)) goto end;
+ /* append line */
+ s->lineList = g_list_append(s->lineList, keyValue);
+ s->freeList = g_list_append(s->freeList, keyValue);
+ s->modified = 1;
+ goto end;
+ }
+
+ /* deal with a whole line of noops */
+ if (val1 && !strcmp(val1, newval)) goto end;
+
+ /* At this point, val1 && val1 != value */
+ if (val2 && !strcmp(val2, newval)) {
+ /* delete line */
+ s->lineList = g_list_remove_link(s->lineList, s->current);
+ g_list_free_1(s->current);
+ s->modified = 1;
+ goto bail; /* do not need keyValue */
+ } else {
+ /* change line */
+ if (s->current) s->current->data = keyValue;
+ else s->lineList = g_list_append(s->lineList, keyValue);
+ s->freeList = g_list_append(s->freeList, keyValue);
+ s->modified = 1;
+ }
+
+end:
+ if (newval) free(newval);
+ if (val1) free(val1);
+ if (val2) free(val2);
+ return;
+
+bail:
+ if (keyValue) free (keyValue);
+ goto end;
+}
+
+/* Write the current contents iff modified. Returns -1 on error
+ * and 0 on success. Do not write if no values have been modified.
+ * The mode argument is only used if creating the file, not if
+ * re-writing an existing file, and is passed unchanged to the
+ * open() syscall.
+ */
+int
+svWriteFile(shvarFile *s, int mode)
+{
+ FILE *f;
+ int tmpfd;
+
+ if (s->modified) {
+ if (s->fd == -1)
+ s->fd = open(s->fileName, O_WRONLY|O_CREAT, mode);
+ if (s->fd == -1)
+ return -1;
+ if (ftruncate(s->fd, 0) < 0)
+ return -1;
+
+ tmpfd = dup(s->fd);
+ f = fdopen(tmpfd, "w");
+ fseek(f, 0, SEEK_SET);
+ for (s->current = s->lineList; s->current; s->current = s->current->next) {
+ char *line = s->current->data;
+ fprintf(f, "%s\n", line);
+ }
+ fclose(f);
+ }
+
+ return 0;
+}
+
+
+/* Close the file descriptor (if open) and delete the shvarFile.
+ * Returns -1 on error and 0 on success.
+ */
+int
+svCloseFile(shvarFile *s)
+{
+
+ g_assert(s);
+
+ if (s->fd != -1) close(s->fd);
+
+ g_free(s->arena);
+ for (s->current = s->freeList; s->current; s->current = s->current->next) {
+ g_free(s->current->data);
+ }
+ g_free(s->fileName);
+ g_list_free(s->freeList);
+ g_list_free(s->lineList); /* implicitly frees s->current */
+ g_free(s);
+ return 0;
+}
--- /dev/null
+/*
+ * shvar.h
+ *
+ * Interface for non-destructively reading/writing files containing
+ * only shell variable declarations and full-line comments.
+ *
+ * Includes explicit inheritance mechanism intended for use with
+ * Red Hat Linux ifcfg-* files. There is no protection against
+ * inheritance loops; they will generally cause stack overflows.
+ * Furthermore, they are only intended for one level of inheritance;
+ * the value setting algorithm assumes this.
+ *
+ * Copyright 1999 Red Hat, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef _SHVAR_H
+#define _SHVAR_H
+
+#include <glib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+typedef struct _shvarFile shvarFile;
+struct _shvarFile {
+ char *fileName; /* read-only */
+ int fd; /* read-only */
+ char *arena; /* ignore */
+ GList *lineList; /* read-only */
+ GList *freeList; /* ignore */
+ GList *current; /* set implicitly or explicitly,
+ points to element of lineList */
+ shvarFile *parent; /* set explicitly */
+ int modified; /* ignore */
+};
+
+
+/* Create the file <name>, return shvarFile on success, NULL on failure */
+shvarFile *
+svCreateFile(const char *name);
+
+/* Open the file <name>, return shvarFile on success, NULL on failure */
+shvarFile *
+svNewFile(const char *name);
+
+/* Get the value associated with the key, and leave the current pointer
+ * pointing at the line containing the value. The char* returned MUST
+ * be freed by the caller.
+ */
+char *
+svGetValue(shvarFile *s, const char *key);
+
+/* return 1 if <key> resolves to any truth value (e.g. "yes", "y", "true")
+ * return 0 if <key> resolves to any non-truth value (e.g. "no", "n", "false")
+ * return <def> otherwise
+ */
+int
+svTrueValue(shvarFile *s, const char *key, int def);
+
+/* Set the variable <key> equal to the value <value>.
+ * If <key> does not exist, and the <current> pointer is set, append
+ * the key=value pair after that line. Otherwise, prepend the pair
+ * to the top of the file.
+ */
+void
+svSetValue(shvarFile *s, const char *key, const char *value);
+
+
+/* Write the current contents iff modified. Returns -1 on error
+ * and 0 on success. Do not write if no values have been modified.
+ * The mode argument is only used if creating the file, not if
+ * re-writing an existing file, and is passed unchanged to the
+ * open() syscall.
+ */
+int
+svWriteFile(shvarFile *s, int mode);
+
+/* Close the file descriptor (if open) and delete the shvarFile.
+ * Returns -1 on error and 0 on success.
+ */
+int
+svCloseFile(shvarFile *s);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* ! _SHVAR_H */
--- /dev/null
+/*
+ * A rewrite of the original Debian's start-stop-daemon Perl script
+ * in C (faster - it is executed many times during system startup).
+ *
+ * Written by Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>,
+ * public domain. Based conceptually on start-stop-daemon.pl, by Ian
+ * Jackson <ijackson@gnu.ai.mit.edu>. May be used and distributed
+ * freely for any purpose. Changes by Christian Schwarz
+ * <schwarz@monet.m.isar.de>, to make output conform to the Debian
+ * Console Message Standard, also placed in public domain. Minor
+ * changes by Klee Dienes <klee@debian.org>, also placed in the Public
+ * Domain.
+ *
+ * Changes by Ben Collins <bcollins@debian.org>, added --chuid, --background
+ * and --make-pidfile options, placed in public domain aswell.
+ *
+ * Port to OpenBSD by Sontri Tomo Huynh <huynh.29@osu.edu>
+ * and Andreas Schuldei <andreas@schuldei.org>
+ *
+ * Changes by Ian Jackson: added --retry (and associated rearrangements).
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#if defined(linux)
+# define OSLinux
+#elif defined(__GNU__)
+# define OSHURD
+#elif defined(__sparc__)
+# define OSsunos
+#elif defined(OPENBSD) || defined(__OpenBSD__)
+# define OSOpenBSD
+#elif defined(hpux)
+# define OShpux
+#elif defined(__FreeBSD__)
+# define OSFreeBSD
+#elif defined(__NetBSD__)
+# define OSNetBSD
+#else
+# error Unknown architecture - cannot build start-stop-daemon
+#endif
+
+#define MIN_POLL_INTERVAL 20000 /*us*/
+
+#if defined(OSHURD)
+# include <hurd.h>
+# include <ps.h>
+#endif
+
+#if defined(OSOpenBSD) || defined(OSFreeBSD) || defined(OSNetBSD)
+#include <sys/param.h>
+#include <sys/user.h>
+#include <sys/proc.h>
+#include <sys/stat.h>
+#include <sys/sysctl.h>
+#include <sys/types.h>
+
+#include <err.h>
+#include <kvm.h>
+#include <limits.h>
+#endif
+
+#if HAVE_SYS_CAPABILITY_H
+#include <sys/prctl.h>
+#include <sys/capability.h>
+#endif
+
+#if defined(OShpux)
+#include <sys/param.h>
+#include <sys/pstat.h>
+#endif
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <signal.h>
+#include <sys/stat.h>
+#include <dirent.h>
+#include <sys/time.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <pwd.h>
+#include <grp.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/termios.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <assert.h>
+#include <ctype.h>
+
+#ifdef HAVE_ERROR_H
+# include <error.h>
+#endif
+
+static int testmode = 0;
+static int quietmode = 0;
+static int exitnodo = 1;
+static int start = 0;
+static int stop = 0;
+static int background = 0;
+static int mpidfile = 0;
+static int signal_nr = 15;
+static const char *signal_str = NULL;
+static int user_id = -1;
+static int runas_uid = -1;
+static int runas_gid = -1;
+static const char *userspec = NULL;
+static char *changeuser = NULL;
+static const char *changegroup = NULL;
+static char *changeroot = NULL;
+static const char *changedir = "/";
+static const char *cmdname = NULL;
+static char *execname = NULL;
+static char *startas = NULL;
+static const char *pidfile = NULL;
+static char what_stop[1024];
+static const char *schedule_str = NULL;
+static const char *progname = "";
+static int nicelevel = 0;
+static char *caplist = NULL;
+
+static struct stat exec_stat;
+#if defined(OSHURD)
+static struct proc_stat_list *procset = NULL;
+#endif
+
+
+struct pid_list {
+ struct pid_list *next;
+ pid_t pid;
+};
+
+static struct pid_list *found = NULL;
+static struct pid_list *killed = NULL;
+
+struct schedule_item {
+ enum { sched_timeout, sched_signal, sched_goto, sched_forever } type;
+ int value; /* seconds, signal no., or index into array */
+ /* sched_forever is only seen within parse_schedule and callees */
+};
+
+static int schedule_length;
+static struct schedule_item *schedule = NULL;
+
+static void *xmalloc(int size);
+static void push(struct pid_list **list, pid_t pid);
+static void do_help(void);
+static void parse_options(int argc, char * const *argv);
+static int pid_is_user(pid_t pid, uid_t uid);
+static int pid_is_cmd(pid_t pid, const char *name);
+static void check(pid_t pid);
+static void do_pidfile(const char *name);
+static void do_stop(int signal_nr, int quietmode,
+ int *n_killed, int *n_notkilled, int retry_nr);
+#if defined(OSLinux) || defined(OShpux)
+static int pid_is_exec(pid_t pid, const struct stat *esb);
+#endif
+
+
+#ifdef __GNUC__
+static void fatal(const char *format, ...)
+ NONRETURNPRINTFFORMAT(1, 2);
+static void badusage(const char *msg)
+ NONRETURNING;
+#else
+static void fatal(const char *format, ...);
+static void badusage(const char *msg);
+#endif
+
+/* This next part serves only to construct the TVCALC macro, which
+ * is used for doing arithmetic on struct timeval's. It works like this:
+ * TVCALC(result, expression);
+ * where result is a struct timeval (and must be an lvalue) and
+ * expression is the single expression for both components. In this
+ * expression you can use the special values TVELEM, which when fed a
+ * const struct timeval* gives you the relevant component, and
+ * TVADJUST. TVADJUST is necessary when subtracting timevals, to make
+ * it easier to renormalise. Whenver you subtract timeval elements,
+ * you must make sure that TVADJUST is added to the result of the
+ * subtraction (before any resulting multiplication or what have you).
+ * TVELEM must be linear in TVADJUST.
+ */
+typedef long tvselector(const struct timeval*);
+static long tvselector_sec(const struct timeval *tv) { return tv->tv_sec; }
+static long tvselector_usec(const struct timeval *tv) { return tv->tv_usec; }
+#define TVCALC_ELEM(result, expr, sec, adj) \
+{ \
+ const long TVADJUST = adj; \
+ long (*const TVELEM)(const struct timeval*) = tvselector_##sec; \
+ (result).tv_##sec = (expr); \
+}
+#define TVCALC(result,expr) \
+do { \
+ TVCALC_ELEM(result, expr, sec, (-1)); \
+ TVCALC_ELEM(result, expr, usec, (+1000000)); \
+ (result).tv_sec += (result).tv_usec / 1000000; \
+ (result).tv_usec %= 1000000; \
+} while(0)
+
+
+static void
+fatal(const char *format, ...)
+{
+ va_list arglist;
+
+ fprintf(stderr, "%s: ", progname);
+ va_start(arglist, format);
+ vfprintf(stderr, format, arglist);
+ va_end(arglist);
+ putc('\n', stderr);
+ exit(2);
+}
+
+
+static void *
+xmalloc(int size)
+{
+ void *ptr;
+
+ ptr = malloc(size);
+ if (ptr)
+ return ptr;
+ fatal("malloc(%d) failed", size);
+}
+
+
+static void
+xgettimeofday(struct timeval *tv)
+{
+ if (gettimeofday(tv,0) != 0)
+ fatal("gettimeofday failed: %s", strerror(errno));
+}
+
+
+static void
+push(struct pid_list **list, pid_t pid)
+{
+ struct pid_list *p;
+
+ p = xmalloc(sizeof(*p));
+ p->next = *list;
+ p->pid = pid;
+ *list = p;
+}
+
+static void
+clear(struct pid_list **list)
+{
+ struct pid_list *here, *next;
+
+ for (here = *list; here != NULL; here = next) {
+ next = here->next;
+ free(here);
+ }
+
+ *list = NULL;
+}
+
+static void
+do_help(void)
+{
+ printf(
+"start-stop-daemon VERSION for Debian - small and fast C version written by\n"
+"Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>, public domain.\n"
+"\n"
+"Usage:\n"
+" start-stop-daemon -S|--start options ... -- arguments ...\n"
+" start-stop-daemon -K|--stop options ...\n"
+" start-stop-daemon -H|--help\n"
+" start-stop-daemon -V|--version\n"
+"\n"
+"Options (at least one of --exec|--pidfile|--user is required):\n"
+" -x|--exec <executable> program to start/check if it is running\n"
+" -p|--pidfile <pid-file> pid file to check\n"
+" -c|--chuid <name|uid[:group|gid]>\n"
+" change to this user/group before starting process\n"
+" -u|--user <username>|<uid> stop processes owned by this user\n"
+" -g|--group <group|gid> run process as this group\n"
+" -n|--name <process-name> stop processes with this name\n"
+" -s|--signal <signal> signal to send (default TERM)\n"
+" -a|--startas <pathname> program to start (default is <executable>)\n"
+" -D|--dropcap <capbilities> drop theses capabilities\n"
+" -C|--chdir <directory> Change to <directory>(default is /)\n"
+" -N|--nicelevel <incr> add incr to the process's nice level\n"
+" -b|--background force the process to detach\n"
+" -m|--make-pidfile create the pidfile before starting\n"
+" -R|--retry <schedule> check whether processes die, and retry\n"
+" -t|--test test mode, don't do anything\n"
+" -o|--oknodo exit status 0 (not 1) if nothing done\n"
+" -q|--quiet be more quiet\n"
+" -v|--verbose be more verbose\n"
+"Retry <schedule> is <item>|/<item>/... where <item> is one of\n"
+" -<signal-num>|[-]<signal-name> send that signal\n"
+" <timeout> wait that many seconds\n"
+" forever repeat remainder forever\n"
+"or <schedule> may be just <timeout>, meaning <signal>/<timeout>/KILL/<timeout>\n"
+"\n"
+"Exit status: 0 = done 1 = nothing done (=> 0 if --oknodo)\n"
+" 3 = trouble 2 = with --retry, processes wouldn't die\n");
+}
+
+
+static void
+badusage(const char *msg)
+{
+ if (msg)
+ fprintf(stderr, "%s: %s\n", progname, msg);
+ fprintf(stderr, "Try `%s --help' for more information.\n", progname);
+ exit(3);
+}
+
+struct sigpair {
+ const char *name;
+ int signal;
+};
+
+const struct sigpair siglist[] = {
+ { "ABRT", SIGABRT },
+ { "ALRM", SIGALRM },
+ { "FPE", SIGFPE },
+ { "HUP", SIGHUP },
+ { "ILL", SIGILL },
+ { "INT", SIGINT },
+ { "KILL", SIGKILL },
+ { "PIPE", SIGPIPE },
+ { "QUIT", SIGQUIT },
+ { "SEGV", SIGSEGV },
+ { "TERM", SIGTERM },
+ { "USR1", SIGUSR1 },
+ { "USR2", SIGUSR2 },
+ { "CHLD", SIGCHLD },
+ { "CONT", SIGCONT },
+ { "STOP", SIGSTOP },
+ { "TSTP", SIGTSTP },
+ { "TTIN", SIGTTIN },
+ { "TTOU", SIGTTOU }
+};
+
+static int parse_integer(const char *string, int *value_r) {
+ unsigned long ul;
+ char *ep;
+
+ if (!string[0])
+ return -1;
+
+ ul= strtoul(string,&ep,10);
+ if (ul > INT_MAX || *ep != '\0')
+ return -1;
+
+ *value_r= ul;
+ return 0;
+}
+
+static int parse_signal(const char *signal_str, int *signal_nr)
+{
+ unsigned int i;
+
+ if (parse_integer(signal_str, signal_nr) == 0)
+ return 0;
+
+ for (i = 0; i < sizeof (siglist) / sizeof (siglist[0]); i++) {
+ if (strcmp (signal_str, siglist[i].name) == 0) {
+ *signal_nr = siglist[i].signal;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+parse_schedule_item(const char *string, struct schedule_item *item) {
+ const char *after_hyph;
+
+ if (!strcmp(string,"forever")) {
+ item->type = sched_forever;
+ } else if (isdigit(string[0])) {
+ item->type = sched_timeout;
+ if (parse_integer(string, &item->value) != 0)
+ badusage("invalid timeout value in schedule");
+ } else if ((after_hyph = string + (string[0] == '-')) &&
+ parse_signal(after_hyph, &item->value) == 0) {
+ item->type = sched_signal;
+ } else {
+ badusage("invalid schedule item (must be [-]<signal-name>, "
+ "-<signal-number>, <timeout> or `forever'");
+ }
+}
+
+static void
+parse_schedule(const char *schedule_str) {
+ char item_buf[20];
+ const char *slash;
+ int count, repeatat;
+ ptrdiff_t str_len;
+
+ count = 0;
+ for (slash = schedule_str; *slash; slash++)
+ if (*slash == '/')
+ count++;
+
+ schedule_length = (count == 0) ? 4 : count+1;
+ schedule = xmalloc(sizeof(*schedule) * schedule_length);
+
+ if (count == 0) {
+ schedule[0].type = sched_signal;
+ schedule[0].value = signal_nr;
+ parse_schedule_item(schedule_str, &schedule[1]);
+ if (schedule[1].type != sched_timeout) {
+ badusage ("--retry takes timeout, or schedule list"
+ " of at least two items");
+ }
+ schedule[2].type = sched_signal;
+ schedule[2].value = SIGKILL;
+ schedule[3]= schedule[1];
+ } else {
+ count = 0;
+ repeatat = -1;
+ while (schedule_str != NULL) {
+ slash = strchr(schedule_str,'/');
+ str_len = slash ? slash - schedule_str : strlen(schedule_str);
+ if (str_len >= (ptrdiff_t)sizeof(item_buf))
+ badusage("invalid schedule item: far too long"
+ " (you must delimit items with slashes)");
+ memcpy(item_buf, schedule_str, str_len);
+ item_buf[str_len] = 0;
+ schedule_str = slash ? slash+1 : NULL;
+
+ parse_schedule_item(item_buf, &schedule[count]);
+ if (schedule[count].type == sched_forever) {
+ if (repeatat >= 0)
+ badusage("invalid schedule: `forever'"
+ " appears more than once");
+ repeatat = count;
+ continue;
+ }
+ count++;
+ }
+ if (repeatat >= 0) {
+ schedule[count].type = sched_goto;
+ schedule[count].value = repeatat;
+ count++;
+ }
+ assert(count == schedule_length);
+ }
+}
+
+#ifdef HAVE_SYS_CAPABILITY_H
+static void
+remove_capabilities(char *capstr) {
+ cap_value_t capval;
+ char *savedptr, *ptr;
+ cap_t caps;
+
+ caps = cap_get_proc();
+ if (caps == NULL) {
+ fatal("Unable to retrieve my capabilities");
+ }
+
+ ptr = strtok_r(capstr, ",", &savedptr);
+ while (ptr) {
+ if (cap_from_name(ptr, &capval) != 0) {
+ errno = EINVAL;
+ fatal("Unable to parse this capability : \"%s\"", ptr);
+ }
+
+ if (prctl(PR_CAPBSET_DROP, capval, 0, 0) != 0) {
+ fatal("Unable to drop this capability: %s", ptr);
+ }
+
+ if (cap_set_flag(caps, CAP_INHERITABLE, 1, (cap_value_t *)&capval, CAP_CLEAR) != 0) {
+ fatal("Unable to clear the capability %s", ptr);
+ }
+
+ ptr = strtok_r(NULL, ",", &savedptr);
+ }
+
+ if (cap_set_proc(caps) != 0) {
+ fatal("Unable to remove theses capabilities from the inherited set\n");
+ }
+
+ if (cap_free(caps) == -1) {
+ fatal("Cannot free the capability");
+ }
+}
+#endif
+
+static void
+parse_options(int argc, char * const *argv)
+{
+ static struct option longopts[] = {
+ { "help", 0, NULL, 'H'},
+ { "stop", 0, NULL, 'K'},
+ { "start", 0, NULL, 'S'},
+ { "version", 0, NULL, 'V'},
+ { "startas", 1, NULL, 'a'},
+ { "name", 1, NULL, 'n'},
+ { "oknodo", 0, NULL, 'o'},
+ { "pidfile", 1, NULL, 'p'},
+ { "quiet", 0, NULL, 'q'},
+ { "signal", 1, NULL, 's'},
+ { "test", 0, NULL, 't'},
+ { "user", 1, NULL, 'u'},
+ { "group", 1, NULL, 'g'},
+ { "chroot", 1, NULL, 'r'},
+ { "dropcap", 1, NULL, 'D'},
+ { "verbose", 0, NULL, 'v'},
+ { "exec", 1, NULL, 'x'},
+ { "chuid", 1, NULL, 'c'},
+ { "nicelevel", 1, NULL, 'N'},
+ { "background", 0, NULL, 'b'},
+ { "make-pidfile", 0, NULL, 'm'},
+ { "retry", 1, NULL, 'R'},
+ { "chdir", 1, NULL, 'd'},
+ { NULL, 0, NULL, 0}
+ };
+ int c;
+
+ for (;;) {
+ c = getopt_long(argc, argv, "HKSVa:n:op:qr:s:tu:vx:c:N:bmR:g:d:D",
+ longopts, (int *) 0);
+ if (c == -1)
+ break;
+ switch (c) {
+ case 'H': /* --help */
+ do_help();
+ exit(0);
+ case 'K': /* --stop */
+ stop = 1;
+ break;
+ case 'S': /* --start */
+ start = 1;
+ break;
+ case 'V': /* --version */
+ printf("start-stop-daemon " VERSION "\n");
+ exit(0);
+ case 'a': /* --startas <pathname> */
+ startas = optarg;
+ break;
+ case 'n': /* --name <process-name> */
+ cmdname = optarg;
+ break;
+ case 'o': /* --oknodo */
+ exitnodo = 0;
+ break;
+ case 'p': /* --pidfile <pid-file> */
+ pidfile = optarg;
+ break;
+ case 'q': /* --quiet */
+ quietmode = 1;
+ break;
+ case 's': /* --signal <signal> */
+ signal_str = optarg;
+ break;
+ case 't': /* --test */
+ testmode = 1;
+ break;
+ case 'u': /* --user <username>|<uid> */
+ userspec = optarg;
+ break;
+ case 'v': /* --verbose */
+ quietmode = -1;
+ break;
+ case 'x': /* --exec <executable> */
+ execname = optarg;
+ break;
+ case 'c': /* --chuid <username>|<uid> */
+ /* we copy the string just in case we need the
+ * argument later. */
+ changeuser = strdup(optarg);
+ changeuser = strtok(changeuser, ":");
+ changegroup = strtok(NULL, ":");
+ break;
+ case 'g': /* --group <group>|<gid> */
+ changegroup = optarg;
+ break;
+ case 'r': /* --chroot /new/root */
+ changeroot = optarg;
+ break;
+ case 'D': /* --dropcap cap_net_raw,cap_mac_admin */
+#ifdef HAVE_SYS_CAPABILITY_H
+ caplist = optarg;
+#else
+ badusage("Capabilities are not supported on your OS");
+#endif
+ break;
+ case 'N': /* --nice */
+ nicelevel = atoi(optarg);
+ break;
+ case 'b': /* --background */
+ background = 1;
+ break;
+ case 'm': /* --make-pidfile */
+ mpidfile = 1;
+ break;
+ case 'R': /* --retry <schedule>|<timeout> */
+ schedule_str = optarg;
+ break;
+ case 'd': /* --chdir /new/dir */
+ changedir = optarg;
+ break;
+ default:
+ badusage(NULL); /* message printed by getopt */
+ }
+ }
+
+ if (signal_str != NULL) {
+ if (parse_signal (signal_str, &signal_nr) != 0)
+ badusage("signal value must be numeric or name"
+ " of signal (KILL, INT, ...)");
+ }
+
+ if (schedule_str != NULL) {
+ parse_schedule(schedule_str);
+ }
+
+ if (start == stop)
+ badusage("need one of --start or --stop");
+
+ if (!execname && !pidfile && !userspec && !cmdname)
+ badusage("need at least one of --exec, --pidfile, --user or --name");
+
+ if (!startas)
+ startas = execname;
+
+ if (start && !startas)
+ badusage("--start needs --exec or --startas");
+
+ if (mpidfile && pidfile == NULL)
+ badusage("--make-pidfile is only relevant with --pidfile");
+
+ if (background && !start)
+ badusage("--background is only relevant with --start");
+
+}
+
+#if defined(OSLinux)
+static int
+pid_is_exec(pid_t pid, const struct stat *esb)
+{
+ struct stat sb;
+ char buf[32];
+
+ sprintf(buf, "/proc/%d/exe", pid);
+ if (stat(buf, &sb) != 0)
+ return 0;
+ return (sb.st_dev == esb->st_dev && sb.st_ino == esb->st_ino);
+}
+
+
+static int
+pid_is_user(pid_t pid, uid_t uid)
+{
+ struct stat sb;
+ char buf[32];
+
+ sprintf(buf, "/proc/%d", pid);
+ if (stat(buf, &sb) != 0)
+ return 0;
+ return (sb.st_uid == uid);
+}
+
+
+static int
+pid_is_cmd(pid_t pid, const char *name)
+{
+ char buf[32];
+ FILE *f;
+ int c;
+
+ sprintf(buf, "/proc/%d/stat", pid);
+ f = fopen(buf, "r");
+ if (!f)
+ return 0;
+ while ((c = getc(f)) != EOF && c != '(')
+ ;
+ if (c != '(') {
+ fclose(f);
+ return 0;
+ }
+ /* this hopefully handles command names containing ')' */
+ while ((c = getc(f)) != EOF && c == *name)
+ name++;
+ fclose(f);
+ return (c == ')' && *name == '\0');
+}
+#endif /* OSLinux */
+
+
+#if defined(OSHURD)
+static void
+init_procset(void)
+{
+ struct ps_context *context;
+ error_t err;
+
+ err = ps_context_create(getproc(), &context);
+ if (err)
+ error(1, err, "ps_context_create");
+
+ err = proc_stat_list_create(context, &procset);
+ if (err)
+ error(1, err, "proc_stat_list_create");
+
+ err = proc_stat_list_add_all(procset, 0, 0);
+ if (err)
+ error(1, err, "proc_stat_list_add_all");
+}
+
+static struct proc_stat *
+get_proc_stat (pid_t pid, ps_flags_t flags)
+{
+ struct proc_stat *ps;
+ ps_flags_t wanted_flags = PSTAT_PID | flags;
+
+ if (!procset)
+ init_procset();
+
+ ps = proc_stat_list_pid_proc_stat(procset, pid);
+ if (!ps)
+ return NULL;
+ if (proc_stat_set_flags(ps, wanted_flags))
+ return NULL;
+ if ((proc_stat_flags(ps) & wanted_flags) != wanted_flags)
+ return NULL;
+
+ return ps;
+}
+
+static int
+pid_is_user(pid_t pid, uid_t uid)
+{
+ struct proc_stat *ps;
+
+ ps = get_proc_stat(pid, PSTAT_OWNER_UID);
+ return ps && proc_stat_owner_uid(ps) == uid;
+}
+
+static int
+pid_is_cmd(pid_t pid, const char *name)
+{
+ struct proc_stat *ps;
+
+ ps = get_proc_stat(pid, PSTAT_ARGS);
+ return ps && !strcmp(proc_stat_args(ps), name);
+}
+
+static int
+pid_is_running(pid_t pid)
+{
+ return get_proc_stat(pid, 0) != NULL;
+}
+
+#else /* !OSHURD */
+
+static int
+pid_is_running(pid_t pid)
+{
+ struct stat sb;
+ char buf[32];
+
+ sprintf(buf, "/proc/%d", pid);
+ if (stat(buf, &sb) != 0) {
+ if (errno!=ENOENT)
+ fatal("Error stating %s: %s", buf, strerror(errno));
+ return 0;
+ }
+
+ return 1;
+}
+
+#endif /* OSHURD */
+
+static void
+check(pid_t pid)
+{
+#if defined(OSLinux) || defined(OShpux)
+ if (execname && !pid_is_exec(pid, &exec_stat))
+#elif defined(OSHURD) || defined(OSFreeBSD) || defined(OSNetBSD)
+ /* I will try this to see if it works */
+ if (execname && !pid_is_cmd(pid, execname))
+#endif
+ return;
+ if (userspec && !pid_is_user(pid, user_id))
+ return;
+ if (cmdname && !pid_is_cmd(pid, cmdname))
+ return;
+ if (start && !pid_is_running(pid))
+ return;
+ if (stop && pid_is_running(pid))
+ push(&found, pid);
+}
+
+static void
+do_pidfile(const char *name)
+{
+ FILE *f;
+ pid_t pid;
+
+ f = fopen(name, "r");
+ if (f) {
+ if (fscanf(f, "%d", &pid) == 1)
+ check(pid);
+ fclose(f);
+ } else if (errno != ENOENT)
+ fatal("open pidfile %s: %s", name, strerror(errno));
+
+}
+
+/* WTA: this needs to be an autoconf check for /proc/pid existance.
+ */
+
+#if defined(OSLinux) || defined (OSsunos) || defined(OSfreebsd)
+static void
+do_procinit(void)
+{
+ DIR *procdir;
+ struct dirent *entry;
+ int foundany;
+ pid_t pid;
+
+ procdir = opendir("/proc");
+ if (!procdir)
+ fatal("opendir /proc: %s", strerror(errno));
+
+ foundany = 0;
+ while ((entry = readdir(procdir)) != NULL) {
+ if (sscanf(entry->d_name, "%d", &pid) != 1)
+ continue;
+ foundany++;
+ check(pid);
+ }
+ closedir(procdir);
+ if (!foundany)
+ fatal("nothing in /proc - not mounted?");
+}
+#endif /* OSLinux */
+
+
+#if defined(OSHURD)
+static int
+check_proc_stat (struct proc_stat *ps)
+{
+ check(ps->pid);
+ return 0;
+}
+
+static void
+do_procinit(void)
+{
+ if (!procset)
+ init_procset();
+
+ proc_stat_list_for_each (procset, check_proc_stat);
+}
+#endif /* OSHURD */
+
+
+#if defined(OSOpenBSD) || defined(OSFreeBSD) || defined(OSNetBSD)
+static int
+pid_is_cmd(pid_t pid, const char *name)
+{
+ kvm_t *kd;
+ int nentries, argv_len=0;
+ struct kinfo_proc *kp;
+ char errbuf[_POSIX2_LINE_MAX], buf[_POSIX2_LINE_MAX];
+ char **pid_argv_p;
+ char *start_argv_0_p, *end_argv_0_p;
+
+
+ kd = kvm_openfiles(NULL, NULL, NULL, O_RDONLY, errbuf);
+ if (kd == 0)
+ errx(1, "%s", errbuf);
+ if ((kp = kvm_getprocs(kd, KERN_PROC_PID, pid, &nentries)) == 0)
+ errx(1, "%s", kvm_geterr(kd));
+ if ((pid_argv_p = kvm_getargv(kd, kp, argv_len)) == 0)
+ errx(1, "%s", kvm_geterr(kd));
+
+ start_argv_0_p = *pid_argv_p;
+ /* find and compare string */
+
+ /* find end of argv[0] then copy and cut of str there. */
+ if ((end_argv_0_p = strchr(*pid_argv_p, ' ')) == 0 )
+ /* There seems to be no space, so we have the command
+ * allready in its desired form. */
+ start_argv_0_p = *pid_argv_p;
+ else {
+ /* Tests indicate that this never happens, since
+ * kvm_getargv itselfe cuts of tailing stuff. This is
+ * not what the manpage says, however. */
+ strncpy(buf, *pid_argv_p, (end_argv_0_p - start_argv_0_p));
+ buf[(end_argv_0_p - start_argv_0_p) + 1] = '\0';
+ start_argv_0_p = buf;
+ }
+
+ if (strlen(name) != strlen(start_argv_0_p))
+ return 0;
+ return (strcmp(name, start_argv_0_p) == 0) ? 1 : 0;
+}
+
+static int
+pid_is_user(pid_t pid, uid_t uid)
+{
+ kvm_t *kd;
+ int nentries; /* Value not used */
+ uid_t proc_uid;
+ struct kinfo_proc *kp;
+ char errbuf[_POSIX2_LINE_MAX];
+
+
+ kd = kvm_openfiles(NULL, NULL, NULL, O_RDONLY, errbuf);
+ if (kd == 0)
+ errx(1, "%s", errbuf);
+ if ((kp = kvm_getprocs(kd, KERN_PROC_PID, pid, &nentries)) == 0)
+ errx(1, "%s", kvm_geterr(kd));
+ if (kp->kp_proc.p_cred )
+ kvm_read(kd, (u_long)&(kp->kp_proc.p_cred->p_ruid),
+ &proc_uid, sizeof(uid_t));
+ else
+ return 0;
+ return (proc_uid == (uid_t)uid);
+}
+
+static int
+pid_is_exec(pid_t pid, const char *name)
+{
+ kvm_t *kd;
+ int nentries;
+ struct kinfo_proc *kp;
+ char errbuf[_POSIX2_LINE_MAX], *pidexec;
+
+ kd = kvm_openfiles(NULL, NULL, NULL, O_RDONLY, errbuf);
+ if (kd == 0)
+ errx(1, "%s", errbuf);
+ if ((kp = kvm_getprocs(kd, KERN_PROC_PID, pid, &nentries)) == 0)
+ errx(1, "%s", kvm_geterr(kd));
+ pidexec = (&kp->kp_proc)->p_comm;
+ if (strlen(name) != strlen(pidexec))
+ return 0;
+ return (strcmp(name, pidexec) == 0) ? 1 : 0;
+}
+
+
+static void
+do_procinit(void)
+{
+ /* Nothing to do */
+}
+
+#endif /* OSOpenBSD */
+
+
+#if defined(OShpux)
+static int
+pid_is_user(pid_t pid, uid_t uid)
+{
+ struct pst_status pst;
+
+ if (pstat_getproc(&pst, sizeof(pst), (size_t) 0, (int) pid) < 0)
+ return 0;
+ return ((uid_t) pst.pst_uid == uid);
+}
+
+static int
+pid_is_cmd(pid_t pid, const char *name)
+{
+ struct pst_status pst;
+
+ if (pstat_getproc(&pst, sizeof(pst), (size_t) 0, (int) pid) < 0)
+ return 0;
+ return (strcmp(pst.pst_ucomm, name) == 0);
+}
+
+static int
+pid_is_exec(pid_t pid, const struct stat *esb)
+{
+ struct pst_status pst;
+
+ if (pstat_getproc(&pst, sizeof(pst), (size_t) 0, (int) pid) < 0)
+ return 0;
+ return ((dev_t) pst.pst_text.psf_fsid.psfs_id == esb->st_dev
+ && (ino_t) pst.pst_text.psf_fileid == esb->st_ino);
+}
+
+static void
+do_procinit(void)
+{
+ struct pst_status pst[10];
+ int i, count;
+ int idx = 0;
+
+ while ((count = pstat_getproc(pst, sizeof(pst[0]), 10, idx)) > 0) {
+ for (i = 0; i < count; i++)
+ check(pst[i].pst_pid);
+ idx = pst[count - 1].pst_idx + 1;
+ }
+}
+#endif /* OShpux */
+
+
+static void
+do_findprocs(void)
+{
+ clear(&found);
+
+ if (pidfile)
+ do_pidfile(pidfile);
+ else
+ do_procinit();
+}
+
+/* return 1 on failure */
+static void
+do_stop(int signal_nr, int quietmode, int *n_killed, int *n_notkilled, int retry_nr)
+{
+ struct pid_list *p;
+
+ do_findprocs();
+
+ *n_killed = 0;
+ *n_notkilled = 0;
+
+ if (!found)
+ return;
+
+ clear(&killed);
+
+ for (p = found; p; p = p->next) {
+ if (testmode) {
+ printf("Would send signal %d to %d.\n",
+ signal_nr, p->pid);
+ (*n_killed)++;
+ } else if (kill(p->pid, signal_nr) == 0) {
+ push(&killed, p->pid);
+ (*n_killed)++;
+ } else {
+ printf("%s: warning: failed to kill %d: %s\n",
+ progname, p->pid, strerror(errno));
+ (*n_notkilled)++;
+ }
+ }
+ if (quietmode < 0 && killed) {
+ printf("Stopped %s (pid", what_stop);
+ for (p = killed; p; p = p->next)
+ printf(" %d", p->pid);
+ putchar(')');
+ if (retry_nr > 0)
+ printf(", retry #%d", retry_nr);
+ printf(".\n");
+ }
+}
+
+
+static void
+set_what_stop(const char *str)
+{
+ strncpy(what_stop, str, sizeof(what_stop));
+ what_stop[sizeof(what_stop)-1] = '\0';
+}
+
+static int
+run_stop_schedule(void)
+{
+ int r, position, n_killed, n_notkilled, value, ratio, anykilled, retry_nr;
+ struct timeval stopat, before, after, interval, maxinterval;
+
+ if (testmode) {
+ if (schedule != NULL) {
+ printf("Ignoring --retry in test mode\n");
+ schedule = NULL;
+ }
+ }
+
+ if (cmdname)
+ set_what_stop(cmdname);
+ else if (execname)
+ set_what_stop(execname);
+ else if (pidfile)
+ sprintf(what_stop, "process in pidfile `%.200s'", pidfile);
+ else if (userspec)
+ sprintf(what_stop, "process(es) owned by `%.200s'", userspec);
+ else
+ fatal("internal error, please report");
+
+ anykilled = 0;
+ retry_nr = 0;
+
+ if (schedule == NULL) {
+ do_stop(signal_nr, quietmode, &n_killed, &n_notkilled, 0);
+ if (n_notkilled > 0 && quietmode <= 0)
+ printf("%d pids were not killed\n", n_notkilled);
+ if (n_killed)
+ anykilled = 1;
+ goto x_finished;
+ }
+
+ for (position = 0; position < schedule_length; ) {
+ value= schedule[position].value;
+ n_notkilled = 0;
+
+ switch (schedule[position].type) {
+
+ case sched_goto:
+ position = value;
+ continue;
+
+ case sched_signal:
+ do_stop(value, quietmode, &n_killed, &n_notkilled, retry_nr++);
+ if (!n_killed)
+ goto x_finished;
+ else
+ anykilled = 1;
+ goto next_item;
+
+ case sched_timeout:
+ /* We want to keep polling for the processes, to see if they've exited,
+ * or until the timeout expires.
+ *
+ * This is a somewhat complicated algorithm to try to ensure that we
+ * notice reasonably quickly when all the processes have exited, but
+ * don't spend too much CPU time polling. In particular, on a fast
+ * machine with quick-exiting daemons we don't want to delay system
+ * shutdown too much, whereas on a slow one, or where processes are
+ * taking some time to exit, we want to increase the polling
+ * interval.
+ *
+ * The algorithm is as follows: we measure the elapsed time it takes
+ * to do one poll(), and wait a multiple of this time for the next
+ * poll. However, if that would put us past the end of the timeout
+ * period we wait only as long as the timeout period, but in any case
+ * we always wait at least MIN_POLL_INTERVAL (20ms). The multiple
+ * (`ratio') starts out as 2, and increases by 1 for each poll to a
+ * maximum of 10; so we use up to between 30% and 10% of the
+ * machine's resources (assuming a few reasonable things about system
+ * performance).
+ */
+ xgettimeofday(&stopat);
+ stopat.tv_sec += value;
+ ratio = 1;
+ for (;;) {
+ xgettimeofday(&before);
+ if (timercmp(&before,&stopat,>))
+ goto next_item;
+
+ do_stop(0, 1, &n_killed, &n_notkilled, 0);
+ if (!n_killed)
+ goto x_finished;
+
+ xgettimeofday(&after);
+
+ if (!timercmp(&after,&stopat,<))
+ goto next_item;
+
+ if (ratio < 10)
+ ratio++;
+
+ TVCALC(interval, ratio * (TVELEM(&after) - TVELEM(&before) + TVADJUST));
+ TVCALC(maxinterval, TVELEM(&stopat) - TVELEM(&after) + TVADJUST);
+
+ if (timercmp(&interval,&maxinterval,>))
+ interval = maxinterval;
+
+ if (interval.tv_sec == 0 &&
+ interval.tv_usec <= MIN_POLL_INTERVAL)
+ interval.tv_usec = MIN_POLL_INTERVAL;
+
+ r = select(0,0,0,0,&interval);
+ if (r < 0 && errno != EINTR)
+ fatal("select() failed for pause: %s",
+ strerror(errno));
+ }
+
+ default:
+ assert(!"schedule[].type value must be valid");
+
+ }
+
+ next_item:
+ position++;
+ }
+
+ if (quietmode <= 0)
+ printf("Program %s, %d process(es), refused to die.\n",
+ what_stop, n_killed);
+
+ return 2;
+
+x_finished:
+ if (!anykilled) {
+ if (quietmode <= 0)
+ printf("No %s found running; none killed.\n", what_stop);
+ return exitnodo;
+ } else {
+ return 0;
+ }
+}
+
+
+int main(int argc, char **argv) NONRETURNING;
+int
+main(int argc, char **argv)
+{
+ int devnull_fd = -1;
+#ifdef HAVE_TIOCNOTTY
+ int tty_fd = -1;
+#endif
+ progname = argv[0];
+
+ parse_options(argc, argv);
+ argc -= optind;
+ argv += optind;
+
+ if (execname && stat(execname, &exec_stat))
+ fatal("stat %s: %s", execname, strerror(errno));
+
+ if (userspec && sscanf(userspec, "%d", &user_id) != 1) {
+ struct passwd *pw;
+
+ pw = getpwnam(userspec);
+ if (!pw)
+ fatal("user `%s' not found\n", userspec);
+
+ user_id = pw->pw_uid;
+ }
+
+ if (changegroup && sscanf(changegroup, "%d", &runas_gid) != 1) {
+ struct group *gr = getgrnam(changegroup);
+ if (!gr)
+ fatal("group `%s' not found\n", changegroup);
+ runas_gid = gr->gr_gid;
+ }
+ if (changeuser && sscanf(changeuser, "%d", &runas_uid) != 1) {
+ struct passwd *pw = getpwnam(changeuser);
+ if (!pw)
+ fatal("user `%s' not found\n", changeuser);
+ runas_uid = pw->pw_uid;
+ if (changegroup == NULL) { /* pass the default group of this user */
+ changegroup = ""; /* just empty */
+ runas_gid = pw->pw_gid;
+ }
+ }
+
+ if (stop) {
+ int i = run_stop_schedule();
+ exit(i);
+ }
+
+ do_findprocs();
+
+ if (found) {
+ if (quietmode <= 0)
+ printf("%s already running.\n", execname ? execname : "process");
+ exit(exitnodo);
+ }
+ if (testmode) {
+ printf("Would start %s ", startas);
+ while (argc-- > 0)
+ printf("%s ", *argv++);
+ if (changeuser != NULL) {
+ printf(" (as user %s[%d]", changeuser, runas_uid);
+ if (changegroup != NULL)
+ printf(", and group %s[%d])", changegroup, runas_gid);
+ else
+ printf(")");
+ }
+ if (changeroot != NULL)
+ printf(" in directory %s", changeroot);
+ if (nicelevel)
+ printf(", and add %i to the priority", nicelevel);
+ printf(".\n");
+ exit(0);
+ }
+ if (quietmode < 0)
+ printf("Starting %s...\n", startas);
+ *--argv = startas;
+ if (background) { /* ok, we need to detach this process */
+ int i;
+ if (quietmode < 0)
+ printf("Detaching to start %s...", startas);
+ i = fork();
+ if (i<0) {
+ fatal("Unable to fork.\n");
+ }
+ if (i) { /* parent */
+ if (quietmode < 0)
+ printf("done.\n");
+ exit(0);
+ }
+ /* child continues here */
+
+#ifdef HAVE_TIOCNOTTY
+ tty_fd=open("/dev/tty", O_RDWR);
+#endif
+ devnull_fd=open("/dev/null", O_RDWR);
+ }
+ if (nicelevel) {
+ errno=0;
+ if ((nice(nicelevel)==-1) && (errno!=0))
+ fatal("Unable to alter nice level by %i: %s", nicelevel,
+ strerror(errno));
+ }
+ if (mpidfile && pidfile != NULL) { /* user wants _us_ to make the pidfile :) */
+ FILE *pidf = fopen(pidfile, "w");
+ pid_t pidt = getpid();
+ if (pidf == NULL)
+ fatal("Unable to open pidfile `%s' for writing: %s", pidfile,
+ strerror(errno));
+ fprintf(pidf, "%d\n", pidt);
+ fclose(pidf);
+ }
+ if (changeroot != NULL) {
+ if (chdir(changeroot) < 0)
+ fatal("Unable to chdir() to %s", changeroot);
+ if (chroot(changeroot) < 0)
+ fatal("Unable to chroot() to %s", changeroot);
+ }
+ if (chdir(changedir) < 0)
+ fatal("Unable to chdir() to %s", changedir);
+ if (changeuser != NULL) {
+ if (setgid(runas_gid))
+ fatal("Unable to set gid to %d", runas_gid);
+ if (initgroups(changeuser, runas_gid))
+ fatal("Unable to set initgroups() with gid %d", runas_gid);
+ if (setuid(runas_uid))
+ fatal("Unable to set uid to %s", changeuser);
+ }
+ if (background) { /* continue background setup */
+ int i;
+#ifdef HAVE_TIOCNOTTY
+ /* change tty */
+ ioctl(tty_fd, TIOCNOTTY, 0);
+ close(tty_fd);
+#endif
+ umask(022); /* set a default for dumb programs */
+ dup2(devnull_fd,0); /* stdin */
+ dup2(devnull_fd,1); /* stdout */
+ dup2(devnull_fd,2); /* stderr */
+#if defined(OShpux)
+ /* now close all extra fds */
+ for (i=sysconf(_SC_OPEN_MAX)-1; i>=3; --i) close(i);
+#else
+ /* now close all extra fds */
+ for (i=getdtablesize()-1; i>=3; --i) close(i);
+#endif
+
+ /* create a new session */
+#ifdef HAVE_SETSID
+ setsid();
+#else
+ setpgid(0,0);
+#endif
+ }
+
+#ifdef HAVE_SYS_CAPABILITY_H
+ if (caplist) {
+ remove_capabilities(caplist);
+ }
+#endif
+
+ execv(startas, argv);
+ fatal("Unable to start %s: %s", startas, strerror(errno));
+}
+
--- /dev/null
+#include <sys/signal.h>
+#include <unistd.h>
+#include <stdlib.h>
+
+int main() {
+ signal(SIGTERM, SIG_IGN);
+ while (1) sleep(20);
+ exit(0);
+}
--- /dev/null
+#!/bin/sh
+#
+# testd This shell script takes care of starting and stopping
+# testd (example daemon).
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# See how we were called.
+case "$1" in
+ start)
+ # Start daemons.
+ echo -n "Starting testd: "
+ testd &
+ echo
+ touch /var/lock/subsys/testd
+ ;;
+ stop)
+ # Stop daemons.
+ echo -n "Shutting down testd: "
+ killproc testd
+ echo
+ rm -f /var/lock/subsys/testd
+ ;;
+ status)
+ # Am I alive?
+ status testd
+ exit $?
+ ;;
+ restart)
+ echo -n "Shutting down testd: "
+ killproc testd
+ echo
+ echo -n "Starting testd: "
+ testd &
+ echo
+ ;;
+ *)
+ echo "Usage: testd {start|stop|status|restart}"
+ exit 1
+esac
+
+exit 0
--- /dev/null
+/*
+ * Copyright (c) 1997-2003 Red Hat, Inc. All rights reserved.
+ *
+ * This software may be freely redistributed under the terms of the GNU
+ * public license.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <alloca.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <limits.h>
+
+/* This will be running setuid root, so be careful! */
+static const char * safeEnviron[] = {
+ "PATH=/bin:/sbin:/usr/bin:/usr/sbin",
+ "HOME=/root",
+ NULL
+};
+
+#define FOUND_FALSE -1
+#define NOT_FOUND 0
+#define FOUND_TRUE 1
+
+#ifndef SBINDIR
+#define SBINDIR "/sbin"
+#endif
+
+static void
+usage(void) {
+ fprintf(stderr, "usage: usernetctl <interface-config> <up|down|report>\n");
+ exit(1);
+}
+
+static size_t
+testSafe(char *ifaceConfig, int fd) {
+ struct stat sb;
+
+ /* These shouldn't be symbolic links -- anal, but that's fine w/ mkj. */
+ if (fstat(fd, &sb)) {
+ fprintf(stderr, "failed to stat %s: %s\n", ifaceConfig,
+ strerror(errno));
+ exit(1);
+ }
+
+ /* Safety/sanity checks. */
+ if (!S_ISREG(sb.st_mode)) {
+ fprintf(stderr, "%s is not a normal file\n", ifaceConfig);
+ exit(1);
+ }
+
+ if (sb.st_uid) {
+ fprintf(stderr, "%s should be owned by root\n", ifaceConfig);
+ exit(1);
+ }
+
+ if (sb.st_mode & S_IWOTH) {
+ fprintf(stderr, "%s should not be world writeable\n", ifaceConfig);
+ exit(1);
+ }
+
+ return sb.st_size;
+}
+
+
+static int
+userCtl(char *file) {
+ char *buf;
+ char *contents = NULL;
+ char *chptr = NULL;
+ char *next = NULL;
+ int fd = -1, retval = NOT_FOUND;
+ size_t size = 0;
+
+ /* Open the file and then test it to see if we like it. This way
+ we avoid switcheroo attacks. */
+ if ((fd = open(file, O_RDONLY)) == -1) {
+ fprintf(stderr, "failed to open %s: %s\n", file, strerror(errno));
+ exit(1);
+ }
+
+ size = testSafe(file, fd);
+ if (size > INT_MAX) {
+ fprintf(stderr, "file %s is too big\n", file);
+ exit(1);
+ }
+
+ buf = contents = malloc(size + 2);
+ if (contents == NULL) {
+ fprintf(stderr, "failed to allocate memory\n");
+ exit(1);
+ }
+
+ if (read(fd, contents, size) != size) {
+ perror("error reading device configuration");
+ exit(1);
+ }
+ close(fd);
+
+ contents[size] = '\n';
+ contents[size + 1] = '\0';
+
+ /* Each pass parses a single line (until an answer is found), The contents
+ pointer itself points to the beginning of the current line. */
+ while (*contents) {
+ chptr = contents;
+ while (*chptr != '\n') chptr++;
+ next = chptr + 1;
+ while (chptr >= contents && isspace(*chptr)) chptr--;
+ *(++chptr) = '\0';
+
+ if (!strncasecmp(contents, "USERCTL=", 8)) {
+ contents += 8;
+ if ((contents[0] == '"' &&
+ contents[strlen(contents) - 1] == '"') ||
+ (contents[0] == '\'' &&
+ contents[strlen(contents) - 1] == '\''))
+ {
+ contents++;
+ contents[strlen(contents) - 1] = '\0';
+ }
+
+ if (!strcasecmp(contents, "yes") || !strcasecmp(contents, "true"))
+ retval = FOUND_TRUE;
+ else
+ retval = FOUND_FALSE;
+
+ break;
+ }
+
+ contents = next;
+ }
+
+ free(buf);
+
+ return retval;
+}
+
+int
+main(int argc, char ** argv) {
+ char * ifaceConfig;
+ char * chptr;
+ char * cmd = NULL;
+ int report = 0;
+ char tmp;
+
+ if (argc != 3) usage();
+
+ if (!strcmp(argv[2], "up")) {
+ cmd = SBINDIR "/ifup";
+ } else if (!strcmp(argv[2], "down")) {
+ cmd = SBINDIR "/ifdown";
+ } else if (!strcmp(argv[2], "report")) {
+ report = 1;
+ } else {
+ usage();
+ }
+
+ if (chdir("/etc/sysconfig/interfaces")) {
+ fprintf(stderr, "error switching to /etc/sysconfig/interfaces: "
+ "%s\n", strerror(errno));
+ exit(1);
+ }
+
+ /* force the interface configuration to be in the current directory */
+ chptr = ifaceConfig = argv[1];
+ while (*chptr) {
+ if (*chptr == '/')
+ ifaceConfig = chptr + 1;
+ chptr++;
+ }
+
+ /* automatically prepend "ifcfg-" if it is not specified */
+ if (strncmp(ifaceConfig, "ifcfg-", 6)) {
+ char *temp;
+ size_t len = strlen(ifaceConfig);
+
+ /* Make sure a wise guys hasn't tried an integer wrap-around or
+ stack overflow attack. There's no way it could refer to anything
+ bigger than the largest filename, so cut 'em off there. */
+ if (len > PATH_MAX)
+ exit(1);
+
+ temp = (char *) alloca(len + 7);
+ strcpy(temp, "ifcfg-");
+ /* strcat is safe because we got the length from strlen */
+ strcat(temp, ifaceConfig);
+ ifaceConfig = temp;
+ }
+
+ if(getuid() != 0)
+ switch (userCtl(ifaceConfig)) {
+ char *dash;
+
+ case NOT_FOUND:
+ /* a `-' will be found at least in "ifcfg-" */
+ dash = strrchr(ifaceConfig, '-');
+ if (*(dash-1) != 'g') {
+ /* This was a clone configuration; ask the parent config */
+ tmp = *dash;
+ *dash = '\0';
+ if (userCtl(ifaceConfig) == FOUND_TRUE) {
+ /* exit the switch; users are allowed to control */
+ *dash = tmp;
+ break;
+ }
+ *dash = tmp;
+ }
+ /* else fall through */
+ case FOUND_FALSE:
+ if (! report)
+ fprintf(stderr,
+ "Users are not allowed to control this interface.\n");
+ exit(1);
+ break;
+ }
+
+ /* looks good to me -- let's go for it if we are changing the interface,
+ * report good status to the user otherwise */
+
+ if (report)
+ exit(0);
+
+ /* pppd wants the real uid to be the same as the effective (god only
+ knows why when it works fine setuid out of the box) */
+ setuid(geteuid());
+
+ execle(cmd, cmd, ifaceConfig, NULL, safeEnviron);
+ fprintf(stderr, "exec of %s failed: %s\n", cmd, strerror(errno));
+
+ exit(1);
+}
--- /dev/null
+/*
+ * usleep.c Sleep for the specified number of microseconds
+ *
+ * Usage: usleep [ microseconds ]
+ *
+ * Copyright 2001 Werner Fink, 2001 SuSE GmbH Nuernberg, Germany.
+ * Copyright 2005 Werner Fink, 2005 SUSE LINUX Products GmbH, Germany.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Werner Fink <werner@suse.de>
+ */
+
+#ifndef __USE_STRING_INLINES
+# define __USE_STRING_INLINES
+#endif
+#ifdef __NO_STRING_INLINES
+# undef __NO_STRING_INLINES
+#endif
+#include <libgen.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#ifdef _POSIX_PRIORITY_SCHEDULING
+# include <sched.h>
+#endif
+#define USAGE "Usage:\t%s [ microseconds ]\n", we_are
+
+static char *we_are;
+int main(int argc, char **argv)
+{
+ unsigned long int usec = 1;
+
+ if (argc > 2)
+ goto err;
+
+ if (argc > 1) {
+ char *endptr;
+ usec = strtoul(argv[1], &endptr, 10);
+ if (*endptr != '\0')
+ goto err;
+ }
+
+ if (usec)
+ usleep(usec);
+#ifdef _POSIX_PRIORITY_SCHEDULING
+ else
+ (void)sched_yield();
+#endif
+ _exit(0);
+
+ /* Do this at the end for speed */
+err:
+ we_are = basename(argv[0]);
+ fprintf(stderr, USAGE);
+
+ if (argc > 1 && *(argv[1]) == '-') {
+ argv[1]++;
+ if (!strcmp(argv[1], "-help") || *(argv[1]) == 'h' || *(argv[1]) == '?') {
+ fprintf(stderr, "Sleep for the specified number of microseconds.\n\n");
+ fprintf(stderr, "Help options:\n");
+ fprintf(stderr, " -h, -?, --help display this help and exit.\n");
+ exit (0);
+ }
+ }
+ exit (1);
+}
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = interfaces hwprofiles cpusets
+
+sysconfigdir = @sysconfigdir@
+
+sysconfig_DATA = \
+ init-colors \
+ hwprof \
+ system \
+ network \
+ static-routes \
+ static-routes6 \
+ static-nat \
+ static-arp \
+ i18n
+
+noinst_DATA = \
+ init-colors.gentoo
+
+EXTRA_DIST = $(sysconfig_DATA) $(noinst_DATA)
--- /dev/null
+@SET_MAKE@
+
+cpusetsdir = @sysconfigdir@/cpusets
+
+cpusets_DATA = cpuset-test
+
+EXTRA_DIST = $(cpusets_DATA)
--- /dev/null
+# Name of the cpuset
+NAME=test
+
+# list of CPUs in that cpuset
+CPUS=1-2
+
+# list of Memory Nodes in that cpuset
+MEMS=1-2
+
+# If a cpuset is cpu or mem exclusive, no other cpuset, other than a direct
+# ancestor or descendent, may share any of the same CPUs or Memory Nodes.
+
+# is cpu placement exclusive?
+CPU_EXCLUSIVE=1
+
+# is memory placement exclusive?
+MEM_EXCLUSIVE=1
+
+#
+#NOTIFY_ON_RELEASE=0
+
+# PIDs of tasks in this cpuset
+#TASKS=
+
+ONBOOT=no
--- /dev/null
+# Hardware Profiles configuration
+
+# Ask for profile if not found
+ASKFORPROFILE=no
--- /dev/null
+@SET_MAKE@
+
+hwprofilesdir = @sysconfigdir@/hwprofiles
+
+noinst_DATA = files
+
+EXTRA_DIST = $(noinst_DATA)
--- /dev/null
+/etc/cups/ppd/*
+/etc/cups/printers.conf
+/etc/sysconfig/interfaces/ifcfg-eth0
+/etc/X11/XF86Config
+/etc/X11/xorg.conf
+/etc/sysconfig/system
+/etc/sysconfig/network
+/etc/sysconfig/mouse
+/etc/hosts
+/etc/resolv.conf
+/etc/modules.conf
+/etc/modules
+/etc/printcap
+/etc/fstab
+/etc/sysconfig/fbset
--- /dev/null
+
+# NOTE: Do not use expressions here, systemd does not expand them:
+# LANG="${LANG:-en_US.UTF-8}"
+#
+#LANG=en_US.UTF-8
+#LANG=pl_PL.UTF-8
+
+# list of locales to build if glibc-localedb-all package is not installed
+# enable, install "localedb-src" package and execute "localedb-gen"
+#SUPPORTED_LOCALES="C.UTF-8/UTF-8 en_US.UTF-8/UTF-8 en_US/ISO-8859-1"
--- /dev/null
+# Default PLD Linux colors.
+
+CBRACKETS="$CYAN" # brackets [ ] color
+CDONE="$GREEN" # DONE and WORK color
+CBUSY="$MAGENTA" # BUSY color
+CFAIL="$RED" # FAIL and DIED color
+CPOWEREDBY="$CYAN" # "Powered by" color
+CPLD="$GREEN" # "PLD Linux Distribution" color
+CI="$RED" # Capital I color (press I to enter interactive startup)
+CRESMAN="$GREEN" # "Resource Manager" color
+CHARS="" # Characters displayed on the beginning of show line
+CCHARS="$NORMAL" # Color of these characters (look at /usr/share/doc/rc-scripts-*/init-colors.gentoo.gz example)
--- /dev/null
+# Gentoo colors, copy this file as: /etc/sysconfig/init-colors
+
+CBRACKETS="$BLUE $BOLD" # brackets [ ] color
+CDONE="$GREEN $BOLD" # DONE and WORK color
+CBUSY="$MAGENTA $BOLD" # BUSY color
+CFAIL="$RED $BOLD" # FAIL and DIED color
+CPOWEREDBY="$BLUE $BOLD" # "Powered by" color
+CPLD="$GREEN $BOLD" # "PLD Linux Distribution" color
+CI="$RED $BOLD" # Capital I color (press I to enter interactive startup)
+CRESMAN="$GREEN $BOLD" # "Resource Manager" color
+CHARS=" * " # Characters displayed on the beginning of show line
+CCHARS="$GREEN $BOLD" # Color of these characters
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = data up.d down.d
+
+interfacesdir = @sysconfigdir@/interfaces
+
+interfaces_DATA = ifcfg-eth0
+
+noinst_DATA = \
+ ifcfg-br0 \
+ ifcfg-description \
+ ifcfg-eth0.1 \
+ ifcfg-irda0 \
+ ifcfg-irlan0 \
+ ifcfg-ppp0.pppoe \
+ ifcfg-ppp0.kou \
+ ifcfg-ppp0.callback \
+ ifcfg-ppp0.eagle-usb-neostrada \
+ ifcfg-ppp0.gprs-idea \
+ ifcfg-ppp0.gprs-plusgsm \
+ ifcfg-ppp0.leased1 \
+ ifcfg-ppp0.leased2 \
+ ifcfg-ppp0.speedtouch-neostrada \
+ ifcfg-ppp0.tpsa \
+ ifcfg-ppp0.ueagle-neostrada \
+ ifcfg-ppp0.ueagle4-neostrada \
+ ifcfg-sl0 \
+ tnlcfg-description \
+ tnlcfg-icm
+
+
+EXTRA_DIST = $(interfaces_DATA) $(noinst_DATA)
--- /dev/null
+@SET_MAKE@
+
+interfacesdatadir = @sysconfigdir@/interfaces/data
+
+interfacesdata_DATA =
+
+noinst_DATA = \
+ chat-ppp0.kou \
+ chat-ppp0.kou-disconnect \
+ chat-ppp0.callback \
+ chat-ppp0.leased1 \
+ chat-ppp0.tpsa \
+ chat-ppp0.gprs-plusgsm
+
+EXTRA_DIST = $(interfacesdata_DATA) $(noinst_DATA)
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# Script for dialing to host with 'modem level' callback serurity enabled
+# as performed by USRobotics Courier modem
+ABORT BUSY
+ABORT NO\\sDIAL
+ABORT NO\\sCARRIER
+TIMEOUT 60
+'' atz
+OK $INITSTRING
+OK atdt $PHONE
+CONNECT \\c
+\)? $CBPASSWORD
+umber $CBPHONE
+HANGUP OFF
+CLR_ABORT NO\\sCARRIER
+NO\\sCARRIER \\c
+TIMEOUT 120
+RING ATA
+ABORT NO\\sCARRIER
+CONNECT \\c
+HANGUP ON
+ogin: $USER
+assword: $PASSWORD
--- /dev/null
+ABORT BUSY
+ABORT ERROR
+ABORT "NO CARRIER"
+"" AT
+OK $INITSTRING
+OK-AT-OK ATD"$PHONE"
+CONNECT
--- /dev/null
+TIMEOUT 10
+ABORT 'BUSY'
+ABORT 'NO ANSWER'
+ABORT 'ERROR'
+"" ATZ
+OK 'AT+CGDCONT=1,"IP","","0.0.0.0",0,0;+CGQMIN=1,0,0, 0,0,0;+CGQREQ=1,0,0,0,0,0;+CGEQREQ=1,4,0,0,0,0,2,0 ,"0E0","0E0",3,0,0;+CGEQMIN=1,3,0,0,0,0,0,0,"0E0", "0E0",2,0,0'
+ABORT 'NO CARRIER'
+OK 'ATDT*99#'
+
+CONNECT ''
--- /dev/null
+ABORT "BUSY"
+ABORT "ERROR"
+ABORT "NO CARRIER"
+ABORT "NO DIALTONE"
+ABORT "NO ANSWER"
+ABORT "Username/Password Incorrect"
+"" ATZ
+OK AT+CGDCONT=1,"IP","www.plusgsm.pl","",0,0
+OK "ATD*99***1#"
+CONNECT ''
--- /dev/null
+ABORT BUSY
+ABORT ERROR
+ABORT 'NO CARRIER'
+
+TIMEOUT 60
+
+'' ATZ
+OK ATDT#777
--- /dev/null
+ABORT BUSY
+ABORT ERROR
+ABORT 'NO CARRIER'
+ABORT 'NO DIALTONE'
+SAY "\nSending interruption to CDMA modem\n"
+"" "\K"
+"" "+++ATH"
+SAY "\nCDMA connection interrupted\n"
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# chat script for setting up hardwired (leased) serial line.
+# refer to ifcfg-ppp0.leased1 for more info
+REPORT CONNECT
+ABORT 'NO CARRIER'
+'' \\r$INITSTRING
+OK ''
+CONNECT
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# Script for dialing in to Public Internet Access by TPSA (0202122)
+
+ABORT BUSY
+ABORT NO\\sDIAL
+ABORT NO\\sCARRIER
+TIMEOUT 60
+'' atz
+OK $INITSTRING
+OK atdt$PHONE
+CONNECT \\c
+ame: $USER
+ord: $PASSWORD
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = all ip ipx ppp tnl
--- /dev/null
+@SET_MAKE@
+
+alldowndir= @downdir@/all
+
+alldown_SCRIPTS =
+noinst_SCRIPTS = thetouch
+
+EXTRA_DIST = $(alldown_SCRIPTS) $(noinst_SCRIPTS)
--- /dev/null
+#! /bin/sh
+# This script will run every time some interface will go down
+# using ifup or ifdown.
+#
+
--- /dev/null
+@SET_MAKE@
+
+ipdowndir = @downdir@/ip
+
+ipdown_SCRIPTS =
+
+EXTRA_DIST = $(ipdown_SCRIPTS)
--- /dev/null
+@SET_MAKE@
+
+ipxdowndir = @downdir@/ipx
+
+ipxdown_SCRIPTS =
+
+EXTRA_DIST = $(ipxdown_SCRIPTS)
--- /dev/null
+@SET_MAKE@
+
+pppdowndir= @downdir@/ppp
+
+pppdown_SCRIPTS = logger
+
+EXTRA_DIST = $(pppdown_SCRIPTS)
--- /dev/null
+#!/bin/sh
+# You can put here anything :)
+#
+echo " Disconnect time: $(date) from $PPP_REMOTE " >> /var/log/ppp.log
+echo "+---------------------------------------------------------------+" >> /var/log/ppp.log
--- /dev/null
+@SET_MAKE@
+
+tnldowndir = @downdir@/tnl
+
+tnldown_SCRIPTS =
+
+EXTRA_DIST = $(tnldown_SCRIPTS)
--- /dev/null
+# bonding setup
+
+# filename: ifcfg-bond0
+DEVICE=bond0
+IPADDR=192.168.0.1/24
+IPADDR1=10.10.0.1/21
+BOOTPROTO=none
+ONBOOT=yes
+
+# additionally create ifcfg-eth0 and ifcfg-eth1 as:
+# filename: ifcfg-eth0
+#DEVICE=eth0
+#SLAVE=yes
+#MASTER=bond0
+#BOOTPROTO=none
+#ONBOOT=yes
+
+# filename: ifcfg-eth1
+#DEVICE=eth1
+#SLAVE=yes
+#MASTER=bond0
+#BOOTPROTO=none
+#ONBOOT=yes
--- /dev/null
+#
+DEVICE=br0
+IPADDR=195.164.211.2
+ONBOOT=yes
+BRIDGE_DEVS="eth0 eth1"
+SPANNING_TREE=yes
--- /dev/null
+
+DEVICE=<name>
+
+[ BOOTPRIO=number ]
+ ifcfg-* interfaces are configured in BOOTPRIO order starting
+ from lowest value first. You need to set BOOTPRIO in _all_ your
+ ifcfg* files because if you won't do that only these interfaces
+ with BOOTPRIO variable will be configured. Use the same schema
+ when setting variable for example BOOTPRIO=number
+ or BOOTPRIO="number" because sorting is done by sort command.
+
+[ BOOTPROTO={none|bootp|dhcp|pump} ]
+ You can specify which dhcp client to use with the DHCP_CLIENT, if
+ the DHCP_CLIENT is not specified we trying to launch in order :
+ /sbin/dhcpcd
+ /sbin/dhclient
+ /sbin/dhcpxd
+ /sbin/pump
+ if you have a preferred client define the DHCP_CLIENT variable.
+ You can also pass some options to dhcp client via DHCP_OPTIONS.
+
+[ BOOTPROTO6={none|dhcp6|v4compat}
+ dhcp6 isn't supported, yet.
+ v4compat uses available IPv4 addresses (ie. from DHCPv4)
+ and then convert them to IPv6 (IPv4-compatible) to use with
+ automatic tunnels
+
+
+IPADDR="(IPv4 or IPv6 address)/prefix"
+IP_AOPTS="broadcast xxx etc" (by default broadcast is autocalculated)
+IP_ROPTS=""
+IP_LABEL=""
+
+IPADDR1=
+IP_AOPTS1= options for ip addr add
+IP_ROPTS1= options for ip route add (currently used only for IP4_PRIM_IF)
+IP_LABEL1= IPv6 address label as per RFC 3484 (ip addrlabel ...)
+
+IP4_PRIM_IF="1" # number of primary IPv4 interface (IPADDRx)
+IP4_SRC_IF="1" # number of IPv4 address for ip's ,,src'' parameter
+IP6_PRIM_IF="" #
+
+[ ONBOOT={no|yes} ]
+[ HOTPLUG={no|yes} ] - bring up from hotplug (udev for example) (default to no)
+[ MULTICAST={|no|yes} ] - for eth automatically set to yes
+[ ARP={no|yes} ] - for eth automatically set to yes
+[ IPV6_DISABLE_AUTOCONF={yes|no} ] - disable IPv6 autoconfiguration
+
+[ IPX=yes|no ]
+if IPX=yes ; then
+
+ IPXNETNUM_{802_2,802_2TR,802_3,EtherII,SNAP}
+ IPXPRIMARY_{802_2,802_2TR,802_3,EtherII,SNAP}=yes|no
+ IPXACTIVE_{802_2,802_2TR,802_3,EtherII,SNAP}=yes|no
+fi
+
+[ MTU= ]
+[ METRIC= ]
+[ PROXYARP={yes|no} ]
+
+QDISC=[sfq|teql0|red|prio|...] (queueing discipline)
+QDISC_CLASS=[htb|cbq|none] (use cbq|htb as class based discipline;
+ if none specified and bandwidth_out present
+ then tbf is used)
+BANDWIDTH_IN=[upstream limit in kilobites, supported on 2.4 only]
+BANDWIDTH_OUT=[downstream limit in kilobites]
+
+VLAN_REORDER_HDR=[0|1] When this is set, the VLAN device will move the
+ ethernet header around to make it look exactly like a
+ real ethernet device. This may help programs such
+ as DHCPd which read the raw ethernet packet and
+ make assumptions about the location of bytes.
+ If you don't need it, don't turn it on, because there
+ will be at least a small performance degradation.
+ Default is ON.
+
+[ VLAN_GVRP=yes|no ] Enable GVRP.
+
+[ DEFAULTHANDLING=yes|no ] (used in configuration for ATM interfaces,
+ obsolete variable)
+[ HANDLING=0|1|2|3 ] (0 is default; used ie. in ATM configuration, for
+ details see ifup script)
+
+if DEVICE=eth*; then
+
+ [ MEDIA={auto|10baseT|10base2|AUI} ]
+ [ MACADDR=<hw address> ]
+
+ if macvlan
+ MACVLAN_DEV=<exitsting base interface eg. eth0>
+ MACVLAN_MACADDR=<desired hw address of new interface>
+ fi
+
+
+ if DEVICE=wireless interface (man iwconfig(8))
+ WLAN_UPEARLY=<yes>|<no> Up device before setting any WLAN parameters
+ (needed for some drivers)
+ WLAN_ESSID=<ESSID or Network Name (Domain ID)>|any|off
+ WLAN_NWID=<Network ID (Domain ID)>|off
+ WLAN_FREQ=<frequency> (2.422G)
+ WLAN_CHANNEL=<channel number> (3)
+ WLAN_SENS=<the sensitivity threshold>
+ WLAN_MODE=ad-hoc|managed|master|repeater|secondary|auto
+ WLAN_AP=<Access Point address>|any|auto|off
+ WLAN_NICKNAME=<station nickname)
+ WLAN_BITRATE=<bitrate like 11M>|auto|fixed
+ WLAN_RTS_THRESHOLD=<rts/cts threshold>|auto|fixed|off
+ WLAN_FRAGMENTATION_THRESHOLD=<frag threshold>|auto|fixed|off
+ WLAN_KEY=XXXX-XXXX-XXXX-XXXX|XXXXXXXX|s:<ascii string>
+ if WLAN_KEY; then
+ WLAN_KEY_1=... <optional>
+ WLAN_KEY_2=... <optional>
+ WLAN_KEY_3=... <optional>
+ WLAN_KEY_4=... <optional>
+ WLAN_KEY_CURRENT=index <optional>
+ fi
+ WLAN_ENCRYPTION=on|off|open|restricted
+ WLAN_POWER=period <value>|timeout <value>|on|off|all|unicast|multicast
+ WLAN_TXPOWER=<power in dBm>|<power in mW>mW|auto|on|off
+ WLAN_RETRY=limit <value>|lifetime <value>
+ WLAN_COMMIT=yes|no (some cards require manual commit of changes)
+ if WLAN_WPA=yes; then
+ WLAN_WPA_WAIT_TIMEOUT=<wait max x sec for wpa_suplicant>
+ WLAN_WPA_DRIVER=<driver: see -D option of wpa_supplicant; default is wext>
+ WLAN_WPA_CONFIG=<path to wpa_supplicant config file>
+ WLAN_WPA_OPTIONS=[additional wpa_supplicant options]
+ fi
+ fi
+
+elif DEVICE=ppp* || DEVICE=sl* ; then
+
+ PERSIST=yes|no
+ MODEMPORT=<device, say /dev/modem>
+ LINESPEED=<speed, say 115200>
+ DEFABORT=yes|no
+ DIRECT_CONNECT=yes|no (direct connection without chat/wvdial used for example
+ on SDI or leased lines)
+
+ if DEVICE=ppp* ; then
+
+ AUTH=yes|no
+ PEERDNS=yes|no
+ DEFROUTE=yes|no
+ ESCAPECHARS=yes|no
+ SYNC=yes|no (yes implies "sync" option)
+ HOLDOFF=30
+ HARDFLOWCTL=yes|no (yes implies "modem crtscts" options)
+ PPPOPTIONS=<arbitrary option string>
+ PAPNAME=<"name $PAPNAME" on pppd command line>
+ REMIP=<remote ip4 address, normally unspecified>
+ REMIP6=<remote ip6 address, normally unspecified>
+ MRU=
+ DISCONNECTTIMEOUT=<number of seconds, default currently 5>
+ RETRYTIMEOUT=<number of seconds, default currently 60>
+ INITSCRIPT=<modem command>
+ DATAFORCHAT=<list of variables>
+ <anything>=<anything> (for chat script)
+ IPV6_PPP=yes|no (use IPv6 for ppp ?)
+ if IPV6_PPP = yes ; then
+ IPV6_CP_USEV4=yes|no (use local IPv4 mapped addresses
+ as IPv6 addresses)
+ IPV6_CP_PERSISTENT=yes|no (use EUI-48 addresses
+ as IPv6 addresses; not
+ supported on Linux, yet)
+ or by default use address specified by IP6_PRIM_IF
+ and REMIP6
+ fi
+ PPPOA=yes|no (generic PPP over ATM)
+ if PPPOA = yes ; then
+ PPPOA_VPI=<VPI number>
+ PPPOA_VCI=<VCI number>
+ fi
+ PPPOE_DEV=<ethX> (PPP over Ethernet device)
+ if PPPOE_DEV exists ; then
+ PPPOE_KERNEL=yes|no (use or not kernel space PPPoE support)
+ PPPOE_OPT=<options> (used only with userspace pppoe program)
+ fi
+ PPPOA_EAGLE=yes|no (eagle-usb support)
+ if PPPOA_EAGLE = yes ; then
+ PPPOA_OPT=<options> (used only with userspace pppoa program)
+ fi
+ PPPOA_SPEEDTOUCH=yes|no (speedtouch support)
+ if PPPOA_SPEEDTOUCH = yes ; then
+ PPPOA_KERNEL=yes|no (use or not kernel space PPPoA support)
+ PPPOA_VPI=<VPI number>
+ PPPOA_VCI=<VCI number>
+ PPPOA_OPT=<options> (used only with userspace pppoa program)
+ fi
+ UNIT=yes|no (pass unit option to pppd (depends on DEVICE name)
+ defaults to yes)
+ WVDIALSECT= (section in wvdial config maybe)
+ fi
+
+ if DEVICE=sl* ; then (SLIP)
+ PROTOCOL=slip|cslip|adaptive
+ REMIP=<remote ip4 address>
+ REMIP6=<remote ip6 address, normally unspecified>
+ fi
+
+elif DEVICE=br* ; then /* Bridge */
+
+ BRIDGE_DEVS=<list of devices betwen which do bridging>
+ Note: separation configuration for devices in this list
+ should be avoided !
+ AGEING=<ethernet (MAC) address ageing time in seconds>
+ GCINT=<garbage collection interval time for the bridge in seconds>
+
+ SPANNING_TREE=yes|no (enable SPT - Spanning Tree Protocol)
+ if SPANNING_TREE=yes ; then
+ BRIDGEPRIO=<bridge's priority; 0-65535; less == better>
+ FD=<bridge forward delay time in seconds>
+ HELLO=<bridge hello time in seconds>
+ MAXAGE=<maximum message age in seconds>
+ PATHCOST_PORT=<port number>
+ PATHCOST=<cost of the port specified in PATHCOST_PORT>
+ Note: both PATHCOST_PORT and PATHCOST must be
+ specified to set cost of port
+ PORTPRIO_PORT=<port>
+ PORTPRIO=<port priority used by port selection algorithms;
+ a number between 0 and 255>
+ Note: see note above
+ fi
+elif DEVICE=irda* ; then /* IrDA */
+
+ IRDAPORT=<device, say /dev/ttyS1>
+ DONGLE=<driver, see README.irattach from irda-utils package>
+ DISCOVERY=yes|no (starts discovery of remote IrDA devices)
+fi
+
+# You can also run some other programs *after* device has been brought up or down.
+# Just create functions run_up() and run_down().
+run_up()
+{
+ echo "This will be executed after device is brought up!"
+}
+
+run_down()
+{
+ echo "This will be executed after device is brought down!"
+}
--- /dev/null
+# Config for Ethernet card.
+#
+
+# Name of the device. Must match filename suffix.
+DEVICE=eth0
+
+# IP addresses/address prefix
+# where prefix:
+# 24 - resembles netmask 255.255.255.0
+# 16 - resembles netmask 255.255.0.0
+# etc.
+# IPADDR may be either IPv4 or IPv6
+# you may have up to 256 addresses set up
+#IPADDR=192.168.0.1/24
+#IPADDR1=192.168.0.2/24
+#IPADDR2=192.168.0.3/24
+#IPADDR3=192.168.0.4/24
+
+# you may select which of the above addresses
+# is primary for this interface (it'd be IPADDR1 in the example below)
+#IP4_PRIM_IF="1"
+
+# activate on boot? yes|no
+# you must set it to 'yes' if you want to have this up after bootup
+ONBOOT=yes
+
+# dhcp|pump|none
+BOOTPROTO=dhcp
+
+# pass parameters to dhcp client
+#DHCP_OPTIONS="-R"
+
+# sane qdisc
+QDISC=sfq
+
+# configure a 6to4 tunnel?
+#ENABLE_6TO4=yes
+
+# ethtool options like WoL
+#ETHTOOL_OPTS="wol g"
--- /dev/null
+# VLAN device
+#
+
+DEVICE=eth0.1
+IPADDR1=192.168.0.2/32
+IPADDR2=3ffe:bbb:ccc:ddd::5/64
+IP4_PRIM_IF=1
+MUTLICAST=no
+ONBOOT=yes
--- /dev/null
+# Read /usr/share/doc/irda-utils-*/README.irattach.gz for more
+# informations about options below.
+#
+DEVICE=irda0
+IPADDR=192.168.0.10
+ONBOOT=yes
+IRDAPORT=/dev/ttyS1
+DONGLE=esi
+DISCOVERY=yes
+
--- /dev/null
+# alias irlan0 irlan
+#
+DEVICE=irlan0
+BOOTPROTO=dhcp
+ONBOOT=yes
--- /dev/null
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.callback
+ONBOOT=no
+HARDFLOWCTL=yes
+MODEMPORT=/dev/ttyS1
+LINESPEED=115200
+DEBUG=yes
+PERSIST=no
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+PHONE=phone
+INITSTRING=ATe0s2=255
+#CBPASSWORD and CBPHONE is ysed (by me) in callback.
+#see included chat-ppp0 for example of
+#"modem level" callback (on USRobotics Courier)
+CBPASSWORD=cbpassword
+CBPHONE=myphone
+USER=user
+PASSWORD=password
+DATAFORCHAT="CBPASSWORD CBPHONE PHONE USER PASSWORD INITSTRING"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+#
+DEVICE=ppp0
+ONBOOT=yes
+PPPOA_EAGLE=yes
+AUTH=no
+MTU=1452
+PERSIST=yes
+DEFROUTE=yes
+USEPEERDNS=yes
+PAPNAME=XXX@neostrada.pl
+# put password in /etc/ppp/pap-secrets or install
+# ppp-plugin-ifcfg-password and uncommend following lines
+# PLUGIN_IFCFG_PASSWORD=yes
+# PASSWORD=YYYY
--- /dev/null
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.gprs-idea
+ONBOOT=no
+HARDFLOWCTL=no
+# ircomm0 for IRDA, rfcomm0 for BlueTooth
+MODEMPORT=/dev/ircomm0
+# MODEMPORT=/dev/bluetooth/rfcomm/0
+LINESPEED=115200
+AUTH=no
+DEBUG=yes
+DEFROUTE=yes
+PERSIST=yes
+HOLDOFF=1
+MTU=296
+#demand option not finished yet ;-(
+DEMAND=no
+PHONE='*99***1#'
+#or
+#PHONE='*99#'
+USER=idea
+PASSWORD=idea
+INITSTRING='AT+CGDCONT=1,"IP","www.idea.pl","",0,0'
+DATAFORCHAT="USER PASSWORD INITSTRING PHONE"
+PPPOPTIONS="noipdefault noproxyarp lcp-echo-failure 0 lcp-echo-interval 0 local"
+PLUGIN_IFCFG_PASSWORD=yes
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/chat-ppp0.gprs-playmobile
+ONBOOT=no
+HARDFLOWCTL=no
+# ttyUSB0 or tts/USB0 for USB modems, ircomm0 for IRDA, rfcomm0 for BlueTooth
+MODEMPORT=/dev/ttyUSB0
+# MODEMPORT=/dev/bluetooth/rfcomm/0
+LINESPEED=115200
+AUTH=no
+DEBUG=yes
+DEFROUTE=yes
+PERSIST=yes
+HOLDOFF=1
+#MTU=296
+#demand option not finished yet ;-(
+DEMAND=no
+PHONE='*99***1#'
+#or
+#PHONE='*99#'
+INITSTRING='AT+CGDCONT=1,"IP","","0.0.0.0",0,0;+CGQMIN=1,0,0, 0,0,0;+CGQREQ=1,0,0,0,0,0;+CGEQREQ=1,4,0,0,0,0,2,0 ,"0E0","0E0",3,0,0;+CGEQMIN=1,3,0,0,0,0,0,0,"0E0", "0E0",2,0,0'
+DATAFORCHAT="INITSTRING PHONE"
+PPPOPTIONS="noipdefault noproxyarp lcp-echo-failure 0 lcp-echo-interval 0 local"
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0
+ONBOOT=no
+HARDFLOWCTL=yes
+# ircomm0 for IRDA, rfcomm0 for BlueTooth
+MODEMPORT=/dev/ircomm0
+LINESPEED=115200
+AUTH=no
+#QDISC="sfq quantum 1500b perturb 5"
+DEBUG=yes
+DEFROUTE=yes
+PERSIST=no
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+PHONE='*99***1#'
+USER=plusgsm
+PASSWORD=plusgsm
+INITSTRING='AT+CGDCONT=1,"IP","www.plusgsm.pl","",0,0'
+DATAFORCHAT="USER PASSWORD INITSTRING PHONE"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+
+DEVICE=ppp0
+
+MODEMPORT=/dev/tts/USB0
+LINESPEED=460800
+
+# Your ESN of the device.
+# You should also add to chap secrets a line:
+# ESN * "cdma" *
+PAPNAME=#ESN
+
+ONBOOT=yes
+AUTH=no
+PERSIST=yes
+DEFROUTE=yes
+USEPEERDNS=yes
+DEBUG=no
+
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.kou
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# config file for setting up hardwired (leased) serial line.
+# This configuration uses chats with modem, so You have to have an inteligent
+# modem (AT commands compatible).
+# But You can monitor connection speed.
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.leased1
+ONBOOT=yes
+IPADDR=192.168.255.254/30
+REMIP=192.168.255.253
+HARDFLOWCTL=yes
+MODEMPORT=/dev/ttyS1
+LINESPEED=115200
+DEBUG=no
+PERSIST=yes
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+# one end is "calling"
+INITSTRING="ATs0=0&l1"
+# while other is "receiving"
+#INITSTRING="ATs0=1&l1"
+#if your modem doesn't support AT&L1 command try with ATD on one side
+#and ATA on the other.
+DATAFORCHAT="INITSTRING"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# config file for setting up hardwired (leased) serial line.
+# This config assumes "transparent" modem (in ex. goramo), null modem
+# cable or current loop.
+# Advantage is smaller logfiles and slower 'pid spinning' (no chat is
+# executed)
+# You can configure Your AT Hayes compatibile modem to transparent mode
+# using ATS0=0&L1&S5&W on master "calling" side and ATS0=1&L1&S5&W on
+# slave "reciving" side
+# Note: After commiting last &W You won't be able to talk to Your modem
+# until You reset it to factory defaults using some jumper.
+# if You don't have any jumper YOU HAVE BEEN WARNED.
+#
+DEVICE=ppp0
+ONBOOT=yes
+IPADDR=192.168.255.254/30
+REMIP=192.168.255.253
+HARDFLOWCTL=yes
+MODEMPORT=/dev/ttyS1
+LINESPEED=115200
+DEBUG=no
+PERSIST=yes
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+# name of the device
+DEVICE=ppp0
+
+# add the password in /etc/ppp/chap-secrets
+PAPNAME=adslusername
+
+AUTH=no
+IPV6_PPP=no
+PPPOE_DEV=eth1
+PPPOE_KERNEL=yes
+#PPPOE_OPTS="persist"
+HARDFLOWCTL=yes
+DEBUG=no
+PERSIST=no
+HOLDOFF=10
+DEMAND=no
+DEFROUTE=yes
+PEERDNS=yes
+
+# you may select which of the above addresses
+# is primary for this interface (it'd be IPADDR1 in the example below)
+#IP4_PRIM_IF="1"
+
+# activate on boot? yes|no
+# you must set it to 'yes' if you want to have this up after bootup
+ONBOOT=yes
+
+# dhcp|pump|none
+BOOTPROTO=none
--- /dev/null
+#
+DEVICE=ppp0
+ONBOOT=yes
+PPPOA_SPEEDTOUCH=yes
+PPPOA_KERNEL=yes
+PPPOA_VPI=0
+PPPOA_VCI=35
+
+# If using kernel mode, make sure /lib/firmware/speedtch-{1,2}.bin exists
+# and don't define this variable.
+# Preferably, build speedtouch-firmware from CVS.
+#PPPOA_FIRMWARE="/usr/share/speedtouch/mgmt.o"
+
+AUTH=no
+#MTU=1452
+PERSIST=yes
+DEFROUTE=yes
+USEPEERDNS=yes
+#PAPNAME="rejestracja@neostrada.pl"
+PAPNAME="XXX@neostrada.pl"
+# put password in /etc/ppp/pap-secrets or install
+# ppp-plugin-ifcfg-password and uncommend following lines
+# PLUGIN_IFCFG_PASSWORD=yes
+# PASSWORD="YYYY"
--- /dev/null
+#
+DEVICE=ppp0
+CHATSCRIPT=/etc/sysconfig/interfaces/data/chat-ppp0.tpsa
+ONBOOT=no
+HARDFLOWCTL=yes
+MODEMPORT=/dev/ttyS1
+LINESPEED=115200
+AUTH=no
+QDISC="sfq quantum 1500b perturb 5"
+DEBUG=yes
+PERSIST=no
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+PHONE=0w202122
+USER=ppp
+PASSWORD=ppp
+INITSTRING=ATe0s2=255
+DATAFORCHAT="USER PASSWORD INITSTRING PHONE"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+#
+DEVICE="ppp0"
+PERSIST="yes"
+USER="XXXXXXXXXXXXXX@neostrada.pl"
+ONBOOT="no"
+
+PERSIST=yes
+DEFROUTE=yes
+USEPEERDNS=yes
+AUTH=no
+MTU=1452
+DEBUG=yes
+MAXFAIL=0
+
+PPPOA=yes
+PPPOA_VPI=0
+PPPOA_VCI=35
--- /dev/null
+#
+DEVICE="ppp0"
+ONBOOT="no"
+
+PAPNAME="xxxxxxx@neostrada.pl"
+
+HARDFLOWCTL=no
+DEFROUTE=yes
+USEPEERDNS=yes
+AUTH=no
+#MTU=1452
+SYNC=yes
+
+PPPOA=yes
+PPPOA_VPI=0
+PPPOA_VCI=35
+
+PERSIST=yes
+MAXFAIL=0
+HOLDOFF=4
+
+PPPOPTIONS="noipdefault noaccomp nopcomp noccp"
+
+DEBUG=yes
--- /dev/null
+#
+DEVICE=sl0
+IPADDR=195.164.211.2
+ONBOOT=yes
+MODEMPORT=/dev/ttyS0
+LINESPEED=57600
+REMIP=194.181.19.1
+MTU=296
+PROTOCOL=slip
+# say no for dip && modem connection
+# say yes for direct connection to for example router via slattach
+DIRECT_CONNECT=yes
--- /dev/null
+#
+# In this file you can also put all configuration data instead
+# of using second file named ifcfg-tunnel_name.
+
+MODE={ipip|gre|sit|ipxip}
+ONBOOT=yes|no
+DEVICE=<device name>
+if MODE=ipxip ; then
+ ?
+elif MODE=ipip || MODE=gre || MODE=sit ; then
+
+ REMOTEADDR=<IPv4 addres>
+ [ LOCALADDR=<IPv4 addres> ]
+ [ BIND_DEV= ] do jakiego device przybindować (ma związek z routingiem itp)
+
+ [ TTL= ]
+ [ TOS= ]
+ [ PMTUDISC={no|yes} ]
+
+ if MODE=gre ; then
+
+ [ KEY= ]
+ [ IKEY= ]
+ [ OKEY= ]
+ [ ISEQ={no|yes} ]
+ [ ISEQ={no|yes} ]
+ [ OSEQ={no|yes} ]
+ [ CSUM={no|yes} ]
+ [ ICSUM={no|yes} ]
+ [ OCSUM={no|yes} ]
+ fi
+
+else MODE=four ; then
+
+ REMOTEADDR=<IPv6 addres>
+ LOCALADDR=<IPv6 addres>
+
+ [ PRIORITY= ]
+ [ HOPLIMIT= ]
+ [ ENCAPLIMIT= ]
+fi
--- /dev/null
+MODE=sit
+DEVICE=icm
+REMOTEADDR=193.219.28.246
+LOCALADDR=156.17.210.110
+IPADDR1="3ffe:8010:70::2/126"
+IP6_PRIM_IF=1
+BIND_DEV=eth0
+TTL=64
+ONBOOT=yes
+#TOS=
+#SEQ={no|yes} ]
+#ISEQ={no|yes} ]
+#OSEQ={no|yes} ]
+#KEY= ]
+#IKEY= ]
+#OKEY= ]
+#CSUM={no|yes} ]
+#ICSUM={no|yes} ]
+#OCSUM={no|yes} ]
+#PMTUDISC={no|yes} ]
--- /dev/null
+@SET_MAKE@
+
+SUBDIRS = all ip ipx ppp tnl
+
--- /dev/null
+@SET_MAKE@
+
+allupdir = @updir@/all
+
+allup_SCRIPTS =
+noinst_SCRIPTS = thetouch
+
+EXTRA_DIST = $(allup_SCRIPTS) $(noinst_SCRIPTS)
--- /dev/null
+#! /bin/sh
+# This script will run every time some interface will go up
+# using ifup or ifdown.
+#
+
--- /dev/null
+@SET_MAKE@
+
+ipupdir = @updir@/ip
+
+ipup_SCRIPTS =
+
+EXTRA_DIST = $(ipup_SCRIPTS)
--- /dev/null
+@SET_MAKE@
+
+ipxupdir = @updir@/ipx
+
+ipxup_SCRIPTS =
+
+EXTRA_DIST = $(ipxup_SCRIPTS)
--- /dev/null
+@SET_MAKE@
+
+pppupdir = @updir@/ppp
+
+pppup_SCRIPTS = logger
+
+EXTRA_DIST = $(pppup_SCRIPTS)
--- /dev/null
+#!/bin/sh
+# You can put here anything :)
+#
+echo "+---------------------------------------------------------------+" >> /var/log/ppp.log
+echo " Connect time: $(date) with $PPP_REMOTE " >> /var/log/ppp.log
--- /dev/null
+@SET_MAKE@
+
+tnlupdir = @updir@/tnl
+
+tnlup_SCRIPTS =
+
+EXTRA_DIST = $(tnlup_SCRIPTS)
--- /dev/null
+######################################################################
+# MAIN PART
+
+# Do you need IPv4 or IPv6 networking ?
+NETWORKING=yes
+
+# Do you need IPv4 networking ?
+IPV4_NETWORKING=yes
+
+# Do you want IPv4 forwarding ?
+# then set it in /etc/sysctl.conf
+
+# Set hostname here
+HOSTNAME=pldmachine
+
+# Allow udev to create /etc/sysconfig/interfaces/ifcfg-* automatically?
+# See /lib/udev/net_helper for details.
+AUTOMATIC_IFCFG=no
+
+# Set NIS domain name here if you use NIS
+# Note: DNS domain name should be set in /etc/hosts or DNS/NIS service, not here
+NISDOMAIN=
+
+# Traditional setup of gateway. This is obsolete, consider using static-routes
+# instead. However this is really enough for most users.
+GATEWAY=
+GATEWAYDEV=
+
+# Do you want to use IPX networking ?
+IPX=no
+IPXAUTOPRIMARY=
+IPXAUTOFRAME=
+IPXINTERNALNETNUM=
+IPXINTERNALNODENUM=
+
+# Do you need IPv6 networking ?
+IPV6_NETWORKING=yes
+
+# Do you want IPv6 forwarding ?
+# then set it in /etc/sysctl.conf
+
+# Enable tunnel interfaces configuration ?
+IPV6_TUNNELCONFIG=yes
+
+# Global route for IPv6 host with IPv6 forwarding
+IPV6_GLOBALROUTEGW=
+IPV6_GLOBALROUTEDEV=
+
+# Other
+
+# Do you want set static ARP table (based on /etc/ethers config file) ?
+STATIC_ARP=no
+
+# Do you want set static RARP table (based on /etc/ethers config file) ?
+STATIC_RARP=no
+
+# Specify interface on which you want to enable tleds software
+# (also you need tleds package installed) -- default set to no
+TLEDS_DEV=no
+
+# enable globally for all network interfaces.
+# bring up from hotplug (udev for example) (default to no)
+#HOTPLUG=yes
+
+# set up Zeroconf routes for communication via/with IPv4ALL link-local
+# addresses
+ZEROCONF=yes
+
--- /dev/null
+# dev mac ip state opts
+# eth0 00:80:48:12:c2:3c 192.168.10.10 permanent
+#eth1 00:80:48:12:c2:44 12.12.12.12 permanent
--- /dev/null
+# <IP>[/<mask>] via <IP>
+# 192.168.1.1 via 1.1.1.1
+# 192.168.2.1/24 via 1.1.1.1
--- /dev/null
+# Entry format for ip rule:
+# <rule>
+# Entry format for static route:
+# <device> <network_ip>/<network_mask_length> <other arguments>
+#
+# Combined example:
+
+#from 192.168.2.0/24 table 10
+#eth0 default via 192.168.2.1 table 10
+#
+# route 10.12.0.34 via 192.168.2.3 via any interface
+#any 10.12.0.34 via 192.168.2.3
--- /dev/null
+# IPv6 specific rules and routes
+
+# Entry format for ip rule:
+# <rule>
+# Entry format for static route:
+# <device> <network_ip>/<network_mask_length> <other arguments>
+#
+# Combined example:
+
+#from fec0:2::/32 table 10
+#eth0 default via fec0:2::1 table 10
+#
+# route fec0:12::34 via fec0:2::3 via any interface
+#any fec0:12::34 via fec0:2::3
--- /dev/null
+
+# Do you want colorized starting scripts ?
+COLOR_INIT=yes
+
+# Print status at which column
+#INIT_COL=67
+
+# Do you want fast boot? (without NLS, excessive logging and fancy
+# terminals support)
+FASTRC=no
+
+# Messages with a higher priority than this will be printed
+# to the console (default 1)
+CONSOLE_LOGLEVEL=1
+
+# On errors (when system is starting) run sulogin instead of shell ?
+RUN_SULOGIN_ON_ERR=yes
+
+# Default run nice level for all services if $SERVICE_RUN_NICE_LEVEL is not
+# defined in /etc/sysconfig/<service>.
+DEFAULT_SERVICE_RUN_NICE_LEVEL=+0
+
+# Default limits set before running daemons (hard and soft) if
+# $SERVICE_LIMITS are not defined in /etc/sysconfig/<service>
+#
+# Use "-u" for process limits (automatically translated to "-p" for ksh).
+# Use "-Sx" or "-Hx" to set only soft or hard "x" limit.
+#
+# Advised limits are:
+# "-u unlimited" to make sure daemons will be able to fork;
+# "-c 0" to make sure it doesn't core dump anywhere; while this could mask
+# problems with the daemon, it also closes some security problems;
+# users' limits are set via pam_limits.
+DEFAULT_SERVICE_LIMITS="-u unlimited -c 0"
+
+# Default umask for all services if $SERVICE_UMASK is not defined in
+# /etc/sysconfig/<service>.
+DEFAULT_SERVICE_UMASK=022
+
+# Setup PNP using userspace tools?
+RUN_USERPNP=no
+# Setup kernel space PNP (2.4.x)
+RUN_KERNELPNP=no
+
+# Do not allow users to login when system is starting
+# (but allow when it end "starting" process) ?
+DELAY_LOGIN=yes
+
+# Clean /tmp at startup ?
+CLEAN_TMP=yes
+
+# Try to setup proper symlinks in /boot (based on kernel version) ?
+SET_SLINKS=yes
+
+# Run depmod at startup ?
+# Values:
+# yes/no - as usually
+# ifmissing - if modules.dep is missing
+RUN_DEPMOD=ifmissing
+
+# Run /sbin/ldconfig at startup ?
+RUN_LDCONFIG=no
+
+# Start udev (udev-core required)?
+START_UDEV=yes
+
+# EVMS/LVM options
+# Extensible Firmware Interface GUID Partition Table segment manager
+EVMS_GUID_PTABLE=no
+
+# Use EVMS for Linux LVM volumes
+EVMS_LVM=no
+
+# Create symlinks for LVM volumes (/dev/evms/lvm/* -> /dev/*)
+EVMS_LVM_COMPAT_NODES=yes
+
+# EVMS AIX LVM volumes
+EVMS_AIX=no
+
+# EVMS OS/2 LVM volumes
+EVMS_OS2=no
+
+# Set to 'yes' to allow probing for devices with swap signatures
+AUTOSWAP=no
+
+# LVM2
+# disable if your only LVM volume is rootfs started on initrd and want faster startup
+LVM2=yes
+
+# DMRAID
+# disable if do not want DMRAID being initalized by rc.sysinit
+DMRAID=yes
+
+# mdadm
+# disable if do not want mdadm being initalized by rc.sysinit
+MDADM=yes
+
+# Disable dm-multipath and friends here if you plan to use
+# non standard drivers (ex. DELL MPP RDAC driver)
+DM_MULTIPATH=yes
+
+# Set to anything other than 'no' to allow hotkey interactive startup...
+RC_PROMPT=yes
+
+# List of chroots separated by space (to handle processes inside/outside
+# chroot properly)
+#SYSTEM_CHROOTS=
+
+# List (space separated) of special mount points that must not be unmounted
+# on system shutdown.
+# May contain regular expressions (eg. "/dev/rootunion/.*")
+#UMOUNT_IGNORE=
+
+# Enable cpusets support?
+CPUSETS=no
+
+# Enable this system as vserver guest (yes/no/detect)
+VSERVER=detect
+
+# Vserver isolation only networking inside of guest (yes/no/detect)
+VSERVER_ISOLATION_NET=detect
+
+# Enable selinux support (yes/no/detect)
+# 'yes' behaves as 'detect'
+SELINUX=detect
+
+# Enable HWPROFILES support?
+HWPROFILES=no
+
+# Enable syslogging for rc-scripts
+RC_LOGGING=yes
+
+# Include machine uptime counter in all show messages
+RC_UPTIME=no
+
+# Disable console logging by blogd
+RC_BOOTLOG=yes
--- /dev/null
+### IPV4 NETWORKING
+
+# Disables IPv4 packet forwarding
+net.ipv4.ip_forward = 0
+
+# Enables source route verification
+net.ipv4.conf.all.rp_filter = 1
+net.ipv4.conf.default.rp_filter = 1
+
+# Accept ICMP redirect messages (suggested 1 for hosts and 0 for routers)
+# net.ipv4.conf.all.accept_redirects = 1
+
+# Accept source routed packages (suggested 0 for hosts and 1 for routers)
+# net.ipv4.conf.all.accept_source_route = 1
+
+# Log packets with source addresses with no known route to kernel log
+# net.ipv4.conf.all.log_martians = 1
+
+# Do multicast routing ? The kernel needs to be compiled with
+# CONFIG_MROUTE and a multicast routing daemon is required.
+# net.ipv4.conf.all.mc_forwarding = 1
+
+# If you get message "Neighbour table overflow" try to play with this values.
+# Needed in huge networks. These example values are sufficent in networks with
+# mask 21.
+# net.ipv4.neigh.default.gc_thresh3 = 4096
+# net.ipv4.neigh.default.gc_thresh2 = 2048
+# net.ipv4.neigh.default.gc_thresh1 = 512
+# net.ipv6.neigh.default.gc_thresh3 = 1024
+# net.ipv6.neigh.default.gc_thresh2 = 512
+# net.ipv6.neigh.default.gc_thresh1 = 128
+
+# Do proxy ARP ?
+# net.ipv4.conf.all.proxy_arp = 1
+
+# Accept ICMP redirect messages only for gateways, listed in
+# default gateway list ?
+# net.ipv4.conf.all.secure_redirects = 1
+
+# Send ICMP redirects to other hosts ?
+# net.ipv4.conf.all.send_redirects = 1
+
+# Ignore all ICMP echo requests ?
+# net.ipv4.icmp_echo_ignore_all = 1
+
+# Ignore ICMP echo requests to broadcast and multicast addresses ?
+# net.ipv4.icmp_echo_ignore_broadcasts = 1
+
+# Enable MTU discovery patch ? (KERNEL MUST SUPPORT THIS)
+# MTU (maximal transfer unit) is the size of the chunks we send out
+# over the net. "Path MTU Discovery" means that, instead of always
+# sending very small chunks, we start out sending big ones and if we
+# then discover that some host along the way likes its chunks smaller,
+# we adjust to a smaller size.
+# net.ipv4.ip_no_pmtu_disc = 1
+
+# Enable debugging of IP masquerading ?
+# net.ipv4.ip_masq_debug = 1
+
+# Bug-to-bug compatibility with some broken printers. On retransmit
+# try to send bigger packets to work around bugs in certain TCP
+# stacks. Can be turned off by setting IPV4_RETRANS_COLLAPSE to ,,yes''.
+# net.ipv4.tcp_retrans_collapse = 1
+
+# Disable select acknowledgments after RFC2018 ?
+# TCP may experience poor performance when multiple packets are lost
+# from one window of data. With the limited information available
+# from cumulative acknowledgments, a TCP sender can only learn about a
+# single lost packet per round trip time. An aggressive sender could
+# choose to retransmit packets early, but such retransmitted segments
+# may have already been successfully received.
+# net.ipv4.tcp_sack = 0
+
+# Disable timestamps as defined in RFC1323 ?
+# Timestamps are designed to provide compatible interworking with
+# TCP's that do not implement the TCP Extensions for High Performance
+# net.ipv4.tcp_timestamps = 0
+
+# Enable the strict RFC793 interpretation of the TCP urgent pointer field.
+# net.ipv4.tcp_stdurg = 1
+
+# Enable tcp_syncookies
+# net.ipv4.tcp_syncookies = 1
+
+# Disable window scaling as defined in RFC1323 ?
+# The window scale extension expands the definition of the TCP
+# window to 32 bits and then uses a scale factor to carry this
+# 32-bit value in the 16-bit Window field of the TCP header.
+# net.ipv4.tcp_window_scaling = 0
+
+# Enable dynamic socket address rewriting on interface address change.
+# This is useful for dialup interface with changing IP addresses.
+# sys.net.ipv4.ip_dynaddr = 7
+
+# Range of ports used by TCP and UDP to choose the local
+# port. Contains two numbers, the first number is the lowest port,
+# the second number the highest local port. Default is "1024 4999".
+# Should be changed to "32768 61000" for high-usage systems.
+# net.ipv4.ip_local_port_range = 4096 61000
+
+# Disables automatic defragmentation (needed for masquerading, LVS)
+# Non existant on Linux 2.4
+# net.ipv4.ip_always_defrag = 0
+
+### IPV6 NETWORKING
+
+# Disables IPv6 packet forwarding
+# net.ipv6.conf.all.forwarding = 0
+
+# Do you want IPv6 address autoconfiguration? Kernel default is yes.
+# net.ipv6.conf.all.autoconf = 0
+# net.ipv6.conf.default.autoconf = 0
+
+# Do you want kernel to add default route for IPv6 interfaces if
+# there is no router on the link? Kernel default is yes.
+# Kernel 2.4.0-test? or later (after ANK accepts my patch - baggins).
+# net.ipv6.conf.all.autoconf_route = 0
+
+### OTHER SETTINGS
+
+# Adjust number of inodes and file handles available in the system.
+# If you have a havily loaded system and kernel complains about
+# file/inode limit reached in VFS, increase this 2x. The default
+# value is 4096 (file) and 8192 (inode). The inode number should be
+# always 2-3 times the file number. For most systems this should not
+# be changed
+# fs.file-max = 8192
+# fs.inode-max = 16384
+
+# Controls whether core dumps will append the PID to the core filename.
+# Useful for debugging multi-threaded applications.
+#kernel.core_uses_pid = 1
+
+# Enable the magic-sysrq key
+kernel.sysrq = 1
+
+# After how many seconds reboot system after kernel panic?
+# 0 - never reboot system (suggested 60)
+#kernel.panic = 60
+
+#
+# GRSECURITY http://www.grsecurity.org
+#
+# WARNING!
+# These values are SET ONCE!
+#
+#kernel.grsecurity.linking_restrictions = 1
+#kernel.grsecurity.fifo_restrictions = 1
+#kernel.grsecurity.destroy_unused_shm = 0
+#kernel.grsecurity.chroot_caps = 0
+#kernel.grsecurity.chroot_deny_chmod = 0
+#kernel.grsecurity.chroot_deny_chroot = 1
+#kernel.grsecurity.chroot_deny_fchdir = 0
+#kernel.grsecurity.chroot_deny_mknod = 1
+#kernel.grsecurity.chroot_deny_mount = 1
+#kernel.grsecurity.chroot_deny_pivot = 1
+#kernel.grsecurity.chroot_deny_shmat = 0
+#kernel.grsecurity.chroot_deny_sysctl = 1
+#kernel.grsecurity.chroot_deny_unix = 0
+#kernel.grsecurity.chroot_enforce_chdir = 0
+#kernel.grsecurity.chroot_execlog = 0
+#kernel.grsecurity.chroot_findtask = 1
+#kernel.grsecurity.chroot_restrict_nice = 0
+
+#kernel.grsecurity.exec_logging = 0
+#kernel.grsecurity.signal_logging = 1
+#kernel.grsecurity.forkfail_logging = 0
+#kernel.grsecurity.timechange_logging = 1
+#kernel.grsecurity.audit_chdir = 0
+#kernel.grsecurity.audit_gid = 65505
+#kernel.grsecurity.audit_group = 0
+#kernel.grsecurity.audit_ipc = 0
+#kernel.grsecurity.audit_mount = 0
+
+#kernel.grsecurity.execve_limiting = 1
+#kernel.grsecurity.dmesg = 1
+#kernel.grsecurity.tpe = 1
+#kernel.grsecurity.tpe_gid = 65500
+#kernel.grsecurity.tpe_glibc = 0
+#kernel.grsecurity.tpe_restrict_all = 0
+
+#kernel.grsecurity.rand_pids = 1
+#kernel.grsecurity.socket_all = 1
+#kernel.grsecurity.socket_all_gid = 65501
+#kernel.grsecurity.socket_client = 1
+#kernel.grsecurity.socket_client_gid = 65502
+#kernel.grsecurity.socket_server = 1
+#kernel.grsecurity.socket_server_gid = 65503
+
+#kernel.grsecurity.disable_modules = 0
+#kernel.grsecurity.grsec_lock = 0
+
+# kernel.randomize_va_space = 2
+# 0 - Turn the process address space randomization off by default.
+# 1 - Conservative address space randomization makes the addresses of
+# mmap base and VDSO page randomized. This, among other things,
+# implies that shared libraries will be loaded to random addresses.
+# Also for PIE binaries, the location of code start is randomized.
+# 2 - This includes all the features that Conservative randomization
+# provides. In addition to that, also start of the brk area is randomized.
+# There a few legacy applications out there (such as some ancient
+# versions of libc.so.5 from 1996) that assume that brk area starts
+# just after the end of the code+bss. These applications break when
+# start of the brk area is randomized. There are however no known
+# non-legacy applications that would be broken this way, so for most
+# systems it is safe to choose Full randomization.
+
+# for mplayer
+#dev.rtc.max-user-freq = 1024
+#
--- /dev/null
+#!/bin/sh
+
+# from man sh:
+
+# NOTE: $(command) expressions are currently parsed by finding the matching paren-
+# thesis, regardless of quoting. This will hopefully be fixed soon.
+
+# this script file will finally tell when 'soon' comes
+
+a=1
+
+ret_old=`
+case $a in
+ 0) echo "a=0";;
+ 1) echo "a=1";;
+ *) echo "a!=[01]";;
+esac
+`
+
+ret_new=$(
+case $a in
+ 0) echo "a=0";;
+ 1) echo "a=1";;
+ *) echo "a!=[01]";;
+esac
+)
+
+echo "$ret_old vs $ret_new"
\ No newline at end of file
--- /dev/null
+#!/bin/sh
+
+# broken check with --pidfile specified:
+#
+# $ (. /etc/rc.d/init.d/functions; status --pidfile /var/run/naviagent/agent.pid naviagent)
+# naviagent (pid 12788) is running...
+#
+# $ ls -l /proc/`cat /var/run/naviagent/agent.pid`
+# ls: cannot access /proc/12788: No such file or directory
+
+lib=$(dirname "$0")/..
+tmp=$(mktemp -d)
+
+# TODO: rc_cache_init should be able to use tmp dir, not real root
+. $lib/lib/functions
+
+# first unused pid
+pid=9999999 # may not exist
+procname=testd # irrelevant
+pidfile=$tmp/agent.pid
+
+if [ -d /proc/$pid ]; then
+ echo >&2 "bad pid chosen for test, /proc/$pid exists"
+ exit 1
+fi
+
+echo $pid > $pidfile
+status --pidfile $pidfile $procname
+rc=$?
+if [ $rc = 0 ]; then
+ echo "FAIL: should not say process is running"
+ rv=1
+else
+ echo "OK: process is not running"
+ rv=0
+fi
+
+rm -rf $tmp
+exit $rv
TLD / rc-scripts.git / commitdiff